! Started logfile: /scr/pima/rdv94_uvs/J0527+0331_X_uvs.log on Mon Sep 23 22:08:42 2013
obs /scr/pima/rdv94_uvs/J0527+0331_X_uva.fits
! Reading UV FITS file: /scr/pima/rdv94_uvs/J0527+0331_X_uva.fits
! AN table 1: 19 integrations on 15 of 15 possible baselines.
! AN table 2: 103 integrations on 28 of 28 possible baselines.
! AN table 3: 74 integrations on 36 of 36 possible baselines.
! AN table 4: 18 integrations on 15 of 15 possible baselines.
! AN table 5: 22 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.47388 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0527+0331
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40993e+09      1.6e+07          1      1.6e+07
!  02        2  8.47993e+09      1.6e+07          1      1.6e+07
!  03        3  8.79493e+09      1.6e+07          1      1.6e+07
!  04        4  8.89993e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 12736 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J0527+0331_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 450 telescope corrections were flagged in sub-array 2.
!  A total of 397 telescope corrections were flagged in sub-array 3.
!  A total of 35 telescope corrections were flagged in sub-array 4.
!  A total of 43 telescope corrections were flagged in sub-array 5.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 450 telescope corrections were flagged in sub-array 2.
!  A total of 397 telescope corrections were flagged in sub-array 3.
!  A total of 35 telescope corrections were flagged in sub-array 4.
!  A total of 43 telescope corrections were flagged in sub-array 5.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 450 telescope corrections were flagged in sub-array 2.
!  A total of 397 telescope corrections were flagged in sub-array 3.
!  A total of 35 telescope corrections were flagged in sub-array 4.
!  A total of 43 telescope corrections were flagged in sub-array 5.
! 
! Correcting IF 4.
!  A total of 19 telescope corrections were flagged in sub-array 1.
!  A total of 450 telescope corrections were flagged in sub-array 2.
!  A total of 397 telescope corrections were flagged in sub-array 3.
!  A total of 35 telescope corrections were flagged in sub-array 4.
!  A total of 43 telescope corrections were flagged in sub-array 5.
! 
! Fit before self-cal, rms=1.106424Jy  sigma=3.506711
! Fit after  self-cal, rms=0.594325Jy  sigma=1.860065
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9123 mas, bmaj=3.164 mas, bpa=-18.89 degrees
! Estimated noise=3.27218 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.320983 Jy
! Component: 100  -  total flux cleaned = 0.391027 Jy
! Total flux subtracted in 100 components = 0.391027 Jy
! Clean residual min=-0.010602 max=0.020105 Jy/beam
! Clean residual mean=-0.000002 rms=0.002573 Jy/beam
! Combined flux in latest and established models = 0.391027 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.391027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.114070Jy  sigma=0.344011
! Fit after  self-cal, rms=0.114056Jy  sigma=0.343986
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204569 Jy
! Component: 100  -  total flux cleaned = 0.0317956 Jy
! Total flux subtracted in 100 components = 0.0317956 Jy
! Clean residual min=-0.009199 max=0.010235 Jy/beam
! Clean residual mean=0.000000 rms=0.002172 Jy/beam
! Combined flux in latest and established models = 0.422823 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 23 components and 0.422823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110072Jy  sigma=0.327200
! Fit after  self-cal, rms=0.109957Jy  sigma=0.326942
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.086 mas, bmaj=3.424 mas, bpa=-18.39 degrees
! Estimated noise=2.2238 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00982516 Jy
! Component: 100  -  total flux cleaned = 0.013565 Jy
! Component: 150  -  total flux cleaned = 0.0149094 Jy
! Component: 200  -  total flux cleaned = 0.0157245 Jy
! Total flux subtracted in 200 components = 0.0157245 Jy
! Clean residual min=-0.007397 max=0.006598 Jy/beam
! Clean residual mean=0.000009 rms=0.001834 Jy/beam
! Combined flux in latest and established models = 0.438548 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 42 components and 0.438547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109309Jy  sigma=0.323372
! Fit after  self-cal, rms=0.109291Jy  sigma=0.323340
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     KP        1.02     LA        1.16     MK        1.03     
!   OV        0.97     PT        1.24     
! 
!  A total of 15 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        0.99     HN        0.97     KP        1.01     
!   LA        1.03     NL        0.98     OV        1.01     WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.91     FD        0.97     HN        0.98     KP        1.01     
!   LA        1.02     MK        1.02     NL        0.96     OV        0.95     
!   WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   KP        1.01     LA        1.05     MK        1.10     NL        1.00     
!   OV        0.97     PT        1.06     
! 
!  A total of 9 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   BR        0.95     HN        1.01     KP        1.01     LA        1.01     
!   MK        1.03     NL        0.98     OV        0.98     PT        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     KP        0.97     LA        1.18     MK        1.07     
!   OV        0.98     PT        1.10     
! 
!  A total of 15 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.18     FD        1.00     HN        1.00     KP        0.98     
!   LA        1.01     NL        1.00     OV        1.00     WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.28     FD        0.97     HN        0.97     KP        0.94     
!   LA        1.01     MK        1.03     NL        0.96     OV        0.93     
!   WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   KP        0.96     LA        1.00     MK        1.18     NL        1.02     
!   OV        0.92     PT        1.05     
! 
!  A total of 9 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.27     HN        1.02     KP        0.97     LA        1.00     
!   MK        1.03     NL        0.95     OV        0.98     PT        0.98     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     KP        0.95     LA        1.17     MK        1.02     
!   OV        1.05     PT        1.24     
! 
!  A total of 15 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.00     HN        1.02     KP        0.90     
!   LA        1.07     NL        1.01     OV        1.04     WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.97     FD        0.99     HN        1.01     KP        0.87     
!   LA        1.03     MK        1.00     NL        0.98     OV        0.98     
!   WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   KP        0.92     LA        1.03     MK        1.14     NL        0.99     
!   OV        1.04     PT        1.06     
! 
!  A total of 9 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   BR        0.99     HN        1.01     KP        0.88     LA        1.02     
!   MK        1.00     NL        1.00     OV        0.99     PT        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     KP        1.00     LA        1.13     MK        1.08     
!   OV        1.03     PT        1.12     
! 
!  A total of 15 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        1.04     HN        1.00     KP        0.92     
!   LA        1.06     NL        1.04     OV        1.02     WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.95     FD        0.99     HN        1.04     KP        0.92     
!   LA        1.02     MK        1.02     NL        1.02     OV        0.97     
!   WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   KP        0.92     LA        1.03     MK        1.15     NL        1.05     
!   OV        0.98     PT        1.13     
! 
!  A total of 9 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   BR        0.93     HN        1.02     KP        0.92     LA        1.00     
!   MK        1.05     NL        1.01     OV        1.00     PT        1.03     
! 
! 
! Fit before self-cal, rms=0.109291Jy  sigma=0.323340
! Fit after  self-cal, rms=0.107630Jy  sigma=0.307094
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.096 mas, bmaj=3.437 mas, bpa=-18.22 degrees
! Estimated noise=2.234 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000449792 Jy
! Component: 100  -  total flux cleaned = -0.00033698 Jy
! Component: 150  -  total flux cleaned = -0.000236931 Jy
! Component: 200  -  total flux cleaned = -0.000108378 Jy
! Total flux subtracted in 200 components = -0.000108378 Jy
! Clean residual min=-0.005150 max=0.005852 Jy/beam
! Clean residual mean=0.000004 rms=0.001232 Jy/beam
! Combined flux in latest and established models = 0.438439 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 51 components and 0.438439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107579Jy  sigma=0.306931
! Fit after  self-cal, rms=0.107717Jy  sigma=0.306861
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107717Jy  sigma=0.306861
! Fit after  self-cal, rms=0.107812Jy  sigma=0.306846
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.095 mas, bmaj=3.44 mas, bpa=-18.21 degrees
! Estimated noise=2.23448 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.96458e-05 Jy
! Component: 100  -  total flux cleaned = -6.60892e-06 Jy
! Component: 150  -  total flux cleaned = 6.65884e-05 Jy
! Component: 200  -  total flux cleaned = 6.8344e-05 Jy
! Total flux subtracted in 200 components = 6.8344e-05 Jy
! Clean residual min=-0.005095 max=0.005763 Jy/beam
! Clean residual mean=0.000004 rms=0.001227 Jy/beam
! Combined flux in latest and established models = 0.438507 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 57 components and 0.438507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107780Jy  sigma=0.306759
! Fit after  self-cal, rms=0.107784Jy  sigma=0.306755
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-22.2, 22.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00502045 Jy
! Component: 100  -  total flux cleaned = 0.00675125 Jy
! Component: 150  -  total flux cleaned = 0.00746186 Jy
! Component: 200  -  total flux cleaned = 0.00809352 Jy
! Total flux subtracted in 200 components = 0.00809352 Jy
! Clean residual min=-0.005088 max=0.005033 Jy/beam
! Clean residual mean=0.000004 rms=0.001178 Jy/beam
! Combined flux in latest and established models = 0.446601 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 82 components and 0.446601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107336Jy  sigma=0.306020
! Fit after  self-cal, rms=0.107319Jy  sigma=0.305937
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107319Jy  sigma=0.305937
! Fit after  self-cal, rms=0.106682Jy  sigma=0.304289
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.094 mas, bmaj=3.441 mas, bpa=-18.22 degrees
! Estimated noise=2.23545 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00262792 Jy
! Component: 100  -  total flux cleaned = 0.00325761 Jy
! Component: 150  -  total flux cleaned = 0.00374605 Jy
! Component: 200  -  total flux cleaned = 0.00419405 Jy
! Total flux subtracted in 200 components = 0.00419405 Jy
! Clean residual min=-0.005003 max=0.004643 Jy/beam
! Clean residual mean=-0.000001 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.450795 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 94 components and 0.450795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106463Jy  sigma=0.303987
! Fit after  self-cal, rms=0.106462Jy  sigma=0.303961
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000855141 Jy
! Component: 100  -  total flux cleaned = 0.00127278 Jy
! Component: 150  -  total flux cleaned = 0.0017256 Jy
! Component: 200  -  total flux cleaned = 0.00202942 Jy
! Total flux subtracted in 200 components = 0.00202942 Jy
! Clean residual min=-0.005079 max=0.004591 Jy/beam
! Clean residual mean=-0.000002 rms=0.001074 Jy/beam
! Combined flux in latest and established models = 0.452824 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 101 components and 0.452824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106347Jy  sigma=0.303795
! Fit after  self-cal, rms=0.106333Jy  sigma=0.303788
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106333Jy  sigma=0.303788
! Fit after  self-cal, rms=0.106159Jy  sigma=0.303720
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.227 mas, bmaj=3.617 mas, bpa=-16.79 degrees
! Estimated noise=2.55012 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206908 Jy
! Component: 100  -  total flux cleaned = 0.00331927 Jy
! Component: 150  -  total flux cleaned = 0.00431458 Jy
! Component: 200  -  total flux cleaned = 0.00503666 Jy
! Total flux subtracted in 200 components = 0.00503666 Jy
! Clean residual min=-0.004859 max=0.004951 Jy/beam
! Clean residual mean=-0.000002 rms=0.001287 Jy/beam
! Combined flux in latest and established models = 0.457861 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 113 components and 0.457861 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106090Jy  sigma=0.303640
! Fit after  self-cal, rms=0.106112Jy  sigma=0.303628
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000839275 Jy
! Component: 100  -  total flux cleaned = 0.00120311 Jy
! Component: 150  -  total flux cleaned = 0.00142647 Jy
! Component: 200  -  total flux cleaned = 0.00156486 Jy
! Total flux subtracted in 200 components = 0.00156486 Jy
! Clean residual min=-0.004953 max=0.005046 Jy/beam
! Clean residual mean=-0.000002 rms=0.001284 Jy/beam
! Combined flux in latest and established models = 0.459426 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 122 components and 0.459426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106068Jy  sigma=0.303592
! Fit after  self-cal, rms=0.106067Jy  sigma=0.303589
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.094 mas, bmaj=3.44 mas, bpa=-18.24 degrees
! Estimated noise=2.23611 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.094 x 3.44 at -18.24 degrees (North through East)
! Clean map  min=-0.0049842  max=0.41768 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.915 mas, bmaj=3.172 mas, bpa=-18.82 degrees
! Estimated noise=3.27006 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.324743 Jy
! Component: 100  -  total flux cleaned = 0.395971 Jy
! Component: 150  -  total flux cleaned = 0.415421 Jy
! Component: 200  -  total flux cleaned = 0.426625 Jy
! Total flux subtracted in 200 components = 0.426625 Jy
! Clean residual min=-0.007742 max=0.007214 Jy/beam
! Clean residual mean=-0.000007 rms=0.001770 Jy/beam
! Combined flux in latest and established models = 0.426625 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.426625 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.094 mas, bmaj=3.44 mas, bpa=-18.24 degrees
! Estimated noise=2.23611 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00832943 Jy
! Component: 100  -  total flux cleaned = 0.0137677 Jy
! Component: 150  -  total flux cleaned = 0.0168605 Jy
! Component: 200  -  total flux cleaned = 0.0189155 Jy
! Total flux subtracted in 200 components = 0.0189155 Jy
! Clean residual min=-0.005186 max=0.004995 Jy/beam
! Clean residual mean=-0.000000 rms=0.001151 Jy/beam
! Combined flux in latest and established models = 0.44554 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 54 components and 0.44554 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.227 mas, bmaj=3.617 mas, bpa=-16.79 degrees
! Estimated noise=2.55012 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00369695 Jy
! Component: 100  -  total flux cleaned = 0.00566194 Jy
! Component: 150  -  total flux cleaned = 0.00714288 Jy
! Component: 200  -  total flux cleaned = 0.00834213 Jy
! Total flux subtracted in 200 components = 0.00834213 Jy
! Clean residual min=-0.005116 max=0.004991 Jy/beam
! Clean residual mean=-0.000002 rms=0.001327 Jy/beam
! Combined flux in latest and established models = 0.453882 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000764324 Jy
! Component: 100  -  total flux cleaned = 0.00145746 Jy
! Component: 150  -  total flux cleaned = 0.001962 Jy
! Component: 200  -  total flux cleaned = 0.00242654 Jy
! Total flux subtracted in 200 components = 0.00242654 Jy
! Clean residual min=-0.005046 max=0.005095 Jy/beam
! Clean residual mean=-0.000002 rms=0.001302 Jy/beam
! Combined flux in latest and established models = 0.456309 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 99 components and 0.456309 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.094 mas, bmaj=3.44 mas, bpa=-18.24 degrees
! Estimated noise=2.23611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.25652e-05 Jy
! Component: 100  -  total flux cleaned = 0.000466324 Jy
! Component: 150  -  total flux cleaned = 0.000789388 Jy
! Component: 200  -  total flux cleaned = 0.00108904 Jy
! Total flux subtracted in 200 components = 0.00108904 Jy
! Clean residual min=-0.005134 max=0.005236 Jy/beam
! Clean residual mean=-0.000001 rms=0.001080 Jy/beam
! Combined flux in latest and established models = 0.457398 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 112 components and 0.457398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106222Jy  sigma=0.303916
! Fit after  self-cal, rms=0.106241Jy  sigma=0.303849
wmodel /scr/pima/rdv94_uvs/J0527+0331_X_map.mod
! Writing 112 model components to file: /scr/pima/rdv94_uvs/J0527+0331_X_map.mod
wobs /scr/pima/rdv94_uvs/J0527+0331_X_uvs.fits
! Writing UV FITS file: /scr/pima/rdv94_uvs/J0527+0331_X_uvs.fits
wwins /scr/pima/rdv94_uvs/J0527+0331_X_map.win
! wwins: Wrote 2 windows to /scr/pima/rdv94_uvs/J0527+0331_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00083373 Jy
! Component: 100  -  total flux cleaned = 0.00130573 Jy
! Component: 150  -  total flux cleaned = 0.00159433 Jy
! Component: 200  -  total flux cleaned = 0.00179891 Jy
! Component: 250  -  total flux cleaned = 0.00192974 Jy
! Component: 300  -  total flux cleaned = 0.00174182 Jy
! Component: 350  -  total flux cleaned = 0.00168151 Jy
! Component: 400  -  total flux cleaned = 0.00168107 Jy
! Component: 450  -  total flux cleaned = 0.00162435 Jy
! Component: 500  -  total flux cleaned = 0.00168095 Jy
! Component: 550  -  total flux cleaned = 0.00156877 Jy
! Component: 600  -  total flux cleaned = 0.00118907 Jy
! Component: 650  -  total flux cleaned = 0.00124416 Jy
! Component: 700  -  total flux cleaned = 0.00108708 Jy
! Component: 750  -  total flux cleaned = 0.000932617 Jy
! Component: 800  -  total flux cleaned = 0.000678676 Jy
! Component: 850  -  total flux cleaned = 0.000528846 Jy
! Component: 900  -  total flux cleaned = 0.000527722 Jy
! Component: 950  -  total flux cleaned = 0.000380603 Jy
! Component: 1000  -  total flux cleaned = 0.000380834 Jy
! Component: 1050  -  total flux cleaned = 0.000285649 Jy
! Component: 1100  -  total flux cleaned = 0.00023845 Jy
! Component: 1150  -  total flux cleaned = 0.000285028 Jy
! Component: 1200  -  total flux cleaned = 0.000332291 Jy
! Component: 1250  -  total flux cleaned = 0.000469239 Jy
! Component: 1300  -  total flux cleaned = 0.000558875 Jy
! Component: 1350  -  total flux cleaned = 0.000558457 Jy
! Component: 1400  -  total flux cleaned = 0.000646498 Jy
! Component: 1450  -  total flux cleaned = 0.000646044 Jy
! Component: 1500  -  total flux cleaned = 0.000689366 Jy
! Component: 1550  -  total flux cleaned = 0.000944764 Jy
! Component: 1600  -  total flux cleaned = 0.000860259 Jy
! Component: 1650  -  total flux cleaned = 0.000943883 Jy
! Component: 1700  -  total flux cleaned = 0.00110963 Jy
! Component: 1750  -  total flux cleaned = 0.00127329 Jy
! Component: 1800  -  total flux cleaned = 0.00115078 Jy
! Component: 1850  -  total flux cleaned = 0.00127145 Jy
! Component: 1900  -  total flux cleaned = 0.00131187 Jy
! Component: 1950  -  total flux cleaned = 0.00135148 Jy
! Component: 2000  -  total flux cleaned = 0.00142996 Jy
! Component: 2050  -  total flux cleaned = 0.00154725 Jy
! Component: 2100  -  total flux cleaned = 0.00170172 Jy
! Component: 2150  -  total flux cleaned = 0.00150961 Jy
! Component: 2200  -  total flux cleaned = 0.00150915 Jy
! Component: 2250  -  total flux cleaned = 0.00143367 Jy
! Component: 2300  -  total flux cleaned = 0.00154621 Jy
! Component: 2350  -  total flux cleaned = 0.00150878 Jy
! Component: 2400  -  total flux cleaned = 0.00154549 Jy
! Component: 2450  -  total flux cleaned = 0.00172895 Jy
! Component: 2500  -  total flux cleaned = 0.00176503 Jy
! Component: 2550  -  total flux cleaned = 0.00183759 Jy
! Component: 2600  -  total flux cleaned = 0.00180157 Jy
! Component: 2650  -  total flux cleaned = 0.00187243 Jy
! Component: 2700  -  total flux cleaned = 0.00183705 Jy
! Component: 2750  -  total flux cleaned = 0.00197732 Jy
! Component: 2800  -  total flux cleaned = 0.00201238 Jy
! Component: 2850  -  total flux cleaned = 0.00218518 Jy
! Component: 2900  -  total flux cleaned = 0.00204752 Jy
! Component: 2950  -  total flux cleaned = 0.00204768 Jy
! Component: 3000  -  total flux cleaned = 0.0023194 Jy
! Component: 3050  -  total flux cleaned = 0.00231932 Jy
! Component: 3100  -  total flux cleaned = 0.00228548 Jy
! Component: 3150  -  total flux cleaned = 0.00248555 Jy
! Component: 3200  -  total flux cleaned = 0.00238624 Jy
! Component: 3250  -  total flux cleaned = 0.00241909 Jy
! Component: 3300  -  total flux cleaned = 0.00254982 Jy
! Component: 3350  -  total flux cleaned = 0.00258241 Jy
! Component: 3400  -  total flux cleaned = 0.0026797 Jy
! Component: 3450  -  total flux cleaned = 0.00271188 Jy
! Component: 3500  -  total flux cleaned = 0.00280748 Jy
! Component: 3550  -  total flux cleaned = 0.00287066 Jy
! Component: 3600  -  total flux cleaned = 0.00293388 Jy
! Component: 3650  -  total flux cleaned = 0.00293382 Jy
! Component: 3700  -  total flux cleaned = 0.00290253 Jy
! Component: 3750  -  total flux cleaned = 0.00299536 Jy
! Component: 3800  -  total flux cleaned = 0.00290281 Jy
! Component: 3850  -  total flux cleaned = 0.0029947 Jy
! Component: 3900  -  total flux cleaned = 0.00305564 Jy
! Component: 3950  -  total flux cleaned = 0.00308638 Jy
! Component: 4000  -  total flux cleaned = 0.00314688 Jy
! Component: 4050  -  total flux cleaned = 0.00323667 Jy
! Total flux subtracted in 4096 components = 0.00320684 Jy
! Clean residual min=-0.001858 max=0.002053 Jy/beam
! Clean residual mean=0.000000 rms=0.000561 Jy/beam
! Combined flux in latest and established models = 0.460605 Jy
keep
! Adding 319 model components to the UV plane model.
! The established model now contains 430 components and 0.460605 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rdv94_uvs/J0527+0331_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.094 x 3.44 at -18.24 degrees (North through East)
! Clean map  min=-0.0030801  max=0.41794 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J0527+0331_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.417941 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000559751 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.401792 0.401792 0.803583 1.60717 3.21433 6.42866 12.8573 25.7147 51.4293
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.417 
quit
! Quitting program
! Log file /scr/pima/rdv94_uvs/J0527+0331_X_uvs.log closed on Mon Sep 23 22:08:48 2013