! Started logfile: 0014+813_S.log on Fri Jan 11 15:11:03 2008
observe 0014+813_S.edt
! Reading UV FITS file: 0014+813_S.edt
! AN table 1: 242 integrations on 136 of 136 possible baselines.
! AN table 2: 223 integrations on 136 of 136 possible baselines.
! Apparent sampling: 0.281831 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 0014+813
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22497e+09        8e+06          1        8e+06
!  02        2  2.24497e+09        8e+06          1        8e+06
!  03        3  2.33497e+09        8e+06          1        8e+06
!  04        4  2.36497e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1251 lines of history.
! 
! Reading 71292 visibilities.
![@gonzo7-0.4 0014+813_S]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.4
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 7.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3423 telescope corrections were flagged in sub-array 1.
!  A total of 2815 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 3431 telescope corrections were flagged in sub-array 1.
!  A total of 2828 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 3432 telescope corrections were flagged in sub-array 1.
!  A total of 2817 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 3459 telescope corrections were flagged in sub-array 1.
!  A total of 2815 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=0.488410Jy  sigma=0.005848
! Fit after  self-cal, rms=0.486526Jy  sigma=0.005872
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.065 mas, bmaj=2.257 mas, bpa=-83.17 degrees
! Estimated noise=904.281 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.396116 Jy
! Total flux subtracted in 50 components = 0.396116 Jy
! Clean residual min=-0.015847 max=0.110529 Jy/beam
! Clean residual mean=-0.000073 rms=0.003527 Jy/beam
! Combined flux in latest and established models = 0.396116 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.396116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.213204Jy  sigma=0.002841
! Fit after  self-cal, rms=0.213204Jy  sigma=0.002841
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0908911 Jy
! Total flux subtracted in 50 components = 0.0908911 Jy
! Clean residual min=-0.011452 max=0.043778 Jy/beam
! Clean residual mean=-0.000053 rms=0.002459 Jy/beam
! Combined flux in latest and established models = 0.487007 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.487007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165865Jy  sigma=0.002161
! Fit after  self-cal, rms=0.165868Jy  sigma=0.002161
! Inverting map 
! Added new window around map position (-1.2, -4.8).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0443274 Jy
! Total flux subtracted in 50 components = 0.0443274 Jy
! Clean residual min=-0.009499 max=0.034322 Jy/beam
! Clean residual mean=-0.000044 rms=0.002138 Jy/beam
! Combined flux in latest and established models = 0.531334 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.531334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150851Jy  sigma=0.001919
! Fit after  self-cal, rms=0.150280Jy  sigma=0.001915
! Inverting map 
! Added new window around map position (-1.6, -8.8).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0339502 Jy
! Total flux subtracted in 50 components = 0.0339502 Jy
! Clean residual min=-0.008520 max=0.017886 Jy/beam
! Clean residual mean=-0.000037 rms=0.001891 Jy/beam
! Combined flux in latest and established models = 0.565285 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 17 components and 0.565285 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140169Jy  sigma=0.001748
! Fit after  self-cal, rms=0.139721Jy  sigma=0.001745
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0242766 Jy
! Total flux subtracted in 50 components = 0.0242766 Jy
! Clean residual min=-0.007756 max=0.015020 Jy/beam
! Clean residual mean=-0.000033 rms=0.001748 Jy/beam
! Combined flux in latest and established models = 0.589561 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 0.589561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133635Jy  sigma=0.001639
! Fit after  self-cal, rms=0.133388Jy  sigma=0.001638
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0194991 Jy
! Total flux subtracted in 50 components = 0.0194991 Jy
! Clean residual min=-0.007189 max=0.013226 Jy/beam
! Clean residual mean=-0.000029 rms=0.001653 Jy/beam
! Combined flux in latest and established models = 0.60906 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 32 components and 0.60906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129005Jy  sigma=0.001559
! Fit after  self-cal, rms=0.128836Jy  sigma=0.001558
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161703 Jy
! Total flux subtracted in 50 components = 0.0161703 Jy
! Clean residual min=-0.006683 max=0.011884 Jy/beam
! Clean residual mean=-0.000026 rms=0.001582 Jy/beam
! Combined flux in latest and established models = 0.625231 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 36 components and 0.625231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.125597Jy  sigma=0.001499
! Fit after  self-cal, rms=0.125484Jy  sigma=0.001498
! Inverting map 
! Added new window around map position (0.4, 5.2).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141567 Jy
! Total flux subtracted in 50 components = 0.0141567 Jy
! Clean residual min=-0.006398 max=0.008890 Jy/beam
! Clean residual mean=-0.000023 rms=0.001528 Jy/beam
! Combined flux in latest and established models = 0.639387 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 49 components and 0.639387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122935Jy  sigma=0.001452
! Fit after  self-cal, rms=0.122909Jy  sigma=0.001452
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.589 mas, bmaj=3.044 mas, bpa=-88.59 degrees
! Estimated noise=418.508 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0339745 Jy
! Component: 100  -  total flux cleaned = 0.057283 Jy
! Total flux subtracted in 100 components = 0.057283 Jy
! Clean residual min=-0.007138 max=0.014131 Jy/beam
! Clean residual mean=-0.000158 rms=0.002170 Jy/beam
! Combined flux in latest and established models = 0.69667 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 48 model components to the UV plane model.
! The established model now contains 77 components and 0.69667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.114956Jy  sigma=0.001300
! Fit after  self-cal, rms=0.114623Jy  sigma=0.001297
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0181603 Jy
! Component: 100  -  total flux cleaned = 0.0313187 Jy
! Total flux subtracted in 100 components = 0.0313187 Jy
! Clean residual min=-0.006073 max=0.009326 Jy/beam
! Clean residual mean=-0.000103 rms=0.001580 Jy/beam
! Combined flux in latest and established models = 0.727989 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 97 components and 0.727989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112128Jy  sigma=0.001249
! Fit after  self-cal, rms=0.112028Jy  sigma=0.001247
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 93 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     GC        0.99     HN        0.98     
!   KK        1.06     KP        0.88     LA        0.98     MC        1.03     
!   MK        0.99     NL        0.96     NY        1.00     ON        0.97     
!   OV        0.96     PT        1.02     SC        0.98     WF        1.05     
!   WZ        0.93     
! 
!  A total of 33 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        1.03     GC        1.02     HN        0.99     
!   KK        1.00     KP        0.87     LA        0.98     MC        1.09     
!   MK        1.03     NL        1.00     NY        1.02     ON        1.04     
!   OV        1.02     PT        1.02     SC        0.98     WF        1.03     
!   WZ        0.99     
! 
! 
! Correcting IF 2.
!  A total of 78 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     GC        0.97     HN        1.01     
!   KK        1.05     KP        0.95     LA        1.01     MC        1.04     
!   MK        1.02     NL        1.13     NY        1.00     ON        0.96     
!   OV        0.94     PT        0.95     SC        1.05     WF        1.02     
!   WZ        0.90     
! 
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        1.00     GC        0.99     HN        1.00     
!   KK        0.97     KP        0.95     LA        0.98     MC        1.27     
!   MK        1.01     NL        1.11     NY        1.01     ON        1.01     
!   OV        0.96     PT        0.96     SC        1.08     WF        1.05     
!   WZ        0.96     
! 
! 
! Correcting IF 3.
!  A total of 93 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     GC        0.98     HN        1.09     
!   KK        1.05     KP        1.00     LA        0.95     MC        1.24     
!   MK        0.94     NL        1.05     NY        1.03     ON        0.99     
!   OV        0.97     PT        0.99     SC        1.09     WF        1.03     
!   WZ        0.89     
! 
!  A total of 30 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        0.98     GC        1.01     HN        1.08     
!   KK        0.99     KP        1.01     LA        0.95     MC        1.17     
!   MK        0.96     NL        1.10     NY        1.04     ON        1.03     
!   OV        1.03     PT        1.00     SC        1.11     WF        1.06     
!   WZ        0.94     
! 
! 
! Correcting IF 4.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     GC        1.02     HN        1.07     
!   KK        1.04     KP        1.00     LA        0.91     MC        1.31     
!   MK        0.93     NL        1.13     NY        1.02     ON        1.01     
!   OV        0.85     PT        0.97     SC        1.12     WF        1.05     
!   WZ        0.89     
! 
!  A total of 36 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        0.92     GC        1.02     HN        1.06     
!   KK        1.03     KP        1.02     LA        0.90     MC        1.39     
!   MK        0.93     NL        1.12     NY        1.01     ON        1.04     
!   OV        0.97     PT        1.00     SC        1.12     WF        1.07     
!   WZ        0.94     
! 
! 
! Fit before self-cal, rms=0.112028Jy  sigma=0.001247
! Fit after  self-cal, rms=0.103720Jy  sigma=0.001134
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.598 mas, bmaj=3.038 mas, bpa=89.53 degrees
! Estimated noise=414.764 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, -10.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00567985 Jy
! Component: 100  -  total flux cleaned = 0.00821881 Jy
! Total flux subtracted in 100 components = 0.00821881 Jy
! Clean residual min=-0.002817 max=0.003067 Jy/beam
! Clean residual mean=-0.000015 rms=0.000654 Jy/beam
! Combined flux in latest and established models = 0.736208 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 111 components and 0.736208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103451Jy  sigma=0.001129
! Fit after  self-cal, rms=0.103455Jy  sigma=0.001129
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135557 Jy
! Component: 100  -  total flux cleaned = 0.00226752 Jy
! Total flux subtracted in 100 components = 0.00226752 Jy
! Clean residual min=-0.002801 max=0.002917 Jy/beam
! Clean residual mean=-0.000011 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.738476 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 122 components and 0.738476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103361Jy  sigma=0.001127
! Fit after  self-cal, rms=0.100771Jy  sigma=0.001093
! Inverting map and beam 
! Estimated beam: bmin=2.59 mas, bmaj=3.04 mas, bpa=-89.46 degrees
! Estimated noise=415.226 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.2, -6.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00319245 Jy
! Component: 100  -  total flux cleaned = 0.004336 Jy
! Total flux subtracted in 100 components = 0.004336 Jy
! Clean residual min=-0.002527 max=0.002696 Jy/beam
! Clean residual mean=-0.000011 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.742812 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 130 components and 0.742812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100659Jy  sigma=0.001091
! Fit after  self-cal, rms=0.100659Jy  sigma=0.001091
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 0014+813_S
! Writing UV FITS file: 0014+813_S.uvf
! Writing 130 model components to file: 0014+813_S.mod
! wwins: Wrote 6 windows to 0014+813_S.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.59 x 3.04 at -89.46 degrees (North through East)
! Clean map  min=-0.0024597  max=0.52066 Jy/beam
! Writing clean map to FITS file: 0014+813_S.fits
! Writing difmap environment to: 0014+813_S.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 0014+813_S]
device 0014+813_Suv.ps/vps,1,2
! Attempting to open device: '0014+813_Suv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 0014+813_Sim.ps/vps
! Attempting to open device: '0014+813_Sim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=2.59 mas, bmaj=3.04 mas, bpa=-89.46 degrees
! Estimated noise=415.226 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.59 x 3.04 at -89.46 degrees (North through East)
! Clean map  min=-0.0024597  max=0.52066 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo7-0.4]
quit
! Quitting program
! Log file 0014+813_S.log closed on Fri Jan 11 15:11:19 2008