! Started logfile: /scr/pima/rdv94_uvs/J0856-1105_S_uvs.log on Mon Sep 23 22:10:20 2013
obs /scr/pima/rdv94_uvs/J0856-1105_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv94_uvs/J0856-1105_S_uva.fits
! AN table 1: 43 integrations on 45 of 45 possible baselines.
! AN table 2: 19 integrations on 1 of 1 possible baselines.
! AN table 3: 338 integrations on 3 of 3 possible baselines.
! AN table 4: 40 integrations on 10 of 10 possible baselines.
! AN table 5: 124 integrations on 15 of 15 possible baselines.
! AN table 6: 49 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.488363 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0856-1105
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09      1.6e+07          1      1.6e+07
!  02        2  2.26693e+09      1.6e+07          1      1.6e+07
!  03        3  2.35693e+09      1.6e+07          1      1.6e+07
!  04        4  2.37693e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 14520 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J0856-1105_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 147 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
!  A total of 1014 telescope corrections were flagged in sub-array 3.
!  A total of 200 telescope corrections were flagged in sub-array 4.
!  A total of 744 telescope corrections were flagged in sub-array 5.
!  A total of 385 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 2.
!  A total of 147 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
!  A total of 1014 telescope corrections were flagged in sub-array 3.
!  A total of 200 telescope corrections were flagged in sub-array 4.
!  A total of 744 telescope corrections were flagged in sub-array 5.
!  A total of 385 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 3.
!  A total of 147 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
!  A total of 1014 telescope corrections were flagged in sub-array 3.
!  A total of 200 telescope corrections were flagged in sub-array 4.
!  A total of 744 telescope corrections were flagged in sub-array 5.
!  A total of 385 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 4.
!  A total of 147 telescope corrections were flagged in sub-array 1.
!  A total of 38 telescope corrections were flagged in sub-array 2.
!  A total of 1014 telescope corrections were flagged in sub-array 3.
!  A total of 200 telescope corrections were flagged in sub-array 4.
!  A total of 744 telescope corrections were flagged in sub-array 5.
!  A total of 385 telescope corrections were flagged in sub-array 6.
! 
! Fit before self-cal, rms=1.146602Jy  sigma=3.596454
! Fit after  self-cal, rms=0.550398Jy  sigma=1.693889
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.101 mas, bmaj=12.95 mas, bpa=-16.93 degrees
! Estimated noise=4.21047 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.358296 Jy
! Component: 100  -  total flux cleaned = 0.436989 Jy
! Total flux subtracted in 100 components = 0.436989 Jy
! Clean residual min=-0.013092 max=0.024811 Jy/beam
! Clean residual mean=0.000044 rms=0.003734 Jy/beam
! Combined flux in latest and established models = 0.436989 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.436989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141828Jy  sigma=0.428416
! Fit after  self-cal, rms=0.141830Jy  sigma=0.428384
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0249424 Jy
! Component: 100  -  total flux cleaned = 0.0377339 Jy
! Total flux subtracted in 100 components = 0.0377339 Jy
! Clean residual min=-0.011260 max=0.011511 Jy/beam
! Clean residual mean=0.000023 rms=0.003143 Jy/beam
! Combined flux in latest and established models = 0.474723 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 24 components and 0.474723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136412Jy  sigma=0.407623
! Fit after  self-cal, rms=0.136412Jy  sigma=0.407553
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.951 mas, bmaj=13.82 mas, bpa=-16.5 degrees
! Estimated noise=3.37752 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128765 Jy
! Component: 100  -  total flux cleaned = 0.0201047 Jy
! Component: 150  -  total flux cleaned = 0.0245445 Jy
! Component: 200  -  total flux cleaned = 0.0273424 Jy
! Total flux subtracted in 200 components = 0.0273424 Jy
! Clean residual min=-0.009323 max=0.009842 Jy/beam
! Clean residual mean=0.000012 rms=0.002666 Jy/beam
! Combined flux in latest and established models = 0.502066 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 52 components and 0.502066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135326Jy  sigma=0.402979
! Fit after  self-cal, rms=0.135330Jy  sigma=0.402945
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.97     KP        1.05     
!   LA        1.31     MK        0.95     NL        0.99     OV        0.98     
!   PT        1.07     WF        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HH        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   HH        0.00*    ON        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   HH        0.00*    HN        0.00*    ON        0.00*    WF        0.00*    
!   WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   HH        0.00*    HN        0.00*    NL        0.00*    ON        0.00*    
!   WF        0.00*    WZ        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.01     HH        1.00*    HN        1.06     KP        1.01     
!   LA        1.25     NL        0.94     ON        1.00*    OV        0.98     
!   WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        1.05     KP        1.03     
!   LA        1.22     MK        1.01     NL        1.03     OV        1.02     
!   PT        1.08     WF        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HH        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   HH        0.00*    ON        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   HH        0.00*    HN        0.00*    ON        0.00*    WF        0.00*    
!   WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   HH        0.00*    HN        0.00*    NL        0.00*    ON        0.00*    
!   WF        0.00*    WZ        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.01     HH        1.00*    HN        1.07     KP        1.03     
!   LA        1.17     NL        1.00     ON        1.00*    OV        1.05     
!   WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.07     HN        1.04     KP        0.91     
!   LA        0.94     MK        1.02     NL        1.06     OV        1.01     
!   PT        1.10     WF        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HH        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   HH        0.00*    ON        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   HH        0.00*    HN        0.00*    ON        0.00*    WF        0.00*    
!   WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   HH        0.00*    HN        0.00*    NL        0.00*    ON        0.00*    
!   WF        0.00*    WZ        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        1.02     HH        1.00*    HN        1.02     KP        0.89     
!   LA        0.92     NL        1.06     ON        1.00*    OV        1.02     
!   WF        1.00*    WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.90     KP        0.85     
!   LA        0.78     MK        1.10     NL        1.03     OV        0.86     
!   PT        0.97     WF        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HH        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   HH        0.00*    ON        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   HH        0.00*    HN        0.00*    ON        0.00*    WF        0.00*    
!   WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   HH        0.00*    HN        0.00*    NL        0.00*    ON        0.00*    
!   WF        0.00*    WZ        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 6.
!  Telescope amplitude corrections in sub-array 6:
!   FD        0.97     HH        1.00*    HN        0.91     KP        0.82     
!   LA        0.78     NL        0.96     ON        1.00*    OV        0.86     
!   WF        1.00*    WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.135330Jy  sigma=0.402945
! Fit after  self-cal, rms=0.111927Jy  sigma=0.328998
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.983 mas, bmaj=13.9 mas, bpa=-15.97 degrees
! Estimated noise=3.41695 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00160165 Jy
! Component: 100  -  total flux cleaned = -0.00203447 Jy
! Component: 150  -  total flux cleaned = -0.00232394 Jy
! Component: 200  -  total flux cleaned = -0.00248789 Jy
! Total flux subtracted in 200 components = -0.00248789 Jy
! Clean residual min=-0.006066 max=0.005877 Jy/beam
! Clean residual mean=-0.000015 rms=0.001384 Jy/beam
! Combined flux in latest and established models = 0.499578 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 71 components and 0.499578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111842Jy  sigma=0.328916
! Fit after  self-cal, rms=0.111974Jy  sigma=0.328762
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111974Jy  sigma=0.328762
! Fit after  self-cal, rms=0.111398Jy  sigma=0.322699
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.98 mas, bmaj=13.92 mas, bpa=-16.01 degrees
! Estimated noise=3.41675 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000301885 Jy
! Component: 100  -  total flux cleaned = -0.000699227 Jy
! Component: 150  -  total flux cleaned = -0.000882889 Jy
! Component: 200  -  total flux cleaned = -0.000947239 Jy
! Total flux subtracted in 200 components = -0.000947239 Jy
! Clean residual min=-0.004766 max=0.004344 Jy/beam
! Clean residual mean=-0.000007 rms=0.001046 Jy/beam
! Combined flux in latest and established models = 0.498631 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 76 components and 0.498631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111361Jy  sigma=0.322622
! Fit after  self-cal, rms=0.111394Jy  sigma=0.322598
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.07238e-05 Jy
! Component: 100  -  total flux cleaned = -3.16206e-05 Jy
! Component: 150  -  total flux cleaned = -5.72989e-05 Jy
! Component: 200  -  total flux cleaned = -3.3542e-05 Jy
! Total flux subtracted in 200 components = -3.3542e-05 Jy
! Clean residual min=-0.004756 max=0.004332 Jy/beam
! Clean residual mean=-0.000007 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.498597 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 86 components and 0.498597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111378Jy  sigma=0.322567
! Fit after  self-cal, rms=0.111376Jy  sigma=0.322561
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111376Jy  sigma=0.322561
! Fit after  self-cal, rms=0.111338Jy  sigma=0.322540
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.981 mas, bmaj=13.94 mas, bpa=-16.02 degrees
! Estimated noise=3.41513 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00032225 Jy
! Component: 100  -  total flux cleaned = -0.000579084 Jy
! Component: 150  -  total flux cleaned = -0.000769125 Jy
! Component: 200  -  total flux cleaned = -0.000816662 Jy
! Total flux subtracted in 200 components = -0.000816662 Jy
! Clean residual min=-0.004723 max=0.004368 Jy/beam
! Clean residual mean=-0.000008 rms=0.001034 Jy/beam
! Combined flux in latest and established models = 0.497781 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 91 components and 0.497781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111319Jy  sigma=0.322500
! Fit after  self-cal, rms=0.111321Jy  sigma=0.322496
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.27258e-05 Jy
! Component: 100  -  total flux cleaned = -4.76567e-05 Jy
! Component: 150  -  total flux cleaned = -4.75694e-05 Jy
! Component: 200  -  total flux cleaned = -2.86735e-05 Jy
! Total flux subtracted in 200 components = -2.86735e-05 Jy
! Clean residual min=-0.004727 max=0.004360 Jy/beam
! Clean residual mean=-0.000008 rms=0.001031 Jy/beam
! Combined flux in latest and established models = 0.497752 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 97 components and 0.497752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111311Jy  sigma=0.322474
! Fit after  self-cal, rms=0.111311Jy  sigma=0.322471
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111311Jy  sigma=0.322471
! Fit after  self-cal, rms=0.111263Jy  sigma=0.322459
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.046 mas, bmaj=15.61 mas, bpa=-7.376 degrees
! Estimated noise=3.84682 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000298574 Jy
! Component: 100  -  total flux cleaned = -0.000326948 Jy
! Component: 150  -  total flux cleaned = -0.000326356 Jy
! Component: 200  -  total flux cleaned = -0.000324728 Jy
! Total flux subtracted in 200 components = -0.000324728 Jy
! Clean residual min=-0.004439 max=0.004446 Jy/beam
! Clean residual mean=-0.000016 rms=0.001128 Jy/beam
! Combined flux in latest and established models = 0.497427 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 104 components and 0.497427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111255Jy  sigma=0.322435
! Fit after  self-cal, rms=0.111254Jy  sigma=0.322432
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.35467e-05 Jy
! Component: 100  -  total flux cleaned = 2.28802e-05 Jy
! Component: 150  -  total flux cleaned = 2.21787e-05 Jy
! Component: 200  -  total flux cleaned = -4.86045e-07 Jy
! Total flux subtracted in 200 components = -4.86045e-07 Jy
! Clean residual min=-0.004476 max=0.004436 Jy/beam
! Clean residual mean=-0.000016 rms=0.001123 Jy/beam
! Combined flux in latest and established models = 0.497427 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 106 components and 0.497427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111253Jy  sigma=0.322428
! Fit after  self-cal, rms=0.111251Jy  sigma=0.322426
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.982 mas, bmaj=13.95 mas, bpa=-16.02 degrees
! Estimated noise=3.41339 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.982 x 13.95 at -16.02 degrees (North through East)
! Clean map  min=-0.0045911  max=0.46327 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.112 mas, bmaj=13.06 mas, bpa=-16.6 degrees
! Estimated noise=4.27214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.357919 Jy
! Component: 100  -  total flux cleaned = 0.43659 Jy
! Component: 150  -  total flux cleaned = 0.461303 Jy
! Component: 200  -  total flux cleaned = 0.472373 Jy
! Total flux subtracted in 200 components = 0.472373 Jy
! Clean residual min=-0.007767 max=0.005712 Jy/beam
! Clean residual mean=0.000012 rms=0.001469 Jy/beam
! Combined flux in latest and established models = 0.472373 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.472373 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.982 mas, bmaj=13.95 mas, bpa=-16.02 degrees
! Estimated noise=3.41339 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0097843 Jy
! Component: 100  -  total flux cleaned = 0.0154245 Jy
! Component: 150  -  total flux cleaned = 0.0190664 Jy
! Component: 200  -  total flux cleaned = 0.0214776 Jy
! Total flux subtracted in 200 components = 0.0214776 Jy
! Clean residual min=-0.004884 max=0.004302 Jy/beam
! Clean residual mean=-0.000004 rms=0.001036 Jy/beam
! Combined flux in latest and established models = 0.493851 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 64 components and 0.493851 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.046 mas, bmaj=15.61 mas, bpa=-7.376 degrees
! Estimated noise=3.84682 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00222409 Jy
! Component: 100  -  total flux cleaned = 0.00308083 Jy
! Component: 150  -  total flux cleaned = 0.00337353 Jy
! Component: 200  -  total flux cleaned = 0.00356638 Jy
! Total flux subtracted in 200 components = 0.00356638 Jy
! Clean residual min=-0.004593 max=0.004319 Jy/beam
! Clean residual mean=-0.000016 rms=0.001112 Jy/beam
! Combined flux in latest and established models = 0.497417 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000147913 Jy
! Component: 100  -  total flux cleaned = 0.000246963 Jy
! Component: 150  -  total flux cleaned = 0.000301415 Jy
! Component: 200  -  total flux cleaned = 0.000326097 Jy
! Total flux subtracted in 200 components = 0.000326097 Jy
! Clean residual min=-0.004581 max=0.004337 Jy/beam
! Clean residual mean=-0.000017 rms=0.001109 Jy/beam
! Combined flux in latest and established models = 0.497743 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 90 components and 0.497743 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.982 mas, bmaj=13.95 mas, bpa=-16.02 degrees
! Estimated noise=3.41339 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000366366 Jy
! Component: 100  -  total flux cleaned = -0.00046299 Jy
! Component: 150  -  total flux cleaned = -0.000544648 Jy
! Component: 200  -  total flux cleaned = -0.000520816 Jy
! Total flux subtracted in 200 components = -0.000520816 Jy
! Clean residual min=-0.004809 max=0.004431 Jy/beam
! Clean residual mean=-0.000009 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 0.497223 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 103 components and 0.497223 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111230Jy  sigma=0.322373
! Fit after  self-cal, rms=0.111223Jy  sigma=0.322346
wmodel /scr/pima/rdv94_uvs/J0856-1105_S_map.mod
! Writing 103 model components to file: /scr/pima/rdv94_uvs/J0856-1105_S_map.mod
wobs /scr/pima/rdv94_uvs/J0856-1105_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv94_uvs/J0856-1105_S_uvs.fits
wwins /scr/pima/rdv94_uvs/J0856-1105_S_map.win
! wwins: Wrote 1 windows to /scr/pima/rdv94_uvs/J0856-1105_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000938858 Jy
! Component: 100  -  total flux cleaned = -0.000945161 Jy
! Component: 150  -  total flux cleaned = -0.000812843 Jy
! Component: 200  -  total flux cleaned = -0.000566636 Jy
! Component: 250  -  total flux cleaned = -0.000566353 Jy
! Component: 300  -  total flux cleaned = -0.000509164 Jy
! Component: 350  -  total flux cleaned = -0.000509511 Jy
! Component: 400  -  total flux cleaned = -0.00056291 Jy
! Component: 450  -  total flux cleaned = -0.000666868 Jy
! Component: 500  -  total flux cleaned = -0.000565807 Jy
! Component: 550  -  total flux cleaned = -0.000715241 Jy
! Component: 600  -  total flux cleaned = -0.000764283 Jy
! Component: 650  -  total flux cleaned = -0.000812505 Jy
! Component: 700  -  total flux cleaned = -0.000953526 Jy
! Component: 750  -  total flux cleaned = -0.00109159 Jy
! Component: 800  -  total flux cleaned = -0.00113642 Jy
! Component: 850  -  total flux cleaned = -0.0012256 Jy
! Component: 900  -  total flux cleaned = -0.0013995 Jy
! Component: 950  -  total flux cleaned = -0.00135656 Jy
! Component: 1000  -  total flux cleaned = -0.00148345 Jy
! Component: 1050  -  total flux cleaned = -0.00152469 Jy
! Component: 1100  -  total flux cleaned = -0.00164783 Jy
! Component: 1150  -  total flux cleaned = -0.00172884 Jy
! Component: 1200  -  total flux cleaned = -0.00176838 Jy
! Component: 1250  -  total flux cleaned = -0.0018081 Jy
! Component: 1300  -  total flux cleaned = -0.00200209 Jy
! Component: 1350  -  total flux cleaned = -0.00211706 Jy
! Component: 1400  -  total flux cleaned = -0.00211798 Jy
! Component: 1450  -  total flux cleaned = -0.00245468 Jy
! Component: 1500  -  total flux cleaned = -0.00249171 Jy
! Component: 1550  -  total flux cleaned = -0.00260078 Jy
! Component: 1600  -  total flux cleaned = -0.00270929 Jy
! Component: 1650  -  total flux cleaned = -0.00270873 Jy
! Component: 1700  -  total flux cleaned = -0.00270838 Jy
! Component: 1750  -  total flux cleaned = -0.00277852 Jy
! Component: 1800  -  total flux cleaned = -0.00270918 Jy
! Component: 1850  -  total flux cleaned = -0.0027778 Jy
! Component: 1900  -  total flux cleaned = -0.00277786 Jy
! Component: 1950  -  total flux cleaned = -0.00287846 Jy
! Component: 2000  -  total flux cleaned = -0.00274566 Jy
! Component: 2050  -  total flux cleaned = -0.00277873 Jy
! Component: 2100  -  total flux cleaned = -0.00274603 Jy
! Component: 2150  -  total flux cleaned = -0.00287523 Jy
! Component: 2200  -  total flux cleaned = -0.00284293 Jy
! Component: 2250  -  total flux cleaned = -0.00290601 Jy
! Component: 2300  -  total flux cleaned = -0.00281155 Jy
! Component: 2350  -  total flux cleaned = -0.00299717 Jy
! Component: 2400  -  total flux cleaned = -0.0029354 Jy
! Component: 2450  -  total flux cleaned = -0.00305647 Jy
! Component: 2500  -  total flux cleaned = -0.00305631 Jy
! Component: 2550  -  total flux cleaned = -0.00308561 Jy
! Component: 2600  -  total flux cleaned = -0.00302673 Jy
! Component: 2650  -  total flux cleaned = -0.00317326 Jy
! Component: 2700  -  total flux cleaned = -0.00320205 Jy
! Component: 2750  -  total flux cleaned = -0.00328885 Jy
! Component: 2800  -  total flux cleaned = -0.00323157 Jy
! Component: 2850  -  total flux cleaned = -0.00337325 Jy
! Component: 2900  -  total flux cleaned = -0.00342931 Jy
! Component: 2950  -  total flux cleaned = -0.00342938 Jy
! Component: 3000  -  total flux cleaned = -0.00351255 Jy
! Component: 3050  -  total flux cleaned = -0.00362234 Jy
! Component: 3100  -  total flux cleaned = -0.00362218 Jy
! Component: 3150  -  total flux cleaned = -0.00359506 Jy
! Component: 3200  -  total flux cleaned = -0.00367591 Jy
! Component: 3250  -  total flux cleaned = -0.00370316 Jy
! Component: 3300  -  total flux cleaned = -0.00386246 Jy
! Component: 3350  -  total flux cleaned = -0.00388844 Jy
! Component: 3400  -  total flux cleaned = -0.0041497 Jy
! Component: 3450  -  total flux cleaned = -0.00412339 Jy
! Component: 3500  -  total flux cleaned = -0.00412351 Jy
! Component: 3550  -  total flux cleaned = -0.00420036 Jy
! Component: 3600  -  total flux cleaned = -0.00430152 Jy
! Component: 3650  -  total flux cleaned = -0.00445259 Jy
! Component: 3700  -  total flux cleaned = -0.00450217 Jy
! Component: 3750  -  total flux cleaned = -0.00452722 Jy
! Component: 3800  -  total flux cleaned = -0.00465074 Jy
! Component: 3850  -  total flux cleaned = -0.00467505 Jy
! Component: 3900  -  total flux cleaned = -0.00482098 Jy
! Component: 3950  -  total flux cleaned = -0.00498989 Jy
! Component: 4000  -  total flux cleaned = -0.00501422 Jy
! Component: 4050  -  total flux cleaned = -0.0049902 Jy
! Total flux subtracted in 4096 components = -0.00501424 Jy
! Clean residual min=-0.001392 max=0.001686 Jy/beam
! Clean residual mean=-0.000003 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.492208 Jy
keep
! Adding 309 model components to the UV plane model.
! The established model now contains 412 components and 0.492208 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rdv94_uvs/J0856-1105_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.982 x 13.95 at -16.02 degrees (North through East)
! Clean map  min=-0.0036664  max=0.46285 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J0856-1105_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.462855 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000487558 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.316011 0.316011 0.632022 1.26404 2.52809 5.05618 10.1124 20.2247 40.4494 80.8989
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0014 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.462 
quit
! Quitting program
! Log file /scr/pima/rdv94_uvs/J0856-1105_S_uvs.log closed on Mon Sep 23 22:10:26 2013