! Started logfile: /scr/pima/rdv94_uvs/J0322-1312_X_uvs.log on Mon Sep 23 22:07:57 2013 obs /scr/pima/rdv94_uvs/J0322-1312_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv94_uvs/J0322-1312_X_uva.fits ! AN table 1: 178 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.992777 visibilities/baseline/integration-bin. ! Found source: J0322-1312 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47993e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79493e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89993e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 19792 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J0322-1312_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.014674Jy sigma=0.402990 ! Fit after self-cal, rms=0.934616Jy sigma=0.371452 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7149 mas, bmaj=3.183 mas, bpa=-18.27 degrees ! Estimated noise=23.092 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0557472 Jy ! Component: 100 - total flux cleaned = 0.0680651 Jy ! Total flux subtracted in 100 components = 0.0680651 Jy ! Clean residual min=-0.005210 max=0.004750 Jy/beam ! Clean residual mean=0.000005 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.0680651 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0680651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112409Jy sigma=0.041693 ! Fit after self-cal, rms=0.110920Jy sigma=0.041067 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9013 mas, bmaj=3.381 mas, bpa=-17 degrees ! Estimated noise=12.8467 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0058075 Jy ! Component: 100 - total flux cleaned = 0.00823709 Jy ! Component: 150 - total flux cleaned = 0.00916427 Jy ! Component: 200 - total flux cleaned = 0.0092831 Jy ! Total flux subtracted in 200 components = 0.0092831 Jy ! Clean residual min=-0.003482 max=0.003178 Jy/beam ! Clean residual mean=0.000010 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.0773482 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 20 components and 0.0773482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110630Jy sigma=0.040955 ! Fit after self-cal, rms=0.110626Jy sigma=0.040941 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.90 KP 1.05 ! LA 1.06 MK 1.04 NL 0.98 OV 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.43 FD 0.99 HN 0.95 KP 0.97 ! LA 1.02 MK 1.03 NL 1.00 OV 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.91 HN 0.92 KP 0.92 ! LA 1.04 MK 0.97 NL 1.04 OV 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.89 HN 0.85 KP 0.96 ! LA 0.98 MK 0.96 NL 1.05 OV 1.06 ! ! ! Fit before self-cal, rms=0.110626Jy sigma=0.040941 ! Fit after self-cal, rms=0.105784Jy sigma=0.040819 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8917 mas, bmaj=3.394 mas, bpa=-16.81 degrees ! Estimated noise=12.7089 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00060189 Jy ! Component: 100 - total flux cleaned = 0.000694509 Jy ! Component: 150 - total flux cleaned = 0.000798102 Jy ! Component: 200 - total flux cleaned = 0.000908711 Jy ! Total flux subtracted in 200 components = 0.000908711 Jy ! Clean residual min=-0.003302 max=0.003507 Jy/beam ! Clean residual mean=0.000009 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.0782569 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.0782569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105764Jy sigma=0.040812 ! Fit after self-cal, rms=0.105735Jy sigma=0.040792 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105735Jy sigma=0.040792 ! Fit after self-cal, rms=0.105311Jy sigma=0.040760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.891 mas, bmaj=3.386 mas, bpa=-16.85 degrees ! Estimated noise=12.6858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000231948 Jy ! Component: 100 - total flux cleaned = 0.000462236 Jy ! Component: 150 - total flux cleaned = 0.000598892 Jy ! Component: 200 - total flux cleaned = 0.000736467 Jy ! Total flux subtracted in 200 components = 0.000736467 Jy ! Clean residual min=-0.003273 max=0.003436 Jy/beam ! Clean residual mean=0.000007 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.0789934 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 39 components and 0.0789934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105298Jy sigma=0.040755 ! Fit after self-cal, rms=0.105308Jy sigma=0.040738 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21, 42.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029181 Jy ! Component: 100 - total flux cleaned = 0.00370146 Jy ! Component: 150 - total flux cleaned = 0.00427445 Jy ! Component: 200 - total flux cleaned = 0.0045478 Jy ! Total flux subtracted in 200 components = 0.0045478 Jy ! Clean residual min=-0.003166 max=0.002273 Jy/beam ! Clean residual mean=0.000006 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0835412 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 65 components and 0.0835412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105219Jy sigma=0.040701 ! Fit after self-cal, rms=0.105233Jy sigma=0.040689 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105233Jy sigma=0.040689 ! Fit after self-cal, rms=0.105005Jy sigma=0.040685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8919 mas, bmaj=3.383 mas, bpa=-16.83 degrees ! Estimated noise=12.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145715 Jy ! Component: 100 - total flux cleaned = 0.0020621 Jy ! Component: 150 - total flux cleaned = 0.00226206 Jy ! Component: 200 - total flux cleaned = 0.00239742 Jy ! Total flux subtracted in 200 components = 0.00239742 Jy ! Clean residual min=-0.003124 max=0.002222 Jy/beam ! Clean residual mean=0.000006 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.0859386 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 78 components and 0.0859386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104961Jy sigma=0.040667 ! Fit after self-cal, rms=0.104986Jy sigma=0.040662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000737075 Jy ! Component: 100 - total flux cleaned = 0.00088468 Jy ! Component: 150 - total flux cleaned = 0.000978989 Jy ! Component: 200 - total flux cleaned = 0.00106335 Jy ! Total flux subtracted in 200 components = 0.00106335 Jy ! Clean residual min=-0.003083 max=0.002293 Jy/beam ! Clean residual mean=0.000006 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.0870019 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 85 components and 0.0870019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104963Jy sigma=0.040653 ! Fit after self-cal, rms=0.104957Jy sigma=0.040650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104957Jy sigma=0.040650 ! Fit after self-cal, rms=0.105054Jy sigma=0.040648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.039 mas, bmaj=4.217 mas, bpa=-2.054 degrees ! Estimated noise=15.4954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00095438 Jy ! Component: 100 - total flux cleaned = 0.00117459 Jy ! Component: 150 - total flux cleaned = 0.00114958 Jy ! Component: 200 - total flux cleaned = 0.0010671 Jy ! Total flux subtracted in 200 components = 0.0010671 Jy ! Clean residual min=-0.003015 max=0.002792 Jy/beam ! Clean residual mean=0.000010 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.088069 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 100 components and 0.088069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105049Jy sigma=0.040646 ! Fit after self-cal, rms=0.105047Jy sigma=0.040636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000560152 Jy ! Component: 100 - total flux cleaned = 0.000609043 Jy ! Component: 150 - total flux cleaned = 0.000571192 Jy ! Component: 200 - total flux cleaned = 0.000555622 Jy ! Total flux subtracted in 200 components = 0.000555622 Jy ! Clean residual min=-0.002984 max=0.002896 Jy/beam ! Clean residual mean=0.000010 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.0886247 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 113 components and 0.0886247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105047Jy sigma=0.040636 ! Fit after self-cal, rms=0.105041Jy sigma=0.040634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8926 mas, bmaj=3.385 mas, bpa=-16.82 degrees ! Estimated noise=12.6554 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8926 x 3.385 at -16.82 degrees (North through East) ! Clean map min=-0.002771 max=0.073479 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7074 mas, bmaj=3.196 mas, bpa=-18.17 degrees ! Estimated noise=22.4255 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0559548 Jy ! Component: 100 - total flux cleaned = 0.0689771 Jy ! Component: 150 - total flux cleaned = 0.0745348 Jy ! Component: 200 - total flux cleaned = 0.0767179 Jy ! Total flux subtracted in 200 components = 0.0767179 Jy ! Clean residual min=-0.004620 max=0.004465 Jy/beam ! Clean residual mean=0.000003 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.0767179 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0767179 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8926 mas, bmaj=3.385 mas, bpa=-16.82 degrees ! Estimated noise=12.6554 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00416019 Jy ! Component: 100 - total flux cleaned = 0.00586021 Jy ! Component: 150 - total flux cleaned = 0.00691681 Jy ! Component: 200 - total flux cleaned = 0.00789867 Jy ! Total flux subtracted in 200 components = 0.00789867 Jy ! Clean residual min=-0.003351 max=0.002490 Jy/beam ! Clean residual mean=0.000006 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0846165 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 45 components and 0.0846165 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.039 mas, bmaj=4.217 mas, bpa=-2.054 degrees ! Estimated noise=15.4954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164506 Jy ! Component: 100 - total flux cleaned = 0.00238157 Jy ! Component: 150 - total flux cleaned = 0.0025896 Jy ! Component: 200 - total flux cleaned = 0.00281687 Jy ! Total flux subtracted in 200 components = 0.00281687 Jy ! Clean residual min=-0.003118 max=0.003045 Jy/beam ! Clean residual mean=0.000010 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.0874334 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000189199 Jy ! Component: 100 - total flux cleaned = 0.000330724 Jy ! Component: 150 - total flux cleaned = 0.000480081 Jy ! Component: 200 - total flux cleaned = 0.000596559 Jy ! Total flux subtracted in 200 components = 0.000596559 Jy ! Clean residual min=-0.003017 max=0.002993 Jy/beam ! Clean residual mean=0.000009 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.08803 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 94 components and 0.08803 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8926 mas, bmaj=3.385 mas, bpa=-16.82 degrees ! Estimated noise=12.6554 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000230863 Jy ! Component: 100 - total flux cleaned = 0.000324372 Jy ! Component: 150 - total flux cleaned = 0.00057864 Jy ! Component: 200 - total flux cleaned = 0.000804132 Jy ! Total flux subtracted in 200 components = 0.000804132 Jy ! Clean residual min=-0.002844 max=0.002209 Jy/beam ! Clean residual mean=0.000005 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.0888341 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 106 components and 0.0888341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105040Jy sigma=0.040636 ! Fit after self-cal, rms=0.105050Jy sigma=0.040633 wmodel /scr/pima/rdv94_uvs/J0322-1312_X_map.mod ! Writing 106 model components to file: /scr/pima/rdv94_uvs/J0322-1312_X_map.mod wobs /scr/pima/rdv94_uvs/J0322-1312_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv94_uvs/J0322-1312_X_uvs.fits wwins /scr/pima/rdv94_uvs/J0322-1312_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rdv94_uvs/J0322-1312_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000849121 Jy ! Component: 100 - total flux cleaned = -0.000886163 Jy ! Component: 150 - total flux cleaned = -0.00107052 Jy ! Component: 200 - total flux cleaned = -0.00124661 Jy ! Component: 250 - total flux cleaned = -0.00128116 Jy ! Component: 300 - total flux cleaned = -0.00144439 Jy ! Component: 350 - total flux cleaned = -0.00160188 Jy ! Component: 400 - total flux cleaned = -0.00172433 Jy ! Component: 450 - total flux cleaned = -0.00184317 Jy ! Component: 500 - total flux cleaned = -0.00201612 Jy ! Component: 550 - total flux cleaned = -0.00218415 Jy ! Component: 600 - total flux cleaned = -0.0022931 Jy ! Component: 650 - total flux cleaned = -0.00248014 Jy ! Component: 700 - total flux cleaned = -0.00266238 Jy ! Component: 750 - total flux cleaned = -0.00278936 Jy ! Component: 800 - total flux cleaned = -0.00288864 Jy ! Component: 850 - total flux cleaned = -0.00301042 Jy ! Component: 900 - total flux cleaned = -0.00303414 Jy ! Component: 950 - total flux cleaned = -0.00315085 Jy ! Component: 1000 - total flux cleaned = -0.0032429 Jy ! Component: 1050 - total flux cleaned = -0.00335529 Jy ! Component: 1100 - total flux cleaned = -0.00342169 Jy ! Component: 1150 - total flux cleaned = -0.00350807 Jy ! Component: 1200 - total flux cleaned = -0.00357166 Jy ! Component: 1250 - total flux cleaned = -0.00361328 Jy ! Component: 1300 - total flux cleaned = -0.00357196 Jy ! Component: 1350 - total flux cleaned = -0.00361313 Jy ! Component: 1400 - total flux cleaned = -0.00363361 Jy ! Component: 1450 - total flux cleaned = -0.00363396 Jy ! Component: 1500 - total flux cleaned = -0.0036148 Jy ! Component: 1550 - total flux cleaned = -0.00367241 Jy ! Component: 1600 - total flux cleaned = -0.00369099 Jy ! Component: 1650 - total flux cleaned = -0.00370922 Jy ! Component: 1700 - total flux cleaned = -0.00359928 Jy ! Component: 1750 - total flux cleaned = -0.00359976 Jy ! Component: 1800 - total flux cleaned = -0.00356394 Jy ! Component: 1850 - total flux cleaned = -0.00354582 Jy ! Component: 1900 - total flux cleaned = -0.00347588 Jy ! Component: 1950 - total flux cleaned = -0.00344152 Jy ! Component: 2000 - total flux cleaned = -0.00337356 Jy ! Component: 2050 - total flux cleaned = -0.00332299 Jy ! Component: 2100 - total flux cleaned = -0.00330641 Jy ! Component: 2150 - total flux cleaned = -0.00330608 Jy ! Component: 2200 - total flux cleaned = -0.00324067 Jy ! Component: 2250 - total flux cleaned = -0.00324083 Jy ! Component: 2300 - total flux cleaned = -0.00322466 Jy ! Component: 2350 - total flux cleaned = -0.00319302 Jy ! Component: 2400 - total flux cleaned = -0.00316165 Jy ! Component: 2450 - total flux cleaned = -0.00317717 Jy ! Component: 2500 - total flux cleaned = -0.0031619 Jy ! Component: 2550 - total flux cleaned = -0.00319238 Jy ! Component: 2600 - total flux cleaned = -0.0031773 Jy ! Component: 2650 - total flux cleaned = -0.00316258 Jy ! Component: 2700 - total flux cleaned = -0.00311815 Jy ! Component: 2750 - total flux cleaned = -0.00311824 Jy ! Component: 2800 - total flux cleaned = -0.00310371 Jy ! Component: 2850 - total flux cleaned = -0.00306012 Jy ! Component: 2900 - total flux cleaned = -0.00306019 Jy ! Component: 2950 - total flux cleaned = -0.00301753 Jy ! Component: 3000 - total flux cleaned = -0.00301752 Jy ! Component: 3050 - total flux cleaned = -0.00300354 Jy ! Component: 3100 - total flux cleaned = -0.00303124 Jy ! Component: 3150 - total flux cleaned = -0.00298994 Jy ! Component: 3200 - total flux cleaned = -0.00296261 Jy ! Component: 3250 - total flux cleaned = -0.00294905 Jy ! Component: 3300 - total flux cleaned = -0.00301647 Jy ! Component: 3350 - total flux cleaned = -0.00301645 Jy ! Component: 3400 - total flux cleaned = -0.00300314 Jy ! Component: 3450 - total flux cleaned = -0.00297685 Jy ! Component: 3500 - total flux cleaned = -0.00298998 Jy ! Component: 3550 - total flux cleaned = -0.00305506 Jy ! Component: 3600 - total flux cleaned = -0.00305503 Jy ! Component: 3650 - total flux cleaned = -0.00308066 Jy ! Component: 3700 - total flux cleaned = -0.0031062 Jy ! Component: 3750 - total flux cleaned = -0.00311886 Jy ! Component: 3800 - total flux cleaned = -0.00311892 Jy ! Component: 3850 - total flux cleaned = -0.00315655 Jy ! Component: 3900 - total flux cleaned = -0.00318141 Jy ! Component: 3950 - total flux cleaned = -0.00311947 Jy ! Component: 4000 - total flux cleaned = -0.00320562 Jy ! Component: 4050 - total flux cleaned = -0.00326671 Jy ! Total flux subtracted in 4096 components = -0.00321797 Jy ! Clean residual min=-0.000855 max=0.000718 Jy/beam ! Clean residual mean=0.000000 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.0856161 Jy keep ! Adding 346 model components to the UV plane model. ! The established model now contains 452 components and 0.0856161 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv94_uvs/J0322-1312_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8926 x 3.385 at -16.82 degrees (North through East) ! Clean map min=-0.0017167 max=0.072612 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J0322-1312_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.072612 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00021557 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.890638 0.890638 1.78128 3.56255 7.12511 14.2502 28.5004 57.0009 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 quit ! Quitting program ! Log file /scr/pima/rdv94_uvs/J0322-1312_X_uvs.log closed on Mon Sep 23 22:08:03 2013