! Started logfile: /scr/pima/rdv94_uvs/J1755+0454_S_uvs.log on Mon Sep 23 22:13:09 2013 obs /scr/pima/rdv94_uvs/J1755+0454_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv94_uvs/J1755+0454_S_uva.fits ! AN table 1: 178 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.783106 visibilities/baseline/integration-bin. ! Found source: J1755+0454 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23693e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26693e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35693e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37693e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 15612 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J1755+0454_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.026580Jy sigma=0.775627 ! Fit after self-cal, rms=0.900927Jy sigma=0.627415 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.035 mas, bmaj=10.18 mas, bpa=-19.47 degrees ! Estimated noise=14.3443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0916172 Jy ! Component: 100 - total flux cleaned = 0.122745 Jy ! Total flux subtracted in 100 components = 0.122745 Jy ! Clean residual min=-0.012871 max=0.023623 Jy/beam ! Clean residual mean=0.000032 rms=0.004431 Jy/beam ! Combined flux in latest and established models = 0.122745 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.122745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114918Jy sigma=0.082951 ! Fit after self-cal, rms=0.114842Jy sigma=0.082716 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.035 mas, bmaj=11.16 mas, bpa=-17.36 degrees ! Estimated noise=8.61905 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220726 Jy ! Component: 100 - total flux cleaned = 0.0322103 Jy ! Component: 150 - total flux cleaned = 0.0373745 Jy ! Component: 200 - total flux cleaned = 0.0406029 Jy ! Total flux subtracted in 200 components = 0.0406029 Jy ! Clean residual min=-0.012631 max=0.020153 Jy/beam ! Clean residual mean=0.000036 rms=0.003859 Jy/beam ! Combined flux in latest and established models = 0.163348 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 62 components and 0.163348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113593Jy sigma=0.077449 ! Fit after self-cal, rms=0.113818Jy sigma=0.077368 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.82 HN 1.14 KP 1.12 ! LA 1.18 MK 0.70 NL 0.90 OV 1.15 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.90 HN 1.14 KP 1.11 ! LA 1.10 MK 0.78 NL 0.96 OV 1.14 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.93 HN 1.23 KP 0.98 ! LA 0.89 MK 0.87 NL 1.08 OV 1.17 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.86 HN 1.05 KP 0.88 ! LA 0.72 MK 0.80 NL 0.97 OV 1.07 ! ! ! Fit before self-cal, rms=0.113818Jy sigma=0.077368 ! Fit after self-cal, rms=0.108932Jy sigma=0.073578 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.915 mas, bmaj=10.97 mas, bpa=-18.26 degrees ! Estimated noise=8.23501 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107827 Jy ! Component: 100 - total flux cleaned = 0.0111626 Jy ! Component: 150 - total flux cleaned = 0.00956326 Jy ! Component: 200 - total flux cleaned = 0.0087078 Jy ! Total flux subtracted in 200 components = 0.0087078 Jy ! Clean residual min=-0.007371 max=0.010840 Jy/beam ! Clean residual mean=0.000020 rms=0.002385 Jy/beam ! Combined flux in latest and established models = 0.172055 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 85 components and 0.172055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106860Jy sigma=0.072313 ! Fit after self-cal, rms=0.106917Jy sigma=0.072018 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106917Jy sigma=0.072018 ! Fit after self-cal, rms=0.103771Jy sigma=0.071587 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.943 mas, bmaj=11.08 mas, bpa=-16.55 degrees ! Estimated noise=7.97482 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180876 Jy ! Component: 100 - total flux cleaned = 0.00343967 Jy ! Component: 150 - total flux cleaned = 0.00487698 Jy ! Component: 200 - total flux cleaned = 0.00632542 Jy ! Total flux subtracted in 200 components = 0.00632542 Jy ! Clean residual min=-0.005975 max=0.008706 Jy/beam ! Clean residual mean=0.000008 rms=0.001853 Jy/beam ! Combined flux in latest and established models = 0.178381 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 102 components and 0.178381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103085Jy sigma=0.071214 ! Fit after self-cal, rms=0.103154Jy sigma=0.071117 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (112.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00595306 Jy ! Component: 100 - total flux cleaned = 0.00765836 Jy ! Component: 150 - total flux cleaned = 0.00806711 Jy ! Component: 200 - total flux cleaned = 0.00852275 Jy ! Total flux subtracted in 200 components = 0.00852275 Jy ! Clean residual min=-0.004514 max=0.005209 Jy/beam ! Clean residual mean=0.000005 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.186904 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 139 components and 0.186904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102646Jy sigma=0.070549 ! Fit after self-cal, rms=0.102703Jy sigma=0.070488 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102703Jy sigma=0.070488 ! Fit after self-cal, rms=0.100672Jy sigma=0.070430 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.89 mas, bmaj=11.11 mas, bpa=-16.54 degrees ! Estimated noise=7.83184 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000589596 Jy ! Component: 100 - total flux cleaned = 0.000815222 Jy ! Component: 150 - total flux cleaned = 0.00120026 Jy ! Component: 200 - total flux cleaned = 0.00154214 Jy ! Total flux subtracted in 200 components = 0.00154214 Jy ! Clean residual min=-0.004181 max=0.004947 Jy/beam ! Clean residual mean=0.000005 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.188446 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 161 components and 0.188446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100458Jy sigma=0.070260 ! Fit after self-cal, rms=0.100549Jy sigma=0.070245 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (41, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041108 Jy ! Component: 100 - total flux cleaned = 0.00514138 Jy ! Component: 150 - total flux cleaned = 0.00621934 Jy ! Component: 200 - total flux cleaned = 0.00711615 Jy ! Total flux subtracted in 200 components = 0.00711615 Jy ! Clean residual min=-0.003690 max=0.003868 Jy/beam ! Clean residual mean=0.000001 rms=0.000976 Jy/beam ! Combined flux in latest and established models = 0.195562 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 187 components and 0.195562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100258Jy sigma=0.070068 ! Fit after self-cal, rms=0.100274Jy sigma=0.070029 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100274Jy sigma=0.070029 ! Fit after self-cal, rms=0.099340Jy sigma=0.070013 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.641 mas, bmaj=11.88 mas, bpa=-12.38 degrees ! Estimated noise=7.43724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110534 Jy ! Component: 100 - total flux cleaned = 0.00203718 Jy ! Component: 150 - total flux cleaned = 0.00263183 Jy ! Component: 200 - total flux cleaned = 0.00297335 Jy ! Total flux subtracted in 200 components = 0.00297335 Jy ! Clean residual min=-0.003336 max=0.003562 Jy/beam ! Clean residual mean=0.000002 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.198535 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 214 components and 0.198535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099210Jy sigma=0.069926 ! Fit after self-cal, rms=0.099249Jy sigma=0.069910 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000788601 Jy ! Component: 100 - total flux cleaned = 0.00111938 Jy ! Component: 150 - total flux cleaned = 0.00136042 Jy ! Component: 200 - total flux cleaned = 0.00146648 Jy ! Total flux subtracted in 200 components = 0.00146648 Jy ! Clean residual min=-0.003102 max=0.003272 Jy/beam ! Clean residual mean=0.000001 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.200002 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 239 components and 0.200002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099175Jy sigma=0.069858 ! Fit after self-cal, rms=0.099199Jy sigma=0.069850 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.86 mas, bmaj=11.15 mas, bpa=-16.67 degrees ! Estimated noise=7.75246 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.86 x 11.15 at -16.67 degrees (North through East) ! Clean map min=-0.0035625 max=0.10395 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.903 mas, bmaj=10.09 mas, bpa=-18.36 degrees ! Estimated noise=12.841 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0815636 Jy ! Component: 100 - total flux cleaned = 0.115714 Jy ! Component: 150 - total flux cleaned = 0.136179 Jy ! Component: 200 - total flux cleaned = 0.150075 Jy ! Total flux subtracted in 200 components = 0.150075 Jy ! Clean residual min=-0.009031 max=0.008496 Jy/beam ! Clean residual mean=0.000020 rms=0.002585 Jy/beam ! Combined flux in latest and established models = 0.150075 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.150075 Jy ! Inverting map and beam ! Estimated beam: bmin=6.86 mas, bmaj=11.15 mas, bpa=-16.67 degrees ! Estimated noise=7.75246 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123524 Jy ! Component: 100 - total flux cleaned = 0.0201933 Jy ! Component: 150 - total flux cleaned = 0.025582 Jy ! Component: 200 - total flux cleaned = 0.0298074 Jy ! Total flux subtracted in 200 components = 0.0298074 Jy ! Clean residual min=-0.005234 max=0.006098 Jy/beam ! Clean residual mean=0.000020 rms=0.001612 Jy/beam ! Combined flux in latest and established models = 0.179882 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 86 components and 0.179882 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.641 mas, bmaj=11.88 mas, bpa=-12.38 degrees ! Estimated noise=7.43724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00481404 Jy ! Component: 100 - total flux cleaned = 0.00811749 Jy ! Component: 150 - total flux cleaned = 0.0103809 Jy ! Component: 200 - total flux cleaned = 0.0117277 Jy ! Total flux subtracted in 200 components = 0.0117277 Jy ! Clean residual min=-0.004092 max=0.004986 Jy/beam ! Clean residual mean=0.000013 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.19161 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108098 Jy ! Component: 100 - total flux cleaned = 0.00205762 Jy ! Component: 150 - total flux cleaned = 0.00274311 Jy ! Component: 200 - total flux cleaned = 0.00335982 Jy ! Total flux subtracted in 200 components = 0.00335982 Jy ! Clean residual min=-0.003377 max=0.004211 Jy/beam ! Clean residual mean=0.000008 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.19497 Jy ! Adding 111 model components to the UV plane model. ! The established model now contains 191 components and 0.19497 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.86 mas, bmaj=11.15 mas, bpa=-16.67 degrees ! Estimated noise=7.75246 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00053588 Jy ! Component: 100 - total flux cleaned = -0.000385775 Jy ! Component: 150 - total flux cleaned = -0.000315567 Jy ! Component: 200 - total flux cleaned = -0.000249529 Jy ! Total flux subtracted in 200 components = -0.000249529 Jy ! Clean residual min=-0.003135 max=0.003854 Jy/beam ! Clean residual mean=0.000004 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.19472 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 229 components and 0.19472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099256Jy sigma=0.069946 ! Fit after self-cal, rms=0.099198Jy sigma=0.069913 wmodel /scr/pima/rdv94_uvs/J1755+0454_S_map.mod ! Writing 229 model components to file: /scr/pima/rdv94_uvs/J1755+0454_S_map.mod wobs /scr/pima/rdv94_uvs/J1755+0454_S_uvs.fits ! Writing UV FITS file: /scr/pima/rdv94_uvs/J1755+0454_S_uvs.fits wwins /scr/pima/rdv94_uvs/J1755+0454_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rdv94_uvs/J1755+0454_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000721787 Jy ! Component: 100 - total flux cleaned = 0.000980624 Jy ! Component: 150 - total flux cleaned = 0.00107476 Jy ! Component: 200 - total flux cleaned = 0.0013347 Jy ! Component: 250 - total flux cleaned = 0.00153604 Jy ! Component: 300 - total flux cleaned = 0.00168675 Jy ! Component: 350 - total flux cleaned = 0.00172196 Jy ! Component: 400 - total flux cleaned = 0.00175559 Jy ! Component: 450 - total flux cleaned = 0.00159147 Jy ! Component: 500 - total flux cleaned = 0.00152943 Jy ! Component: 550 - total flux cleaned = 0.00149985 Jy ! Component: 600 - total flux cleaned = 0.00149918 Jy ! Component: 650 - total flux cleaned = 0.00149848 Jy ! Component: 700 - total flux cleaned = 0.00149818 Jy ! Component: 750 - total flux cleaned = 0.00147192 Jy ! Component: 800 - total flux cleaned = 0.00152372 Jy ! Component: 850 - total flux cleaned = 0.00147329 Jy ! Component: 900 - total flux cleaned = 0.00149802 Jy ! Component: 950 - total flux cleaned = 0.00147417 Jy ! Component: 1000 - total flux cleaned = 0.00140419 Jy ! Component: 1050 - total flux cleaned = 0.00129061 Jy ! Component: 1100 - total flux cleaned = 0.00126881 Jy ! Component: 1150 - total flux cleaned = 0.00124732 Jy ! Component: 1200 - total flux cleaned = 0.0012469 Jy ! Component: 1250 - total flux cleaned = 0.00122633 Jy ! Component: 1300 - total flux cleaned = 0.00128702 Jy ! Component: 1350 - total flux cleaned = 0.00130726 Jy ! Component: 1400 - total flux cleaned = 0.00132666 Jy ! Component: 1450 - total flux cleaned = 0.00134586 Jy ! Component: 1500 - total flux cleaned = 0.0013644 Jy ! Component: 1550 - total flux cleaned = 0.00138255 Jy ! Component: 1600 - total flux cleaned = 0.00145445 Jy ! Component: 1650 - total flux cleaned = 0.00143659 Jy ! Component: 1700 - total flux cleaned = 0.00147128 Jy ! Component: 1750 - total flux cleaned = 0.00153917 Jy ! Component: 1800 - total flux cleaned = 0.00157246 Jy ! Component: 1850 - total flux cleaned = 0.00160544 Jy ! Component: 1900 - total flux cleaned = 0.00165446 Jy ! Component: 1950 - total flux cleaned = 0.00175163 Jy ! Component: 2000 - total flux cleaned = 0.0017677 Jy ! Component: 2050 - total flux cleaned = 0.00186229 Jy ! Component: 2100 - total flux cleaned = 0.00192463 Jy ! Component: 2150 - total flux cleaned = 0.00201645 Jy ! Component: 2200 - total flux cleaned = 0.00201645 Jy ! Component: 2250 - total flux cleaned = 0.00209145 Jy ! Component: 2300 - total flux cleaned = 0.0021804 Jy ! Component: 2350 - total flux cleaned = 0.00222422 Jy ! Component: 2400 - total flux cleaned = 0.00226788 Jy ! Component: 2450 - total flux cleaned = 0.00235367 Jy ! Component: 2500 - total flux cleaned = 0.00243866 Jy ! Component: 2550 - total flux cleaned = 0.00246665 Jy ! Component: 2600 - total flux cleaned = 0.00257742 Jy ! Component: 2650 - total flux cleaned = 0.00260465 Jy ! Component: 2700 - total flux cleaned = 0.00267244 Jy ! Component: 2750 - total flux cleaned = 0.00269935 Jy ! Component: 2800 - total flux cleaned = 0.00277922 Jy ! Component: 2850 - total flux cleaned = 0.00276601 Jy ! Component: 2900 - total flux cleaned = 0.00284467 Jy ! Component: 2950 - total flux cleaned = 0.00289646 Jy ! Component: 3000 - total flux cleaned = 0.00290928 Jy ! Component: 3050 - total flux cleaned = 0.00290921 Jy ! Component: 3100 - total flux cleaned = 0.00295999 Jy ! Component: 3150 - total flux cleaned = 0.00299775 Jy ! Component: 3200 - total flux cleaned = 0.0030728 Jy ! Component: 3250 - total flux cleaned = 0.00307269 Jy ! Component: 3300 - total flux cleaned = 0.00315929 Jy ! Component: 3350 - total flux cleaned = 0.00320825 Jy ! Component: 3400 - total flux cleaned = 0.00326923 Jy ! Component: 3450 - total flux cleaned = 0.00335424 Jy ! Component: 3500 - total flux cleaned = 0.00340251 Jy ! Component: 3550 - total flux cleaned = 0.00347451 Jy ! Component: 3600 - total flux cleaned = 0.00355799 Jy ! Component: 3650 - total flux cleaned = 0.00361734 Jy ! Component: 3700 - total flux cleaned = 0.00368818 Jy ! Component: 3750 - total flux cleaned = 0.00375855 Jy ! Component: 3800 - total flux cleaned = 0.0038051 Jy ! Component: 3850 - total flux cleaned = 0.00385144 Jy ! Component: 3900 - total flux cleaned = 0.00390928 Jy ! Component: 3950 - total flux cleaned = 0.00394377 Jy ! Component: 4000 - total flux cleaned = 0.0040352 Jy ! Component: 4050 - total flux cleaned = 0.00411478 Jy ! Total flux subtracted in 4096 components = 0.00414864 Jy ! Clean residual min=-0.000652 max=0.000665 Jy/beam ! Clean residual mean=0.000001 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.198869 Jy keep ! Adding 349 model components to the UV plane model. ! The established model now contains 578 components and 0.198869 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv94_uvs/J1755+0454_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.86 x 11.15 at -16.67 degrees (North through East) ! Clean map min=-0.0021843 max=0.10213 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J1755+0454_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.10213 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000221802 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.651526 0.651526 1.30305 2.60611 5.21221 10.4244 20.8488 41.6977 83.3954 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.102 quit ! Quitting program ! Log file /scr/pima/rdv94_uvs/J1755+0454_S_uvs.log closed on Mon Sep 23 22:13:15 2013