! Started logfile: /scr/pima/rdv94_uvs/J1755+0454_X_uvs.log on Mon Sep 23 22:12:55 2013 obs /scr/pima/rdv94_uvs/J1755+0454_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv94_uvs/J1755+0454_X_uva.fits ! AN table 1: 89 integrations on 10 of 10 possible baselines. ! AN table 2: 88 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.32469 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1755+0454 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47993e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79493e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89993e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3556 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J1755+0454_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 616 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 616 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 616 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 616 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.009113Jy sigma=0.285329 ! Fit after self-cal, rms=0.936488Jy sigma=0.269943 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.534 mas, bmaj=2.573 mas, bpa=81.48 degrees ! Estimated noise=79.9751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.053227 Jy ! Component: 100 - total flux cleaned = 0.0566701 Jy ! Total flux subtracted in 100 components = 0.0566701 Jy ! Clean residual min=-0.008108 max=0.008109 Jy/beam ! Clean residual mean=-0.000052 rms=0.003276 Jy/beam ! Combined flux in latest and established models = 0.0566701 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0566701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082935Jy sigma=0.023325 ! Fit after self-cal, rms=0.082234Jy sigma=0.023050 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=2.903 mas, bpa=-36.98 degrees ! Estimated noise=44.4214 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413628 Jy ! Component: 100 - total flux cleaned = 0.00664461 Jy ! Component: 150 - total flux cleaned = 0.00827052 Jy ! Component: 200 - total flux cleaned = 0.00830518 Jy ! Total flux subtracted in 200 components = 0.00830518 Jy ! Clean residual min=-0.001887 max=0.001871 Jy/beam ! Clean residual mean=-0.000012 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.0649753 Jy ! Performing phase self-cal ! Adding 87 model components to the UV plane model. ! The established model now contains 109 components and 0.0649753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080787Jy sigma=0.022405 ! Fit after self-cal, rms=0.080873Jy sigma=0.022351 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.95 KP 1.12 LA 0.98 ! NL 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 1.06 KP 0.97 LA 0.93 ! NL 1.09 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.90 KP 0.89 LA 1.09 ! NL 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.92 KP 0.99 LA 1.01 ! NL 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* ! ! ! Fit before self-cal, rms=0.080873Jy sigma=0.022351 ! Fit after self-cal, rms=0.078939Jy sigma=0.022248 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.722 mas, bmaj=2.912 mas, bpa=-40.92 degrees ! Estimated noise=43.5117 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130687 Jy ! Component: 100 - total flux cleaned = -0.00223999 Jy ! Component: 150 - total flux cleaned = -0.00238578 Jy ! Component: 200 - total flux cleaned = -0.00188564 Jy ! Total flux subtracted in 200 components = -0.00188564 Jy ! Clean residual min=-0.001005 max=0.001006 Jy/beam ! Clean residual mean=0.000003 rms=0.000359 Jy/beam ! Combined flux in latest and established models = 0.0630897 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 146 components and 0.0630897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078765Jy sigma=0.022208 ! Fit after self-cal, rms=0.078922Jy sigma=0.022180 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078922Jy sigma=0.022180 ! Fit after self-cal, rms=0.079859Jy sigma=0.022173 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.724 mas, bmaj=2.905 mas, bpa=-41.76 degrees ! Estimated noise=43.7828 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000662243 Jy ! Component: 100 - total flux cleaned = -0.00122241 Jy ! Component: 150 - total flux cleaned = -0.00165551 Jy ! Component: 200 - total flux cleaned = -0.0018471 Jy ! Total flux subtracted in 200 components = -0.0018471 Jy ! Clean residual min=-0.000781 max=0.000777 Jy/beam ! Clean residual mean=0.000002 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.0612426 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 178 components and 0.0612426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079767Jy sigma=0.022151 ! Fit after self-cal, rms=0.079774Jy sigma=0.022135 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00037467 Jy ! Component: 100 - total flux cleaned = -0.000676335 Jy ! Component: 150 - total flux cleaned = -0.00123492 Jy ! Component: 200 - total flux cleaned = -0.00179499 Jy ! Total flux subtracted in 200 components = -0.00179499 Jy ! Clean residual min=-0.000644 max=0.000640 Jy/beam ! Clean residual mean=0.000001 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.0594476 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 210 components and 0.0594476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079713Jy sigma=0.022121 ! Fit after self-cal, rms=0.079698Jy sigma=0.022118 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079698Jy sigma=0.022118 ! Fit after self-cal, rms=0.080301Jy sigma=0.022116 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=2.901 mas, bpa=-42.46 degrees ! Estimated noise=43.8995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000420632 Jy ! Component: 100 - total flux cleaned = -0.000553525 Jy ! Component: 150 - total flux cleaned = -0.000391972 Jy ! Component: 200 - total flux cleaned = -0.000273679 Jy ! Total flux subtracted in 200 components = -0.000273679 Jy ! Clean residual min=-0.000650 max=0.000655 Jy/beam ! Clean residual mean=0.000002 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.0591739 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 241 components and 0.0591739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080260Jy sigma=0.022105 ! Fit after self-cal, rms=0.080290Jy sigma=0.022103 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000381183 Jy ! Component: 100 - total flux cleaned = -0.000696442 Jy ! Component: 150 - total flux cleaned = -0.00102774 Jy ! Component: 200 - total flux cleaned = -0.00145553 Jy ! Total flux subtracted in 200 components = -0.00145553 Jy ! Clean residual min=-0.000588 max=0.000588 Jy/beam ! Clean residual mean=0.000000 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.0577184 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 268 components and 0.0577184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080256Jy sigma=0.022094 ! Fit after self-cal, rms=0.080248Jy sigma=0.022092 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080248Jy sigma=0.022092 ! Fit after self-cal, rms=0.080753Jy sigma=0.022091 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=3.261 mas, bpa=-77 degrees ! Estimated noise=42.8698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.25112e-05 Jy ! Component: 100 - total flux cleaned = -0.0002058 Jy ! Component: 150 - total flux cleaned = -0.000454396 Jy ! Component: 200 - total flux cleaned = -0.000738578 Jy ! Total flux subtracted in 200 components = -0.000738578 Jy ! Clean residual min=-0.000530 max=0.000528 Jy/beam ! Clean residual mean=0.000002 rms=0.000175 Jy/beam ! Combined flux in latest and established models = 0.0569798 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 298 components and 0.0569798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080727Jy sigma=0.022084 ! Fit after self-cal, rms=0.080741Jy sigma=0.022080 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.41073e-05 Jy ! Component: 100 - total flux cleaned = 4.33714e-05 Jy ! Component: 150 - total flux cleaned = -1.79221e-05 Jy ! Component: 200 - total flux cleaned = -0.000314064 Jy ! Total flux subtracted in 200 components = -0.000314064 Jy ! Clean residual min=-0.000495 max=0.000492 Jy/beam ! Clean residual mean=0.000001 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.0566658 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 322 components and 0.0566658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080713Jy sigma=0.022072 ! Fit after self-cal, rms=0.080706Jy sigma=0.022072 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.727 mas, bmaj=2.9 mas, bpa=-43.45 degrees ! Estimated noise=44.008 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.727 x 2.9 at -43.45 degrees (North through East) ! Clean map min=-0.0035028 max=0.054281 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.551 mas, bmaj=2.587 mas, bpa=78.32 degrees ! Estimated noise=79.1911 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0398682 Jy ! Component: 100 - total flux cleaned = 0.0397092 Jy ! Component: 150 - total flux cleaned = 0.040514 Jy ! Component: 200 - total flux cleaned = 0.0413294 Jy ! Total flux subtracted in 200 components = 0.0413294 Jy ! Clean residual min=-0.003771 max=0.003787 Jy/beam ! Clean residual mean=-0.000020 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 0.0413294 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.0413294 Jy ! Inverting map and beam ! Estimated beam: bmin=2.727 mas, bmaj=2.9 mas, bpa=-43.45 degrees ! Estimated noise=44.008 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240121 Jy ! Component: 100 - total flux cleaned = 0.000267486 Jy ! Component: 150 - total flux cleaned = -0.00140757 Jy ! Component: 200 - total flux cleaned = -0.00285726 Jy ! Total flux subtracted in 200 components = -0.00285726 Jy ! Clean residual min=-0.001630 max=0.001609 Jy/beam ! Clean residual mean=-0.000005 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0384721 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 111 components and 0.0384721 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.039 mas, bmaj=3.261 mas, bpa=-77 degrees ! Estimated noise=42.8698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000354745 Jy ! Component: 100 - total flux cleaned = -0.00150637 Jy ! Component: 150 - total flux cleaned = -0.00230998 Jy ! Component: 200 - total flux cleaned = -0.00303093 Jy ! Total flux subtracted in 200 components = -0.00303093 Jy ! Clean residual min=-0.000998 max=0.000985 Jy/beam ! Clean residual mean=-0.000003 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.0354412 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000706935 Jy ! Component: 100 - total flux cleaned = -0.00128558 Jy ! Component: 150 - total flux cleaned = -0.00168721 Jy ! Component: 200 - total flux cleaned = -0.00174369 Jy ! Total flux subtracted in 200 components = -0.00174369 Jy ! Clean residual min=-0.000975 max=0.000980 Jy/beam ! Clean residual mean=-0.000003 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.0336975 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 171 components and 0.0336975 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.727 mas, bmaj=2.9 mas, bpa=-43.45 degrees ! Estimated noise=44.008 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000194223 Jy ! Component: 100 - total flux cleaned = 0.000148076 Jy ! Component: 150 - total flux cleaned = 1.78734e-05 Jy ! Component: 200 - total flux cleaned = -6.72736e-05 Jy ! Total flux subtracted in 200 components = -6.72736e-05 Jy ! Clean residual min=-0.000701 max=0.000695 Jy/beam ! Clean residual mean=0.000002 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.0336302 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 206 components and 0.0336302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080726Jy sigma=0.022079 ! Fit after self-cal, rms=0.080744Jy sigma=0.022075 wmodel /scr/pima/rdv94_uvs/J1755+0454_X_map.mod ! Writing 206 model components to file: /scr/pima/rdv94_uvs/J1755+0454_X_map.mod wobs /scr/pima/rdv94_uvs/J1755+0454_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv94_uvs/J1755+0454_X_uvs.fits wwins /scr/pima/rdv94_uvs/J1755+0454_X_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: /home/lpetrov/bin/01_muppet] ! wmap "/scr/pima/rdv94_uvs/J1755+0454_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.727 x 2.9 at -43.45 degrees (North through East) ! Clean map min=-0.0055148 max=0.049645 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J1755+0454_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0496448 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000238177 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.43929 1.43929 2.87857 5.75714 11.5143 23.0286 46.0572 92.1143 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 quit ! Quitting program ! Log file /scr/pima/rdv94_uvs/J1755+0454_X_uvs.log closed on Mon Sep 23 22:12:58 2013