! Started logfile: /scr/pima/rdv94_uvs/J1827-0405_S_uvs.log on Mon Sep 23 22:13:30 2013 obs /scr/pima/rdv94_uvs/J1827-0405_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv94_uvs/J1827-0405_S_uva.fits ! AN table 1: 178 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.816613 visibilities/baseline/integration-bin. ! Found source: J1827-0405 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23693e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26693e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35693e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37693e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 16280 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J1827-0405_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.111900Jy sigma=2.666125 ! Fit after self-cal, rms=0.699266Jy sigma=1.286583 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.648 mas, bmaj=12.76 mas, bpa=-8.708 degrees ! Estimated noise=4.6987 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.320325 Jy ! Component: 100 - total flux cleaned = 0.432081 Jy ! Total flux subtracted in 100 components = 0.432081 Jy ! Clean residual min=-0.032941 max=0.048074 Jy/beam ! Clean residual mean=0.000053 rms=0.011834 Jy/beam ! Combined flux in latest and established models = 0.432081 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.432081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177997Jy sigma=0.466060 ! Fit after self-cal, rms=0.177971Jy sigma=0.465880 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.726 mas, bmaj=13.75 mas, bpa=-6.661 degrees ! Estimated noise=2.74324 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0652831 Jy ! Component: 100 - total flux cleaned = 0.102552 Jy ! Component: 150 - total flux cleaned = 0.127387 Jy ! Component: 200 - total flux cleaned = 0.144711 Jy ! Total flux subtracted in 200 components = 0.144711 Jy ! Clean residual min=-0.021724 max=0.030383 Jy/beam ! Clean residual mean=0.000103 rms=0.007259 Jy/beam ! Combined flux in latest and established models = 0.576792 Jy ! Performing phase self-cal ! Adding 98 model components to the UV plane model. ! The established model now contains 114 components and 0.576792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161568Jy sigma=0.393150 ! Fit after self-cal, rms=0.161859Jy sigma=0.392966 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 1.01 KP 1.02 ! LA 1.25 MK 0.78 NL 1.02 OV 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.02 HN 1.07 KP 1.01 ! LA 1.13 MK 1.11 NL 1.04 OV 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.07 HN 1.03 KP 0.89 ! LA 0.94 MK 0.91 NL 1.11 OV 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.00 HN 0.92 KP 0.86 ! LA 0.78 MK 0.96 NL 1.02 OV 0.84 ! ! ! Fit before self-cal, rms=0.161859Jy sigma=0.392966 ! Fit after self-cal, rms=0.132909Jy sigma=0.311906 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.727 mas, bmaj=13.74 mas, bpa=-6.982 degrees ! Estimated noise=2.70442 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024552 Jy ! Component: 100 - total flux cleaned = 0.00470695 Jy ! Component: 150 - total flux cleaned = 0.00729174 Jy ! Component: 200 - total flux cleaned = 0.0092963 Jy ! Total flux subtracted in 200 components = 0.0092963 Jy ! Clean residual min=-0.016761 max=0.022920 Jy/beam ! Clean residual mean=0.000015 rms=0.005748 Jy/beam ! Combined flux in latest and established models = 0.586088 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 126 components and 0.586088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131898Jy sigma=0.310360 ! Fit after self-cal, rms=0.132123Jy sigma=0.310184 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132123Jy sigma=0.310184 ! Fit after self-cal, rms=0.122292Jy sigma=0.272301 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.608 mas, bmaj=13.52 mas, bpa=-5.817 degrees ! Estimated noise=2.66836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371948 Jy ! Component: 100 - total flux cleaned = 0.00556163 Jy ! Component: 150 - total flux cleaned = 0.00610575 Jy ! Component: 200 - total flux cleaned = 0.00610163 Jy ! Total flux subtracted in 200 components = 0.00610163 Jy ! Clean residual min=-0.010281 max=0.022462 Jy/beam ! Clean residual mean=0.000067 rms=0.003768 Jy/beam ! Combined flux in latest and established models = 0.59219 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 145 components and 0.59219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120763Jy sigma=0.269655 ! Fit after self-cal, rms=0.120881Jy sigma=0.269495 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177599 Jy ! Component: 100 - total flux cleaned = 0.0216459 Jy ! Component: 150 - total flux cleaned = 0.0225249 Jy ! Component: 200 - total flux cleaned = 0.0230084 Jy ! Total flux subtracted in 200 components = 0.0230084 Jy ! Clean residual min=-0.007274 max=0.009891 Jy/beam ! Clean residual mean=0.000008 rms=0.002375 Jy/beam ! Combined flux in latest and established models = 0.615198 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 178 components and 0.615198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118310Jy sigma=0.261487 ! Fit after self-cal, rms=0.117992Jy sigma=0.260653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117992Jy sigma=0.260653 ! Fit after self-cal, rms=0.117084Jy sigma=0.259935 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.575 mas, bmaj=13.49 mas, bpa=-5.704 degrees ! Estimated noise=2.65691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00759595 Jy ! Component: 100 - total flux cleaned = 0.0106486 Jy ! Component: 150 - total flux cleaned = 0.0125076 Jy ! Component: 200 - total flux cleaned = 0.0136589 Jy ! Total flux subtracted in 200 components = 0.0136589 Jy ! Clean residual min=-0.005237 max=0.006666 Jy/beam ! Clean residual mean=-0.000002 rms=0.001631 Jy/beam ! Combined flux in latest and established models = 0.628857 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 196 components and 0.628857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116197Jy sigma=0.258131 ! Fit after self-cal, rms=0.116185Jy sigma=0.257965 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243913 Jy ! Component: 100 - total flux cleaned = 0.0027286 Jy ! Component: 150 - total flux cleaned = 0.0027278 Jy ! Component: 200 - total flux cleaned = 0.00223661 Jy ! Total flux subtracted in 200 components = 0.00223661 Jy ! Clean residual min=-0.004568 max=0.005795 Jy/beam ! Clean residual mean=-0.000010 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.631094 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 218 components and 0.631094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115804Jy sigma=0.257369 ! Fit after self-cal, rms=0.115808Jy sigma=0.257335 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115808Jy sigma=0.257335 ! Fit after self-cal, rms=0.115365Jy sigma=0.257100 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.797 mas, bmaj=14.57 mas, bpa=0.1152 degrees ! Estimated noise=2.36102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348601 Jy ! Component: 100 - total flux cleaned = 0.00422193 Jy ! Component: 150 - total flux cleaned = 0.00431307 Jy ! Component: 200 - total flux cleaned = 0.00398081 Jy ! Total flux subtracted in 200 components = 0.00398081 Jy ! Clean residual min=-0.003970 max=0.004445 Jy/beam ! Clean residual mean=-0.000006 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.635075 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 234 components and 0.635075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115193Jy sigma=0.256714 ! Fit after self-cal, rms=0.115206Jy sigma=0.256692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121134 Jy ! Component: 100 - total flux cleaned = 0.00012218 Jy ! Component: 150 - total flux cleaned = 5.0643e-05 Jy ! Component: 200 - total flux cleaned = -1.53602e-05 Jy ! Total flux subtracted in 200 components = -1.53602e-05 Jy ! Clean residual min=-0.003679 max=0.004263 Jy/beam ! Clean residual mean=-0.000009 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.635059 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 242 components and 0.635059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115093Jy sigma=0.256497 ! Fit after self-cal, rms=0.115103Jy sigma=0.256489 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=7.58 mas, bmaj=13.47 mas, bpa=-5.588 degrees ! Estimated noise=2.65121 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.58 x 13.47 at -5.588 degrees (North through East) ! Clean map min=-0.0044437 max=0.40387 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.49 mas, bmaj=12.43 mas, bpa=-7.274 degrees ! Estimated noise=4.5328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.310603 Jy ! Component: 100 - total flux cleaned = 0.423181 Jy ! Component: 150 - total flux cleaned = 0.478652 Jy ! Component: 200 - total flux cleaned = 0.515116 Jy ! Total flux subtracted in 200 components = 0.515116 Jy ! Clean residual min=-0.015107 max=0.021918 Jy/beam ! Clean residual mean=0.000028 rms=0.005596 Jy/beam ! Combined flux in latest and established models = 0.515116 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 0.515116 Jy ! Inverting map and beam ! Estimated beam: bmin=7.58 mas, bmaj=13.47 mas, bpa=-5.588 degrees ! Estimated noise=2.65121 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0318028 Jy ! Component: 100 - total flux cleaned = 0.0536958 Jy ! Component: 150 - total flux cleaned = 0.0696339 Jy ! Component: 200 - total flux cleaned = 0.0816404 Jy ! Total flux subtracted in 200 components = 0.0816404 Jy ! Clean residual min=-0.008168 max=0.009547 Jy/beam ! Clean residual mean=0.000053 rms=0.002662 Jy/beam ! Combined flux in latest and established models = 0.596756 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 133 components and 0.596756 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.797 mas, bmaj=14.57 mas, bpa=0.1152 degrees ! Estimated noise=2.36102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104302 Jy ! Component: 100 - total flux cleaned = 0.0164954 Jy ! Component: 150 - total flux cleaned = 0.0217022 Jy ! Component: 200 - total flux cleaned = 0.0249558 Jy ! Total flux subtracted in 200 components = 0.0249558 Jy ! Clean residual min=-0.005131 max=0.005482 Jy/beam ! Clean residual mean=0.000023 rms=0.001670 Jy/beam ! Combined flux in latest and established models = 0.621712 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027764 Jy ! Component: 100 - total flux cleaned = 0.00500682 Jy ! Component: 150 - total flux cleaned = 0.00665994 Jy ! Component: 200 - total flux cleaned = 0.00752413 Jy ! Total flux subtracted in 200 components = 0.00752413 Jy ! Clean residual min=-0.004609 max=0.004221 Jy/beam ! Clean residual mean=0.000003 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.629236 Jy ! Adding 126 model components to the UV plane model. ! The established model now contains 248 components and 0.629236 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=7.58 mas, bmaj=13.47 mas, bpa=-5.588 degrees ! Estimated noise=2.65121 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.01734e-05 Jy ! Component: 100 - total flux cleaned = 0.000445237 Jy ! Component: 150 - total flux cleaned = 0.000673133 Jy ! Component: 200 - total flux cleaned = 0.00119704 Jy ! Total flux subtracted in 200 components = 0.00119704 Jy ! Clean residual min=-0.004462 max=0.004079 Jy/beam ! Clean residual mean=-0.000000 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.630433 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 269 components and 0.630433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114900Jy sigma=0.256534 ! Fit after self-cal, rms=0.114710Jy sigma=0.256492 wmodel /scr/pima/rdv94_uvs/J1827-0405_S_map.mod ! Writing 269 model components to file: /scr/pima/rdv94_uvs/J1827-0405_S_map.mod wobs /scr/pima/rdv94_uvs/J1827-0405_S_uvs.fits ! Writing UV FITS file: /scr/pima/rdv94_uvs/J1827-0405_S_uvs.fits wwins /scr/pima/rdv94_uvs/J1827-0405_S_map.win ! wwins: Wrote 2 windows to /scr/pima/rdv94_uvs/J1827-0405_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011628 Jy ! Component: 100 - total flux cleaned = -0.00203651 Jy ! Component: 150 - total flux cleaned = -0.00277975 Jy ! Component: 200 - total flux cleaned = -0.00295376 Jy ! Component: 250 - total flux cleaned = -0.00311609 Jy ! Component: 300 - total flux cleaned = -0.00311683 Jy ! Component: 350 - total flux cleaned = -0.00297233 Jy ! Component: 400 - total flux cleaned = -0.00315779 Jy ! Component: 450 - total flux cleaned = -0.00329143 Jy ! Component: 500 - total flux cleaned = -0.00346413 Jy ! Component: 550 - total flux cleaned = -0.00367307 Jy ! Component: 600 - total flux cleaned = -0.00407669 Jy ! Component: 650 - total flux cleaned = -0.00423215 Jy ! Component: 700 - total flux cleaned = -0.00446089 Jy ! Component: 750 - total flux cleaned = -0.00471942 Jy ! Component: 800 - total flux cleaned = -0.00482792 Jy ! Component: 850 - total flux cleaned = -0.00503728 Jy ! Component: 900 - total flux cleaned = -0.00530704 Jy ! Component: 950 - total flux cleaned = -0.00543719 Jy ! Component: 1000 - total flux cleaned = -0.00556603 Jy ! Component: 1050 - total flux cleaned = -0.00594236 Jy ! Component: 1100 - total flux cleaned = -0.00618804 Jy ! Component: 1150 - total flux cleaned = -0.00651826 Jy ! Component: 1200 - total flux cleaned = -0.00681079 Jy ! Component: 1250 - total flux cleaned = -0.00709662 Jy ! Component: 1300 - total flux cleaned = -0.00720874 Jy ! Component: 1350 - total flux cleaned = -0.00745599 Jy ! Component: 1400 - total flux cleaned = -0.00769805 Jy ! Component: 1450 - total flux cleaned = -0.00782962 Jy ! Component: 1500 - total flux cleaned = -0.00798507 Jy ! Component: 1550 - total flux cleaned = -0.00818716 Jy ! Component: 1600 - total flux cleaned = -0.00826183 Jy ! Component: 1650 - total flux cleaned = -0.00843196 Jy ! Component: 1700 - total flux cleaned = -0.00850266 Jy ! Component: 1750 - total flux cleaned = -0.00859634 Jy ! Component: 1800 - total flux cleaned = -0.00871139 Jy ! Component: 1850 - total flux cleaned = -0.00882422 Jy ! Component: 1900 - total flux cleaned = -0.00895792 Jy ! Component: 1950 - total flux cleaned = -0.00906692 Jy ! Component: 2000 - total flux cleaned = -0.00921802 Jy ! Component: 2050 - total flux cleaned = -0.00930316 Jy ! Component: 2100 - total flux cleaned = -0.00947024 Jy ! Component: 2150 - total flux cleaned = -0.00957313 Jy ! Component: 2200 - total flux cleaned = -0.00965453 Jy ! Component: 2250 - total flux cleaned = -0.00975494 Jy ! Component: 2300 - total flux cleaned = -0.00987391 Jy ! Component: 2350 - total flux cleaned = -0.00995176 Jy ! Component: 2400 - total flux cleaned = -0.00999024 Jy ! Component: 2450 - total flux cleaned = -0.0100094 Jy ! Component: 2500 - total flux cleaned = -0.0101037 Jy ! Component: 2550 - total flux cleaned = -0.0101781 Jy ! Component: 2600 - total flux cleaned = -0.0102515 Jy ! Component: 2650 - total flux cleaned = -0.0103243 Jy ! Component: 2700 - total flux cleaned = -0.0104319 Jy ! Component: 2750 - total flux cleaned = -0.0105025 Jy ! Component: 2800 - total flux cleaned = -0.0105723 Jy ! Component: 2850 - total flux cleaned = -0.0106069 Jy ! Component: 2900 - total flux cleaned = -0.0107095 Jy ! Component: 2950 - total flux cleaned = -0.0107772 Jy ! Component: 3000 - total flux cleaned = -0.010844 Jy ! Component: 3050 - total flux cleaned = -0.0109102 Jy ! Component: 3100 - total flux cleaned = -0.0109427 Jy ! Component: 3150 - total flux cleaned = -0.0109914 Jy ! Component: 3200 - total flux cleaned = -0.0110555 Jy ! Component: 3250 - total flux cleaned = -0.0110712 Jy ! Component: 3300 - total flux cleaned = -0.0111338 Jy ! Component: 3350 - total flux cleaned = -0.0111803 Jy ! Component: 3400 - total flux cleaned = -0.0112112 Jy ! Component: 3450 - total flux cleaned = -0.0111654 Jy ! Component: 3500 - total flux cleaned = -0.0112414 Jy ! Component: 3550 - total flux cleaned = -0.0112563 Jy ! Component: 3600 - total flux cleaned = -0.0112712 Jy ! Component: 3650 - total flux cleaned = -0.0112564 Jy ! Component: 3700 - total flux cleaned = -0.0112563 Jy ! Component: 3750 - total flux cleaned = -0.0112417 Jy ! Component: 3800 - total flux cleaned = -0.0111981 Jy ! Component: 3850 - total flux cleaned = -0.0111693 Jy ! Component: 3900 - total flux cleaned = -0.0111264 Jy ! Component: 3950 - total flux cleaned = -0.0111264 Jy ! Component: 4000 - total flux cleaned = -0.0110839 Jy ! Component: 4050 - total flux cleaned = -0.0110415 Jy ! Total flux subtracted in 4096 components = -0.0109994 Jy ! Clean residual min=-0.000811 max=0.000746 Jy/beam ! Clean residual mean=-0.000002 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.619434 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 558 components and 0.619434 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv94_uvs/J1827-0405_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 7.58 x 13.47 at -5.588 degrees (North through East) ! Clean map min=-0.0024827 max=0.40622 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J1827-0405_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.406215 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000263477 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.194584 0.194584 0.389168 0.778336 1.55667 3.11334 6.22669 12.4534 24.9068 49.8135 99.627 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.406 quit ! Quitting program ! Log file /scr/pima/rdv94_uvs/J1827-0405_S_uvs.log closed on Mon Sep 23 22:13:36 2013