! Started logfile: /scr/pima/rdv94_uvs/J1424+0434_X_uvs.log on Mon Sep 23 22:11:52 2013 obs /scr/pima/rdv94_uvs/J1424+0434_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv94_uvs/J1424+0434_X_uva.fits ! AN table 1: 179 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.784451 visibilities/baseline/integration-bin. ! Found source: J1424+0434 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47993e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79493e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89993e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 20220 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J1424+0434_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.016784Jy sigma=1.084843 ! Fit after self-cal, rms=0.846508Jy sigma=0.895074 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8145 mas, bmaj=3.138 mas, bpa=-20.06 degrees ! Estimated noise=9.62237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125312 Jy ! Component: 100 - total flux cleaned = 0.152647 Jy ! Total flux subtracted in 100 components = 0.152647 Jy ! Clean residual min=-0.005747 max=0.007705 Jy/beam ! Clean residual mean=-0.000001 rms=0.001669 Jy/beam ! Combined flux in latest and established models = 0.152647 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.152647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113352Jy sigma=0.111531 ! Fit after self-cal, rms=0.113354Jy sigma=0.111524 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9739 mas, bmaj=3.132 mas, bpa=-18.77 degrees ! Estimated noise=4.78124 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00893889 Jy ! Component: 100 - total flux cleaned = 0.0133555 Jy ! Component: 150 - total flux cleaned = 0.0147223 Jy ! Component: 200 - total flux cleaned = 0.015489 Jy ! Total flux subtracted in 200 components = 0.015489 Jy ! Clean residual min=-0.003608 max=0.005817 Jy/beam ! Clean residual mean=0.000002 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.168136 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 33 components and 0.168136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112686Jy sigma=0.110762 ! Fit after self-cal, rms=0.112700Jy sigma=0.110745 ! Inverting map ! Added new window around map position (2.4, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00482102 Jy ! Component: 100 - total flux cleaned = 0.00725347 Jy ! Component: 150 - total flux cleaned = 0.00787855 Jy ! Component: 200 - total flux cleaned = 0.0084597 Jy ! Total flux subtracted in 200 components = 0.0084597 Jy ! Clean residual min=-0.003418 max=0.003679 Jy/beam ! Clean residual mean=0.000003 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.176596 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 70 components and 0.176596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112464Jy sigma=0.110490 ! Fit after self-cal, rms=0.112451Jy sigma=0.110464 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.02 HN 0.96 KP 1.01 ! LA 1.00 MK 0.99 NL 0.97 OV 1.01 ! PT 1.17 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 1.00 HN 0.98 KP 0.96 ! LA 0.97 MK 1.02 NL 0.97 OV 0.99 ! PT 1.27 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.03 KP 0.87 ! LA 1.03 MK 1.00 NL 1.01 OV 1.02 ! PT 1.17 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.07 HN 0.96 KP 0.90 ! LA 1.06 MK 1.04 NL 1.00 OV 1.01 ! PT 1.18 ! ! ! Fit before self-cal, rms=0.112451Jy sigma=0.110464 ! Fit after self-cal, rms=0.110742Jy sigma=0.109595 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9751 mas, bmaj=3.16 mas, bpa=-18.74 degrees ! Estimated noise=4.77041 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121279 Jy ! Component: 100 - total flux cleaned = 0.00137293 Jy ! Component: 150 - total flux cleaned = 0.00137083 Jy ! Component: 200 - total flux cleaned = 0.00144596 Jy ! Total flux subtracted in 200 components = 0.00144596 Jy ! Clean residual min=-0.002364 max=0.002287 Jy/beam ! Clean residual mean=0.000001 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.178042 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 95 components and 0.178042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110694Jy sigma=0.109546 ! Fit after self-cal, rms=0.110737Jy sigma=0.109522 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110737Jy sigma=0.109522 ! Fit after self-cal, rms=0.110161Jy sigma=0.109395 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9756 mas, bmaj=3.157 mas, bpa=-18.7 degrees ! Estimated noise=4.76323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000888943 Jy ! Component: 100 - total flux cleaned = 0.000753217 Jy ! Component: 150 - total flux cleaned = 0.000670693 Jy ! Component: 200 - total flux cleaned = 0.000693992 Jy ! Total flux subtracted in 200 components = 0.000693992 Jy ! Clean residual min=-0.001863 max=0.002051 Jy/beam ! Clean residual mean=-0.000000 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.178736 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 114 components and 0.178736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110141Jy sigma=0.109378 ! Fit after self-cal, rms=0.110147Jy sigma=0.109374 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-17.4, -18.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000630807 Jy ! Component: 100 - total flux cleaned = 0.000323957 Jy ! Component: 150 - total flux cleaned = 0.000216918 Jy ! Component: 200 - total flux cleaned = 0.000275154 Jy ! Total flux subtracted in 200 components = 0.000275154 Jy ! Clean residual min=-0.001850 max=0.001767 Jy/beam ! Clean residual mean=0.000000 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.179011 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 135 components and 0.179011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110107Jy sigma=0.109337 ! Fit after self-cal, rms=0.110101Jy sigma=0.109334 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110101Jy sigma=0.109334 ! Fit after self-cal, rms=0.110137Jy sigma=0.109328 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9765 mas, bmaj=3.159 mas, bpa=-18.69 degrees ! Estimated noise=4.75853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.75221e-05 Jy ! Component: 100 - total flux cleaned = -0.000147831 Jy ! Component: 150 - total flux cleaned = -0.0002478 Jy ! Component: 200 - total flux cleaned = -0.000201213 Jy ! Total flux subtracted in 200 components = -0.000201213 Jy ! Clean residual min=-0.001758 max=0.001693 Jy/beam ! Clean residual mean=-0.000000 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.17881 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 149 components and 0.17881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110122Jy sigma=0.109314 ! Fit after self-cal, rms=0.110126Jy sigma=0.109314 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.78328e-05 Jy ! Component: 100 - total flux cleaned = 1.2725e-05 Jy ! Component: 150 - total flux cleaned = 0.000120526 Jy ! Component: 200 - total flux cleaned = 0.000244879 Jy ! Total flux subtracted in 200 components = 0.000244879 Jy ! Clean residual min=-0.001715 max=0.001679 Jy/beam ! Clean residual mean=-0.000000 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.179055 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 161 components and 0.179055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110118Jy sigma=0.109306 ! Fit after self-cal, rms=0.110117Jy sigma=0.109306 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110117Jy sigma=0.109306 ! Fit after self-cal, rms=0.110120Jy sigma=0.109303 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.057 mas, bmaj=3.308 mas, bpa=-11.64 degrees ! Estimated noise=5.61068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221259 Jy ! Component: 100 - total flux cleaned = 0.000195586 Jy ! Component: 150 - total flux cleaned = 0.000326184 Jy ! Component: 200 - total flux cleaned = 0.000444475 Jy ! Total flux subtracted in 200 components = 0.000444475 Jy ! Clean residual min=-0.001749 max=0.001690 Jy/beam ! Clean residual mean=-0.000000 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.179499 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 182 components and 0.179499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110116Jy sigma=0.109298 ! Fit after self-cal, rms=0.110120Jy sigma=0.109298 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236397 Jy ! Component: 100 - total flux cleaned = 0.000421464 Jy ! Component: 150 - total flux cleaned = 0.000539531 Jy ! Component: 200 - total flux cleaned = 0.000665177 Jy ! Total flux subtracted in 200 components = 0.000665177 Jy ! Clean residual min=-0.001740 max=0.001659 Jy/beam ! Clean residual mean=0.000000 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.180164 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 188 components and 0.180164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110118Jy sigma=0.109296 ! Fit after self-cal, rms=0.110117Jy sigma=0.109296 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9769 mas, bmaj=3.16 mas, bpa=-18.69 degrees ! Estimated noise=4.75509 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9769 x 3.16 at -18.69 degrees (North through East) ! Clean map min=-0.0015726 max=0.16053 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8161 mas, bmaj=3.155 mas, bpa=-20.01 degrees ! Estimated noise=9.07681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125114 Jy ! Component: 100 - total flux cleaned = 0.152426 Jy ! Component: 150 - total flux cleaned = 0.160197 Jy ! Component: 200 - total flux cleaned = 0.165446 Jy ! Total flux subtracted in 200 components = 0.165446 Jy ! Clean residual min=-0.004762 max=0.004674 Jy/beam ! Clean residual mean=-0.000001 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.165446 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.165446 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9769 mas, bmaj=3.16 mas, bpa=-18.69 degrees ! Estimated noise=4.75509 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457296 Jy ! Component: 100 - total flux cleaned = 0.00740943 Jy ! Component: 150 - total flux cleaned = 0.0084138 Jy ! Component: 200 - total flux cleaned = 0.00907607 Jy ! Total flux subtracted in 200 components = 0.00907607 Jy ! Clean residual min=-0.002326 max=0.001952 Jy/beam ! Clean residual mean=-0.000001 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.174523 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 48 components and 0.174523 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.057 mas, bmaj=3.308 mas, bpa=-11.64 degrees ! Estimated noise=5.61068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141827 Jy ! Component: 100 - total flux cleaned = 0.00189652 Jy ! Component: 150 - total flux cleaned = 0.00246319 Jy ! Component: 200 - total flux cleaned = 0.00270751 Jy ! Total flux subtracted in 200 components = 0.00270751 Jy ! Clean residual min=-0.001695 max=0.002042 Jy/beam ! Clean residual mean=-0.000001 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.17723 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000304951 Jy ! Component: 100 - total flux cleaned = 0.000662595 Jy ! Component: 150 - total flux cleaned = 0.00105889 Jy ! Component: 200 - total flux cleaned = 0.00138847 Jy ! Total flux subtracted in 200 components = 0.00138847 Jy ! Clean residual min=-0.001644 max=0.001849 Jy/beam ! Clean residual mean=-0.000000 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.178619 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 100 components and 0.178619 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9769 mas, bmaj=3.16 mas, bpa=-18.69 degrees ! Estimated noise=4.75509 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000502986 Jy ! Component: 100 - total flux cleaned = 0.000594907 Jy ! Component: 150 - total flux cleaned = 0.000675265 Jy ! Component: 200 - total flux cleaned = 0.000712921 Jy ! Total flux subtracted in 200 components = 0.000712921 Jy ! Clean residual min=-0.001900 max=0.001863 Jy/beam ! Clean residual mean=0.000000 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.179331 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 129 components and 0.179331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110162Jy sigma=0.109338 ! Fit after self-cal, rms=0.110158Jy sigma=0.109332 wmodel /scr/pima/rdv94_uvs/J1424+0434_X_map.mod ! Writing 129 model components to file: /scr/pima/rdv94_uvs/J1424+0434_X_map.mod wobs /scr/pima/rdv94_uvs/J1424+0434_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv94_uvs/J1424+0434_X_uvs.fits wwins /scr/pima/rdv94_uvs/J1424+0434_X_map.win ! wwins: Wrote 3 windows to /scr/pima/rdv94_uvs/J1424+0434_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250024 Jy ! Component: 100 - total flux cleaned = -0.000126258 Jy ! Component: 150 - total flux cleaned = -4.07573e-05 Jy ! Component: 200 - total flux cleaned = 4.16596e-05 Jy ! Component: 250 - total flux cleaned = 0.000174116 Jy ! Component: 300 - total flux cleaned = 0.000251353 Jy ! Component: 350 - total flux cleaned = 0.000351682 Jy ! Component: 400 - total flux cleaned = 0.000424265 Jy ! Component: 450 - total flux cleaned = 0.000447809 Jy ! Component: 500 - total flux cleaned = 0.000470991 Jy ! Component: 550 - total flux cleaned = 0.000516664 Jy ! Component: 600 - total flux cleaned = 0.000539095 Jy ! Component: 650 - total flux cleaned = 0.000539195 Jy ! Component: 700 - total flux cleaned = 0.000605371 Jy ! Component: 750 - total flux cleaned = 0.000692312 Jy ! Component: 800 - total flux cleaned = 0.000734651 Jy ! Component: 850 - total flux cleaned = 0.000776461 Jy ! Component: 900 - total flux cleaned = 0.000818153 Jy ! Component: 950 - total flux cleaned = 0.000859186 Jy ! Component: 1000 - total flux cleaned = 0.00096006 Jy ! Component: 1050 - total flux cleaned = 0.00107932 Jy ! Component: 1100 - total flux cleaned = 0.00121618 Jy ! Component: 1150 - total flux cleaned = 0.00117693 Jy ! Component: 1200 - total flux cleaned = 0.00119626 Jy ! Component: 1250 - total flux cleaned = 0.0012721 Jy ! Component: 1300 - total flux cleaned = 0.00130921 Jy ! Component: 1350 - total flux cleaned = 0.00130917 Jy ! Component: 1400 - total flux cleaned = 0.00130923 Jy ! Component: 1450 - total flux cleaned = 0.0012551 Jy ! Component: 1500 - total flux cleaned = 0.00138013 Jy ! Component: 1550 - total flux cleaned = 0.00130913 Jy ! Component: 1600 - total flux cleaned = 0.00127421 Jy ! Component: 1650 - total flux cleaned = 0.00136062 Jy ! Component: 1700 - total flux cleaned = 0.00130902 Jy ! Component: 1750 - total flux cleaned = 0.00132616 Jy ! Component: 1800 - total flux cleaned = 0.0013263 Jy ! Component: 1850 - total flux cleaned = 0.0012763 Jy ! Component: 1900 - total flux cleaned = 0.00132591 Jy ! Component: 1950 - total flux cleaned = 0.00137509 Jy ! Component: 2000 - total flux cleaned = 0.00134243 Jy ! Component: 2050 - total flux cleaned = 0.00135856 Jy ! Component: 2100 - total flux cleaned = 0.00137469 Jy ! Component: 2150 - total flux cleaned = 0.00140631 Jy ! Component: 2200 - total flux cleaned = 0.00134333 Jy ! Component: 2250 - total flux cleaned = 0.00142143 Jy ! Component: 2300 - total flux cleaned = 0.0013746 Jy ! Component: 2350 - total flux cleaned = 0.00132839 Jy ! Component: 2400 - total flux cleaned = 0.00134379 Jy ! Component: 2450 - total flux cleaned = 0.00131334 Jy ! Component: 2500 - total flux cleaned = 0.00132838 Jy ! Component: 2550 - total flux cleaned = 0.00137319 Jy ! Component: 2600 - total flux cleaned = 0.00135856 Jy ! Component: 2650 - total flux cleaned = 0.00137349 Jy ! Component: 2700 - total flux cleaned = 0.00137362 Jy ! Component: 2750 - total flux cleaned = 0.00146064 Jy ! Component: 2800 - total flux cleaned = 0.00144643 Jy ! Component: 2850 - total flux cleaned = 0.00148933 Jy ! Component: 2900 - total flux cleaned = 0.00148916 Jy ! Component: 2950 - total flux cleaned = 0.0015737 Jy ! Component: 3000 - total flux cleaned = 0.00157346 Jy ! Component: 3050 - total flux cleaned = 0.00155946 Jy ! Component: 3100 - total flux cleaned = 0.00154549 Jy ! Component: 3150 - total flux cleaned = 0.00155909 Jy ! Component: 3200 - total flux cleaned = 0.0015182 Jy ! Component: 3250 - total flux cleaned = 0.00159967 Jy ! Component: 3300 - total flux cleaned = 0.00155921 Jy ! Component: 3350 - total flux cleaned = 0.00153237 Jy ! Component: 3400 - total flux cleaned = 0.00155903 Jy ! Component: 3450 - total flux cleaned = 0.00151938 Jy ! Component: 3500 - total flux cleaned = 0.00151954 Jy ! Component: 3550 - total flux cleaned = 0.00149345 Jy ! Component: 3600 - total flux cleaned = 0.00153253 Jy ! Component: 3650 - total flux cleaned = 0.00154541 Jy ! Component: 3700 - total flux cleaned = 0.00154536 Jy ! Component: 3750 - total flux cleaned = 0.00154523 Jy ! Component: 3800 - total flux cleaned = 0.00150724 Jy ! Component: 3850 - total flux cleaned = 0.00151988 Jy ! Component: 3900 - total flux cleaned = 0.00154499 Jy ! Component: 3950 - total flux cleaned = 0.00154491 Jy ! Component: 4000 - total flux cleaned = 0.00155722 Jy ! Component: 4050 - total flux cleaned = 0.00154481 Jy ! Total flux subtracted in 4096 components = 0.0015203 Jy ! Clean residual min=-0.000695 max=0.000784 Jy/beam ! Clean residual mean=0.000000 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.180852 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 427 components and 0.180852 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv94_uvs/J1424+0434_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9769 x 3.16 at -18.69 degrees (North through East) ! Clean map min=-0.0014203 max=0.16039 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J1424+0434_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.160393 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00021859 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.408851 0.408851 0.817703 1.63541 3.27081 6.54162 13.0832 26.1665 52.333 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.16 quit ! Quitting program ! Log file /scr/pima/rdv94_uvs/J1424+0434_X_uvs.log closed on Mon Sep 23 22:11:58 2013