! Started logfile: /scr/pima/rdv94_uvs/J1540-3906_S_uvs.log on Mon Sep 23 22:12:21 2013
obs /scr/pima/rdv94_uvs/J1540-3906_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv94_uvs/J1540-3906_S_uva.fits
! AN table 1: 89 integrations on 6 of 6 possible baselines.
! AN table 2: 89 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.997893 visibilities/baseline/integration-bin.
! Found source: J1540-3906
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09      1.6e+07          1      1.6e+07
!  02        2  2.26693e+09      1.6e+07          1      1.6e+07
!  03        3  2.35693e+09      1.6e+07          1      1.6e+07
!  04        4  2.37693e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 5684 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J1540-3906_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.043910Jy  sigma=0.805451
! Fit after  self-cal, rms=0.855808Jy  sigma=0.627858
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.23 mas, bmaj=32.88 mas, bpa=-15.22 degrees
! Estimated noise=56.3628 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.118636 Jy
! Component: 100  -  total flux cleaned = 0.15999 Jy
! Total flux subtracted in 100 components = 0.15999 Jy
! Clean residual min=-0.013653 max=0.019098 Jy/beam
! Clean residual mean=0.000211 rms=0.005356 Jy/beam
! Combined flux in latest and established models = 0.15999 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.15999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141409Jy  sigma=0.101455
! Fit after  self-cal, rms=0.141471Jy  sigma=0.101355
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.994 mas, bmaj=31.02 mas, bpa=-13.39 degrees
! Estimated noise=13.3076 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0276543 Jy
! Component: 100  -  total flux cleaned = 0.0403032 Jy
! Component: 150  -  total flux cleaned = 0.0491751 Jy
! Component: 200  -  total flux cleaned = 0.0553378 Jy
! Total flux subtracted in 200 components = 0.0553378 Jy
! Clean residual min=-0.005204 max=0.005246 Jy/beam
! Clean residual mean=0.000074 rms=0.001989 Jy/beam
! Combined flux in latest and established models = 0.215328 Jy
! Performing phase self-cal
! Adding 83 model components to the UV plane model.
! The established model now contains 104 components and 0.215328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136740Jy  sigma=0.096047
! Fit after  self-cal, rms=0.137064Jy  sigma=0.095987
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.88     KP        1.02     LA        1.23     NL        1.09     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.99     KP        0.97     LA        1.23     MK        0.96     
!   OV        0.98     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        1.04     LA        1.07     NL        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00     KP        1.05     LA        1.19     MK        1.02     
!   OV        1.01     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        0.95     LA        0.96     NL        1.10     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.03     KP        0.94     LA        0.99     MK        1.03     
!   OV        1.07     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     KP        0.95     LA        0.78     NL        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.97     KP        0.90     LA        0.76     MK        1.10     
!   OV        0.91     
! 
! 
! Fit before self-cal, rms=0.137064Jy  sigma=0.095987
! Fit after  self-cal, rms=0.133703Jy  sigma=0.092875
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.061 mas, bmaj=30.94 mas, bpa=-13.3 degrees
! Estimated noise=13.1126 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000457917 Jy
! Component: 100  -  total flux cleaned = 0.00031392 Jy
! Component: 150  -  total flux cleaned = 0.00121869 Jy
! Component: 200  -  total flux cleaned = 0.00193777 Jy
! Total flux subtracted in 200 components = 0.00193777 Jy
! Clean residual min=-0.001417 max=0.001426 Jy/beam
! Clean residual mean=0.000000 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.217266 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 172 components and 0.217266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133376Jy  sigma=0.092755
! Fit after  self-cal, rms=0.133889Jy  sigma=0.092643
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133889Jy  sigma=0.092643
! Fit after  self-cal, rms=0.134906Jy  sigma=0.092628
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.078 mas, bmaj=30.94 mas, bpa=-13.28 degrees
! Estimated noise=13.1441 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00044113 Jy
! Component: 100  -  total flux cleaned = 0.000360201 Jy
! Component: 150  -  total flux cleaned = 0.000686017 Jy
! Component: 200  -  total flux cleaned = 0.000901911 Jy
! Total flux subtracted in 200 components = 0.000901911 Jy
! Clean residual min=-0.001201 max=0.001196 Jy/beam
! Clean residual mean=-0.000002 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.218168 Jy
selfcal
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 220 components and 0.218167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134727Jy  sigma=0.092581
! Fit after  self-cal, rms=0.134949Jy  sigma=0.092573
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000239862 Jy
! Component: 100  -  total flux cleaned = 0.000318648 Jy
! Component: 150  -  total flux cleaned = 0.000250806 Jy
! Component: 200  -  total flux cleaned = 0.000250157 Jy
! Total flux subtracted in 200 components = 0.000250157 Jy
! Clean residual min=-0.001081 max=0.001086 Jy/beam
! Clean residual mean=-0.000003 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.218418 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 267 components and 0.218418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134813Jy  sigma=0.092542
! Fit after  self-cal, rms=0.134900Jy  sigma=0.092540
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134900Jy  sigma=0.092540
! Fit after  self-cal, rms=0.135076Jy  sigma=0.092537
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.074 mas, bmaj=30.92 mas, bpa=-13.29 degrees
! Estimated noise=13.147 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000203256 Jy
! Component: 100  -  total flux cleaned = -0.000665745 Jy
! Component: 150  -  total flux cleaned = -0.000912697 Jy
! Component: 200  -  total flux cleaned = -0.000796018 Jy
! Total flux subtracted in 200 components = -0.000796018 Jy
! Clean residual min=-0.000971 max=0.000969 Jy/beam
! Clean residual mean=-0.000002 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.217622 Jy
selfcal
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 297 components and 0.217622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134970Jy  sigma=0.092513
! Fit after  self-cal, rms=0.135069Jy  sigma=0.092511
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000195511 Jy
! Component: 100  -  total flux cleaned = -0.000199033 Jy
! Component: 150  -  total flux cleaned = -0.000313197 Jy
! Component: 200  -  total flux cleaned = -0.000480104 Jy
! Total flux subtracted in 200 components = -0.000480104 Jy
! Clean residual min=-0.000926 max=0.000925 Jy/beam
! Clean residual mean=-0.000005 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.217142 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 319 components and 0.217142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134982Jy  sigma=0.092493
! Fit after  self-cal, rms=0.135040Jy  sigma=0.092492
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135040Jy  sigma=0.092492
! Fit after  self-cal, rms=0.135031Jy  sigma=0.092490
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.28 mas, bmaj=41.69 mas, bpa=-0.627 degrees
! Estimated noise=12.7135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00010558 Jy
! Component: 100  -  total flux cleaned = -0.000444706 Jy
! Component: 150  -  total flux cleaned = -0.000882188 Jy
! Component: 200  -  total flux cleaned = -0.00145342 Jy
! Total flux subtracted in 200 components = -0.00145342 Jy
! Clean residual min=-0.000623 max=0.000619 Jy/beam
! Clean residual mean=-0.000001 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.215688 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 364 components and 0.215688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134988Jy  sigma=0.092478
! Fit after  self-cal, rms=0.135038Jy  sigma=0.092477
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000286495 Jy
! Component: 100  -  total flux cleaned = -0.000805614 Jy
! Component: 150  -  total flux cleaned = -0.00116212 Jy
! Component: 200  -  total flux cleaned = -0.00133442 Jy
! Total flux subtracted in 200 components = -0.00133442 Jy
! Clean residual min=-0.000569 max=0.000576 Jy/beam
! Clean residual mean=-0.000002 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.214354 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 394 components and 0.214354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135003Jy  sigma=0.092468
! Fit after  self-cal, rms=0.135032Jy  sigma=0.092467
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.064 mas, bmaj=30.9 mas, bpa=-13.3 degrees
! Estimated noise=13.1488 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.064 x 30.9 at -13.3 degrees (North through East)
! Clean map  min=-0.0041064  max=0.14089 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.262 mas, bmaj=32.69 mas, bpa=-15.21 degrees
! Estimated noise=56.3352 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117256 Jy
! Component: 100  -  total flux cleaned = 0.158612 Jy
! Component: 150  -  total flux cleaned = 0.180134 Jy
! Component: 200  -  total flux cleaned = 0.184757 Jy
! Total flux subtracted in 200 components = 0.184757 Jy
! Clean residual min=-0.006983 max=0.006993 Jy/beam
! Clean residual mean=0.000072 rms=0.002486 Jy/beam
! Combined flux in latest and established models = 0.184757 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 51 model components to the UV plane model.
! The established model now contains 51 components and 0.184757 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.064 mas, bmaj=30.9 mas, bpa=-13.3 degrees
! Estimated noise=13.1488 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00616311 Jy
! Component: 100  -  total flux cleaned = 0.00523703 Jy
! Component: 150  -  total flux cleaned = 0.00395383 Jy
! Component: 200  -  total flux cleaned = 0.00274169 Jy
! Total flux subtracted in 200 components = 0.00274169 Jy
! Clean residual min=-0.002669 max=0.002675 Jy/beam
! Clean residual mean=0.000032 rms=0.001028 Jy/beam
! Combined flux in latest and established models = 0.187499 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 112 components and 0.187498 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.28 mas, bmaj=41.69 mas, bpa=-0.627 degrees
! Estimated noise=12.7135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000676565 Jy
! Component: 100  -  total flux cleaned = -0.00123097 Jy
! Component: 150  -  total flux cleaned = -0.0022463 Jy
! Component: 200  -  total flux cleaned = -0.00353323 Jy
! Total flux subtracted in 200 components = -0.00353323 Jy
! Clean residual min=-0.001457 max=0.001465 Jy/beam
! Clean residual mean=0.000018 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.183965 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00117173 Jy
! Component: 100  -  total flux cleaned = -0.00255584 Jy
! Component: 150  -  total flux cleaned = -0.00362821 Jy
! Component: 200  -  total flux cleaned = -0.00408955 Jy
! Total flux subtracted in 200 components = -0.00408955 Jy
! Clean residual min=-0.001060 max=0.001048 Jy/beam
! Clean residual mean=0.000011 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.179876 Jy
! Adding 109 model components to the UV plane model.
! The established model now contains 221 components and 0.179876 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.064 mas, bmaj=30.9 mas, bpa=-13.3 degrees
! Estimated noise=13.1488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00083499 Jy
! Component: 100  -  total flux cleaned = -0.00117096 Jy
! Component: 150  -  total flux cleaned = -0.00177508 Jy
! Component: 200  -  total flux cleaned = -0.00170144 Jy
! Total flux subtracted in 200 components = -0.00170144 Jy
! Clean residual min=-0.001134 max=0.001135 Jy/beam
! Clean residual mean=0.000004 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.178174 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 270 components and 0.178174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135191Jy  sigma=0.092513
! Fit after  self-cal, rms=0.135133Jy  sigma=0.092508
wmodel /scr/pima/rdv94_uvs/J1540-3906_S_map.mod
! Writing 270 model components to file: /scr/pima/rdv94_uvs/J1540-3906_S_map.mod
wobs /scr/pima/rdv94_uvs/J1540-3906_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv94_uvs/J1540-3906_S_uvs.fits
wwins /scr/pima/rdv94_uvs/J1540-3906_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/rdv94_uvs/J1540-3906_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.064 x 30.9 at -13.3 degrees (North through East)
! Clean map  min=-0.0047697  max=0.13642 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J1540-3906_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.136422 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000436968 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.960914 0.960914 1.92183 3.84366 7.68732 15.3746 30.7493 61.4985
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0013 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.136 
quit
! Quitting program
! Log file /scr/pima/rdv94_uvs/J1540-3906_S_uvs.log closed on Mon Sep 23 22:12:25 2013