! Started logfile: /scr/pima/rdv94_uvs/J0607-2447_X_uvs.log on Mon Sep 23 22:08:56 2013 obs /scr/pima/rdv94_uvs/J0607-2447_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv94_uvs/J0607-2447_X_uva.fits ! AN table 1: 89 integrations on 21 of 21 possible baselines. ! AN table 2: 89 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.967869 visibilities/baseline/integration-bin. ! Found source: J0607-2447 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47993e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79493e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89993e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 19640 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J0607-2447_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.013550Jy sigma=0.659049 ! Fit after self-cal, rms=0.903710Jy sigma=0.576719 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9488 mas, bmaj=4.086 mas, bpa=-14.28 degrees ! Estimated noise=17.7054 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0789866 Jy ! Component: 100 - total flux cleaned = 0.100925 Jy ! Total flux subtracted in 100 components = 0.100925 Jy ! Clean residual min=-0.006540 max=0.008750 Jy/beam ! Clean residual mean=0.000002 rms=0.001597 Jy/beam ! Combined flux in latest and established models = 0.100925 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.100925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119845Jy sigma=0.069575 ! Fit after self-cal, rms=0.119535Jy sigma=0.069355 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.271 mas, bmaj=4.726 mas, bpa=-12.11 degrees ! Estimated noise=8.2012 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132862 Jy ! Component: 100 - total flux cleaned = 0.0192085 Jy ! Component: 150 - total flux cleaned = 0.0222183 Jy ! Component: 200 - total flux cleaned = 0.0239262 Jy ! Total flux subtracted in 200 components = 0.0239262 Jy ! Clean residual min=-0.003913 max=0.006024 Jy/beam ! Clean residual mean=0.000001 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.124851 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 52 components and 0.124851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118547Jy sigma=0.068186 ! Fit after self-cal, rms=0.118663Jy sigma=0.068159 ! Inverting map ! Added new window around map position (-2.6, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504535 Jy ! Component: 100 - total flux cleaned = 0.00717177 Jy ! Component: 150 - total flux cleaned = 0.00807079 Jy ! Component: 200 - total flux cleaned = 0.0087008 Jy ! Total flux subtracted in 200 components = 0.0087008 Jy ! Clean residual min=-0.003205 max=0.003154 Jy/beam ! Clean residual mean=-0.000003 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.133552 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 88 components and 0.133552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118477Jy sigma=0.067975 ! Fit after self-cal, rms=0.118493Jy sigma=0.067941 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 0.98 KP 1.02 ! LA 1.00 NL 0.94 OV 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.95 HN 1.01 KP 1.01 ! LA 1.04 MK 1.02 NL 1.08 OV 0.99 ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.99 HN 1.00 KP 0.97 ! LA 1.03 NL 0.97 OV 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.99 HN 1.04 KP 0.98 ! LA 1.00 MK 1.00 NL 1.02 OV 1.03 ! PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.92 HN 1.05 KP 0.94 ! LA 1.03 NL 0.98 OV 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.05 HN 0.93 KP 0.86 ! LA 1.07 MK 0.94 NL 1.01 OV 1.04 ! PT 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 0.86 KP 0.96 ! LA 1.05 NL 0.99 OV 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.97 HN 0.95 KP 0.96 ! LA 1.02 MK 1.05 NL 1.14 OV 1.00 ! PT 1.04 ! ! ! Fit before self-cal, rms=0.118493Jy sigma=0.067941 ! Fit after self-cal, rms=0.117575Jy sigma=0.067765 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.271 mas, bmaj=4.732 mas, bpa=-12.04 degrees ! Estimated noise=8.1704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217097 Jy ! Component: 100 - total flux cleaned = 0.00283964 Jy ! Component: 150 - total flux cleaned = 0.00292072 Jy ! Component: 200 - total flux cleaned = 0.00299417 Jy ! Total flux subtracted in 200 components = 0.00299417 Jy ! Clean residual min=-0.002434 max=0.002316 Jy/beam ! Clean residual mean=0.000002 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.136546 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 115 components and 0.136546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117530Jy sigma=0.067727 ! Fit after self-cal, rms=0.117601Jy sigma=0.067709 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117601Jy sigma=0.067709 ! Fit after self-cal, rms=0.117817Jy sigma=0.067706 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.272 mas, bmaj=4.734 mas, bpa=-12.05 degrees ! Estimated noise=8.17503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114344 Jy ! Component: 100 - total flux cleaned = 0.00150575 Jy ! Component: 150 - total flux cleaned = 0.00163538 Jy ! Component: 200 - total flux cleaned = 0.00175432 Jy ! Total flux subtracted in 200 components = 0.00175432 Jy ! Clean residual min=-0.002386 max=0.002311 Jy/beam ! Clean residual mean=0.000001 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.1383 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 134 components and 0.1383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117793Jy sigma=0.067692 ! Fit after self-cal, rms=0.117817Jy sigma=0.067690 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000703985 Jy ! Component: 100 - total flux cleaned = 0.000815421 Jy ! Component: 150 - total flux cleaned = 0.000920396 Jy ! Component: 200 - total flux cleaned = 0.000995426 Jy ! Total flux subtracted in 200 components = 0.000995426 Jy ! Clean residual min=-0.002324 max=0.002316 Jy/beam ! Clean residual mean=0.000001 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.139296 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 147 components and 0.139296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117802Jy sigma=0.067684 ! Fit after self-cal, rms=0.117810Jy sigma=0.067683 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117810Jy sigma=0.067683 ! Fit after self-cal, rms=0.118328Jy sigma=0.067679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.273 mas, bmaj=4.74 mas, bpa=-12.06 degrees ! Estimated noise=8.19168 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551771 Jy ! Component: 100 - total flux cleaned = 0.00075738 Jy ! Component: 150 - total flux cleaned = 0.000899641 Jy ! Component: 200 - total flux cleaned = 0.00096498 Jy ! Total flux subtracted in 200 components = 0.00096498 Jy ! Clean residual min=-0.002316 max=0.002294 Jy/beam ! Clean residual mean=0.000001 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.140261 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 157 components and 0.14026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118315Jy sigma=0.067673 ! Fit after self-cal, rms=0.118327Jy sigma=0.067673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00041129 Jy ! Component: 100 - total flux cleaned = 0.000433891 Jy ! Component: 150 - total flux cleaned = 0.000474333 Jy ! Component: 200 - total flux cleaned = 0.000493918 Jy ! Total flux subtracted in 200 components = 0.000493918 Jy ! Clean residual min=-0.002271 max=0.002287 Jy/beam ! Clean residual mean=0.000001 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.140754 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 172 components and 0.140754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118318Jy sigma=0.067669 ! Fit after self-cal, rms=0.118323Jy sigma=0.067669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118323Jy sigma=0.067669 ! Fit after self-cal, rms=0.118621Jy sigma=0.067666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.392 mas, bmaj=6.302 mas, bpa=-0.3652 degrees ! Estimated noise=8.28358 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000596177 Jy ! Component: 100 - total flux cleaned = 0.000783574 Jy ! Component: 150 - total flux cleaned = 0.000889019 Jy ! Component: 200 - total flux cleaned = 0.000991308 Jy ! Total flux subtracted in 200 components = 0.000991308 Jy ! Clean residual min=-0.002405 max=0.002395 Jy/beam ! Clean residual mean=0.000002 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.141746 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 189 components and 0.141746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118618Jy sigma=0.067663 ! Fit after self-cal, rms=0.118620Jy sigma=0.067662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120615 Jy ! Component: 100 - total flux cleaned = 0.000235675 Jy ! Component: 150 - total flux cleaned = 0.000301682 Jy ! Component: 200 - total flux cleaned = 0.000361509 Jy ! Total flux subtracted in 200 components = 0.000361509 Jy ! Clean residual min=-0.002390 max=0.002397 Jy/beam ! Clean residual mean=0.000003 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.142107 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 198 components and 0.142107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118620Jy sigma=0.067661 ! Fit after self-cal, rms=0.118618Jy sigma=0.067660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.274 mas, bmaj=4.744 mas, bpa=-12.05 degrees ! Estimated noise=8.20526 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.274 x 4.744 at -12.05 degrees (North through East) ! Clean map min=-0.002164 max=0.1045 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9528 mas, bmaj=4.1 mas, bpa=-14.17 degrees ! Estimated noise=17.6953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0787218 Jy ! Component: 100 - total flux cleaned = 0.100609 Jy ! Component: 150 - total flux cleaned = 0.111531 Jy ! Component: 200 - total flux cleaned = 0.118561 Jy ! Total flux subtracted in 200 components = 0.118561 Jy ! Clean residual min=-0.004751 max=0.005101 Jy/beam ! Clean residual mean=0.000003 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.118561 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.118561 Jy ! Inverting map and beam ! Estimated beam: bmin=1.274 mas, bmaj=4.744 mas, bpa=-12.05 degrees ! Estimated noise=8.20526 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00693242 Jy ! Component: 100 - total flux cleaned = 0.0112897 Jy ! Component: 150 - total flux cleaned = 0.0143632 Jy ! Component: 200 - total flux cleaned = 0.0166485 Jy ! Total flux subtracted in 200 components = 0.0166485 Jy ! Clean residual min=-0.002677 max=0.002352 Jy/beam ! Clean residual mean=0.000001 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.135209 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 76 components and 0.135209 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.392 mas, bmaj=6.302 mas, bpa=-0.3652 degrees ! Estimated noise=8.28358 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209698 Jy ! Component: 100 - total flux cleaned = 0.00304824 Jy ! Component: 150 - total flux cleaned = 0.00382069 Jy ! Component: 200 - total flux cleaned = 0.00435608 Jy ! Total flux subtracted in 200 components = 0.00435608 Jy ! Clean residual min=-0.002606 max=0.002278 Jy/beam ! Clean residual mean=0.000001 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.139565 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00046754 Jy ! Component: 100 - total flux cleaned = 0.000790588 Jy ! Component: 150 - total flux cleaned = 0.00103177 Jy ! Component: 200 - total flux cleaned = 0.00124683 Jy ! Total flux subtracted in 200 components = 0.00124683 Jy ! Clean residual min=-0.002484 max=0.002287 Jy/beam ! Clean residual mean=0.000002 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.140812 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 134 components and 0.140812 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.274 mas, bmaj=4.744 mas, bpa=-12.05 degrees ! Estimated noise=8.20526 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.39063e-06 Jy ! Component: 100 - total flux cleaned = 0.000184261 Jy ! Component: 150 - total flux cleaned = 0.000412342 Jy ! Component: 200 - total flux cleaned = 0.000593271 Jy ! Total flux subtracted in 200 components = 0.000593271 Jy ! Clean residual min=-0.002397 max=0.002285 Jy/beam ! Clean residual mean=0.000001 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.141405 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 153 components and 0.141405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118657Jy sigma=0.067671 ! Fit after self-cal, rms=0.118634Jy sigma=0.067668 wmodel /scr/pima/rdv94_uvs/J0607-2447_X_map.mod ! Writing 153 model components to file: /scr/pima/rdv94_uvs/J0607-2447_X_map.mod wobs /scr/pima/rdv94_uvs/J0607-2447_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv94_uvs/J0607-2447_X_uvs.fits wwins /scr/pima/rdv94_uvs/J0607-2447_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rdv94_uvs/J0607-2447_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.04055e-05 Jy ! Component: 100 - total flux cleaned = -0.000319226 Jy ! Component: 150 - total flux cleaned = -0.000535976 Jy ! Component: 200 - total flux cleaned = -0.000638428 Jy ! Component: 250 - total flux cleaned = -0.000768934 Jy ! Component: 300 - total flux cleaned = -0.00095523 Jy ! Component: 350 - total flux cleaned = -0.00110595 Jy ! Component: 400 - total flux cleaned = -0.00125179 Jy ! Component: 450 - total flux cleaned = -0.00133668 Jy ! Component: 500 - total flux cleaned = -0.00139187 Jy ! Component: 550 - total flux cleaned = -0.00141883 Jy ! Component: 600 - total flux cleaned = -0.00141926 Jy ! Component: 650 - total flux cleaned = -0.00149504 Jy ! Component: 700 - total flux cleaned = -0.0014947 Jy ! Component: 750 - total flux cleaned = -0.0015669 Jy ! Component: 800 - total flux cleaned = -0.00151926 Jy ! Component: 850 - total flux cleaned = -0.00154308 Jy ! Component: 900 - total flux cleaned = -0.00165645 Jy ! Component: 950 - total flux cleaned = -0.00165651 Jy ! Component: 1000 - total flux cleaned = -0.00178718 Jy ! Component: 1050 - total flux cleaned = -0.00178746 Jy ! Component: 1100 - total flux cleaned = -0.00185046 Jy ! Component: 1150 - total flux cleaned = -0.00180927 Jy ! Component: 1200 - total flux cleaned = -0.00182969 Jy ! Component: 1250 - total flux cleaned = -0.00184948 Jy ! Component: 1300 - total flux cleaned = -0.00180996 Jy ! Component: 1350 - total flux cleaned = -0.00169421 Jy ! Component: 1400 - total flux cleaned = -0.0016373 Jy ! Component: 1450 - total flux cleaned = -0.00158088 Jy ! Component: 1500 - total flux cleaned = -0.00150629 Jy ! Component: 1550 - total flux cleaned = -0.00141473 Jy ! Component: 1600 - total flux cleaned = -0.00137831 Jy ! Component: 1650 - total flux cleaned = -0.00123612 Jy ! Component: 1700 - total flux cleaned = -0.00116621 Jy ! Component: 1750 - total flux cleaned = -0.00107945 Jy ! Component: 1800 - total flux cleaned = -0.00102822 Jy ! Component: 1850 - total flux cleaned = -0.000994434 Jy ! Component: 1900 - total flux cleaned = -0.00092782 Jy ! Component: 1950 - total flux cleaned = -0.000862045 Jy ! Component: 2000 - total flux cleaned = -0.000845825 Jy ! Component: 2050 - total flux cleaned = -0.000829555 Jy ! Component: 2100 - total flux cleaned = -0.000781948 Jy ! Component: 2150 - total flux cleaned = -0.000844817 Jy ! Component: 2200 - total flux cleaned = -0.000797941 Jy ! Component: 2250 - total flux cleaned = -0.000782439 Jy ! Component: 2300 - total flux cleaned = -0.000751838 Jy ! Component: 2350 - total flux cleaned = -0.000782101 Jy ! Component: 2400 - total flux cleaned = -0.000797152 Jy ! Component: 2450 - total flux cleaned = -0.000767469 Jy ! Component: 2500 - total flux cleaned = -0.00078227 Jy ! Component: 2550 - total flux cleaned = -0.000782361 Jy ! Component: 2600 - total flux cleaned = -0.000869235 Jy ! Component: 2650 - total flux cleaned = -0.000854785 Jy ! Component: 2700 - total flux cleaned = -0.000854782 Jy ! Component: 2750 - total flux cleaned = -0.000897086 Jy ! Component: 2800 - total flux cleaned = -0.000869183 Jy ! Component: 2850 - total flux cleaned = -0.000911021 Jy ! Component: 2900 - total flux cleaned = -0.000924792 Jy ! Component: 2950 - total flux cleaned = -0.000938346 Jy ! Component: 3000 - total flux cleaned = -0.000992483 Jy ! Component: 3050 - total flux cleaned = -0.000952107 Jy ! Component: 3100 - total flux cleaned = -0.000965489 Jy ! Component: 3150 - total flux cleaned = -0.000952375 Jy ! Component: 3200 - total flux cleaned = -0.000912724 Jy ! Component: 3250 - total flux cleaned = -0.000925923 Jy ! Component: 3300 - total flux cleaned = -0.000926004 Jy ! Component: 3350 - total flux cleaned = -0.000925916 Jy ! Component: 3400 - total flux cleaned = -0.000887489 Jy ! Component: 3450 - total flux cleaned = -0.000887434 Jy ! Component: 3500 - total flux cleaned = -0.000836976 Jy ! Component: 3550 - total flux cleaned = -0.000861933 Jy ! Component: 3600 - total flux cleaned = -0.000837043 Jy ! Component: 3650 - total flux cleaned = -0.000775189 Jy ! Component: 3700 - total flux cleaned = -0.000762919 Jy ! Component: 3750 - total flux cleaned = -0.000762857 Jy ! Component: 3800 - total flux cleaned = -0.000750782 Jy ! Component: 3850 - total flux cleaned = -0.000750797 Jy ! Component: 3900 - total flux cleaned = -0.000714991 Jy ! Component: 3950 - total flux cleaned = -0.00071504 Jy ! Component: 4000 - total flux cleaned = -0.000691421 Jy ! Component: 4050 - total flux cleaned = -0.000691336 Jy ! Total flux subtracted in 4096 components = -0.000644629 Jy ! Clean residual min=-0.000680 max=0.000632 Jy/beam ! Clean residual mean=-0.000002 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.140761 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 462 components and 0.140761 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv94_uvs/J0607-2447_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.274 x 4.744 at -12.05 degrees (North through East) ! Clean map min=-0.0017428 max=0.1034 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J0607-2447_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.103396 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00021941 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.636612 0.636612 1.27322 2.54645 5.09289 10.1858 20.3716 40.7431 81.4863 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.103 quit ! Quitting program ! Log file /scr/pima/rdv94_uvs/J0607-2447_X_uvs.log closed on Mon Sep 23 22:09:02 2013