! Started logfile: /scr/pima/rdv94_uvs/J0322-1312_S_uvs.log on Mon Sep 23 22:08:24 2013 obs /scr/pima/rdv94_uvs/J0322-1312_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv94_uvs/J0322-1312_S_uva.fits ! AN table 1: 178 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.97512 visibilities/baseline/integration-bin. ! Found source: J0322-1312 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23693e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26693e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35693e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37693e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 19440 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J0322-1312_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.012316Jy sigma=0.327638 ! Fit after self-cal, rms=0.937024Jy sigma=0.303031 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.664 mas, bmaj=12.55 mas, bpa=-18.6 degrees ! Estimated noise=31.6736 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0555451 Jy ! Component: 100 - total flux cleaned = 0.067706 Jy ! Total flux subtracted in 100 components = 0.067706 Jy ! Clean residual min=-0.005793 max=0.005263 Jy/beam ! Clean residual mean=0.000016 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.067706 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.067706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115196Jy sigma=0.035784 ! Fit after self-cal, rms=0.113507Jy sigma=0.035217 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=12.95 mas, bpa=-16.69 degrees ! Estimated noise=15.8779 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496009 Jy ! Component: 100 - total flux cleaned = 0.00735136 Jy ! Component: 150 - total flux cleaned = 0.00856259 Jy ! Component: 200 - total flux cleaned = 0.0086739 Jy ! Total flux subtracted in 200 components = 0.0086739 Jy ! Clean residual min=-0.003624 max=0.003564 Jy/beam ! Clean residual mean=-0.000003 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.0763799 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.0763799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113296Jy sigma=0.035139 ! Fit after self-cal, rms=0.113290Jy sigma=0.035127 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.98 KP 1.07 ! LA 1.38 MK 0.83 NL 1.01 OV 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.12 HN 1.01 KP 1.09 ! LA 1.28 MK 0.96 NL 0.96 OV 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.07 HN 1.04 KP 0.88 ! LA 0.95 MK 0.99 NL 1.19 OV 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.07 HN 0.90 KP 0.78 ! LA 0.75 MK 1.08 NL 1.02 OV 0.86 ! ! ! Fit before self-cal, rms=0.113290Jy sigma=0.035127 ! Fit after self-cal, rms=0.111509Jy sigma=0.034827 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=12.89 mas, bpa=-16.81 degrees ! Estimated noise=15.6059 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163448 Jy ! Component: 100 - total flux cleaned = 0.00217668 Jy ! Component: 150 - total flux cleaned = 0.00225335 Jy ! Component: 200 - total flux cleaned = 0.00232344 Jy ! Total flux subtracted in 200 components = 0.00232344 Jy ! Clean residual min=-0.002608 max=0.002839 Jy/beam ! Clean residual mean=0.000007 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.0787033 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 0.0787033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111466Jy sigma=0.034818 ! Fit after self-cal, rms=0.111848Jy sigma=0.034756 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111848Jy sigma=0.034756 ! Fit after self-cal, rms=0.113055Jy sigma=0.034685 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=12.8 mas, bpa=-17.04 degrees ! Estimated noise=15.6418 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145275 Jy ! Component: 100 - total flux cleaned = 0.00140733 Jy ! Component: 150 - total flux cleaned = 0.00141025 Jy ! Component: 200 - total flux cleaned = 0.00134232 Jy ! Total flux subtracted in 200 components = 0.00134232 Jy ! Clean residual min=-0.002373 max=0.002496 Jy/beam ! Clean residual mean=0.000001 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.0800457 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.0800457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113006Jy sigma=0.034674 ! Fit after self-cal, rms=0.113200Jy sigma=0.034653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000292004 Jy ! Component: 100 - total flux cleaned = -0.000291356 Jy ! Component: 150 - total flux cleaned = -0.00026361 Jy ! Component: 200 - total flux cleaned = -0.000238101 Jy ! Total flux subtracted in 200 components = -0.000238101 Jy ! Clean residual min=-0.002492 max=0.002510 Jy/beam ! Clean residual mean=0.000003 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.0798076 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.0798076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113181Jy sigma=0.034649 ! Fit after self-cal, rms=0.113196Jy sigma=0.034647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113196Jy sigma=0.034647 ! Fit after self-cal, rms=0.113645Jy sigma=0.034639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=12.7 mas, bpa=-17.21 degrees ! Estimated noise=15.6044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104139 Jy ! Component: 100 - total flux cleaned = 0.00108616 Jy ! Component: 150 - total flux cleaned = 0.00102773 Jy ! Component: 200 - total flux cleaned = 0.000975925 Jy ! Total flux subtracted in 200 components = 0.000975925 Jy ! Clean residual min=-0.002460 max=0.002515 Jy/beam ! Clean residual mean=0.000001 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0807835 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.0807835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113617Jy sigma=0.034634 ! Fit after self-cal, rms=0.113692Jy sigma=0.034631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.49859e-05 Jy ! Component: 100 - total flux cleaned = -6.45687e-05 Jy ! Component: 150 - total flux cleaned = -6.40329e-05 Jy ! Component: 200 - total flux cleaned = -2.2198e-05 Jy ! Total flux subtracted in 200 components = -2.2198e-05 Jy ! Clean residual min=-0.002477 max=0.002447 Jy/beam ! Clean residual mean=0.000001 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.0807613 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.0807613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113680Jy sigma=0.034628 ! Fit after self-cal, rms=0.113689Jy sigma=0.034628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113689Jy sigma=0.034628 ! Fit after self-cal, rms=0.113680Jy sigma=0.034625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.442 mas, bmaj=15.03 mas, bpa=-3.555 degrees ! Estimated noise=18.9375 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000300438 Jy ! Component: 100 - total flux cleaned = 0.00043933 Jy ! Component: 150 - total flux cleaned = 0.000544171 Jy ! Component: 200 - total flux cleaned = 0.0006572 Jy ! Total flux subtracted in 200 components = 0.0006572 Jy ! Clean residual min=-0.002911 max=0.003116 Jy/beam ! Clean residual mean=0.000000 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.0814185 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 55 components and 0.0814185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113671Jy sigma=0.034625 ! Fit after self-cal, rms=0.113704Jy sigma=0.034623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.67553e-05 Jy ! Component: 100 - total flux cleaned = 0.000175273 Jy ! Component: 150 - total flux cleaned = 0.000225843 Jy ! Component: 200 - total flux cleaned = 0.000209595 Jy ! Total flux subtracted in 200 components = 0.000209595 Jy ! Clean residual min=-0.002900 max=0.003065 Jy/beam ! Clean residual mean=0.000001 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.0816281 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.0816281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113699Jy sigma=0.034624 ! Fit after self-cal, rms=0.113703Jy sigma=0.034623 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=12.61 mas, bpa=-17.36 degrees ! Estimated noise=15.5501 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.319 x 12.61 at -17.36 degrees (North through East) ! Clean map min=-0.0023665 max=0.070331 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.631 mas, bmaj=12.44 mas, bpa=-19.2 degrees ! Estimated noise=30.3128 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0550516 Jy ! Component: 100 - total flux cleaned = 0.0679039 Jy ! Component: 150 - total flux cleaned = 0.0738905 Jy ! Component: 200 - total flux cleaned = 0.0761574 Jy ! Total flux subtracted in 200 components = 0.0761574 Jy ! Clean residual min=-0.004118 max=0.003901 Jy/beam ! Clean residual mean=0.000002 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.0761574 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0761574 Jy ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=12.61 mas, bpa=-17.36 degrees ! Estimated noise=15.5501 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324696 Jy ! Component: 100 - total flux cleaned = 0.00412064 Jy ! Component: 150 - total flux cleaned = 0.00424072 Jy ! Component: 200 - total flux cleaned = 0.00434693 Jy ! Total flux subtracted in 200 components = 0.00434693 Jy ! Clean residual min=-0.002662 max=0.002574 Jy/beam ! Clean residual mean=0.000001 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.0805044 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.0805043 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.442 mas, bmaj=15.03 mas, bpa=-3.555 degrees ! Estimated noise=18.9375 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104736 Jy ! Component: 100 - total flux cleaned = 0.00130822 Jy ! Component: 150 - total flux cleaned = 0.00130944 Jy ! Component: 200 - total flux cleaned = 0.00128528 Jy ! Total flux subtracted in 200 components = 0.00128528 Jy ! Clean residual min=-0.003160 max=0.003113 Jy/beam ! Clean residual mean=0.000001 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.0817896 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.36138e-05 Jy ! Component: 100 - total flux cleaned = -4.64238e-05 Jy ! Component: 150 - total flux cleaned = -6.80122e-05 Jy ! Component: 200 - total flux cleaned = -8.87988e-05 Jy ! Total flux subtracted in 200 components = -8.87988e-05 Jy ! Clean residual min=-0.003103 max=0.003100 Jy/beam ! Clean residual mean=0.000001 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.0817008 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 39 components and 0.0817008 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.319 mas, bmaj=12.61 mas, bpa=-17.36 degrees ! Estimated noise=15.5501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.88697e-06 Jy ! Component: 100 - total flux cleaned = -5.71745e-05 Jy ! Component: 150 - total flux cleaned = -8.63894e-05 Jy ! Component: 200 - total flux cleaned = -0.000138331 Jy ! Total flux subtracted in 200 components = -0.000138331 Jy ! Clean residual min=-0.002581 max=0.002486 Jy/beam ! Clean residual mean=0.000000 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0815625 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.0815625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113700Jy sigma=0.034627 ! Fit after self-cal, rms=0.113698Jy sigma=0.034622 wmodel /scr/pima/rdv94_uvs/J0322-1312_S_map.mod ! Writing 47 model components to file: /scr/pima/rdv94_uvs/J0322-1312_S_map.mod wobs /scr/pima/rdv94_uvs/J0322-1312_S_uvs.fits ! Writing UV FITS file: /scr/pima/rdv94_uvs/J0322-1312_S_uvs.fits wwins /scr/pima/rdv94_uvs/J0322-1312_S_map.win ! wwins: Wrote 1 windows to /scr/pima/rdv94_uvs/J0322-1312_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -8.06034e-05 Jy ! Component: 100 - total flux cleaned = -0.000528259 Jy ! Component: 150 - total flux cleaned = -0.000946269 Jy ! Component: 200 - total flux cleaned = -0.00116299 Jy ! Component: 250 - total flux cleaned = -0.00133743 Jy ! Component: 300 - total flux cleaned = -0.00160497 Jy ! Component: 350 - total flux cleaned = -0.0017334 Jy ! Component: 400 - total flux cleaned = -0.00182618 Jy ! Component: 450 - total flux cleaned = -0.00194697 Jy ! Component: 500 - total flux cleaned = -0.00197634 Jy ! Component: 550 - total flux cleaned = -0.00206198 Jy ! Component: 600 - total flux cleaned = -0.00222734 Jy ! Component: 650 - total flux cleaned = -0.00225307 Jy ! Component: 700 - total flux cleaned = -0.00230581 Jy ! Component: 750 - total flux cleaned = -0.00235694 Jy ! Component: 800 - total flux cleaned = -0.00230651 Jy ! Component: 850 - total flux cleaned = -0.00233188 Jy ! Component: 900 - total flux cleaned = -0.00238019 Jy ! Component: 950 - total flux cleaned = -0.00242743 Jy ! Component: 1000 - total flux cleaned = -0.00244985 Jy ! Component: 1050 - total flux cleaned = -0.00244961 Jy ! Component: 1100 - total flux cleaned = -0.00238245 Jy ! Component: 1150 - total flux cleaned = -0.00238266 Jy ! Component: 1200 - total flux cleaned = -0.00236115 Jy ! Component: 1250 - total flux cleaned = -0.0024243 Jy ! Component: 1300 - total flux cleaned = -0.00240301 Jy ! Component: 1350 - total flux cleaned = -0.00240302 Jy ! Component: 1400 - total flux cleaned = -0.00234309 Jy ! Component: 1450 - total flux cleaned = -0.00242261 Jy ! Component: 1500 - total flux cleaned = -0.00238362 Jy ! Component: 1550 - total flux cleaned = -0.00240273 Jy ! Component: 1600 - total flux cleaned = -0.00240225 Jy ! Component: 1650 - total flux cleaned = -0.00240215 Jy ! Component: 1700 - total flux cleaned = -0.00243892 Jy ! Component: 1750 - total flux cleaned = -0.00251097 Jy ! Component: 1800 - total flux cleaned = -0.00251085 Jy ! Component: 1850 - total flux cleaned = -0.00259894 Jy ! Component: 1900 - total flux cleaned = -0.00266856 Jy ! Component: 1950 - total flux cleaned = -0.00277161 Jy ! Component: 2000 - total flux cleaned = -0.00285621 Jy ! Component: 2050 - total flux cleaned = -0.00288969 Jy ! Component: 2100 - total flux cleaned = -0.00293937 Jy ! Component: 2150 - total flux cleaned = -0.00298864 Jy ! Component: 2200 - total flux cleaned = -0.00306983 Jy ! Component: 2250 - total flux cleaned = -0.00315001 Jy ! Component: 2300 - total flux cleaned = -0.00319727 Jy ! Component: 2350 - total flux cleaned = -0.0031973 Jy ! Component: 2400 - total flux cleaned = -0.00325949 Jy ! Component: 2450 - total flux cleaned = -0.00330602 Jy ! Component: 2500 - total flux cleaned = -0.0034123 Jy ! Component: 2550 - total flux cleaned = -0.00341252 Jy ! Component: 2600 - total flux cleaned = -0.00348705 Jy ! Component: 2650 - total flux cleaned = -0.00351665 Jy ! Component: 2700 - total flux cleaned = -0.00353133 Jy ! Component: 2750 - total flux cleaned = -0.00357468 Jy ! Component: 2800 - total flux cleaned = -0.00356045 Jy ! Component: 2850 - total flux cleaned = -0.00361746 Jy ! Component: 2900 - total flux cleaned = -0.00367377 Jy ! Component: 2950 - total flux cleaned = -0.0036736 Jy ! Component: 3000 - total flux cleaned = -0.00372886 Jy ! Component: 3050 - total flux cleaned = -0.00368782 Jy ! Component: 3100 - total flux cleaned = -0.00371499 Jy ! Component: 3150 - total flux cleaned = -0.00370189 Jy ! Component: 3200 - total flux cleaned = -0.0037152 Jy ! Component: 3250 - total flux cleaned = -0.00375478 Jy ! Component: 3300 - total flux cleaned = -0.00375463 Jy ! Component: 3350 - total flux cleaned = -0.00367657 Jy ! Component: 3400 - total flux cleaned = -0.00366368 Jy ! Component: 3450 - total flux cleaned = -0.00368935 Jy ! Component: 3500 - total flux cleaned = -0.00368939 Jy ! Component: 3550 - total flux cleaned = -0.00368934 Jy ! Component: 3600 - total flux cleaned = -0.0036766 Jy ! Component: 3650 - total flux cleaned = -0.00366402 Jy ! Component: 3700 - total flux cleaned = -0.00363938 Jy ! Component: 3750 - total flux cleaned = -0.00363938 Jy ! Component: 3800 - total flux cleaned = -0.0036027 Jy ! Component: 3850 - total flux cleaned = -0.00360284 Jy ! Component: 3900 - total flux cleaned = -0.00357885 Jy ! Component: 3950 - total flux cleaned = -0.00362642 Jy ! Component: 4000 - total flux cleaned = -0.00359083 Jy ! Component: 4050 - total flux cleaned = -0.00357916 Jy ! Total flux subtracted in 4096 components = -0.00360256 Jy ! Clean residual min=-0.000769 max=0.000701 Jy/beam ! Clean residual mean=-0.000000 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.0779599 Jy keep ! Adding 337 model components to the UV plane model. ! The established model now contains 384 components and 0.0779599 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv94_uvs/J0322-1312_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.319 x 12.61 at -17.36 degrees (North through East) ! Clean map min=-0.0015767 max=0.069296 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J0322-1312_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0692961 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000220544 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.95479 0.95479 1.90958 3.81916 7.63832 15.2766 30.5533 61.1066 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 quit ! Quitting program ! Log file /scr/pima/rdv94_uvs/J0322-1312_S_uvs.log closed on Mon Sep 23 22:08:30 2013