! Started logfile: /scr/pima/rdv94_uvs/J0701-4634_S_uvs.log on Mon Sep 23 22:09:30 2013
obs /scr/pima/rdv94_uvs/J0701-4634_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv94_uvs/J0701-4634_S_uva.fits
! AN table 1: 178 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.950375 visibilities/baseline/integration-bin.
! Found source: J0701-4634
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09      1.6e+07          1      1.6e+07
!  02        2  2.26693e+09      1.6e+07          1      1.6e+07
!  03        3  2.35693e+09      1.6e+07          1      1.6e+07
!  04        4  2.37693e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4060 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J0701-4634_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.097077Jy  sigma=1.956062
! Fit after  self-cal, rms=0.613510Jy  sigma=1.106594
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=20.23 mas, bmaj=82.5 mas, bpa=2.734 degrees
! Estimated noise=6.52481 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.319394 Jy
! Component: 100  -  total flux cleaned = 0.389122 Jy
! Total flux subtracted in 100 components = 0.389122 Jy
! Clean residual min=-0.018555 max=0.020389 Jy/beam
! Clean residual mean=-0.000140 rms=0.007113 Jy/beam
! Combined flux in latest and established models = 0.389122 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.389122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174119Jy  sigma=0.305408
! Fit after  self-cal, rms=0.174117Jy  sigma=0.305403
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=22.01 mas, bmaj=84.29 mas, bpa=4.367 degrees
! Estimated noise=6.17836 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117384 Jy
! Component: 100  -  total flux cleaned = 0.0177928 Jy
! Component: 150  -  total flux cleaned = 0.0221831 Jy
! Component: 200  -  total flux cleaned = 0.0266974 Jy
! Total flux subtracted in 200 components = 0.0266974 Jy
! Clean residual min=-0.008882 max=0.008919 Jy/beam
! Clean residual mean=0.000007 rms=0.004267 Jy/beam
! Combined flux in latest and established models = 0.41582 Jy
! Performing phase self-cal
! Adding 109 model components to the UV plane model.
! The established model now contains 116 components and 0.415819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.168565Jy  sigma=0.295727
! Fit after  self-cal, rms=0.168465Jy  sigma=0.295467
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     KP        1.04     LA        1.26     PT        0.98     
! 
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        1.08     LA        1.17     PT        1.01     
! 
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        0.94     LA        0.92     PT        1.04     
! 
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        0.89     LA        0.76     PT        0.92     
! 
! 
! Fit before self-cal, rms=0.168465Jy  sigma=0.295467
! Fit after  self-cal, rms=0.144460Jy  sigma=0.261744
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=22.2 mas, bmaj=85.31 mas, bpa=3.284 degrees
! Estimated noise=6.20246 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000963115 Jy
! Component: 100  -  total flux cleaned = -0.00277747 Jy
! Component: 150  -  total flux cleaned = -0.00394802 Jy
! Component: 200  -  total flux cleaned = -0.00520341 Jy
! Total flux subtracted in 200 components = -0.00520341 Jy
! Clean residual min=-0.001717 max=0.001699 Jy/beam
! Clean residual mean=0.000078 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.410616 Jy
! Performing phase self-cal
! Adding 123 model components to the UV plane model.
! The established model now contains 239 components and 0.410616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143946Jy  sigma=0.260717
! Fit after  self-cal, rms=0.144281Jy  sigma=0.260482
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144281Jy  sigma=0.260482
! Fit after  self-cal, rms=0.143808Jy  sigma=0.259948
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.2 mas, bmaj=85.39 mas, bpa=3.3 degrees
! Estimated noise=6.19477 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183543 Jy
! Component: 100  -  total flux cleaned = 0.00207265 Jy
! Component: 150  -  total flux cleaned = 0.00176334 Jy
! Component: 200  -  total flux cleaned = 0.00171421 Jy
! Total flux subtracted in 200 components = 0.00171421 Jy
! Clean residual min=-0.000771 max=0.000771 Jy/beam
! Clean residual mean=0.000012 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.41233 Jy
selfcal
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 327 components and 0.41233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143759Jy  sigma=0.259880
! Fit after  self-cal, rms=0.143785Jy  sigma=0.259872
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000170535 Jy
! Component: 100  -  total flux cleaned = 8.88434e-06 Jy
! Component: 150  -  total flux cleaned = -6.73782e-05 Jy
! Component: 200  -  total flux cleaned = -0.000102943 Jy
! Total flux subtracted in 200 components = -0.000102943 Jy
! Clean residual min=-0.000591 max=0.000594 Jy/beam
! Clean residual mean=0.000015 rms=0.000282 Jy/beam
! Combined flux in latest and established models = 0.412227 Jy
! Performing phase self-cal
! Adding 79 model components to the UV plane model.
! The established model now contains 404 components and 0.412227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143764Jy  sigma=0.259842
! Fit after  self-cal, rms=0.143761Jy  sigma=0.259841
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143761Jy  sigma=0.259841
! Fit after  self-cal, rms=0.143572Jy  sigma=0.259820
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.2 mas, bmaj=85.37 mas, bpa=3.306 degrees
! Estimated noise=6.18738 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00058665 Jy
! Component: 100  -  total flux cleaned = 0.000814931 Jy
! Component: 150  -  total flux cleaned = 0.00102718 Jy
! Component: 200  -  total flux cleaned = 0.0012696 Jy
! Total flux subtracted in 200 components = 0.0012696 Jy
! Clean residual min=-0.000566 max=0.000566 Jy/beam
! Clean residual mean=0.000006 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.413497 Jy
selfcal
! Performing phase self-cal
! Adding 90 model components to the UV plane model.
! The established model now contains 482 components and 0.413497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143552Jy  sigma=0.259795
! Fit after  self-cal, rms=0.143557Jy  sigma=0.259793
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.47009e-05 Jy
! Component: 100  -  total flux cleaned = 8.81344e-05 Jy
! Component: 150  -  total flux cleaned = -5.31745e-06 Jy
! Component: 200  -  total flux cleaned = -0.000184298 Jy
! Total flux subtracted in 200 components = -0.000184298 Jy
! Clean residual min=-0.000492 max=0.000487 Jy/beam
! Clean residual mean=0.000003 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.413313 Jy
! Performing phase self-cal
! Adding 89 model components to the UV plane model.
! The established model now contains 549 components and 0.413313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143544Jy  sigma=0.259773
! Fit after  self-cal, rms=0.143543Jy  sigma=0.259772
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143543Jy  sigma=0.259772
! Fit after  self-cal, rms=0.143452Jy  sigma=0.259769
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.51 mas, bmaj=86.14 mas, bpa=3.3 degrees
! Estimated noise=6.18474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000262648 Jy
! Component: 100  -  total flux cleaned = -0.000200321 Jy
! Component: 150  -  total flux cleaned = -0.000435473 Jy
! Component: 200  -  total flux cleaned = -0.000664288 Jy
! Total flux subtracted in 200 components = -0.000664288 Jy
! Clean residual min=-0.000473 max=0.000474 Jy/beam
! Clean residual mean=0.000005 rms=0.000211 Jy/beam
! Combined flux in latest and established models = 0.412648 Jy
selfcal
! Performing phase self-cal
! Adding 77 model components to the UV plane model.
! The established model now contains 598 components and 0.412648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143437Jy  sigma=0.259751
! Fit after  self-cal, rms=0.143437Jy  sigma=0.259750
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000326191 Jy
! Component: 100  -  total flux cleaned = 0.000408954 Jy
! Component: 150  -  total flux cleaned = 0.000435743 Jy
! Component: 200  -  total flux cleaned = 0.000410417 Jy
! Total flux subtracted in 200 components = 0.000410417 Jy
! Clean residual min=-0.000428 max=0.000426 Jy/beam
! Clean residual mean=0.000005 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.413059 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 626 components and 0.413059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143427Jy  sigma=0.259734
! Fit after  self-cal, rms=0.143428Jy  sigma=0.259733
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=22.2 mas, bmaj=85.34 mas, bpa=3.313 degrees
! Estimated noise=6.18376 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 22.2 x 85.34 at 3.313 degrees (North through East)
! Clean map  min=-0.011064  max=0.39789 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=20.26 mas, bmaj=82.61 mas, bpa=2.564 degrees
! Estimated noise=6.5611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.313864 Jy
! Component: 100  -  total flux cleaned = 0.38235 Jy
! Component: 150  -  total flux cleaned = 0.388947 Jy
! Component: 200  -  total flux cleaned = 0.39107 Jy
! Total flux subtracted in 200 components = 0.39107 Jy
! Clean residual min=-0.007650 max=0.007605 Jy/beam
! Clean residual mean=-0.000064 rms=0.003601 Jy/beam
! Combined flux in latest and established models = 0.39107 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 57 model components to the UV plane model.
! The established model now contains 57 components and 0.39107 Jy
! Inverting map and beam 
! Estimated beam: bmin=22.2 mas, bmaj=85.34 mas, bpa=3.313 degrees
! Estimated noise=6.18376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000727868 Jy
! Component: 100  -  total flux cleaned = 0.000981924 Jy
! Component: 150  -  total flux cleaned = 0.00324914 Jy
! Component: 200  -  total flux cleaned = 0.00517811 Jy
! Total flux subtracted in 200 components = 0.00517811 Jy
! Clean residual min=-0.003291 max=0.003311 Jy/beam
! Clean residual mean=0.000011 rms=0.001682 Jy/beam
! Combined flux in latest and established models = 0.396248 Jy
! Adding 125 model components to the UV plane model.
! The established model now contains 182 components and 0.396248 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.51 mas, bmaj=86.14 mas, bpa=3.3 degrees
! Estimated noise=6.18474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00198889 Jy
! Component: 100  -  total flux cleaned = 0.00371187 Jy
! Component: 150  -  total flux cleaned = 0.00459582 Jy
! Component: 200  -  total flux cleaned = 0.00504017 Jy
! Total flux subtracted in 200 components = 0.00504017 Jy
! Clean residual min=-0.001758 max=0.001779 Jy/beam
! Clean residual mean=0.000034 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.401288 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.77043e-06 Jy
! Component: 100  -  total flux cleaned = 1.27672e-05 Jy
! Component: 150  -  total flux cleaned = 0.000100857 Jy
! Component: 200  -  total flux cleaned = 1.36048e-05 Jy
! Total flux subtracted in 200 components = 1.36048e-05 Jy
! Clean residual min=-0.001345 max=0.001374 Jy/beam
! Clean residual mean=0.000019 rms=0.000641 Jy/beam
! Combined flux in latest and established models = 0.401302 Jy
! Adding 210 model components to the UV plane model.
! The established model now contains 387 components and 0.401301 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=22.2 mas, bmaj=85.34 mas, bpa=3.313 degrees
! Estimated noise=6.18376 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000669742 Jy
! Component: 100  -  total flux cleaned = -0.00133739 Jy
! Component: 150  -  total flux cleaned = -0.00183186 Jy
! Component: 200  -  total flux cleaned = -0.00183251 Jy
! Total flux subtracted in 200 components = -0.00183251 Jy
! Clean residual min=-0.000960 max=0.000967 Jy/beam
! Clean residual mean=0.000023 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.399469 Jy
selfcal
! Performing phase self-cal
! Adding 91 model components to the UV plane model.
! The established model now contains 474 components and 0.399469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143492Jy  sigma=0.259858
! Fit after  self-cal, rms=0.143467Jy  sigma=0.259845
wmodel /scr/pima/rdv94_uvs/J0701-4634_S_map.mod
! Writing 474 model components to file: /scr/pima/rdv94_uvs/J0701-4634_S_map.mod
wobs /scr/pima/rdv94_uvs/J0701-4634_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv94_uvs/J0701-4634_S_uvs.fits
wwins /scr/pima/rdv94_uvs/J0701-4634_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/rdv94_uvs/J0701-4634_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 22.2 x 85.34 at 3.313 degrees (North through East)
! Clean map  min=-0.0099204  max=0.39435 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J0701-4634_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.394351 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000396844 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.301896 0.301896 0.603793 1.20759 2.41517 4.83034 9.66068 19.3214 38.6427 77.2855
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0011 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.394 
quit
! Quitting program
! Log file /scr/pima/rdv94_uvs/J0701-4634_S_uvs.log closed on Mon Sep 23 22:09:38 2013