! Started logfile: /scr/pima/rdv94_uvs/J1318+0430_S_uvs.log on Mon Sep 23 22:11:47 2013
obs /scr/pima/rdv94_uvs/J1318+0430_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv94_uvs/J1318+0430_S_uva.fits
! AN table 1: 179 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.886096 visibilities/baseline/integration-bin.
! Found source: J1318+0430
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09      1.6e+07          1      1.6e+07
!  02        2  2.26693e+09      1.6e+07          1      1.6e+07
!  03        3  2.35693e+09      1.6e+07          1      1.6e+07
!  04        4  2.37693e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 22840 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J1318+0430_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 92 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.026912Jy  sigma=0.876858
! Fit after  self-cal, rms=0.874547Jy  sigma=0.744494
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.271 mas, bmaj=11.53 mas, bpa=-19.45 degrees
! Estimated noise=10.65 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101329 Jy
! Component: 100  -  total flux cleaned = 0.124205 Jy
! Total flux subtracted in 100 components = 0.124205 Jy
! Clean residual min=-0.005557 max=0.008202 Jy/beam
! Clean residual mean=-0.000008 rms=0.001560 Jy/beam
! Combined flux in latest and established models = 0.124205 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.124205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115326Jy  sigma=0.094101
! Fit after  self-cal, rms=0.115286Jy  sigma=0.094056
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.002 mas, bmaj=12.09 mas, bpa=-17.76 degrees
! Estimated noise=5.56686 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112386 Jy
! Component: 100  -  total flux cleaned = 0.0161455 Jy
! Component: 150  -  total flux cleaned = 0.018467 Jy
! Component: 200  -  total flux cleaned = 0.0190264 Jy
! Total flux subtracted in 200 components = 0.0190264 Jy
! Clean residual min=-0.003835 max=0.004621 Jy/beam
! Clean residual mean=-0.000021 rms=0.001077 Jy/beam
! Combined flux in latest and established models = 0.143231 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 26 components and 0.143231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.114411Jy  sigma=0.093123
! Fit after  self-cal, rms=0.114477Jy  sigma=0.093110
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.02     KP        1.03     
!   LA        1.31     MK        0.90     NL        0.99     OV        0.98     
!   PT        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.06     HN        1.04     KP        1.08     
!   LA        1.21     MK        1.00     NL        1.04     OV        1.03     
!   PT        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.07     HN        1.01     KP        0.88     
!   LA        0.96     MK        1.03     NL        1.09     OV        1.03     
!   PT        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.91     HN        0.90     KP        0.85     
!   LA        0.77     MK        1.13     NL        0.97     OV        0.85     
!   PT        1.01     
! 
! 
! Fit before self-cal, rms=0.114477Jy  sigma=0.093110
! Fit after  self-cal, rms=0.111227Jy  sigma=0.090972
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.009 mas, bmaj=12.16 mas, bpa=-17.71 degrees
! Estimated noise=5.55458 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00055949 Jy
! Component: 100  -  total flux cleaned = -0.000820725 Jy
! Component: 150  -  total flux cleaned = -0.000993871 Jy
! Component: 200  -  total flux cleaned = -0.00107355 Jy
! Total flux subtracted in 200 components = -0.00107355 Jy
! Clean residual min=-0.002601 max=0.002605 Jy/beam
! Clean residual mean=-0.000006 rms=0.000654 Jy/beam
! Combined flux in latest and established models = 0.142157 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 36 components and 0.142157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111209Jy  sigma=0.090958
! Fit after  self-cal, rms=0.111343Jy  sigma=0.090920
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111343Jy  sigma=0.090920
! Fit after  self-cal, rms=0.111213Jy  sigma=0.090639
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=12.17 mas, bpa=-17.67 degrees
! Estimated noise=5.5551 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000203735 Jy
! Component: 100  -  total flux cleaned = -0.000414557 Jy
! Component: 150  -  total flux cleaned = -0.000510587 Jy
! Component: 200  -  total flux cleaned = -0.000567295 Jy
! Total flux subtracted in 200 components = -0.000567295 Jy
! Clean residual min=-0.001854 max=0.002204 Jy/beam
! Clean residual mean=-0.000000 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.14159 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 47 components and 0.14159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111206Jy  sigma=0.090635
! Fit after  self-cal, rms=0.111245Jy  sigma=0.090624
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, -58.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00112952 Jy
! Component: 100  -  total flux cleaned = 0.00146152 Jy
! Component: 150  -  total flux cleaned = 0.00136497 Jy
! Component: 200  -  total flux cleaned = 0.001393 Jy
! Total flux subtracted in 200 components = 0.001393 Jy
! Clean residual min=-0.001672 max=0.001747 Jy/beam
! Clean residual mean=-0.000001 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.142983 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 69 components and 0.142983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111208Jy  sigma=0.090588
! Fit after  self-cal, rms=0.111209Jy  sigma=0.090586
! Inverting map 
! Added new window around map position (75, 78.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000135433 Jy
! Component: 100  -  total flux cleaned = 0.000221978 Jy
! Component: 150  -  total flux cleaned = 0.000184649 Jy
! Component: 200  -  total flux cleaned = 0.000155698 Jy
! Total flux subtracted in 200 components = 0.000155698 Jy
! Clean residual min=-0.001386 max=0.001450 Jy/beam
! Clean residual mean=-0.000001 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.143139 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 94 components and 0.143139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111171Jy  sigma=0.090560
! Fit after  self-cal, rms=0.111171Jy  sigma=0.090558
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111171Jy  sigma=0.090558
! Fit after  self-cal, rms=0.111167Jy  sigma=0.090554
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.005 mas, bmaj=12.18 mas, bpa=-17.68 degrees
! Estimated noise=5.5541 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000197802 Jy
! Component: 100  -  total flux cleaned = 0.000228758 Jy
! Component: 150  -  total flux cleaned = 0.000175412 Jy
! Component: 200  -  total flux cleaned = 7.48145e-05 Jy
! Total flux subtracted in 200 components = 7.48145e-05 Jy
! Clean residual min=-0.001362 max=0.001322 Jy/beam
! Clean residual mean=-0.000001 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.143214 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 104 components and 0.143214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111151Jy  sigma=0.090544
! Fit after  self-cal, rms=0.111156Jy  sigma=0.090543
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.05129e-05 Jy
! Component: 100  -  total flux cleaned = -6.59615e-05 Jy
! Component: 150  -  total flux cleaned = -8.75691e-05 Jy
! Component: 200  -  total flux cleaned = -8.77044e-05 Jy
! Total flux subtracted in 200 components = -8.77044e-05 Jy
! Clean residual min=-0.001331 max=0.001306 Jy/beam
! Clean residual mean=-0.000001 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.143126 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 120 components and 0.143126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111146Jy  sigma=0.090538
! Fit after  self-cal, rms=0.111146Jy  sigma=0.090538
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111146Jy  sigma=0.090538
! Fit after  self-cal, rms=0.111180Jy  sigma=0.090536
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.898 mas, bmaj=12.83 mas, bpa=-10.91 degrees
! Estimated noise=6.21882 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000270115 Jy
! Component: 100  -  total flux cleaned = 0.000271059 Jy
! Component: 150  -  total flux cleaned = 0.000254286 Jy
! Component: 200  -  total flux cleaned = 0.000270646 Jy
! Total flux subtracted in 200 components = 0.000270646 Jy
! Clean residual min=-0.001452 max=0.001276 Jy/beam
! Clean residual mean=-0.000001 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.143397 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 150 components and 0.143397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111176Jy  sigma=0.090533
! Fit after  self-cal, rms=0.111177Jy  sigma=0.090533
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.51687e-05 Jy
! Component: 100  -  total flux cleaned = 7.57255e-05 Jy
! Component: 150  -  total flux cleaned = 0.000103999 Jy
! Component: 200  -  total flux cleaned = 0.000117263 Jy
! Total flux subtracted in 200 components = 0.000117263 Jy
! Clean residual min=-0.001457 max=0.001279 Jy/beam
! Clean residual mean=-0.000001 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.143514 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 173 components and 0.143514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111174Jy  sigma=0.090531
! Fit after  self-cal, rms=0.111175Jy  sigma=0.090531
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=12.19 mas, bpa=-17.68 degrees
! Estimated noise=5.55502 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.006 x 12.19 at -17.68 degrees (North through East)
! Clean map  min=-0.0019059  max=0.13385 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.264 mas, bmaj=11.66 mas, bpa=-19.46 degrees
! Estimated noise=10.7314 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101908 Jy
! Component: 100  -  total flux cleaned = 0.125031 Jy
! Component: 150  -  total flux cleaned = 0.134073 Jy
! Component: 200  -  total flux cleaned = 0.138316 Jy
! Total flux subtracted in 200 components = 0.138316 Jy
! Clean residual min=-0.003894 max=0.003850 Jy/beam
! Clean residual mean=-0.000002 rms=0.000978 Jy/beam
! Combined flux in latest and established models = 0.138316 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.138316 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=12.19 mas, bpa=-17.68 degrees
! Estimated noise=5.55502 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00360657 Jy
! Component: 100  -  total flux cleaned = 0.00485809 Jy
! Component: 150  -  total flux cleaned = 0.00514331 Jy
! Component: 200  -  total flux cleaned = 0.00531988 Jy
! Total flux subtracted in 200 components = 0.00531988 Jy
! Clean residual min=-0.001713 max=0.001624 Jy/beam
! Clean residual mean=-0.000001 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.143636 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 42 components and 0.143636 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.898 mas, bmaj=12.83 mas, bpa=-10.91 degrees
! Estimated noise=6.21882 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.10584e-05 Jy
! Component: 100  -  total flux cleaned = 0.000206825 Jy
! Component: 150  -  total flux cleaned = 0.000348727 Jy
! Component: 200  -  total flux cleaned = 0.000316734 Jy
! Total flux subtracted in 200 components = 0.000316734 Jy
! Clean residual min=-0.001702 max=0.001423 Jy/beam
! Clean residual mean=-0.000002 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.143953 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.70486e-05 Jy
! Component: 100  -  total flux cleaned = -0.000141483 Jy
! Component: 150  -  total flux cleaned = -0.000192139 Jy
! Component: 200  -  total flux cleaned = -0.000240478 Jy
! Total flux subtracted in 200 components = -0.000240478 Jy
! Clean residual min=-0.001641 max=0.001349 Jy/beam
! Clean residual mean=-0.000002 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.143712 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 87 components and 0.143712 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=12.19 mas, bpa=-17.68 degrees
! Estimated noise=5.55502 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.92888e-05 Jy
! Component: 100  -  total flux cleaned = 0.000138818 Jy
! Component: 150  -  total flux cleaned = 0.000104368 Jy
! Component: 200  -  total flux cleaned = 1.23148e-05 Jy
! Total flux subtracted in 200 components = 1.23148e-05 Jy
! Clean residual min=-0.001403 max=0.001374 Jy/beam
! Clean residual mean=-0.000001 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.143725 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 110 components and 0.143725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111208Jy  sigma=0.090554
! Fit after  self-cal, rms=0.111197Jy  sigma=0.090553
wmodel /scr/pima/rdv94_uvs/J1318+0430_S_map.mod
! Writing 110 model components to file: /scr/pima/rdv94_uvs/J1318+0430_S_map.mod
wobs /scr/pima/rdv94_uvs/J1318+0430_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv94_uvs/J1318+0430_S_uvs.fits
wwins /scr/pima/rdv94_uvs/J1318+0430_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rdv94_uvs/J1318+0430_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -5.04223e-05 Jy
! Component: 100  -  total flux cleaned = -2.64258e-05 Jy
! Component: 150  -  total flux cleaned = 1.81389e-05 Jy
! Component: 200  -  total flux cleaned = 0.000103044 Jy
! Component: 250  -  total flux cleaned = 0.000267504 Jy
! Component: 300  -  total flux cleaned = 0.000406712 Jy
! Component: 350  -  total flux cleaned = 0.000522496 Jy
! Component: 400  -  total flux cleaned = 0.000597637 Jy
! Component: 450  -  total flux cleaned = 0.000597129 Jy
! Component: 500  -  total flux cleaned = 0.000578979 Jy
! Component: 550  -  total flux cleaned = 0.000508349 Jy
! Component: 600  -  total flux cleaned = 0.000473539 Jy
! Component: 650  -  total flux cleaned = 0.000371466 Jy
! Component: 700  -  total flux cleaned = 0.000337947 Jy
! Component: 750  -  total flux cleaned = 0.000305153 Jy
! Component: 800  -  total flux cleaned = 0.000321007 Jy
! Component: 850  -  total flux cleaned = 0.000289001 Jy
! Component: 900  -  total flux cleaned = 0.000289028 Jy
! Component: 950  -  total flux cleaned = 0.000319901 Jy
! Component: 1000  -  total flux cleaned = 0.000304881 Jy
! Component: 1050  -  total flux cleaned = 0.000305015 Jy
! Component: 1100  -  total flux cleaned = 0.000305088 Jy
! Component: 1150  -  total flux cleaned = 0.000319803 Jy
! Component: 1200  -  total flux cleaned = 0.00037745 Jy
! Component: 1250  -  total flux cleaned = 0.00036332 Jy
! Component: 1300  -  total flux cleaned = 0.000363335 Jy
! Component: 1350  -  total flux cleaned = 0.000307833 Jy
! Component: 1400  -  total flux cleaned = 0.000294224 Jy
! Component: 1450  -  total flux cleaned = 0.000253511 Jy
! Component: 1500  -  total flux cleaned = 0.00023982 Jy
! Component: 1550  -  total flux cleaned = 0.000186472 Jy
! Component: 1600  -  total flux cleaned = 0.000133774 Jy
! Component: 1650  -  total flux cleaned = 5.53962e-05 Jy
! Component: 1700  -  total flux cleaned = 1.67626e-05 Jy
! Component: 1750  -  total flux cleaned = -2.16532e-05 Jy
! Component: 1800  -  total flux cleaned = -7.23869e-05 Jy
! Component: 1850  -  total flux cleaned = -0.000110125 Jy
! Component: 1900  -  total flux cleaned = -0.000159962 Jy
! Component: 1950  -  total flux cleaned = -0.000197078 Jy
! Component: 2000  -  total flux cleaned = -0.000258304 Jy
! Component: 2050  -  total flux cleaned = -0.000270308 Jy
! Component: 2100  -  total flux cleaned = -0.000294634 Jy
! Component: 2150  -  total flux cleaned = -0.000354367 Jy
! Component: 2200  -  total flux cleaned = -0.000354538 Jy
! Component: 2250  -  total flux cleaned = -0.000401635 Jy
! Component: 2300  -  total flux cleaned = -0.000448344 Jy
! Component: 2350  -  total flux cleaned = -0.000448202 Jy
! Component: 2400  -  total flux cleaned = -0.000471241 Jy
! Component: 2450  -  total flux cleaned = -0.000494062 Jy
! Component: 2500  -  total flux cleaned = -0.000527904 Jy
! Component: 2550  -  total flux cleaned = -0.000550337 Jy
! Component: 2600  -  total flux cleaned = -0.000550352 Jy
! Component: 2650  -  total flux cleaned = -0.000616795 Jy
! Component: 2700  -  total flux cleaned = -0.000649634 Jy
! Component: 2750  -  total flux cleaned = -0.000671482 Jy
! Component: 2800  -  total flux cleaned = -0.000725707 Jy
! Component: 2850  -  total flux cleaned = -0.000779416 Jy
! Component: 2900  -  total flux cleaned = -0.000800802 Jy
! Component: 2950  -  total flux cleaned = -0.000853843 Jy
! Component: 3000  -  total flux cleaned = -0.000853715 Jy
! Component: 3050  -  total flux cleaned = -0.000864147 Jy
! Component: 3100  -  total flux cleaned = -0.000947352 Jy
! Component: 3150  -  total flux cleaned = -0.000947337 Jy
! Component: 3200  -  total flux cleaned = -0.000988377 Jy
! Component: 3250  -  total flux cleaned = -0.00100881 Jy
! Component: 3300  -  total flux cleaned = -0.00106944 Jy
! Component: 3350  -  total flux cleaned = -0.0010694 Jy
! Component: 3400  -  total flux cleaned = -0.00107945 Jy
! Component: 3450  -  total flux cleaned = -0.00111927 Jy
! Component: 3500  -  total flux cleaned = -0.00113899 Jy
! Component: 3550  -  total flux cleaned = -0.00113898 Jy
! Component: 3600  -  total flux cleaned = -0.00116821 Jy
! Component: 3650  -  total flux cleaned = -0.00116818 Jy
! Component: 3700  -  total flux cleaned = -0.00118746 Jy
! Component: 3750  -  total flux cleaned = -0.00120664 Jy
! Component: 3800  -  total flux cleaned = -0.0012162 Jy
! Component: 3850  -  total flux cleaned = -0.00119714 Jy
! Component: 3900  -  total flux cleaned = -0.00120665 Jy
! Component: 3950  -  total flux cleaned = -0.00122554 Jy
! Component: 4000  -  total flux cleaned = -0.00120681 Jy
! Component: 4050  -  total flux cleaned = -0.00122548 Jy
! Total flux subtracted in 4096 components = -0.00121625 Jy
! Clean residual min=-0.000526 max=0.000556 Jy/beam
! Clean residual mean=0.000000 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.142508 Jy
keep
! Adding 275 model components to the UV plane model.
! The established model now contains 385 components and 0.142508 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rdv94_uvs/J1318+0430_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.006 x 12.19 at -17.68 degrees (North through East)
! Clean map  min=-0.0016792  max=0.13344 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J1318+0430_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.133443 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000180299 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.405339 0.405339 0.810679 1.62136 3.24272 6.48543 12.9709 25.9417 51.8835
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.133 
quit
! Quitting program
! Log file /scr/pima/rdv94_uvs/J1318+0430_S_uvs.log closed on Mon Sep 23 22:11:53 2013