! Started logfile: /scr/pima/rdv94_uvs/J0527+0331_S_uvs.log on Mon Sep 23 22:08:57 2013
obs /scr/pima/rdv94_uvs/J0527+0331_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv94_uvs/J0527+0331_S_uva.fits
! AN table 1: 19 integrations on 15 of 15 possible baselines.
! AN table 2: 103 integrations on 28 of 28 possible baselines.
! AN table 3: 74 integrations on 36 of 36 possible baselines.
! AN table 4: 18 integrations on 15 of 15 possible baselines.
! AN table 5: 22 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.481917 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0527+0331
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09      1.6e+07          1      1.6e+07
!  02        2  2.26693e+09      1.6e+07          1      1.6e+07
!  03        3  2.35693e+09      1.6e+07          1      1.6e+07
!  04        4  2.37693e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 12952 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J0527+0331_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 450 telescope corrections were flagged in sub-array 2.
!  A total of 397 telescope corrections were flagged in sub-array 3.
!  A total of 35 telescope corrections were flagged in sub-array 4.
!  A total of 43 telescope corrections were flagged in sub-array 5.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 450 telescope corrections were flagged in sub-array 2.
!  A total of 397 telescope corrections were flagged in sub-array 3.
!  A total of 35 telescope corrections were flagged in sub-array 4.
!  A total of 43 telescope corrections were flagged in sub-array 5.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 450 telescope corrections were flagged in sub-array 2.
!  A total of 397 telescope corrections were flagged in sub-array 3.
!  A total of 35 telescope corrections were flagged in sub-array 4.
!  A total of 43 telescope corrections were flagged in sub-array 5.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 450 telescope corrections were flagged in sub-array 2.
!  A total of 397 telescope corrections were flagged in sub-array 3.
!  A total of 35 telescope corrections were flagged in sub-array 4.
!  A total of 43 telescope corrections were flagged in sub-array 5.
! 
! Fit before self-cal, rms=1.008761Jy  sigma=2.182275
! Fit after  self-cal, rms=0.697248Jy  sigma=1.507408
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.771 mas, bmaj=11.37 mas, bpa=-18.6 degrees
! Estimated noise=4.96514 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.24196 Jy
! Component: 100  -  total flux cleaned = 0.30392 Jy
! Total flux subtracted in 100 components = 0.30392 Jy
! Clean residual min=-0.010051 max=0.024738 Jy/beam
! Clean residual mean=0.000003 rms=0.002818 Jy/beam
! Combined flux in latest and established models = 0.30392 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.30392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.125090Jy  sigma=0.271572
! Fit after  self-cal, rms=0.125131Jy  sigma=0.271555
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0248092 Jy
! Component: 100  -  total flux cleaned = 0.0358883 Jy
! Total flux subtracted in 100 components = 0.0358883 Jy
! Clean residual min=-0.008013 max=0.008830 Jy/beam
! Clean residual mean=-0.000010 rms=0.002173 Jy/beam
! Combined flux in latest and established models = 0.339808 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 0.339808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120278Jy  sigma=0.258589
! Fit after  self-cal, rms=0.120318Jy  sigma=0.258574
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.57 mas, bmaj=12.37 mas, bpa=-17.91 degrees
! Estimated noise=3.18169 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00750481 Jy
! Component: 100  -  total flux cleaned = 0.0113817 Jy
! Component: 150  -  total flux cleaned = 0.013565 Jy
! Component: 200  -  total flux cleaned = 0.0142379 Jy
! Total flux subtracted in 200 components = 0.0142379 Jy
! Clean residual min=-0.007609 max=0.008261 Jy/beam
! Clean residual mean=-0.000021 rms=0.002060 Jy/beam
! Combined flux in latest and established models = 0.354046 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 40 components and 0.354046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.119911Jy  sigma=0.257321
! Fit after  self-cal, rms=0.119928Jy  sigma=0.257308
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     KP        1.08     LA        1.44     MK        1.02     
!   OV        0.98     PT        1.07     
! 
!  A total of 15 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     HN        1.01     KP        1.05     
!   LA        1.30     NL        0.98     OV        0.99     WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.93     FD        1.01     HN        1.06     KP        1.01     
!   LA        1.29     MK        0.92     NL        0.99     OV        0.95     
!   WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   KP        1.07     LA        1.35     MK        0.98     NL        0.97     
!   OV        1.00     PT        1.06     
! 
!  A total of 9 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.04     HN        1.02     KP        1.06     LA        1.27     
!   MK        0.98     NL        0.99     OV        0.96     PT        1.03     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     KP        1.06     LA        1.31     MK        0.98     
!   OV        1.06     PT        1.05     
! 
!  A total of 15 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        1.09     HN        1.06     KP        1.05     
!   LA        1.17     NL        1.02     OV        1.02     WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.04     FD        1.07     HN        1.09     KP        1.02     
!   LA        1.17     MK        1.04     NL        1.00     OV        1.03     
!   WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   KP        1.04     LA        1.17     MK        1.14     NL        1.02     
!   OV        1.04     PT        1.10     
! 
!  A total of 9 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.04     HN        1.09     KP        1.03     LA        1.16     
!   MK        1.10     NL        1.01     OV        1.01     PT        1.04     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     KP        0.95     LA        0.99     MK        0.99     
!   OV        0.99     PT        1.16     
! 
!  A total of 15 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        1.07     HN        1.00     KP        0.91     
!   LA        0.98     NL        1.11     OV        1.04     WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.04     FD        1.09     HN        1.03     KP        0.87     
!   LA        0.95     MK        1.02     NL        1.08     OV        1.01     
!   WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   KP        0.94     LA        0.95     MK        1.12     NL        1.05     
!   OV        1.03     PT        1.05     
! 
!  A total of 9 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.10     HN        1.00     KP        0.90     LA        0.99     
!   MK        1.02     NL        1.07     OV        1.04     PT        1.09     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     KP        0.82     LA        0.85     MK        1.15     
!   OV        0.95     PT        1.03     
! 
!  A total of 15 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.11     FD        1.06     HN        0.93     KP        0.84     
!   LA        0.77     NL        0.99     OV        0.89     WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.78     FD        0.98     HN        0.88     KP        0.87     
!   LA        0.71     MK        1.15     NL        0.98     OV        0.94     
!   WF        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 4.
!  Telescope amplitude corrections in sub-array 4:
!   KP        0.84     LA        0.81     MK        1.23     NL        1.01     
!   OV        0.89     PT        0.98     
! 
!  A total of 9 telescope corrections were flagged in sub-array 5.
!  Telescope amplitude corrections in sub-array 5:
!   BR        1.00     HN        0.93     KP        0.82     LA        0.77     
!   MK        1.11     NL        1.01     OV        0.87     PT        0.97     
! 
! 
! Fit before self-cal, rms=0.119928Jy  sigma=0.257308
! Fit after  self-cal, rms=0.106159Jy  sigma=0.222512
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.611 mas, bmaj=12.32 mas, bpa=-17.66 degrees
! Estimated noise=3.19785 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00154673 Jy
! Component: 100  -  total flux cleaned = 0.00172945 Jy
! Component: 150  -  total flux cleaned = 0.00158758 Jy
! Component: 200  -  total flux cleaned = 0.00150337 Jy
! Total flux subtracted in 200 components = 0.00150337 Jy
! Clean residual min=-0.004204 max=0.003646 Jy/beam
! Clean residual mean=-0.000012 rms=0.000988 Jy/beam
! Combined flux in latest and established models = 0.35555 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 54 components and 0.35555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106080Jy  sigma=0.222426
! Fit after  self-cal, rms=0.106261Jy  sigma=0.222300
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106261Jy  sigma=0.222300
! Fit after  self-cal, rms=0.106354Jy  sigma=0.222285
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.609 mas, bmaj=12.31 mas, bpa=-17.64 degrees
! Estimated noise=3.19905 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010502 Jy
! Component: 100  -  total flux cleaned = 0.00112631 Jy
! Component: 150  -  total flux cleaned = 0.0011606 Jy
! Component: 200  -  total flux cleaned = 0.00119229 Jy
! Total flux subtracted in 200 components = 0.00119229 Jy
! Clean residual min=-0.004110 max=0.003649 Jy/beam
! Clean residual mean=-0.000012 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 0.356742 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 58 components and 0.356742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106318Jy  sigma=0.222247
! Fit after  self-cal, rms=0.106324Jy  sigma=0.222247
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.32939e-05 Jy
! Component: 100  -  total flux cleaned = 3.27885e-05 Jy
! Component: 150  -  total flux cleaned = 5.96079e-05 Jy
! Component: 200  -  total flux cleaned = 5.89299e-05 Jy
! Total flux subtracted in 200 components = 5.89299e-05 Jy
! Clean residual min=-0.004077 max=0.003633 Jy/beam
! Clean residual mean=-0.000012 rms=0.000978 Jy/beam
! Combined flux in latest and established models = 0.356801 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 64 components and 0.356801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106308Jy  sigma=0.222224
! Fit after  self-cal, rms=0.106311Jy  sigma=0.222223
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106311Jy  sigma=0.222223
! Fit after  self-cal, rms=0.105858Jy  sigma=0.221643
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.613 mas, bmaj=12.3 mas, bpa=-17.63 degrees
! Estimated noise=3.19788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000190339 Jy
! Component: 100  -  total flux cleaned = 0.000262776 Jy
! Component: 150  -  total flux cleaned = 0.000284962 Jy
! Component: 200  -  total flux cleaned = 0.000305574 Jy
! Total flux subtracted in 200 components = 0.000305574 Jy
! Clean residual min=-0.003866 max=0.003701 Jy/beam
! Clean residual mean=-0.000006 rms=0.000948 Jy/beam
! Combined flux in latest and established models = 0.357106 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 70 components and 0.357106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105846Jy  sigma=0.221621
! Fit after  self-cal, rms=0.105851Jy  sigma=0.221618
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.07555e-05 Jy
! Component: 100  -  total flux cleaned = 3.05596e-05 Jy
! Component: 150  -  total flux cleaned = 4.8904e-05 Jy
! Component: 200  -  total flux cleaned = 4.90501e-05 Jy
! Total flux subtracted in 200 components = 4.90501e-05 Jy
! Clean residual min=-0.003850 max=0.003691 Jy/beam
! Clean residual mean=-0.000006 rms=0.000947 Jy/beam
! Combined flux in latest and established models = 0.357155 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 76 components and 0.357155 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105842Jy  sigma=0.221608
! Fit after  self-cal, rms=0.105845Jy  sigma=0.221607
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105845Jy  sigma=0.221607
! Fit after  self-cal, rms=0.105844Jy  sigma=0.221604
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.363 mas, bmaj=12.98 mas, bpa=-15.12 degrees
! Estimated noise=3.4214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.93557e-05 Jy
! Component: 100  -  total flux cleaned = 2.90365e-05 Jy
! Component: 150  -  total flux cleaned = 7.81846e-05 Jy
! Component: 200  -  total flux cleaned = 0.000110679 Jy
! Total flux subtracted in 200 components = 0.000110679 Jy
! Clean residual min=-0.004136 max=0.003580 Jy/beam
! Clean residual mean=-0.000009 rms=0.001048 Jy/beam
! Combined flux in latest and established models = 0.357266 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 85 components and 0.357266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105845Jy  sigma=0.221593
! Fit after  self-cal, rms=0.105844Jy  sigma=0.221591
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.17935e-07 Jy
! Component: 100  -  total flux cleaned = 7.72557e-06 Jy
! Component: 150  -  total flux cleaned = 2.144e-05 Jy
! Component: 200  -  total flux cleaned = 2.8059e-05 Jy
! Total flux subtracted in 200 components = 2.8059e-05 Jy
! Clean residual min=-0.004147 max=0.003564 Jy/beam
! Clean residual mean=-0.000009 rms=0.001046 Jy/beam
! Combined flux in latest and established models = 0.357294 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 89 components and 0.357294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105845Jy  sigma=0.221591
! Fit after  self-cal, rms=0.105844Jy  sigma=0.221591
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.617 mas, bmaj=12.3 mas, bpa=-17.62 degrees
! Estimated noise=3.19663 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.617 x 12.3 at -17.62 degrees (North through East)
! Clean map  min=-0.0037752  max=0.31845 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.795 mas, bmaj=11.42 mas, bpa=-18.28 degrees
! Estimated noise=5.04381 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.244315 Jy
! Component: 100  -  total flux cleaned = 0.306142 Jy
! Component: 150  -  total flux cleaned = 0.330971 Jy
! Component: 200  -  total flux cleaned = 0.341763 Jy
! Total flux subtracted in 200 components = 0.341763 Jy
! Clean residual min=-0.005004 max=0.004990 Jy/beam
! Clean residual mean=0.000004 rms=0.001284 Jy/beam
! Combined flux in latest and established models = 0.341764 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.341764 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.617 mas, bmaj=12.3 mas, bpa=-17.62 degrees
! Estimated noise=3.19663 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00574815 Jy
! Component: 100  -  total flux cleaned = 0.00944341 Jy
! Component: 150  -  total flux cleaned = 0.0119224 Jy
! Component: 200  -  total flux cleaned = 0.0135926 Jy
! Total flux subtracted in 200 components = 0.0135926 Jy
! Clean residual min=-0.004132 max=0.003505 Jy/beam
! Clean residual mean=-0.000006 rms=0.000981 Jy/beam
! Combined flux in latest and established models = 0.355356 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 40 components and 0.355356 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.363 mas, bmaj=12.98 mas, bpa=-15.12 degrees
! Estimated noise=3.4214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000600583 Jy
! Component: 100  -  total flux cleaned = 0.000934079 Jy
! Component: 150  -  total flux cleaned = 0.00119248 Jy
! Component: 200  -  total flux cleaned = 0.00135708 Jy
! Total flux subtracted in 200 components = 0.00135708 Jy
! Clean residual min=-0.004260 max=0.003629 Jy/beam
! Clean residual mean=-0.000009 rms=0.001055 Jy/beam
! Combined flux in latest and established models = 0.356713 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000118089 Jy
! Component: 100  -  total flux cleaned = 0.000148124 Jy
! Component: 150  -  total flux cleaned = 0.000162681 Jy
! Component: 200  -  total flux cleaned = 0.000175813 Jy
! Total flux subtracted in 200 components = 0.000175813 Jy
! Clean residual min=-0.004230 max=0.003635 Jy/beam
! Clean residual mean=-0.000009 rms=0.001054 Jy/beam
! Combined flux in latest and established models = 0.356889 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 68 components and 0.356889 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.617 mas, bmaj=12.3 mas, bpa=-17.62 degrees
! Estimated noise=3.19663 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000101402 Jy
! Component: 100  -  total flux cleaned = 5.83614e-05 Jy
! Component: 150  -  total flux cleaned = 5.89166e-05 Jy
! Component: 200  -  total flux cleaned = 9.62684e-05 Jy
! Total flux subtracted in 200 components = 9.62684e-05 Jy
! Clean residual min=-0.003968 max=0.003550 Jy/beam
! Clean residual mean=-0.000006 rms=0.000964 Jy/beam
! Combined flux in latest and established models = 0.356985 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 83 components and 0.356985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105937Jy  sigma=0.221735
! Fit after  self-cal, rms=0.105932Jy  sigma=0.221731
wmodel /scr/pima/rdv94_uvs/J0527+0331_S_map.mod
! Writing 83 model components to file: /scr/pima/rdv94_uvs/J0527+0331_S_map.mod
wobs /scr/pima/rdv94_uvs/J0527+0331_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv94_uvs/J0527+0331_S_uvs.fits
wwins /scr/pima/rdv94_uvs/J0527+0331_S_map.win
! wwins: Wrote 1 windows to /scr/pima/rdv94_uvs/J0527+0331_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00135035 Jy
! Component: 100  -  total flux cleaned = -0.00218716 Jy
! Component: 150  -  total flux cleaned = -0.00278908 Jy
! Component: 200  -  total flux cleaned = -0.0032454 Jy
! Component: 250  -  total flux cleaned = -0.00351956 Jy
! Component: 300  -  total flux cleaned = -0.00383747 Jy
! Component: 350  -  total flux cleaned = -0.00399156 Jy
! Component: 400  -  total flux cleaned = -0.00414108 Jy
! Component: 450  -  total flux cleaned = -0.00428692 Jy
! Component: 500  -  total flux cleaned = -0.00442816 Jy
! Component: 550  -  total flux cleaned = -0.00447405 Jy
! Component: 600  -  total flux cleaned = -0.00442882 Jy
! Component: 650  -  total flux cleaned = -0.00456221 Jy
! Component: 700  -  total flux cleaned = -0.00447452 Jy
! Component: 750  -  total flux cleaned = -0.0044317 Jy
! Component: 800  -  total flux cleaned = -0.00438849 Jy
! Component: 850  -  total flux cleaned = -0.00430367 Jy
! Component: 900  -  total flux cleaned = -0.0042214 Jy
! Component: 950  -  total flux cleaned = -0.00418085 Jy
! Component: 1000  -  total flux cleaned = -0.00430026 Jy
! Component: 1050  -  total flux cleaned = -0.00410312 Jy
! Component: 1100  -  total flux cleaned = -0.0040264 Jy
! Component: 1150  -  total flux cleaned = -0.00391165 Jy
! Component: 1200  -  total flux cleaned = -0.00383643 Jy
! Component: 1250  -  total flux cleaned = -0.00387292 Jy
! Component: 1300  -  total flux cleaned = -0.00368877 Jy
! Component: 1350  -  total flux cleaned = -0.00350785 Jy
! Component: 1400  -  total flux cleaned = -0.00347177 Jy
! Component: 1450  -  total flux cleaned = -0.00329452 Jy
! Component: 1500  -  total flux cleaned = -0.00312018 Jy
! Component: 1550  -  total flux cleaned = -0.00291418 Jy
! Component: 1600  -  total flux cleaned = -0.00284698 Jy
! Component: 1650  -  total flux cleaned = -0.00274612 Jy
! Component: 1700  -  total flux cleaned = -0.00261332 Jy
! Component: 1750  -  total flux cleaned = -0.00241639 Jy
! Component: 1800  -  total flux cleaned = -0.00228631 Jy
! Component: 1850  -  total flux cleaned = -0.00212538 Jy
! Component: 1900  -  total flux cleaned = -0.00190334 Jy
! Component: 1950  -  total flux cleaned = -0.00184077 Jy
! Component: 2000  -  total flux cleaned = -0.00171673 Jy
! Component: 2050  -  total flux cleaned = -0.00159371 Jy
! Component: 2100  -  total flux cleaned = -0.00144159 Jy
! Component: 2150  -  total flux cleaned = -0.00138148 Jy
! Component: 2200  -  total flux cleaned = -0.0012624 Jy
! Component: 2250  -  total flux cleaned = -0.00105642 Jy
! Component: 2300  -  total flux cleaned = -0.000998084 Jy
! Component: 2350  -  total flux cleaned = -0.000911055 Jy
! Component: 2400  -  total flux cleaned = -0.000739643 Jy
! Component: 2450  -  total flux cleaned = -0.000626634 Jy
! Component: 2500  -  total flux cleaned = -0.000570862 Jy
! Component: 2550  -  total flux cleaned = -0.000571127 Jy
! Component: 2600  -  total flux cleaned = -0.000405946 Jy
! Component: 2650  -  total flux cleaned = -0.00043305 Jy
! Component: 2700  -  total flux cleaned = -0.000352278 Jy
! Component: 2750  -  total flux cleaned = -0.000325254 Jy
! Component: 2800  -  total flux cleaned = -0.000166419 Jy
! Component: 2850  -  total flux cleaned = -0.00021933 Jy
! Component: 2900  -  total flux cleaned = -0.000193468 Jy
! Component: 2950  -  total flux cleaned = -3.86196e-05 Jy
! Component: 3000  -  total flux cleaned = -0.000166584 Jy
! Component: 3050  -  total flux cleaned = -1.45569e-05 Jy
! Component: 3100  -  total flux cleaned = -3.97295e-05 Jy
! Component: 3150  -  total flux cleaned = 3.55336e-05 Jy
! Component: 3200  -  total flux cleaned = 6.06353e-05 Jy
! Component: 3250  -  total flux cleaned = 8.54053e-05 Jy
! Component: 3300  -  total flux cleaned = 0.000207062 Jy
! Component: 3350  -  total flux cleaned = 0.000327705 Jy
! Component: 3400  -  total flux cleaned = 0.000231759 Jy
! Component: 3450  -  total flux cleaned = 0.000350385 Jy
! Component: 3500  -  total flux cleaned = 0.000468011 Jy
! Component: 3550  -  total flux cleaned = 0.000514894 Jy
! Component: 3600  -  total flux cleaned = 0.000631191 Jy
! Component: 3650  -  total flux cleaned = 0.000700531 Jy
! Component: 3700  -  total flux cleaned = 0.000815245 Jy
! Component: 3750  -  total flux cleaned = 0.000883542 Jy
! Component: 3800  -  total flux cleaned = 0.000973765 Jy
! Component: 3850  -  total flux cleaned = 0.000973737 Jy
! Component: 3900  -  total flux cleaned = 0.00106302 Jy
! Component: 3950  -  total flux cleaned = 0.00117358 Jy
! Component: 4000  -  total flux cleaned = 0.00134972 Jy
! Component: 4050  -  total flux cleaned = 0.0013931 Jy
! Total flux subtracted in 4096 components = 0.00147989 Jy
! Clean residual min=-0.001219 max=0.001379 Jy/beam
! Clean residual mean=-0.000003 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.358465 Jy
keep
! Adding 328 model components to the UV plane model.
! The established model now contains 411 components and 0.358465 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rdv94_uvs/J0527+0331_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.617 x 12.3 at -17.62 degrees (North through East)
! Clean map  min=-0.0028673  max=0.31814 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J0527+0331_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.318136 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000437117 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.412199 0.412199 0.824397 1.64879 3.29759 6.59518 13.1904 26.3807 52.7614
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0013 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.318 
quit
! Quitting program
! Log file /scr/pima/rdv94_uvs/J0527+0331_S_uvs.log closed on Mon Sep 23 22:09:02 2013