! Started logfile: /scr/pima/rdv94_uvs/J1827-0405_X_uvs.log on Mon Sep 23 22:13:07 2013 obs /scr/pima/rdv94_uvs/J1827-0405_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv94_uvs/J1827-0405_X_uva.fits ! AN table 1: 178 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.816212 visibilities/baseline/integration-bin. ! Found source: J1827-0405 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47993e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79493e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89993e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 16272 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J1827-0405_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011565Jy sigma=0.635493 ! Fit after self-cal, rms=0.924763Jy sigma=0.539869 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.918 mas, bmaj=3.585 mas, bpa=-21.04 degrees ! Estimated noise=22.0389 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0792559 Jy ! Component: 100 - total flux cleaned = 0.109603 Jy ! Total flux subtracted in 100 components = 0.109603 Jy ! Clean residual min=-0.023523 max=0.023417 Jy/beam ! Clean residual mean=0.000210 rms=0.007532 Jy/beam ! Combined flux in latest and established models = 0.109603 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.109603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125650Jy sigma=0.073345 ! Fit after self-cal, rms=0.123812Jy sigma=0.072205 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.167 mas, bmaj=3.586 mas, bpa=-20.29 degrees ! Estimated noise=10.3128 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019849 Jy ! Component: 100 - total flux cleaned = 0.0308093 Jy ! Component: 150 - total flux cleaned = 0.0377636 Jy ! Component: 200 - total flux cleaned = 0.0425684 Jy ! Total flux subtracted in 200 components = 0.0425684 Jy ! Clean residual min=-0.019698 max=0.020214 Jy/beam ! Clean residual mean=0.000128 rms=0.005726 Jy/beam ! Combined flux in latest and established models = 0.152171 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.152171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123793Jy sigma=0.066161 ! Fit after self-cal, rms=0.123766Jy sigma=0.066033 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.92 HN 0.93 KP 0.81 ! LA 0.87 MK 0.89 NL 1.11 OV 1.22 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.93 HN 0.95 KP 0.79 ! LA 0.83 MK 0.93 NL 1.18 OV 1.25 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.92 HN 0.87 KP 0.76 ! LA 0.88 MK 0.84 NL 1.23 OV 1.29 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.01 HN 0.86 KP 0.82 ! LA 0.85 MK 0.93 NL 1.25 OV 1.21 ! ! ! Fit before self-cal, rms=0.123766Jy sigma=0.066033 ! Fit after self-cal, rms=0.117769Jy sigma=0.061874 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.178 mas, bmaj=3.619 mas, bpa=-20.66 degrees ! Estimated noise=9.47105 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00923605 Jy ! Component: 100 - total flux cleaned = -0.0148455 Jy ! Component: 150 - total flux cleaned = -0.0187485 Jy ! Component: 200 - total flux cleaned = -0.0213784 Jy ! Total flux subtracted in 200 components = -0.0213784 Jy ! Clean residual min=-0.012478 max=0.015086 Jy/beam ! Clean residual mean=0.000079 rms=0.003672 Jy/beam ! Combined flux in latest and established models = 0.130793 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.130793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116086Jy sigma=0.062331 ! Fit after self-cal, rms=0.116351Jy sigma=0.062187 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116351Jy sigma=0.062187 ! Fit after self-cal, rms=0.129620Jy sigma=0.059467 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.133 mas, bmaj=3.663 mas, bpa=-20.15 degrees ! Estimated noise=8.89955 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00573817 Jy ! Component: 100 - total flux cleaned = -0.00940704 Jy ! Component: 150 - total flux cleaned = -0.0104532 Jy ! Component: 200 - total flux cleaned = -0.0109619 Jy ! Total flux subtracted in 200 components = -0.0109619 Jy ! Clean residual min=-0.009663 max=0.009656 Jy/beam ! Clean residual mean=0.000031 rms=0.002268 Jy/beam ! Combined flux in latest and established models = 0.119831 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.119831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128986Jy sigma=0.059504 ! Fit after self-cal, rms=0.130099Jy sigma=0.059348 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.6, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00951397 Jy ! Component: 100 - total flux cleaned = 0.0120856 Jy ! Component: 150 - total flux cleaned = 0.0135655 Jy ! Component: 200 - total flux cleaned = 0.0144678 Jy ! Total flux subtracted in 200 components = 0.0144678 Jy ! Clean residual min=-0.007128 max=0.007930 Jy/beam ! Clean residual mean=0.000013 rms=0.001838 Jy/beam ! Combined flux in latest and established models = 0.134299 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 87 components and 0.134299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128793Jy sigma=0.058499 ! Fit after self-cal, rms=0.129008Jy sigma=0.058295 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129008Jy sigma=0.058295 ! Fit after self-cal, rms=0.124765Jy sigma=0.058119 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.13 mas, bmaj=3.678 mas, bpa=-20.01 degrees ! Estimated noise=8.55337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199627 Jy ! Component: 100 - total flux cleaned = 0.00355311 Jy ! Component: 150 - total flux cleaned = 0.00421032 Jy ! Component: 200 - total flux cleaned = 0.00464105 Jy ! Total flux subtracted in 200 components = 0.00464105 Jy ! Clean residual min=-0.005838 max=0.006510 Jy/beam ! Clean residual mean=0.000010 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 0.13894 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 102 components and 0.13894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124033Jy sigma=0.057794 ! Fit after self-cal, rms=0.124385Jy sigma=0.057713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265575 Jy ! Component: 100 - total flux cleaned = 0.00351492 Jy ! Component: 150 - total flux cleaned = 0.00389804 Jy ! Component: 200 - total flux cleaned = 0.00424532 Jy ! Total flux subtracted in 200 components = 0.00424532 Jy ! Clean residual min=-0.005609 max=0.005622 Jy/beam ! Clean residual mean=0.000008 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 0.143185 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 111 components and 0.143185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123947Jy sigma=0.057549 ! Fit after self-cal, rms=0.124034Jy sigma=0.057514 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124034Jy sigma=0.057514 ! Fit after self-cal, rms=0.121426Jy sigma=0.057422 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.545 mas, bmaj=4.006 mas, bpa=-15.39 degrees ! Estimated noise=8.71476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154122 Jy ! Component: 100 - total flux cleaned = 0.00274947 Jy ! Component: 150 - total flux cleaned = 0.00322976 Jy ! Component: 200 - total flux cleaned = 0.00343129 Jy ! Total flux subtracted in 200 components = 0.00343129 Jy ! Clean residual min=-0.006287 max=0.005764 Jy/beam ! Clean residual mean=0.000011 rms=0.001588 Jy/beam ! Combined flux in latest and established models = 0.146617 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 130 components and 0.146616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121018Jy sigma=0.057342 ! Fit after self-cal, rms=0.121236Jy sigma=0.057288 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236224 Jy ! Component: 100 - total flux cleaned = 0.0031193 Jy ! Component: 150 - total flux cleaned = 0.0036779 Jy ! Component: 200 - total flux cleaned = 0.00392972 Jy ! Total flux subtracted in 200 components = 0.00392972 Jy ! Clean residual min=-0.005862 max=0.005244 Jy/beam ! Clean residual mean=0.000008 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.150546 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 148 components and 0.150546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120984Jy sigma=0.057257 ! Fit after self-cal, rms=0.121047Jy sigma=0.057222 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.13 mas, bmaj=3.691 mas, bpa=-20.01 degrees ! Estimated noise=8.3464 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.13 x 3.691 at -20.01 degrees (North through East) ! Clean map min=-0.011494 max=0.075559 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9136 mas, bmaj=3.72 mas, bpa=-20.94 degrees ! Estimated noise=17.3099 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0624174 Jy ! Component: 100 - total flux cleaned = 0.0884749 Jy ! Component: 150 - total flux cleaned = 0.104658 Jy ! Component: 200 - total flux cleaned = 0.11525 Jy ! Total flux subtracted in 200 components = 0.11525 Jy ! Clean residual min=-0.009642 max=0.010176 Jy/beam ! Clean residual mean=0.000067 rms=0.002615 Jy/beam ! Combined flux in latest and established models = 0.11525 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.11525 Jy ! Inverting map and beam ! Estimated beam: bmin=1.13 mas, bmaj=3.691 mas, bpa=-20.01 degrees ! Estimated noise=8.3464 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00798595 Jy ! Component: 100 - total flux cleaned = 0.0132475 Jy ! Component: 150 - total flux cleaned = 0.0149696 Jy ! Component: 200 - total flux cleaned = 0.0168325 Jy ! Total flux subtracted in 200 components = 0.0168325 Jy ! Clean residual min=-0.007145 max=0.008631 Jy/beam ! Clean residual mean=0.000035 rms=0.002053 Jy/beam ! Combined flux in latest and established models = 0.132082 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 83 components and 0.132082 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.545 mas, bmaj=4.006 mas, bpa=-15.39 degrees ! Estimated noise=8.71476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00578087 Jy ! Component: 100 - total flux cleaned = 0.00800648 Jy ! Component: 150 - total flux cleaned = 0.00986759 Jy ! Component: 200 - total flux cleaned = 0.0112552 Jy ! Total flux subtracted in 200 components = 0.0112552 Jy ! Clean residual min=-0.006307 max=0.007607 Jy/beam ! Clean residual mean=0.000027 rms=0.001967 Jy/beam ! Combined flux in latest and established models = 0.143337 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143672 Jy ! Component: 100 - total flux cleaned = 0.00271865 Jy ! Component: 150 - total flux cleaned = 0.0040121 Jy ! Component: 200 - total flux cleaned = 0.00514759 Jy ! Total flux subtracted in 200 components = 0.00514759 Jy ! Clean residual min=-0.005868 max=0.006374 Jy/beam ! Clean residual mean=0.000014 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 0.148485 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 113 components and 0.148485 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.13 mas, bmaj=3.691 mas, bpa=-20.01 degrees ! Estimated noise=8.3464 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146224 Jy ! Component: 100 - total flux cleaned = 0.00218534 Jy ! Component: 150 - total flux cleaned = 0.00243782 Jy ! Component: 200 - total flux cleaned = 0.0026539 Jy ! Total flux subtracted in 200 components = 0.0026539 Jy ! Clean residual min=-0.005371 max=0.005763 Jy/beam ! Clean residual mean=0.000007 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 0.151139 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 135 components and 0.151139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121019Jy sigma=0.057309 ! Fit after self-cal, rms=0.121124Jy sigma=0.057201 wmodel /scr/pima/rdv94_uvs/J1827-0405_X_map.mod ! Writing 135 model components to file: /scr/pima/rdv94_uvs/J1827-0405_X_map.mod wobs /scr/pima/rdv94_uvs/J1827-0405_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv94_uvs/J1827-0405_X_uvs.fits wwins /scr/pima/rdv94_uvs/J1827-0405_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rdv94_uvs/J1827-0405_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001914 Jy ! Component: 100 - total flux cleaned = 0.00112208 Jy ! Component: 150 - total flux cleaned = 0.0017037 Jy ! Component: 200 - total flux cleaned = 0.00205073 Jy ! Component: 250 - total flux cleaned = 0.0024497 Jy ! Component: 300 - total flux cleaned = 0.00264338 Jy ! Component: 350 - total flux cleaned = 0.00276834 Jy ! Component: 400 - total flux cleaned = 0.00307035 Jy ! Component: 450 - total flux cleaned = 0.00312989 Jy ! Component: 500 - total flux cleaned = 0.0033574 Jy ! Component: 550 - total flux cleaned = 0.00352236 Jy ! Component: 600 - total flux cleaned = 0.00368221 Jy ! Component: 650 - total flux cleaned = 0.00394258 Jy ! Component: 700 - total flux cleaned = 0.00414561 Jy ! Component: 750 - total flux cleaned = 0.0043457 Jy ! Component: 800 - total flux cleaned = 0.00468837 Jy ! Component: 850 - total flux cleaned = 0.00492725 Jy ! Component: 900 - total flux cleaned = 0.00516065 Jy ! Component: 950 - total flux cleaned = 0.00534511 Jy ! Component: 1000 - total flux cleaned = 0.00566027 Jy ! Component: 1050 - total flux cleaned = 0.00588097 Jy ! Component: 1100 - total flux cleaned = 0.00622582 Jy ! Component: 1150 - total flux cleaned = 0.0063526 Jy ! Component: 1200 - total flux cleaned = 0.00668561 Jy ! Component: 1250 - total flux cleaned = 0.00693019 Jy ! Component: 1300 - total flux cleaned = 0.00701044 Jy ! Component: 1350 - total flux cleaned = 0.00701087 Jy ! Component: 1400 - total flux cleaned = 0.00716672 Jy ! Component: 1450 - total flux cleaned = 0.0072437 Jy ! Component: 1500 - total flux cleaned = 0.00735627 Jy ! Component: 1550 - total flux cleaned = 0.00750364 Jy ! Component: 1600 - total flux cleaned = 0.00757638 Jy ! Component: 1650 - total flux cleaned = 0.00771902 Jy ! Component: 1700 - total flux cleaned = 0.00775456 Jy ! Component: 1750 - total flux cleaned = 0.00775521 Jy ! Component: 1800 - total flux cleaned = 0.0078918 Jy ! Component: 1850 - total flux cleaned = 0.00789124 Jy ! Component: 1900 - total flux cleaned = 0.0078907 Jy ! Component: 1950 - total flux cleaned = 0.00782544 Jy ! Component: 2000 - total flux cleaned = 0.0078901 Jy ! Component: 2050 - total flux cleaned = 0.00776284 Jy ! Component: 2100 - total flux cleaned = 0.00776273 Jy ! Component: 2150 - total flux cleaned = 0.00757685 Jy ! Component: 2200 - total flux cleaned = 0.00760734 Jy ! Component: 2250 - total flux cleaned = 0.00751577 Jy ! Component: 2300 - total flux cleaned = 0.00736635 Jy ! Component: 2350 - total flux cleaned = 0.00724808 Jy ! Component: 2400 - total flux cleaned = 0.00707298 Jy ! Component: 2450 - total flux cleaned = 0.00701566 Jy ! Component: 2500 - total flux cleaned = 0.00690159 Jy ! Component: 2550 - total flux cleaned = 0.00678852 Jy ! Component: 2600 - total flux cleaned = 0.00662161 Jy ! Component: 2650 - total flux cleaned = 0.00656634 Jy ! Component: 2700 - total flux cleaned = 0.00637522 Jy ! Component: 2750 - total flux cleaned = 0.00629469 Jy ! Component: 2800 - total flux cleaned = 0.00610774 Jy ! Component: 2850 - total flux cleaned = 0.00605517 Jy ! Component: 2900 - total flux cleaned = 0.00597688 Jy ! Component: 2950 - total flux cleaned = 0.00587345 Jy ! Component: 3000 - total flux cleaned = 0.00577081 Jy ! Component: 3050 - total flux cleaned = 0.00566959 Jy ! Component: 3100 - total flux cleaned = 0.00556924 Jy ! Component: 3150 - total flux cleaned = 0.00546998 Jy ! Component: 3200 - total flux cleaned = 0.00537147 Jy ! Component: 3250 - total flux cleaned = 0.00532254 Jy ! Component: 3300 - total flux cleaned = 0.00529801 Jy ! Component: 3350 - total flux cleaned = 0.00527401 Jy ! Component: 3400 - total flux cleaned = 0.00517905 Jy ! Component: 3450 - total flux cleaned = 0.00517896 Jy ! Component: 3500 - total flux cleaned = 0.00513249 Jy ! Component: 3550 - total flux cleaned = 0.00506318 Jy ! Component: 3600 - total flux cleaned = 0.00499444 Jy ! Component: 3650 - total flux cleaned = 0.00499426 Jy ! Component: 3700 - total flux cleaned = 0.00488128 Jy ! Component: 3750 - total flux cleaned = 0.00485871 Jy ! Component: 3800 - total flux cleaned = 0.00479178 Jy ! Component: 3850 - total flux cleaned = 0.00479182 Jy ! Component: 3900 - total flux cleaned = 0.00483587 Jy ! Component: 3950 - total flux cleaned = 0.00477016 Jy ! Component: 4000 - total flux cleaned = 0.00474845 Jy ! Component: 4050 - total flux cleaned = 0.00470523 Jy ! Total flux subtracted in 4096 components = 0.00470521 Jy ! Clean residual min=-0.001347 max=0.001303 Jy/beam ! Clean residual mean=0.000000 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.155844 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 413 components and 0.155844 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv94_uvs/J1827-0405_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.13 x 3.691 at -20.01 degrees (North through East) ! Clean map min=-0.010146 max=0.073723 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J1827-0405_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0737231 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000399925 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.62741 1.62741 3.25481 6.50963 13.0193 26.0385 52.077 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.073 quit ! Quitting program ! Log file /scr/pima/rdv94_uvs/J1827-0405_X_uvs.log closed on Mon Sep 23 22:13:13 2013