! Started logfile: /scr/pima/rdv94_uvs/J2327+1524_S_uvs.log on Mon Sep 23 22:14:28 2013 obs /scr/pima/rdv94_uvs/J2327+1524_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv94_uvs/J2327+1524_S_uva.fits ! AN table 1: 149 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.869607 visibilities/baseline/integration-bin. ! Found source: J2327+1524 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23693e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26693e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35693e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37693e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 14512 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J2327+1524_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.019732Jy sigma=1.293172 ! Fit after self-cal, rms=0.830940Jy sigma=1.028918 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.634 mas, bmaj=9.917 mas, bpa=-12.88 degrees ! Estimated noise=12.4725 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.140095 Jy ! Component: 100 - total flux cleaned = 0.182075 Jy ! Total flux subtracted in 100 components = 0.182075 Jy ! Clean residual min=-0.011562 max=0.017731 Jy/beam ! Clean residual mean=-0.000077 rms=0.003477 Jy/beam ! Combined flux in latest and established models = 0.182075 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.182075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118497Jy sigma=0.140179 ! Fit after self-cal, rms=0.118438Jy sigma=0.139988 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.574 mas, bmaj=10.01 mas, bpa=-12.03 degrees ! Estimated noise=4.81887 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211463 Jy ! Component: 100 - total flux cleaned = 0.0302888 Jy ! Component: 150 - total flux cleaned = 0.034235 Jy ! Component: 200 - total flux cleaned = 0.0342423 Jy ! Total flux subtracted in 200 components = 0.0342423 Jy ! Clean residual min=-0.007168 max=0.008586 Jy/beam ! Clean residual mean=-0.000017 rms=0.001972 Jy/beam ! Combined flux in latest and established models = 0.216317 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 26 components and 0.216317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115865Jy sigma=0.134488 ! Fit after self-cal, rms=0.115880Jy sigma=0.134421 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 0.99 KP 1.00 ! LA 1.31 MK 0.75 NL 1.02 OV 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.12 HN 1.04 KP 1.00 ! LA 1.18 MK 1.06 NL 1.05 OV 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.07 HN 1.01 KP 0.86 ! LA 0.96 MK 1.05 NL 1.10 OV 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.04 HN 0.90 KP 0.81 ! LA 0.79 MK 1.14 NL 1.01 OV 0.92 ! ! ! Fit before self-cal, rms=0.115880Jy sigma=0.134421 ! Fit after self-cal, rms=0.108676Jy sigma=0.127077 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.551 mas, bmaj=9.956 mas, bpa=-12.16 degrees ! Estimated noise=4.77186 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0059695 Jy ! Component: 100 - total flux cleaned = 0.00580058 Jy ! Component: 150 - total flux cleaned = 0.0055519 Jy ! Component: 200 - total flux cleaned = 0.00520296 Jy ! Total flux subtracted in 200 components = 0.00520296 Jy ! Clean residual min=-0.002876 max=0.002799 Jy/beam ! Clean residual mean=-0.000007 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.22152 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 51 components and 0.22152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108354Jy sigma=0.126600 ! Fit after self-cal, rms=0.108452Jy sigma=0.126451 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108452Jy sigma=0.126451 ! Fit after self-cal, rms=0.108373Jy sigma=0.126287 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.509 mas, bmaj=9.974 mas, bpa=-11.96 degrees ! Estimated noise=4.76578 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002 Jy ! Component: 100 - total flux cleaned = 0.00263813 Jy ! Component: 150 - total flux cleaned = 0.00316529 Jy ! Component: 200 - total flux cleaned = 0.00350997 Jy ! Total flux subtracted in 200 components = 0.00350997 Jy ! Clean residual min=-0.002297 max=0.002599 Jy/beam ! Clean residual mean=-0.000003 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.22503 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 75 components and 0.22503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108312Jy sigma=0.126218 ! Fit after self-cal, rms=0.108311Jy sigma=0.126206 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00090294 Jy ! Component: 100 - total flux cleaned = 0.001349 Jy ! Component: 150 - total flux cleaned = 0.00162753 Jy ! Component: 200 - total flux cleaned = 0.00177098 Jy ! Total flux subtracted in 200 components = 0.00177098 Jy ! Clean residual min=-0.002253 max=0.002547 Jy/beam ! Clean residual mean=-0.000002 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.226801 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 98 components and 0.226801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108288Jy sigma=0.126181 ! Fit after self-cal, rms=0.108285Jy sigma=0.126178 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108285Jy sigma=0.126178 ! Fit after self-cal, rms=0.107938Jy sigma=0.126162 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.493 mas, bmaj=9.982 mas, bpa=-11.94 degrees ! Estimated noise=4.76074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111039 Jy ! Component: 100 - total flux cleaned = 0.0013288 Jy ! Component: 150 - total flux cleaned = 0.00160857 Jy ! Component: 200 - total flux cleaned = 0.00176104 Jy ! Total flux subtracted in 200 components = 0.00176104 Jy ! Clean residual min=-0.002107 max=0.002485 Jy/beam ! Clean residual mean=-0.000001 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.228562 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 107 components and 0.228562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107915Jy sigma=0.126138 ! Fit after self-cal, rms=0.107909Jy sigma=0.126135 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (61.5, -39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117271 Jy ! Component: 100 - total flux cleaned = 0.00172486 Jy ! Component: 150 - total flux cleaned = 0.00234309 Jy ! Component: 200 - total flux cleaned = 0.00281203 Jy ! Total flux subtracted in 200 components = 0.00281203 Jy ! Clean residual min=-0.001959 max=0.001759 Jy/beam ! Clean residual mean=-0.000000 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.231374 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 127 components and 0.231374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107861Jy sigma=0.126059 ! Fit after self-cal, rms=0.107850Jy sigma=0.126051 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107850Jy sigma=0.126051 ! Fit after self-cal, rms=0.107618Jy sigma=0.126044 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.391 mas, bmaj=10.53 mas, bpa=-19.56 degrees ! Estimated noise=4.84244 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000533929 Jy ! Component: 100 - total flux cleaned = 0.000986169 Jy ! Component: 150 - total flux cleaned = 0.00129378 Jy ! Component: 200 - total flux cleaned = 0.00153812 Jy ! Total flux subtracted in 200 components = 0.00153812 Jy ! Clean residual min=-0.001794 max=0.001549 Jy/beam ! Clean residual mean=0.000000 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.232912 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 152 components and 0.232912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107610Jy sigma=0.126021 ! Fit after self-cal, rms=0.107605Jy sigma=0.126018 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00029561 Jy ! Component: 100 - total flux cleaned = 0.000552714 Jy ! Component: 150 - total flux cleaned = 0.00072334 Jy ! Component: 200 - total flux cleaned = 0.000876549 Jy ! Total flux subtracted in 200 components = 0.000876549 Jy ! Clean residual min=-0.001675 max=0.001455 Jy/beam ! Clean residual mean=0.000002 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.233789 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 176 components and 0.233789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107602Jy sigma=0.126009 ! Fit after self-cal, rms=0.107600Jy sigma=0.126007 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.489 mas, bmaj=9.988 mas, bpa=-11.96 degrees ! Estimated noise=4.75621 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.489 x 9.988 at -11.96 degrees (North through East) ! Clean map min=-0.0019083 max=0.17775 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.567 mas, bmaj=9.903 mas, bpa=-13.03 degrees ! Estimated noise=12.2167 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137928 Jy ! Component: 100 - total flux cleaned = 0.181909 Jy ! Component: 150 - total flux cleaned = 0.20143 Jy ! Component: 200 - total flux cleaned = 0.211342 Jy ! Total flux subtracted in 200 components = 0.211342 Jy ! Clean residual min=-0.007237 max=0.007153 Jy/beam ! Clean residual mean=-0.000024 rms=0.001913 Jy/beam ! Combined flux in latest and established models = 0.211342 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.211342 Jy ! Inverting map and beam ! Estimated beam: bmin=5.489 mas, bmaj=9.988 mas, bpa=-11.96 degrees ! Estimated noise=4.75621 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00790664 Jy ! Component: 100 - total flux cleaned = 0.0118863 Jy ! Component: 150 - total flux cleaned = 0.0139025 Jy ! Component: 200 - total flux cleaned = 0.0152882 Jy ! Total flux subtracted in 200 components = 0.0152882 Jy ! Clean residual min=-0.002339 max=0.001876 Jy/beam ! Clean residual mean=-0.000006 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.22663 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 57 components and 0.22663 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.391 mas, bmaj=10.53 mas, bpa=-19.56 degrees ! Estimated noise=4.84244 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189321 Jy ! Component: 100 - total flux cleaned = 0.00285929 Jy ! Component: 150 - total flux cleaned = 0.00360642 Jy ! Component: 200 - total flux cleaned = 0.00444415 Jy ! Total flux subtracted in 200 components = 0.00444415 Jy ! Clean residual min=-0.002204 max=0.001692 Jy/beam ! Clean residual mean=-0.000004 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.231074 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000671738 Jy ! Component: 100 - total flux cleaned = 0.00120541 Jy ! Component: 150 - total flux cleaned = 0.00165585 Jy ! Component: 200 - total flux cleaned = 0.00203612 Jy ! Total flux subtracted in 200 components = 0.00203612 Jy ! Clean residual min=-0.001908 max=0.001604 Jy/beam ! Clean residual mean=-0.000001 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.23311 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 103 components and 0.23311 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.489 mas, bmaj=9.988 mas, bpa=-11.96 degrees ! Estimated noise=4.75621 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000278681 Jy ! Component: 100 - total flux cleaned = -0.000343624 Jy ! Component: 150 - total flux cleaned = -0.000252664 Jy ! Component: 200 - total flux cleaned = -0.000140962 Jy ! Total flux subtracted in 200 components = -0.000140962 Jy ! Clean residual min=-0.001719 max=0.001684 Jy/beam ! Clean residual mean=-0.000000 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.23297 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 125 components and 0.23297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107608Jy sigma=0.126030 ! Fit after self-cal, rms=0.107614Jy sigma=0.126023 wmodel /scr/pima/rdv94_uvs/J2327+1524_S_map.mod ! Writing 125 model components to file: /scr/pima/rdv94_uvs/J2327+1524_S_map.mod wobs /scr/pima/rdv94_uvs/J2327+1524_S_uvs.fits ! Writing UV FITS file: /scr/pima/rdv94_uvs/J2327+1524_S_uvs.fits wwins /scr/pima/rdv94_uvs/J2327+1524_S_map.win ! wwins: Wrote 3 windows to /scr/pima/rdv94_uvs/J2327+1524_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160398 Jy ! Component: 100 - total flux cleaned = -0.000451726 Jy ! Component: 150 - total flux cleaned = -0.000753697 Jy ! Component: 200 - total flux cleaned = -0.000858975 Jy ! Component: 250 - total flux cleaned = -0.000859169 Jy ! Component: 300 - total flux cleaned = -0.000883563 Jy ! Component: 350 - total flux cleaned = -0.0010475 Jy ! Component: 400 - total flux cleaned = -0.00118232 Jy ! Component: 450 - total flux cleaned = -0.00133522 Jy ! Component: 500 - total flux cleaned = -0.0014202 Jy ! Component: 550 - total flux cleaned = -0.00152441 Jy ! Component: 600 - total flux cleaned = -0.00164631 Jy ! Component: 650 - total flux cleaned = -0.00170588 Jy ! Component: 700 - total flux cleaned = -0.00176421 Jy ! Component: 750 - total flux cleaned = -0.00184032 Jy ! Component: 800 - total flux cleaned = -0.00191498 Jy ! Component: 850 - total flux cleaned = -0.00200637 Jy ! Component: 900 - total flux cleaned = -0.00204221 Jy ! Component: 950 - total flux cleaned = -0.00211263 Jy ! Component: 1000 - total flux cleaned = -0.00218199 Jy ! Component: 1050 - total flux cleaned = -0.00221588 Jy ! Component: 1100 - total flux cleaned = -0.00226612 Jy ! Component: 1150 - total flux cleaned = -0.00226612 Jy ! Component: 1200 - total flux cleaned = -0.00233101 Jy ! Component: 1250 - total flux cleaned = -0.00234696 Jy ! Component: 1300 - total flux cleaned = -0.00231561 Jy ! Component: 1350 - total flux cleaned = -0.00236244 Jy ! Component: 1400 - total flux cleaned = -0.0023931 Jy ! Component: 1450 - total flux cleaned = -0.00240848 Jy ! Component: 1500 - total flux cleaned = -0.00243838 Jy ! Component: 1550 - total flux cleaned = -0.00243844 Jy ! Component: 1600 - total flux cleaned = -0.00243856 Jy ! Component: 1650 - total flux cleaned = -0.00249664 Jy ! Component: 1700 - total flux cleaned = -0.00248236 Jy ! Component: 1750 - total flux cleaned = -0.00255315 Jy ! Component: 1800 - total flux cleaned = -0.00256706 Jy ! Component: 1850 - total flux cleaned = -0.0026088 Jy ! Component: 1900 - total flux cleaned = -0.00266388 Jy ! Component: 1950 - total flux cleaned = -0.00269123 Jy ! Component: 2000 - total flux cleaned = -0.00274514 Jy ! Component: 2050 - total flux cleaned = -0.00275842 Jy ! Component: 2100 - total flux cleaned = -0.00282484 Jy ! Component: 2150 - total flux cleaned = -0.00285112 Jy ! Component: 2200 - total flux cleaned = -0.0028902 Jy ! Component: 2250 - total flux cleaned = -0.00287735 Jy ! Component: 2300 - total flux cleaned = -0.00295423 Jy ! Component: 2350 - total flux cleaned = -0.00296693 Jy ! Component: 2400 - total flux cleaned = -0.0030048 Jy ! Component: 2450 - total flux cleaned = -0.00302981 Jy ! Component: 2500 - total flux cleaned = -0.00306703 Jy ! Component: 2550 - total flux cleaned = -0.00310398 Jy ! Component: 2600 - total flux cleaned = -0.00310394 Jy ! Component: 2650 - total flux cleaned = -0.00317717 Jy ! Component: 2700 - total flux cleaned = -0.00323759 Jy ! Component: 2750 - total flux cleaned = -0.0032616 Jy ! Component: 2800 - total flux cleaned = -0.00327346 Jy ! Component: 2850 - total flux cleaned = -0.00330898 Jy ! Component: 2900 - total flux cleaned = -0.00332077 Jy ! Component: 2950 - total flux cleaned = -0.0033677 Jy ! Component: 3000 - total flux cleaned = -0.00337934 Jy ! Component: 3050 - total flux cleaned = -0.00341411 Jy ! Component: 3100 - total flux cleaned = -0.00337958 Jy ! Component: 3150 - total flux cleaned = -0.00343682 Jy ! Component: 3200 - total flux cleaned = -0.00343672 Jy ! Component: 3250 - total flux cleaned = -0.00341408 Jy ! Component: 3300 - total flux cleaned = -0.00342542 Jy ! Component: 3350 - total flux cleaned = -0.00342541 Jy ! Component: 3400 - total flux cleaned = -0.00340302 Jy ! Component: 3450 - total flux cleaned = -0.00342515 Jy ! Component: 3500 - total flux cleaned = -0.00336979 Jy ! Component: 3550 - total flux cleaned = -0.00336975 Jy ! Component: 3600 - total flux cleaned = -0.00330403 Jy ! Component: 3650 - total flux cleaned = -0.00332586 Jy ! Component: 3700 - total flux cleaned = -0.00330417 Jy ! Component: 3750 - total flux cleaned = -0.00333656 Jy ! Component: 3800 - total flux cleaned = -0.00330419 Jy ! Component: 3850 - total flux cleaned = -0.00329344 Jy ! Component: 3900 - total flux cleaned = -0.00329341 Jy ! Component: 3950 - total flux cleaned = -0.00328266 Jy ! Component: 4000 - total flux cleaned = -0.00325093 Jy ! Component: 4050 - total flux cleaned = -0.0032615 Jy ! Total flux subtracted in 4096 components = -0.00320898 Jy ! Clean residual min=-0.000614 max=0.000563 Jy/beam ! Clean residual mean=-0.000000 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.229761 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 430 components and 0.229761 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv94_uvs/J2327+1524_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.489 x 9.988 at -11.96 degrees (North through East) ! Clean map min=-0.001722 max=0.17698 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J2327+1524_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.176981 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000196652 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.333346 0.333346 0.666691 1.33338 2.66676 5.33353 10.6671 21.3341 42.6682 85.3365 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.176 quit ! Quitting program ! Log file /scr/pima/rdv94_uvs/J2327+1524_S_uvs.log closed on Mon Sep 23 22:14:33 2013