! Started logfile: J0646+4451_K_2006_10_20_yyk_uvs.log on Thu Jul  8 23:40:56 2010
obs J0646+4451_K_2006_10_20_yyk_uva.fits
! Reading UV FITS file: J0646+4451_K_2006_10_20_yyk_uva.fits
! AN table 1: 1633 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.88516 visibilities/baseline/integration-bin.
! Found source: J0646+4451
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.42136e+10        8e+06          1        8e+06
!  02        2  2.42266e+10        8e+06          1        8e+06
!  03        3  2.42656e+10        8e+06          1        8e+06
!  04        4  2.43436e+10        8e+06          1        8e+06
!  05        5  2.44866e+10        8e+06          1        8e+06
!  06        6  2.45906e+10        8e+06          1        8e+06
!  07        7  2.46556e+10        8e+06          1        8e+06
!  08        8  2.46816e+10        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2240 lines of history.
! 
! Reading 520368 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
![@muppet J0646+4451_K_2006_10_20_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 3
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=3
float phase_soltime2
phase_soltime2=0.3
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.70
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 10
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.0650x0.0650 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 10 second bins.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.88353 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.2438 mas, bmaj=0.7085 mas, bpa=3.968 degrees
! Estimated noise=2.38904 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.33767 Jy
! Component: 100  -  total flux cleaned = 1.90884 Jy
! Total flux subtracted in 100 components = 1.90884 Jy
! Clean residual min=-0.123206 max=0.366944 Jy/beam
! Clean residual mean=0.000244 rms=0.041768 Jy/beam
! Combined flux in latest and established models = 1.90884 Jy
! Performing phase self-cal over 3 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.90884 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.839580Jy  sigma=4.550783
! Fit after  self-cal, rms=0.815166Jy  sigma=4.459615
! Inverting map and beam 
! Estimated beam: bmin=0.2438 mas, bmaj=0.7085 mas, bpa=3.968 degrees
! Estimated noise=2.38904 mJy/beam.
! Added new window around map position (0.39, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.402575 Jy
! Component: 100  -  total flux cleaned = 0.578813 Jy
! Total flux subtracted in 100 components = 0.578813 Jy
! Clean residual min=-0.074498 max=0.143712 Jy/beam
! Clean residual mean=0.000058 rms=0.021367 Jy/beam
! Combined flux in latest and established models = 2.48766 Jy
! Performing phase self-cal over 3 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 2.48766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.635221Jy  sigma=3.236029
! Fit after  self-cal, rms=0.619624Jy  sigma=3.119196
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.2893 mas, bmaj=0.7194 mas, bpa=0.6551 degrees
! Estimated noise=1.33376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.39, -0.195).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.176365 Jy
! Component: 100  -  total flux cleaned = 0.277125 Jy
! Component: 150  -  total flux cleaned = 0.335186 Jy
! Component: 200  -  total flux cleaned = 0.377255 Jy
! Total flux subtracted in 200 components = 0.377255 Jy
! Clean residual min=-0.041221 max=0.047154 Jy/beam
! Clean residual mean=-0.000103 rms=0.012005 Jy/beam
! Combined flux in latest and established models = 2.86491 Jy
! Performing phase self-cal over 3 minute time intervals
! Adding 45 model components to the UV plane model.
! The established model now contains 61 components and 2.86491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.566573Jy  sigma=2.789386
! Fit after  self-cal, rms=0.566201Jy  sigma=2.787042
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.2893 x 0.7194 at 0.6551 degrees (North through East)
! Clean map  min=-0.040472  max=1.3649 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        0.91     HN        1.04     KP        0.97     
!   LA        0.98     MK        0.84     NL        1.13     OV        0.91     
!   PT        0.92     SC        1.42     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.94     HN        1.13     KP        0.97     
!   LA        0.99     MK        0.80     NL        1.17     OV        0.91     
!   PT        0.82     SC        1.33     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.01     HN        1.06     KP        0.96     
!   LA        0.99     MK        0.88     NL        1.08     OV        0.88     
!   PT        0.94     SC        1.21     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.05     HN        1.05     KP        1.01     
!   LA        0.97     MK        0.94     NL        0.96     OV        0.74     
!   PT        1.10     SC        1.28     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.97     HN        0.94     KP        1.06     
!   LA        1.03     MK        1.06     NL        1.04     OV        0.73     
!   PT        0.87     SC        1.14     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.17     HN        0.75     KP        0.80     
!   LA        1.05     MK        1.11     NL        1.06     OV        0.91     
!   PT        0.95     SC        1.12     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.17     HN        0.87     KP        0.79     
!   LA        1.03     MK        1.13     NL        1.08     OV        1.15     
!   PT        1.02     SC        1.09     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.18     HN        0.87     KP        0.85     
!   LA        1.02     MK        1.21     NL        1.07     OV        1.13     
!   PT        1.05     SC        1.07     
! 
! 
! Fit before self-cal, rms=0.566201Jy  sigma=2.787042
! Fit after  self-cal, rms=0.498355Jy  sigma=2.198289
selfcal false, false, phase_soltime
! Performing phase self-cal over 3 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.498355Jy  sigma=2.198289
! Fit after  self-cal, rms=0.498472Jy  sigma=2.198713
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.2984 mas, bmaj=0.741 mas, bpa=-1.391 degrees
! Estimated noise=1.32914 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000184932 Jy
! Component: 100  -  total flux cleaned = -0.000215398 Jy
! Component: 150  -  total flux cleaned = -0.0022186 Jy
! Component: 200  -  total flux cleaned = -0.00223778 Jy
! Total flux subtracted in 200 components = -0.00223778 Jy
! Clean residual min=-0.017663 max=0.016390 Jy/beam
! Clean residual mean=0.000011 rms=0.004551 Jy/beam
! Combined flux in latest and established models = 2.86268 Jy
! Performing phase self-cal over 3 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 85 components and 2.86268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.497331Jy  sigma=2.190840
! Fit after  self-cal, rms=0.497458Jy  sigma=2.191708
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.3 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.497458Jy  sigma=2.191708
! Fit after  self-cal, rms=0.406498Jy  sigma=1.566257
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0208601 Jy
! Component: 100  -  total flux cleaned = 0.0233409 Jy
! Component: 150  -  total flux cleaned = 0.0242988 Jy
! Component: 200  -  total flux cleaned = 0.0260808 Jy
! Total flux subtracted in 200 components = 0.0260808 Jy
! Clean residual min=-0.017578 max=0.015170 Jy/beam
! Clean residual mean=0.000041 rms=0.003659 Jy/beam
! Combined flux in latest and established models = 2.88876 Jy
! Performing phase self-cal over 0.3 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 96 components and 2.88876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.405309Jy  sigma=1.552954
! Fit after  self-cal, rms=0.390752Jy  sigma=1.474834
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.2984 x 0.741 at -1.391 degrees (North through East)
! Clean map  min=-0.017  max=1.4029 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 3 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.390752Jy  sigma=1.474834
! Fit after  self-cal, rms=0.401364Jy  sigma=1.434130
! Performing phase self-cal over 0.3 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.401364Jy  sigma=1.434130
! Fit after  self-cal, rms=0.396433Jy  sigma=1.416639
! Inverting map and beam 
! Estimated beam: bmin=0.2965 mas, bmaj=0.7241 mas, bpa=-0.3675 degrees
! Estimated noise=1.32443 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000626118 Jy
! Component: 100  -  total flux cleaned = 0.00135684 Jy
! Component: 150  -  total flux cleaned = 0.0010539 Jy
! Component: 200  -  total flux cleaned = 0.000505092 Jy
! Total flux subtracted in 200 components = 0.000505092 Jy
! Clean residual min=-0.011648 max=0.010104 Jy/beam
! Clean residual mean=-0.000004 rms=0.002359 Jy/beam
! Combined flux in latest and established models = 2.88926 Jy
! Performing phase self-cal over 0.3 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 106 components and 2.88926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.395894Jy  sigma=1.412306
! Fit after  self-cal, rms=0.394136Jy  sigma=1.405745
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.394136Jy  sigma=1.405745
! Fit after  self-cal, rms=0.387903Jy  sigma=1.386730
! Performing phase self-cal over 0.3 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.387903Jy  sigma=1.386730
! Fit after  self-cal, rms=0.388745Jy  sigma=1.384721
! Inverting map and beam 
! Estimated beam: bmin=0.2962 mas, bmaj=0.7237 mas, bpa=-0.1867 degrees
! Estimated noise=1.32404 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00166964 Jy
! Component: 100  -  total flux cleaned = -0.00139361 Jy
! Component: 150  -  total flux cleaned = -0.00115755 Jy
! Component: 200  -  total flux cleaned = -0.0013796 Jy
! Total flux subtracted in 200 components = -0.0013796 Jy
! Clean residual min=-0.010131 max=0.008957 Jy/beam
! Clean residual mean=-0.000002 rms=0.002117 Jy/beam
! Combined flux in latest and established models = 2.88788 Jy
! Performing phase self-cal over 0.3 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 111 components and 2.88788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.388430Jy  sigma=1.382182
! Fit after  self-cal, rms=0.386373Jy  sigma=1.376358
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 180 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7991 mas, bmaj=0.9298 mas, bpa=29.77 degrees
! Estimated noise=1.85795 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155787 Jy
! Component: 100  -  total flux cleaned = 0.00142152 Jy
! Component: 150  -  total flux cleaned = 0.00184028 Jy
! Component: 200  -  total flux cleaned = 0.0019842 Jy
! Total flux subtracted in 200 components = 0.0019842 Jy
! Clean residual min=-0.011652 max=0.008178 Jy/beam
! Clean residual mean=-0.000020 rms=0.002800 Jy/beam
! Combined flux in latest and established models = 2.88986 Jy
! Performing phase self-cal over 0.3 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 123 components and 2.88986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.386267Jy  sigma=1.376357
! Fit after  self-cal, rms=0.384642Jy  sigma=1.372290
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.247 mas, bmaj=0.7042 mas, bpa=3.76 degrees
! Estimated noise=2.38711 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.38469 Jy
! Component: 100  -  total flux cleaned = 2.01601 Jy
! Component: 150  -  total flux cleaned = 2.33776 Jy
! Component: 200  -  total flux cleaned = 2.51264 Jy
! Total flux subtracted in 200 components = 2.51264 Jy
! Clean residual min=-0.028378 max=0.063969 Jy/beam
! Clean residual mean=0.000083 rms=0.010390 Jy/beam
! Combined flux in latest and established models = 2.51264 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 2.51264 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.2962 mas, bmaj=0.7237 mas, bpa=-0.1867 degrees
! Estimated noise=1.32404 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.131806 Jy
! Component: 100  -  total flux cleaned = 0.203145 Jy
! Component: 150  -  total flux cleaned = 0.251344 Jy
! Component: 200  -  total flux cleaned = 0.286176 Jy
! Total flux subtracted in 200 components = 0.286176 Jy
! Clean residual min=-0.010777 max=0.018478 Jy/beam
! Clean residual mean=-0.000004 rms=0.003924 Jy/beam
! Combined flux in latest and established models = 2.79881 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 79 components and 2.79881 Jy
! Inverting map 
! Added new window around map position (0.78, 0.065).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0268927 Jy
! Component: 100  -  total flux cleaned = 0.0465912 Jy
! Component: 150  -  total flux cleaned = 0.0592064 Jy
! Component: 200  -  total flux cleaned = 0.06892 Jy
! Total flux subtracted in 200 components = 0.06892 Jy
! Clean residual min=-0.007834 max=0.008079 Jy/beam
! Clean residual mean=0.000000 rms=0.002122 Jy/beam
! Combined flux in latest and established models = 2.86773 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 105 components and 2.86773 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 180 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7991 mas, bmaj=0.9298 mas, bpa=29.77 degrees
! Estimated noise=1.85795 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108877 Jy
! Component: 100  -  total flux cleaned = 0.013415 Jy
! Component: 150  -  total flux cleaned = 0.0146081 Jy
! Component: 200  -  total flux cleaned = 0.0152964 Jy
! Total flux subtracted in 200 components = 0.0152964 Jy
! Clean residual min=-0.009104 max=0.007207 Jy/beam
! Clean residual mean=-0.000010 rms=0.002402 Jy/beam
! Combined flux in latest and established models = 2.88303 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 135 components and 2.88303 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.2962 mas, bmaj=0.7237 mas, bpa=-0.1867 degrees
! Estimated noise=1.32404 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128283 Jy
! Component: 100  -  total flux cleaned = 0.00227846 Jy
! Component: 150  -  total flux cleaned = 0.00345988 Jy
! Component: 200  -  total flux cleaned = 0.00418336 Jy
! Total flux subtracted in 200 components = 0.00418336 Jy
! Clean residual min=-0.006315 max=0.005754 Jy/beam
! Clean residual mean=0.000003 rms=0.001643 Jy/beam
! Combined flux in latest and established models = 2.88721 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.3 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 160 components and 2.88721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.383813Jy  sigma=1.365113
! Fit after  self-cal, rms=0.382574Jy  sigma=1.362196
wmodel J0646+4451_K_2006_10_20_yyk\_map.mod
! Writing 160 model components to file: J0646+4451_K_2006_10_20_yyk_map.mod
wobs J0646+4451_K_2006_10_20_yyk\_uvs.fits
! Writing UV FITS file: J0646+4451_K_2006_10_20_yyk_uvs.fits
wwins J0646+4451_K_2006_10_20_yyk\_map.win
! wwins: Wrote 4 windows to J0646+4451_K_2006_10_20_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00011958 Jy
! Component: 100  -  total flux cleaned = -0.000819295 Jy
! Component: 150  -  total flux cleaned = -0.00147666 Jy
! Component: 200  -  total flux cleaned = -0.00201321 Jy
! Component: 250  -  total flux cleaned = -0.00235679 Jy
! Component: 300  -  total flux cleaned = -0.00293332 Jy
! Component: 350  -  total flux cleaned = -0.00309339 Jy
! Component: 400  -  total flux cleaned = -0.00340548 Jy
! Component: 450  -  total flux cleaned = -0.00370845 Jy
! Component: 500  -  total flux cleaned = -0.0039288 Jy
! Component: 550  -  total flux cleaned = -0.00399903 Jy
! Component: 600  -  total flux cleaned = -0.00413834 Jy
! Component: 650  -  total flux cleaned = -0.00434367 Jy
! Component: 700  -  total flux cleaned = -0.0044781 Jy
! Component: 750  -  total flux cleaned = -0.00467467 Jy
! Component: 800  -  total flux cleaned = -0.00473912 Jy
! Component: 850  -  total flux cleaned = -0.00492808 Jy
! Component: 900  -  total flux cleaned = -0.00486697 Jy
! Component: 950  -  total flux cleaned = -0.00522908 Jy
! Component: 1000  -  total flux cleaned = -0.00522914 Jy
! Component: 1050  -  total flux cleaned = -0.0055771 Jy
! Component: 1100  -  total flux cleaned = -0.00569024 Jy
! Component: 1150  -  total flux cleaned = -0.00569163 Jy
! Component: 1200  -  total flux cleaned = -0.00596753 Jy
! Component: 1250  -  total flux cleaned = -0.00612962 Jy
! Component: 1300  -  total flux cleaned = -0.00623463 Jy
! Component: 1350  -  total flux cleaned = -0.00628737 Jy
! Component: 1400  -  total flux cleaned = -0.00649278 Jy
! Component: 1450  -  total flux cleaned = -0.00654315 Jy
! Component: 1500  -  total flux cleaned = -0.00679129 Jy
! Component: 1550  -  total flux cleaned = -0.00683995 Jy
! Component: 1600  -  total flux cleaned = -0.00693639 Jy
! Component: 1650  -  total flux cleaned = -0.00707922 Jy
! Component: 1700  -  total flux cleaned = -0.00712625 Jy
! Component: 1750  -  total flux cleaned = -0.00731206 Jy
! Component: 1800  -  total flux cleaned = -0.00735805 Jy
! Component: 1850  -  total flux cleaned = -0.0074947 Jy
! Component: 1900  -  total flux cleaned = -0.00762947 Jy
! Component: 1950  -  total flux cleaned = -0.00776238 Jy
! Component: 2000  -  total flux cleaned = -0.00789413 Jy
! Total flux subtracted in 2048 components = -0.00798092 Jy
! Clean residual min=-0.002638 max=0.002644 Jy/beam
! Clean residual mean=0.000006 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 2.87923 Jy
keep
! Adding 151 model components to the UV plane model.
! The established model now contains 311 components and 2.87923 Jy
![Exited script file: muppet]
wmap "J0646+4451_K_2006_10_20_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.2962 x 0.7237 at -0.1867 degrees (North through East)
! Clean map  min=-0.0067604  max=1.4156 Jy/beam
! Writing clean map to FITS file: J0646+4451_K_2006_10_20_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.41558 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000822414 
device "J0646+4451_K_2006_10_20_yyk\_map.eps/VPS"
! Attempting to open device: 'J0646+4451_K_2006_10_20_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.174292 0.174292 0.348585 0.697169 1.39434 2.78868 5.57735 11.1547 22.3094 44.6188 89.2377
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0024 
print "peak=",int(peak_flux*1000)/1000
! peak= 1.415 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.2962 x 0.7237 at -0.1867 degrees (North through East)
! Clean map  min=-0.0067604  max=1.4156 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J0646+4451_K_2006_10_20_yyk\_map.gif/gif"
! Attempting to open device: 'J0646+4451_K_2006_10_20_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J0646+4451_K_2006_10_20_yyk_uvs.log closed on Thu Jul  8 23:40:58 2010