! Started logfile: J1217+5835_K_2006_06_04_yyk_uvs.log on Thu Jul 8 23:43:35 2010 obs J1217+5835_K_2006_06_04_yyk_uva.fits ! Reading UV FITS file: J1217+5835_K_2006_06_04_yyk_uva.fits ! AN table 1: 1680 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.788823 visibilities/baseline/integration-bin. ! Found source: J1217+5835 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.42136e+10 8e+06 1 8e+06 ! 02 2 2.42266e+10 8e+06 1 8e+06 ! 03 3 2.42656e+10 8e+06 1 8e+06 ! 04 4 2.43436e+10 8e+06 1 8e+06 ! 05 5 2.44866e+10 8e+06 1 8e+06 ! 06 6 2.45906e+10 8e+06 1 8e+06 ! 07 7 2.46556e+10 8e+06 1 8e+06 ! 08 8 2.46816e+10 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2921 lines of history. ! ! Reading 381664 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ![@muppet J1217+5835_K_2006_06_04_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 3 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=3 float phase_soltime2 phase_soltime2=0.3 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.70 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 10 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.0650x0.0650 milli-arcsec cellsize. uvav time_av, true ! Averaging into 10 second bins. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.250154 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.3616 mas, bmaj=0.6942 mas, bpa=7.266 degrees ! Estimated noise=4.28424 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0685424 Jy ! Component: 100 - total flux cleaned = 0.0923982 Jy ! Total flux subtracted in 100 components = 0.0923982 Jy ! Clean residual min=-0.022681 max=0.025398 Jy/beam ! Clean residual mean=-0.000134 rms=0.006822 Jy/beam ! Combined flux in latest and established models = 0.0923982 Jy ! Performing phase self-cal over 3 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0923982 Jy ! ! Correcting IF 1. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 144 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 144 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.227012Jy sigma=1.109348 ! Fit after self-cal, rms=0.225931Jy sigma=1.103836 ! Inverting map and beam ! Estimated beam: bmin=0.3617 mas, bmaj=0.6942 mas, bpa=7.258 degrees ! Estimated noise=4.28857 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.4545 mas, bmaj=0.7552 mas, bpa=5.595 degrees ! Estimated noise=3.18196 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0339053 Jy ! Component: 100 - total flux cleaned = 0.0494716 Jy ! Component: 150 - total flux cleaned = 0.0583506 Jy ! Component: 200 - total flux cleaned = 0.0635141 Jy ! Total flux subtracted in 200 components = 0.0635141 Jy ! Clean residual min=-0.019437 max=0.030508 Jy/beam ! Clean residual mean=-0.000174 rms=0.007021 Jy/beam ! Combined flux in latest and established models = 0.155912 Jy ! Performing phase self-cal over 3 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 43 components and 0.155912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.221559Jy sigma=1.075933 ! Fit after self-cal, rms=0.221348Jy sigma=1.074713 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.4545 x 0.7552 at 5.595 degrees (North through East) ! Clean map min=-0.019161 max=0.090259 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.68 KP 1.00* LA 1.00* ! MK 1.00* NL 0.78 OV 1.00* PT 0.94 ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.11 FD 1.09 KP 0.86 LA 0.86 ! MK 3.07 NL 1.00* OV 2.12 PT 0.70 ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.70 KP 0.96 LA 0.96 ! MK 0.82 NL 1.00 OV 4.82 PT 1.23 ! SC 1.50 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.08 KP 1.09 LA 0.79 ! MK 1.00* NL 1.57 OV 1.40 PT 0.95 ! SC 1.00* ! ! ! Correcting IF 5. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* KP 0.00* LA 0.00* ! MK 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* ! ! ! Correcting IF 6. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* KP 0.00* LA 0.00* ! MK 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* ! ! ! Correcting IF 7. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* KP 0.00* LA 0.00* ! MK 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* KP 0.00* LA 0.00* ! MK 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* ! ! ! Fit before self-cal, rms=0.221348Jy sigma=1.074713 ! Fit after self-cal, rms=0.412222Jy sigma=1.043729 selfcal false, false, phase_soltime ! Performing phase self-cal over 3 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.412222Jy sigma=1.043729 ! Fit after self-cal, rms=0.412325Jy sigma=1.042308 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.4208 mas, bmaj=0.7615 mas, bpa=10.01 degrees ! Estimated noise=3.39995 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00284415 Jy ! Component: 100 - total flux cleaned = -0.00270917 Jy ! Component: 150 - total flux cleaned = -0.00235964 Jy ! Component: 200 - total flux cleaned = -0.00215218 Jy ! Total flux subtracted in 200 components = -0.00215218 Jy ! Clean residual min=-0.013037 max=0.014546 Jy/beam ! Clean residual mean=-0.000113 rms=0.003794 Jy/beam ! Combined flux in latest and established models = 0.15376 Jy ! Performing phase self-cal over 3 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 48 components and 0.15376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.412371Jy sigma=1.041298 ! Fit after self-cal, rms=0.412251Jy sigma=1.040536 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.3 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.412251Jy sigma=1.040536 ! Fit after self-cal, rms=0.406539Jy sigma=1.007526 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00870943 Jy ! Component: 100 - total flux cleaned = 0.0102085 Jy ! Component: 150 - total flux cleaned = 0.0108642 Jy ! Component: 200 - total flux cleaned = 0.0111911 Jy ! Total flux subtracted in 200 components = 0.0111911 Jy ! Clean residual min=-0.012600 max=0.015489 Jy/beam ! Clean residual mean=-0.000094 rms=0.003770 Jy/beam ! Combined flux in latest and established models = 0.164951 Jy ! Performing phase self-cal over 0.3 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.164951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.405975Jy sigma=1.005153 ! Fit after self-cal, rms=0.404691Jy sigma=0.997886 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.4208 x 0.7615 at 10.01 degrees (North through East) ! Clean map min=-0.011471 max=0.094226 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 180 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9408 mas, bmaj=1.057 mas, bpa=23.13 degrees ! Estimated noise=4.03536 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457884 Jy ! Component: 100 - total flux cleaned = 0.00460418 Jy ! Component: 150 - total flux cleaned = 0.00462297 Jy ! Component: 200 - total flux cleaned = 0.00471154 Jy ! Total flux subtracted in 200 components = 0.00471154 Jy ! Clean residual min=-0.014631 max=0.016197 Jy/beam ! Clean residual mean=-0.000163 rms=0.004435 Jy/beam ! Combined flux in latest and established models = 0.169663 Jy ! Performing phase self-cal over 0.3 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.169663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.404503Jy sigma=0.998129 ! Fit after self-cal, rms=0.403676Jy sigma=0.994326 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.3446 mas, bmaj=0.6857 mas, bpa=7.456 degrees ! Estimated noise=5.19187 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0976046 Jy ! Component: 100 - total flux cleaned = 0.13122 Jy ! Component: 150 - total flux cleaned = 0.150297 Jy ! Component: 200 - total flux cleaned = 0.162019 Jy ! Total flux subtracted in 200 components = 0.162019 Jy ! Clean residual min=-0.020214 max=0.022980 Jy/beam ! Clean residual mean=-0.000101 rms=0.005923 Jy/beam ! Combined flux in latest and established models = 0.162019 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.162019 Jy ! Inverting map and beam ! Estimated beam: bmin=0.4208 mas, bmaj=0.7615 mas, bpa=10.01 degrees ! Estimated noise=3.39995 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374965 Jy ! Component: 100 - total flux cleaned = 0.00488719 Jy ! Component: 150 - total flux cleaned = 0.00542961 Jy ! Component: 200 - total flux cleaned = 0.00565583 Jy ! Total flux subtracted in 200 components = 0.00565583 Jy ! Clean residual min=-0.011505 max=0.015456 Jy/beam ! Clean residual mean=-0.000100 rms=0.003728 Jy/beam ! Combined flux in latest and established models = 0.167674 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.167674 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 180 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9408 mas, bmaj=1.057 mas, bpa=23.13 degrees ! Estimated noise=4.03536 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00392491 Jy ! Component: 100 - total flux cleaned = 0.00390891 Jy ! Component: 150 - total flux cleaned = 0.00373936 Jy ! Component: 200 - total flux cleaned = 0.00382338 Jy ! Total flux subtracted in 200 components = 0.00382338 Jy ! Clean residual min=-0.014349 max=0.016215 Jy/beam ! Clean residual mean=-0.000166 rms=0.004404 Jy/beam ! Combined flux in latest and established models = 0.171498 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 39 components and 0.171498 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.4208 mas, bmaj=0.7615 mas, bpa=10.01 degrees ! Estimated noise=3.39995 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00266503 Jy ! Component: 100 - total flux cleaned = -0.0025429 Jy ! Component: 150 - total flux cleaned = -0.00243561 Jy ! Component: 200 - total flux cleaned = -0.00243174 Jy ! Total flux subtracted in 200 components = -0.00243174 Jy ! Clean residual min=-0.012316 max=0.015268 Jy/beam ! Clean residual mean=-0.000093 rms=0.003721 Jy/beam ! Combined flux in latest and established models = 0.169066 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.3 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.169066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.403513Jy sigma=0.993818 ! Fit after self-cal, rms=0.403111Jy sigma=0.991339 wmodel J1217+5835_K_2006_06_04_yyk\_map.mod ! Writing 44 model components to file: J1217+5835_K_2006_06_04_yyk_map.mod wobs J1217+5835_K_2006_06_04_yyk\_uvs.fits ! Writing UV FITS file: J1217+5835_K_2006_06_04_yyk_uvs.fits wwins J1217+5835_K_2006_06_04_yyk\_map.win ! wwins: Wrote 1 windows to J1217+5835_K_2006_06_04_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00643647 Jy ! Component: 100 - total flux cleaned = 0.0073194 Jy ! Component: 150 - total flux cleaned = 0.00732201 Jy ! Component: 200 - total flux cleaned = 0.0080012 Jy ! Component: 250 - total flux cleaned = 0.00863082 Jy ! Component: 300 - total flux cleaned = 0.00893262 Jy ! Component: 350 - total flux cleaned = 0.00893428 Jy ! Component: 400 - total flux cleaned = 0.00879408 Jy ! Component: 450 - total flux cleaned = 0.00878887 Jy ! Component: 500 - total flux cleaned = 0.00878708 Jy ! Component: 550 - total flux cleaned = 0.00901741 Jy ! Component: 600 - total flux cleaned = 0.00923785 Jy ! Component: 650 - total flux cleaned = 0.00902697 Jy ! Component: 700 - total flux cleaned = 0.0095374 Jy ! Component: 750 - total flux cleaned = 0.00963593 Jy ! Component: 800 - total flux cleaned = 0.00963562 Jy ! Component: 850 - total flux cleaned = 0.00991618 Jy ! Component: 900 - total flux cleaned = 0.00991577 Jy ! Component: 950 - total flux cleaned = 0.00973658 Jy ! Component: 1000 - total flux cleaned = 0.00947391 Jy ! Component: 1050 - total flux cleaned = 0.0088756 Jy ! Component: 1100 - total flux cleaned = 0.00845422 Jy ! Component: 1150 - total flux cleaned = 0.00787054 Jy ! Component: 1200 - total flux cleaned = 0.0074585 Jy ! Component: 1250 - total flux cleaned = 0.00672276 Jy ! Component: 1300 - total flux cleaned = 0.00615625 Jy ! Component: 1350 - total flux cleaned = 0.00567443 Jy ! Component: 1400 - total flux cleaned = 0.00495703 Jy ! Component: 1450 - total flux cleaned = 0.00440319 Jy ! Component: 1500 - total flux cleaned = 0.0036952 Jy ! Component: 1550 - total flux cleaned = 0.00306913 Jy ! Component: 1600 - total flux cleaned = 0.00236584 Jy ! Component: 1650 - total flux cleaned = 0.00166386 Jy ! Component: 1700 - total flux cleaned = 0.00104094 Jy ! Component: 1750 - total flux cleaned = 0.000496401 Jy ! Component: 1800 - total flux cleaned = -0.000203372 Jy ! Component: 1850 - total flux cleaned = -0.000902251 Jy ! Component: 1900 - total flux cleaned = -0.00152432 Jy ! Component: 1950 - total flux cleaned = -0.00199172 Jy ! Component: 2000 - total flux cleaned = -0.0025379 Jy ! Total flux subtracted in 2048 components = -0.00292966 Jy ! Clean residual min=-0.004790 max=0.004666 Jy/beam ! Clean residual mean=-0.000012 rms=0.001488 Jy/beam ! Combined flux in latest and established models = 0.166136 Jy keep ! Adding 118 model components to the UV plane model. ! The established model now contains 162 components and 0.166137 Jy ![Exited script file: muppet] wmap "J1217+5835_K_2006_06_04_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.4208 x 0.7615 at 10.01 degrees (North through East) ! Clean map min=-0.0089585 max=0.093111 Jy/beam ! Writing clean map to FITS file: J1217+5835_K_2006_06_04_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0931112 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00145106 device "J1217+5835_K_2006_06_04_yyk\_map.eps/VPS" ! Attempting to open device: 'J1217+5835_K_2006_06_04_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.67525 4.67525 9.3505 18.701 37.402 74.804 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0043 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.093 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.4208 x 0.7615 at 10.01 degrees (North through East) ! Clean map min=-0.0089585 max=0.093111 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1217+5835_K_2006_06_04_yyk\_map.gif/gif" ! Attempting to open device: 'J1217+5835_K_2006_06_04_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1217+5835_K_2006_06_04_yyk_uvs.log closed on Thu Jul 8 23:43:36 2010