! Started logfile: /scr/pima/rdv94_uvs/J1318+0430_X_uvs.log on Mon Sep 23 22:11:33 2013 obs /scr/pima/rdv94_uvs/J1318+0430_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv94_uvs/J1318+0430_X_uva.fits ! AN table 1: 179 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.886096 visibilities/baseline/integration-bin. ! Found source: J1318+0430 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47993e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79493e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89993e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 22840 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J1318+0430_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.025637Jy sigma=0.928690 ! Fit after self-cal, rms=0.869777Jy sigma=0.787459 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8526 mas, bmaj=3.12 mas, bpa=-20.64 degrees ! Estimated noise=11.4717 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106619 Jy ! Component: 100 - total flux cleaned = 0.130043 Jy ! Total flux subtracted in 100 components = 0.130043 Jy ! Clean residual min=-0.005086 max=0.007511 Jy/beam ! Clean residual mean=0.000000 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 0.130043 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.130043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107621Jy sigma=0.092821 ! Fit after self-cal, rms=0.107593Jy sigma=0.092800 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00781738 Jy ! Component: 100 - total flux cleaned = 0.00913734 Jy ! Total flux subtracted in 100 components = 0.00913734 Jy ! Clean residual min=-0.004250 max=0.004308 Jy/beam ! Clean residual mean=0.000001 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.13918 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.13918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107098Jy sigma=0.092273 ! Fit after self-cal, rms=0.107118Jy sigma=0.092269 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.064 mas, bmaj=3.179 mas, bpa=-18.55 degrees ! Estimated noise=5.24898 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340148 Jy ! Component: 100 - total flux cleaned = 0.00527343 Jy ! Component: 150 - total flux cleaned = 0.00656246 Jy ! Component: 200 - total flux cleaned = 0.00741781 Jy ! Total flux subtracted in 200 components = 0.00741781 Jy ! Clean residual min=-0.002737 max=0.003625 Jy/beam ! Clean residual mean=0.000001 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.146598 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.146598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107014Jy sigma=0.092152 ! Fit after self-cal, rms=0.107035Jy sigma=0.092147 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 0.94 KP 1.07 ! LA 1.03 MK 1.00 NL 0.98 OV 0.98 ! PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.35 FD 1.02 HN 0.98 KP 0.97 ! LA 0.98 MK 1.03 NL 0.99 OV 0.98 ! PT 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.00 KP 0.88 ! LA 1.03 MK 0.99 NL 0.99 OV 1.03 ! PT 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.05 HN 1.02 KP 0.94 ! LA 1.02 MK 1.05 NL 1.02 OV 1.00 ! PT 1.02 ! ! ! Fit before self-cal, rms=0.107035Jy sigma=0.092147 ! Fit after self-cal, rms=0.106026Jy sigma=0.091592 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.068 mas, bmaj=3.196 mas, bpa=-18.5 degrees ! Estimated noise=5.23642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, -5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317409 Jy ! Component: 100 - total flux cleaned = 0.00464758 Jy ! Component: 150 - total flux cleaned = 0.0055019 Jy ! Component: 200 - total flux cleaned = 0.00550155 Jy ! Total flux subtracted in 200 components = 0.00550155 Jy ! Clean residual min=-0.001921 max=0.002278 Jy/beam ! Clean residual mean=0.000001 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.152099 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 64 components and 0.152099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105926Jy sigma=0.091503 ! Fit after self-cal, rms=0.105983Jy sigma=0.091478 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105983Jy sigma=0.091478 ! Fit after self-cal, rms=0.106291Jy sigma=0.091441 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.069 mas, bmaj=3.194 mas, bpa=-18.49 degrees ! Estimated noise=5.23525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.93928e-05 Jy ! Component: 100 - total flux cleaned = 0.000196405 Jy ! Component: 150 - total flux cleaned = 0.000277166 Jy ! Component: 200 - total flux cleaned = 0.00027787 Jy ! Total flux subtracted in 200 components = 0.00027787 Jy ! Clean residual min=-0.001813 max=0.001822 Jy/beam ! Clean residual mean=0.000001 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.152377 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.152377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106273Jy sigma=0.091429 ! Fit after self-cal, rms=0.106292Jy sigma=0.091427 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119591 Jy ! Component: 100 - total flux cleaned = 7.73891e-05 Jy ! Component: 150 - total flux cleaned = 0.000116977 Jy ! Component: 200 - total flux cleaned = 7.95471e-05 Jy ! Total flux subtracted in 200 components = 7.95471e-05 Jy ! Clean residual min=-0.001774 max=0.001796 Jy/beam ! Clean residual mean=0.000001 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.152457 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 93 components and 0.152457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106283Jy sigma=0.091421 ! Fit after self-cal, rms=0.106284Jy sigma=0.091421 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106284Jy sigma=0.091421 ! Fit after self-cal, rms=0.106395Jy sigma=0.091419 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.07 mas, bmaj=3.197 mas, bpa=-18.49 degrees ! Estimated noise=5.23816 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.48566e-05 Jy ! Component: 100 - total flux cleaned = -0.000113004 Jy ! Component: 150 - total flux cleaned = -0.00011254 Jy ! Component: 200 - total flux cleaned = -0.000129922 Jy ! Total flux subtracted in 200 components = -0.000129922 Jy ! Clean residual min=-0.001709 max=0.001763 Jy/beam ! Clean residual mean=0.000001 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.152327 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 98 components and 0.152327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106388Jy sigma=0.091414 ! Fit after self-cal, rms=0.106390Jy sigma=0.091414 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.78131e-06 Jy ! Component: 100 - total flux cleaned = -3.4451e-05 Jy ! Component: 150 - total flux cleaned = -6.47952e-05 Jy ! Component: 200 - total flux cleaned = -9.40298e-05 Jy ! Total flux subtracted in 200 components = -9.40298e-05 Jy ! Clean residual min=-0.001689 max=0.001736 Jy/beam ! Clean residual mean=0.000001 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.152233 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 101 components and 0.152233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106385Jy sigma=0.091411 ! Fit after self-cal, rms=0.106385Jy sigma=0.091411 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106385Jy sigma=0.091411 ! Fit after self-cal, rms=0.106351Jy sigma=0.091409 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.235 mas, bmaj=3.423 mas, bpa=-10.4 degrees ! Estimated noise=5.93965 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00045435 Jy ! Component: 100 - total flux cleaned = -0.000598686 Jy ! Component: 150 - total flux cleaned = -0.000584637 Jy ! Component: 200 - total flux cleaned = -0.000558701 Jy ! Total flux subtracted in 200 components = -0.000558701 Jy ! Clean residual min=-0.001863 max=0.001959 Jy/beam ! Clean residual mean=0.000002 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.151674 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 113 components and 0.151674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106350Jy sigma=0.091409 ! Fit after self-cal, rms=0.106347Jy sigma=0.091408 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110037 Jy ! Component: 100 - total flux cleaned = -0.000111417 Jy ! Component: 150 - total flux cleaned = -9.03447e-05 Jy ! Component: 200 - total flux cleaned = -8.06197e-05 Jy ! Total flux subtracted in 200 components = -8.06197e-05 Jy ! Clean residual min=-0.001849 max=0.001947 Jy/beam ! Clean residual mean=0.000002 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.151594 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 117 components and 0.151594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106347Jy sigma=0.091409 ! Fit after self-cal, rms=0.106346Jy sigma=0.091408 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.07 mas, bmaj=3.199 mas, bpa=-18.48 degrees ! Estimated noise=5.23552 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.07 x 3.199 at -18.48 degrees (North through East) ! Clean map min=-0.0015649 max=0.13707 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8575 mas, bmaj=3.134 mas, bpa=-20.53 degrees ! Estimated noise=11.476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106577 Jy ! Component: 100 - total flux cleaned = 0.129881 Jy ! Component: 150 - total flux cleaned = 0.136908 Jy ! Component: 200 - total flux cleaned = 0.139994 Jy ! Total flux subtracted in 200 components = 0.139994 Jy ! Clean residual min=-0.003836 max=0.003489 Jy/beam ! Clean residual mean=0.000001 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.139994 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.139994 Jy ! Inverting map and beam ! Estimated beam: bmin=1.07 mas, bmaj=3.199 mas, bpa=-18.48 degrees ! Estimated noise=5.23552 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350627 Jy ! Component: 100 - total flux cleaned = 0.00587381 Jy ! Component: 150 - total flux cleaned = 0.00764839 Jy ! Component: 200 - total flux cleaned = 0.00896734 Jy ! Total flux subtracted in 200 components = 0.00896734 Jy ! Clean residual min=-0.002061 max=0.001814 Jy/beam ! Clean residual mean=0.000001 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.148962 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 47 components and 0.148962 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.235 mas, bmaj=3.423 mas, bpa=-10.4 degrees ! Estimated noise=5.93965 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138961 Jy ! Component: 100 - total flux cleaned = 0.00236518 Jy ! Component: 150 - total flux cleaned = 0.00264734 Jy ! Component: 200 - total flux cleaned = 0.00275611 Jy ! Total flux subtracted in 200 components = 0.00275611 Jy ! Clean residual min=-0.002127 max=0.002107 Jy/beam ! Clean residual mean=0.000002 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.151718 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121518 Jy ! Component: 100 - total flux cleaned = 0.000143141 Jy ! Component: 150 - total flux cleaned = 0.000122499 Jy ! Component: 200 - total flux cleaned = 0.000104624 Jy ! Total flux subtracted in 200 components = 0.000104624 Jy ! Clean residual min=-0.002014 max=0.002035 Jy/beam ! Clean residual mean=0.000002 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.151822 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 80 components and 0.151822 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.07 mas, bmaj=3.199 mas, bpa=-18.48 degrees ! Estimated noise=5.23552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000137869 Jy ! Component: 100 - total flux cleaned = -8.41876e-05 Jy ! Component: 150 - total flux cleaned = -0.0001976 Jy ! Component: 200 - total flux cleaned = -0.000197662 Jy ! Total flux subtracted in 200 components = -0.000197662 Jy ! Clean residual min=-0.001742 max=0.001744 Jy/beam ! Clean residual mean=0.000001 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.151625 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 97 components and 0.151625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106366Jy sigma=0.091423 ! Fit after self-cal, rms=0.106362Jy sigma=0.091422 wmodel /scr/pima/rdv94_uvs/J1318+0430_X_map.mod ! Writing 97 model components to file: /scr/pima/rdv94_uvs/J1318+0430_X_map.mod wobs /scr/pima/rdv94_uvs/J1318+0430_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv94_uvs/J1318+0430_X_uvs.fits wwins /scr/pima/rdv94_uvs/J1318+0430_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rdv94_uvs/J1318+0430_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.09439e-05 Jy ! Component: 100 - total flux cleaned = -0.000119536 Jy ! Component: 150 - total flux cleaned = -0.000118997 Jy ! Component: 200 - total flux cleaned = -6.46933e-05 Jy ! Component: 250 - total flux cleaned = 6.32112e-05 Jy ! Component: 300 - total flux cleaned = 6.31365e-05 Jy ! Component: 350 - total flux cleaned = 0.000137059 Jy ! Component: 400 - total flux cleaned = 0.000278926 Jy ! Component: 450 - total flux cleaned = 0.000325237 Jy ! Component: 500 - total flux cleaned = 0.000369983 Jy ! Component: 550 - total flux cleaned = 0.000370294 Jy ! Component: 600 - total flux cleaned = 0.000392147 Jy ! Component: 650 - total flux cleaned = 0.000435055 Jy ! Component: 700 - total flux cleaned = 0.000539273 Jy ! Component: 750 - total flux cleaned = 0.000538804 Jy ! Component: 800 - total flux cleaned = 0.000437792 Jy ! Component: 850 - total flux cleaned = 0.000378137 Jy ! Component: 900 - total flux cleaned = 0.000299961 Jy ! Component: 950 - total flux cleaned = 0.000280827 Jy ! Component: 1000 - total flux cleaned = 0.000185791 Jy ! Component: 1050 - total flux cleaned = 0.000148415 Jy ! Component: 1100 - total flux cleaned = 7.41068e-05 Jy ! Component: 1150 - total flux cleaned = -3.52037e-05 Jy ! Component: 1200 - total flux cleaned = -7.08798e-05 Jy ! Component: 1250 - total flux cleaned = -0.000177034 Jy ! Component: 1300 - total flux cleaned = -0.000246863 Jy ! Component: 1350 - total flux cleaned = -0.000264389 Jy ! Component: 1400 - total flux cleaned = -0.000349806 Jy ! Component: 1450 - total flux cleaned = -0.00034951 Jy ! Component: 1500 - total flux cleaned = -0.000332818 Jy ! Component: 1550 - total flux cleaned = -0.000382182 Jy ! Component: 1600 - total flux cleaned = -0.00039833 Jy ! Component: 1650 - total flux cleaned = -0.000414373 Jy ! Component: 1700 - total flux cleaned = -0.00036631 Jy ! Component: 1750 - total flux cleaned = -0.000398048 Jy ! Component: 1800 - total flux cleaned = -0.000429122 Jy ! Component: 1850 - total flux cleaned = -0.000382814 Jy ! Component: 1900 - total flux cleaned = -0.000382881 Jy ! Component: 1950 - total flux cleaned = -0.000382787 Jy ! Component: 2000 - total flux cleaned = -0.000427912 Jy ! Component: 2050 - total flux cleaned = -0.00041274 Jy ! Component: 2100 - total flux cleaned = -0.00039809 Jy ! Component: 2150 - total flux cleaned = -0.000427339 Jy ! Component: 2200 - total flux cleaned = -0.000442086 Jy ! Component: 2250 - total flux cleaned = -0.000499878 Jy ! Component: 2300 - total flux cleaned = -0.000557125 Jy ! Component: 2350 - total flux cleaned = -0.000571325 Jy ! Component: 2400 - total flux cleaned = -0.000542992 Jy ! Component: 2450 - total flux cleaned = -0.000613145 Jy ! Component: 2500 - total flux cleaned = -0.000599105 Jy ! Component: 2550 - total flux cleaned = -0.000612966 Jy ! Component: 2600 - total flux cleaned = -0.00061312 Jy ! Component: 2650 - total flux cleaned = -0.000626733 Jy ! Component: 2700 - total flux cleaned = -0.000667206 Jy ! Component: 2750 - total flux cleaned = -0.000720607 Jy ! Component: 2800 - total flux cleaned = -0.00072062 Jy ! Component: 2850 - total flux cleaned = -0.000733844 Jy ! Component: 2900 - total flux cleaned = -0.000786459 Jy ! Component: 2950 - total flux cleaned = -0.000812586 Jy ! Component: 3000 - total flux cleaned = -0.000825577 Jy ! Component: 3050 - total flux cleaned = -0.0009027 Jy ! Component: 3100 - total flux cleaned = -0.000902811 Jy ! Component: 3150 - total flux cleaned = -0.000940907 Jy ! Component: 3200 - total flux cleaned = -0.000991622 Jy ! Component: 3250 - total flux cleaned = -0.000991769 Jy ! Component: 3300 - total flux cleaned = -0.000991815 Jy ! Component: 3350 - total flux cleaned = -0.00106621 Jy ! Component: 3400 - total flux cleaned = -0.00110325 Jy ! Component: 3450 - total flux cleaned = -0.00101746 Jy ! Component: 3500 - total flux cleaned = -0.0011029 Jy ! Component: 3550 - total flux cleaned = -0.00107867 Jy ! Component: 3600 - total flux cleaned = -0.00111478 Jy ! Component: 3650 - total flux cleaned = -0.00105476 Jy ! Component: 3700 - total flux cleaned = -0.0010429 Jy ! Component: 3750 - total flux cleaned = -0.0010786 Jy ! Component: 3800 - total flux cleaned = -0.00110217 Jy ! Component: 3850 - total flux cleaned = -0.00107872 Jy ! Component: 3900 - total flux cleaned = -0.00110201 Jy ! Component: 3950 - total flux cleaned = -0.0010671 Jy ! Component: 4000 - total flux cleaned = -0.00107869 Jy ! Component: 4050 - total flux cleaned = -0.00109011 Jy ! Total flux subtracted in 4096 components = -0.00105577 Jy ! Clean residual min=-0.000642 max=0.000695 Jy/beam ! Clean residual mean=0.000000 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.150569 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 374 components and 0.150569 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv94_uvs/J1318+0430_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.07 x 3.199 at -18.48 degrees (North through East) ! Clean map min=-0.0014515 max=0.13694 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J1318+0430_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.136943 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000201694 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.441849 0.441849 0.883698 1.7674 3.53479 7.06958 14.1392 28.2783 56.5567 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.136 quit ! Quitting program ! Log file /scr/pima/rdv94_uvs/J1318+0430_X_uvs.log closed on Mon Sep 23 22:11:39 2013