! Started logfile: /scr/pima/rdv94_uvs/J1133-0905_X_uvs.log on Mon Sep 23 22:10:50 2013 obs /scr/pima/rdv94_uvs/J1133-0905_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv94_uvs/J1133-0905_X_uva.fits ! AN table 1: 179 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.877405 visibilities/baseline/integration-bin. ! Found source: J1133-0905 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47993e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79493e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89993e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 22616 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J1133-0905_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.024251Jy sigma=1.057752 ! Fit after self-cal, rms=0.851483Jy sigma=0.874973 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8135 mas, bmaj=3.205 mas, bpa=-20.35 degrees ! Estimated noise=12.064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119172 Jy ! Component: 100 - total flux cleaned = 0.14592 Jy ! Total flux subtracted in 100 components = 0.14592 Jy ! Clean residual min=-0.006538 max=0.009283 Jy/beam ! Clean residual mean=0.000001 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.14592 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.14592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108879Jy sigma=0.107665 ! Fit after self-cal, rms=0.108889Jy sigma=0.107651 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=3.514 mas, bpa=-18.21 degrees ! Estimated noise=4.63074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011703 Jy ! Component: 100 - total flux cleaned = 0.0175311 Jy ! Component: 150 - total flux cleaned = 0.0210874 Jy ! Component: 200 - total flux cleaned = 0.0233625 Jy ! Total flux subtracted in 200 components = 0.0233625 Jy ! Clean residual min=-0.003031 max=0.004228 Jy/beam ! Clean residual mean=-0.000005 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.169282 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 44 components and 0.169282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107799Jy sigma=0.106207 ! Fit after self-cal, rms=0.107863Jy sigma=0.106190 ! Inverting map ! Added new window around map position (-2, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382728 Jy ! Component: 100 - total flux cleaned = 0.00517051 Jy ! Component: 150 - total flux cleaned = 0.00617057 Jy ! Component: 200 - total flux cleaned = 0.00640609 Jy ! Total flux subtracted in 200 components = 0.00640609 Jy ! Clean residual min=-0.002737 max=0.002730 Jy/beam ! Clean residual mean=-0.000004 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.175688 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.175688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107717Jy sigma=0.106031 ! Fit after self-cal, rms=0.107722Jy sigma=0.106018 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 0.94 KP 1.04 ! LA 1.01 MK 0.99 NL 0.95 OV 0.99 ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 0.98 HN 0.97 KP 0.99 ! LA 1.01 MK 1.01 NL 0.98 OV 1.00 ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.00 KP 0.89 ! LA 1.03 MK 0.97 NL 1.00 OV 1.04 ! PT 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 0.96 KP 0.96 ! LA 1.03 MK 1.05 NL 1.04 OV 1.01 ! PT 1.00 ! ! ! Fit before self-cal, rms=0.107722Jy sigma=0.106018 ! Fit after self-cal, rms=0.106568Jy sigma=0.105465 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9986 mas, bmaj=3.524 mas, bpa=-18.14 degrees ! Estimated noise=4.60935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504805 Jy ! Component: 100 - total flux cleaned = 0.00050657 Jy ! Component: 150 - total flux cleaned = 0.000542057 Jy ! Component: 200 - total flux cleaned = 0.000636169 Jy ! Total flux subtracted in 200 components = 0.000636169 Jy ! Clean residual min=-0.001953 max=0.001991 Jy/beam ! Clean residual mean=-0.000002 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.176325 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 84 components and 0.176325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106535Jy sigma=0.105436 ! Fit after self-cal, rms=0.106571Jy sigma=0.105419 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106571Jy sigma=0.105419 ! Fit after self-cal, rms=0.106586Jy sigma=0.105379 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9984 mas, bmaj=3.526 mas, bpa=-18.14 degrees ! Estimated noise=4.61225 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000512673 Jy ! Component: 100 - total flux cleaned = 0.000571373 Jy ! Component: 150 - total flux cleaned = 0.000570128 Jy ! Component: 200 - total flux cleaned = 0.000645727 Jy ! Total flux subtracted in 200 components = 0.000645727 Jy ! Clean residual min=-0.001812 max=0.001830 Jy/beam ! Clean residual mean=-0.000002 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.17697 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 99 components and 0.17697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106567Jy sigma=0.105365 ! Fit after self-cal, rms=0.106576Jy sigma=0.105364 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.5286e-06 Jy ! Component: 100 - total flux cleaned = 7.50171e-05 Jy ! Component: 150 - total flux cleaned = 0.000162653 Jy ! Component: 200 - total flux cleaned = 0.000246225 Jy ! Total flux subtracted in 200 components = 0.000246225 Jy ! Clean residual min=-0.001805 max=0.001831 Jy/beam ! Clean residual mean=-0.000002 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.177217 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 106 components and 0.177217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106565Jy sigma=0.105356 ! Fit after self-cal, rms=0.106568Jy sigma=0.105356 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106568Jy sigma=0.105356 ! Fit after self-cal, rms=0.106553Jy sigma=0.105354 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9981 mas, bmaj=3.53 mas, bpa=-18.12 degrees ! Estimated noise=4.61304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208018 Jy ! Component: 100 - total flux cleaned = 0.000271684 Jy ! Component: 150 - total flux cleaned = 0.000311299 Jy ! Component: 200 - total flux cleaned = 0.000367276 Jy ! Total flux subtracted in 200 components = 0.000367276 Jy ! Clean residual min=-0.001779 max=0.001832 Jy/beam ! Clean residual mean=-0.000002 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.177584 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 111 components and 0.177584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106543Jy sigma=0.105347 ! Fit after self-cal, rms=0.106547Jy sigma=0.105347 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.58482e-05 Jy ! Component: 100 - total flux cleaned = 0.000128459 Jy ! Component: 150 - total flux cleaned = 0.000195175 Jy ! Component: 200 - total flux cleaned = 0.000227526 Jy ! Total flux subtracted in 200 components = 0.000227526 Jy ! Clean residual min=-0.001789 max=0.001831 Jy/beam ! Clean residual mean=-0.000002 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.177811 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 112 components and 0.177811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106541Jy sigma=0.105343 ! Fit after self-cal, rms=0.106543Jy sigma=0.105343 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106543Jy sigma=0.105343 ! Fit after self-cal, rms=0.106494Jy sigma=0.105342 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.195 mas, bmaj=4.137 mas, bpa=-7.915 degrees ! Estimated noise=5.22667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000605846 Jy ! Component: 100 - total flux cleaned = 0.00099412 Jy ! Component: 150 - total flux cleaned = 0.001154 Jy ! Component: 200 - total flux cleaned = 0.00123212 Jy ! Total flux subtracted in 200 components = 0.00123212 Jy ! Clean residual min=-0.002242 max=0.001932 Jy/beam ! Clean residual mean=-0.000002 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.179044 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 121 components and 0.179044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106494Jy sigma=0.105341 ! Fit after self-cal, rms=0.106495Jy sigma=0.105340 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229071 Jy ! Component: 100 - total flux cleaned = 0.000275051 Jy ! Component: 150 - total flux cleaned = 0.000308482 Jy ! Component: 200 - total flux cleaned = 0.000331652 Jy ! Total flux subtracted in 200 components = 0.000331652 Jy ! Clean residual min=-0.002211 max=0.001931 Jy/beam ! Clean residual mean=-0.000002 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.179375 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 129 components and 0.179375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106495Jy sigma=0.105340 ! Fit after self-cal, rms=0.106495Jy sigma=0.105340 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9975 mas, bmaj=3.534 mas, bpa=-18.1 degrees ! Estimated noise=4.61255 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9975 x 3.534 at -18.1 degrees (North through East) ! Clean map min=-0.0017142 max=0.15509 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8145 mas, bmaj=3.216 mas, bpa=-20.18 degrees ! Estimated noise=11.9799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118134 Jy ! Component: 100 - total flux cleaned = 0.144728 Jy ! Component: 150 - total flux cleaned = 0.155029 Jy ! Component: 200 - total flux cleaned = 0.161365 Jy ! Total flux subtracted in 200 components = 0.161365 Jy ! Clean residual min=-0.005295 max=0.006148 Jy/beam ! Clean residual mean=0.000001 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.161364 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.161364 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9975 mas, bmaj=3.534 mas, bpa=-18.1 degrees ! Estimated noise=4.61255 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00624784 Jy ! Component: 100 - total flux cleaned = 0.00960196 Jy ! Component: 150 - total flux cleaned = 0.0118409 Jy ! Component: 200 - total flux cleaned = 0.0129775 Jy ! Total flux subtracted in 200 components = 0.0129775 Jy ! Clean residual min=-0.001863 max=0.001951 Jy/beam ! Clean residual mean=-0.000002 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.174342 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 44 components and 0.174342 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.195 mas, bmaj=4.137 mas, bpa=-7.915 degrees ! Estimated noise=5.22667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173586 Jy ! Component: 100 - total flux cleaned = 0.00250589 Jy ! Component: 150 - total flux cleaned = 0.00296222 Jy ! Component: 200 - total flux cleaned = 0.0032711 Jy ! Total flux subtracted in 200 components = 0.0032711 Jy ! Clean residual min=-0.002263 max=0.002013 Jy/beam ! Clean residual mean=-0.000003 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.177613 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000231627 Jy ! Component: 100 - total flux cleaned = 0.000477488 Jy ! Component: 150 - total flux cleaned = 0.000691542 Jy ! Component: 200 - total flux cleaned = 0.000880981 Jy ! Total flux subtracted in 200 components = 0.000880981 Jy ! Clean residual min=-0.002232 max=0.001942 Jy/beam ! Clean residual mean=-0.000002 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.178494 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 83 components and 0.178494 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9975 mas, bmaj=3.534 mas, bpa=-18.1 degrees ! Estimated noise=4.61255 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288389 Jy ! Component: 100 - total flux cleaned = 0.000255618 Jy ! Component: 150 - total flux cleaned = 0.000255468 Jy ! Component: 200 - total flux cleaned = 0.00023038 Jy ! Total flux subtracted in 200 components = 0.00023038 Jy ! Clean residual min=-0.001800 max=0.001825 Jy/beam ! Clean residual mean=-0.000001 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.178724 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 105 components and 0.178724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106505Jy sigma=0.105348 ! Fit after self-cal, rms=0.106504Jy sigma=0.105346 wmodel /scr/pima/rdv94_uvs/J1133-0905_X_map.mod ! Writing 105 model components to file: /scr/pima/rdv94_uvs/J1133-0905_X_map.mod wobs /scr/pima/rdv94_uvs/J1133-0905_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv94_uvs/J1133-0905_X_uvs.fits wwins /scr/pima/rdv94_uvs/J1133-0905_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rdv94_uvs/J1133-0905_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109209 Jy ! Component: 100 - total flux cleaned = 0.000324649 Jy ! Component: 150 - total flux cleaned = 0.000528878 Jy ! Component: 200 - total flux cleaned = 0.000753451 Jy ! Component: 250 - total flux cleaned = 0.00099547 Jy ! Component: 300 - total flux cleaned = 0.00120327 Jy ! Component: 350 - total flux cleaned = 0.00137929 Jy ! Component: 400 - total flux cleaned = 0.00150146 Jy ! Component: 450 - total flux cleaned = 0.00154905 Jy ! Component: 500 - total flux cleaned = 0.00161918 Jy ! Component: 550 - total flux cleaned = 0.00168695 Jy ! Component: 600 - total flux cleaned = 0.00173099 Jy ! Component: 650 - total flux cleaned = 0.00179558 Jy ! Component: 700 - total flux cleaned = 0.00181645 Jy ! Component: 750 - total flux cleaned = 0.00179604 Jy ! Component: 800 - total flux cleaned = 0.00185724 Jy ! Component: 850 - total flux cleaned = 0.00185711 Jy ! Component: 900 - total flux cleaned = 0.00183746 Jy ! Component: 950 - total flux cleaned = 0.00185682 Jy ! Component: 1000 - total flux cleaned = 0.00191469 Jy ! Component: 1050 - total flux cleaned = 0.00193374 Jy ! Component: 1100 - total flux cleaned = 0.00200812 Jy ! Component: 1150 - total flux cleaned = 0.00213645 Jy ! Component: 1200 - total flux cleaned = 0.00213644 Jy ! Component: 1250 - total flux cleaned = 0.00219031 Jy ! Component: 1300 - total flux cleaned = 0.00224328 Jy ! Component: 1350 - total flux cleaned = 0.00231263 Jy ! Component: 1400 - total flux cleaned = 0.00232983 Jy ! Component: 1450 - total flux cleaned = 0.00236393 Jy ! Component: 1500 - total flux cleaned = 0.00234692 Jy ! Component: 1550 - total flux cleaned = 0.00239684 Jy ! Component: 1600 - total flux cleaned = 0.00239694 Jy ! Component: 1650 - total flux cleaned = 0.00244544 Jy ! Component: 1700 - total flux cleaned = 0.00250989 Jy ! Component: 1750 - total flux cleaned = 0.00254174 Jy ! Component: 1800 - total flux cleaned = 0.00258903 Jy ! Component: 1850 - total flux cleaned = 0.00265172 Jy ! Component: 1900 - total flux cleaned = 0.00276014 Jy ! Component: 1950 - total flux cleaned = 0.00280631 Jy ! Component: 2000 - total flux cleaned = 0.00283671 Jy ! Component: 2050 - total flux cleaned = 0.00292682 Jy ! Component: 2100 - total flux cleaned = 0.00300119 Jy ! Component: 2150 - total flux cleaned = 0.00306026 Jy ! Component: 2200 - total flux cleaned = 0.00308949 Jy ! Component: 2250 - total flux cleaned = 0.00310406 Jy ! Component: 2300 - total flux cleaned = 0.00324831 Jy ! Component: 2350 - total flux cleaned = 0.00334817 Jy ! Component: 2400 - total flux cleaned = 0.00336224 Jy ! Component: 2450 - total flux cleaned = 0.00348878 Jy ! Component: 2500 - total flux cleaned = 0.00355841 Jy ! Component: 2550 - total flux cleaned = 0.00365509 Jy ! Component: 2600 - total flux cleaned = 0.00369639 Jy ! Component: 2650 - total flux cleaned = 0.00381887 Jy ! Component: 2700 - total flux cleaned = 0.00384584 Jy ! Component: 2750 - total flux cleaned = 0.00393968 Jy ! Component: 2800 - total flux cleaned = 0.00397979 Jy ! Component: 2850 - total flux cleaned = 0.00407246 Jy ! Component: 2900 - total flux cleaned = 0.00412496 Jy ! Component: 2950 - total flux cleaned = 0.00421612 Jy ! Component: 3000 - total flux cleaned = 0.00430639 Jy ! Component: 3050 - total flux cleaned = 0.00437057 Jy ! Component: 3100 - total flux cleaned = 0.0044214 Jy ! Component: 3150 - total flux cleaned = 0.00448464 Jy ! Component: 3200 - total flux cleaned = 0.00455988 Jy ! Component: 3250 - total flux cleaned = 0.00468449 Jy ! Component: 3300 - total flux cleaned = 0.00472167 Jy ! Component: 3350 - total flux cleaned = 0.00483221 Jy ! Component: 3400 - total flux cleaned = 0.00490528 Jy ! Component: 3450 - total flux cleaned = 0.00496578 Jy ! Component: 3500 - total flux cleaned = 0.00503787 Jy ! Component: 3550 - total flux cleaned = 0.00506178 Jy ! Component: 3600 - total flux cleaned = 0.00513304 Jy ! Component: 3650 - total flux cleaned = 0.00521565 Jy ! Component: 3700 - total flux cleaned = 0.00528584 Jy ! Component: 3750 - total flux cleaned = 0.00534393 Jy ! Component: 3800 - total flux cleaned = 0.00542481 Jy ! Component: 3850 - total flux cleaned = 0.00544782 Jy ! Component: 3900 - total flux cleaned = 0.00550473 Jy ! Component: 3950 - total flux cleaned = 0.00553889 Jy ! Component: 4000 - total flux cleaned = 0.00561792 Jy ! Component: 4050 - total flux cleaned = 0.00568514 Jy ! Total flux subtracted in 4096 components = 0.00576308 Jy ! Clean residual min=-0.000566 max=0.000630 Jy/beam ! Clean residual mean=-0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.184487 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 407 components and 0.184488 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv94_uvs/J1133-0905_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9975 x 3.534 at -18.1 degrees (North through East) ! Clean map min=-0.0013095 max=0.15523 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J1133-0905_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.155226 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000194029 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.374992 0.374992 0.749985 1.49997 2.99994 5.99988 11.9998 23.9995 47.999 95.998 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.155 quit ! Quitting program ! Log file /scr/pima/rdv94_uvs/J1133-0905_X_uvs.log closed on Mon Sep 23 22:10:57 2013