! Started logfile: /scr/pima/rdv94_uvs/J0144-3938_S_uvs.log on Mon Sep 23 22:08:04 2013
obs /scr/pima/rdv94_uvs/J0144-3938_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv94_uvs/J0144-3938_S_uva.fits
! AN table 1: 179 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.991806 visibilities/baseline/integration-bin.
! Found source: J0144-3938
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09      1.6e+07          1      1.6e+07
!  02        2  2.26693e+09      1.6e+07          1      1.6e+07
!  03        3  2.35693e+09      1.6e+07          1      1.6e+07
!  04        4  2.37693e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 10652 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J0144-3938_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.014214Jy  sigma=0.547669
! Fit after  self-cal, rms=0.883200Jy  sigma=0.463698
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.772 mas, bmaj=18.44 mas, bpa=-23.07 degrees
! Estimated noise=31.5739 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.104231 Jy
! Component: 100  -  total flux cleaned = 0.128625 Jy
! Total flux subtracted in 100 components = 0.128625 Jy
! Clean residual min=-0.010409 max=0.011434 Jy/beam
! Clean residual mean=0.000086 rms=0.003289 Jy/beam
! Combined flux in latest and established models = 0.128625 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.128625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161457Jy  sigma=0.075516
! Fit after  self-cal, rms=0.161162Jy  sigma=0.075322
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.544 mas, bmaj=20.52 mas, bpa=-21.64 degrees
! Estimated noise=13.5868 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0138518 Jy
! Component: 100  -  total flux cleaned = 0.0189767 Jy
! Component: 150  -  total flux cleaned = 0.021608 Jy
! Component: 200  -  total flux cleaned = 0.0220967 Jy
! Total flux subtracted in 200 components = 0.0220967 Jy
! Clean residual min=-0.007146 max=0.007183 Jy/beam
! Clean residual mean=0.000004 rms=0.002014 Jy/beam
! Combined flux in latest and established models = 0.150722 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 36 components and 0.150722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.160325Jy  sigma=0.074605
! Fit after  self-cal, rms=0.160650Jy  sigma=0.074575
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     KP        1.10     LA        1.28     MK        0.94     
!   NL        1.05     OV        0.95     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     KP        0.96     LA        1.19     MK        1.03     
!   NL        1.09     OV        1.04     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.13     KP        0.91     LA        0.90     MK        1.07     
!   NL        1.06     OV        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        0.88     LA        0.73     MK        1.03     
!   NL        1.00     OV        0.90     
! 
! 
! Fit before self-cal, rms=0.160650Jy  sigma=0.074575
! Fit after  self-cal, rms=0.161814Jy  sigma=0.073131
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.586 mas, bmaj=20.62 mas, bpa=-21.71 degrees
! Estimated noise=13.5184 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00244568 Jy
! Component: 100  -  total flux cleaned = -0.00299828 Jy
! Component: 150  -  total flux cleaned = -0.00299875 Jy
! Component: 200  -  total flux cleaned = -0.00299866 Jy
! Total flux subtracted in 200 components = -0.00299866 Jy
! Clean residual min=-0.004065 max=0.004910 Jy/beam
! Clean residual mean=-0.000003 rms=0.001296 Jy/beam
! Combined flux in latest and established models = 0.147723 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 50 components and 0.147723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161728Jy  sigma=0.073108
! Fit after  self-cal, rms=0.162562Jy  sigma=0.072978
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.162562Jy  sigma=0.072978
! Fit after  self-cal, rms=0.165340Jy  sigma=0.072923
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.601 mas, bmaj=20.71 mas, bpa=-21.73 degrees
! Estimated noise=13.5488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00178949 Jy
! Component: 100  -  total flux cleaned = -0.00198141 Jy
! Component: 150  -  total flux cleaned = -0.00192377 Jy
! Component: 200  -  total flux cleaned = -0.00192472 Jy
! Total flux subtracted in 200 components = -0.00192472 Jy
! Clean residual min=-0.004044 max=0.005028 Jy/beam
! Clean residual mean=0.000002 rms=0.001249 Jy/beam
! Combined flux in latest and established models = 0.145798 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 54 components and 0.145798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165265Jy  sigma=0.072906
! Fit after  self-cal, rms=0.165538Jy  sigma=0.072899
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.56606e-07 Jy
! Component: 100  -  total flux cleaned = 5.31653e-05 Jy
! Component: 150  -  total flux cleaned = 0.000102941 Jy
! Component: 200  -  total flux cleaned = 0.000102306 Jy
! Total flux subtracted in 200 components = 0.000102306 Jy
! Clean residual min=-0.004147 max=0.005061 Jy/beam
! Clean residual mean=0.000001 rms=0.001254 Jy/beam
! Combined flux in latest and established models = 0.145901 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 59 components and 0.145901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165485Jy  sigma=0.072890
! Fit after  self-cal, rms=0.165534Jy  sigma=0.072888
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165534Jy  sigma=0.072888
! Fit after  self-cal, rms=0.168090Jy  sigma=0.072816
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.611 mas, bmaj=20.81 mas, bpa=-21.74 degrees
! Estimated noise=13.5622 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00028126 Jy
! Component: 100  -  total flux cleaned = -0.000789054 Jy
! Component: 150  -  total flux cleaned = -0.00102526 Jy
! Component: 200  -  total flux cleaned = -0.00102607 Jy
! Total flux subtracted in 200 components = -0.00102607 Jy
! Clean residual min=-0.004079 max=0.004313 Jy/beam
! Clean residual mean=0.000007 rms=0.001120 Jy/beam
! Combined flux in latest and established models = 0.144875 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 66 components and 0.144875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.168025Jy  sigma=0.072807
! Fit after  self-cal, rms=0.168185Jy  sigma=0.072796
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.18847e-06 Jy
! Component: 100  -  total flux cleaned = -4.04854e-05 Jy
! Component: 150  -  total flux cleaned = -3.96804e-05 Jy
! Component: 200  -  total flux cleaned = -3.80473e-05 Jy
! Total flux subtracted in 200 components = -3.80473e-05 Jy
! Clean residual min=-0.004017 max=0.004408 Jy/beam
! Clean residual mean=0.000006 rms=0.001113 Jy/beam
! Combined flux in latest and established models = 0.144837 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 69 components and 0.144837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.168148Jy  sigma=0.072791
! Fit after  self-cal, rms=0.168183Jy  sigma=0.072790
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.168183Jy  sigma=0.072790
! Fit after  self-cal, rms=0.168789Jy  sigma=0.072781
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.111 mas, bmaj=38.73 mas, bpa=-6.963 degrees
! Estimated noise=14.6338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.49221e-05 Jy
! Component: 100  -  total flux cleaned = -0.000100262 Jy
! Component: 150  -  total flux cleaned = 6.68815e-05 Jy
! Component: 200  -  total flux cleaned = 0.000120702 Jy
! Total flux subtracted in 200 components = 0.000120702 Jy
! Clean residual min=-0.004549 max=0.003984 Jy/beam
! Clean residual mean=-0.000003 rms=0.001290 Jy/beam
! Combined flux in latest and established models = 0.144957 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 79 components and 0.144957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.168777Jy  sigma=0.072784
! Fit after  self-cal, rms=0.168829Jy  sigma=0.072779
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.30084e-05 Jy
! Component: 100  -  total flux cleaned = -9.49346e-05 Jy
! Component: 150  -  total flux cleaned = -9.62687e-05 Jy
! Component: 200  -  total flux cleaned = -0.000126137 Jy
! Total flux subtracted in 200 components = -0.000126137 Jy
! Clean residual min=-0.004532 max=0.003994 Jy/beam
! Clean residual mean=-0.000002 rms=0.001295 Jy/beam
! Combined flux in latest and established models = 0.144831 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 89 components and 0.144831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.168828Jy  sigma=0.072783
! Fit after  self-cal, rms=0.168842Jy  sigma=0.072781
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.613 mas, bmaj=20.89 mas, bpa=-21.7 degrees
! Estimated noise=13.5608 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.613 x 20.89 at -21.7 degrees (North through East)
! Clean map  min=-0.0040155  max=0.12977 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.817 mas, bmaj=18.74 mas, bpa=-23.1 degrees
! Estimated noise=32.0595 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103473 Jy
! Component: 100  -  total flux cleaned = 0.129363 Jy
! Component: 150  -  total flux cleaned = 0.1374 Jy
! Component: 200  -  total flux cleaned = 0.139084 Jy
! Total flux subtracted in 200 components = 0.139084 Jy
! Clean residual min=-0.010878 max=0.010702 Jy/beam
! Clean residual mean=0.000033 rms=0.002823 Jy/beam
! Combined flux in latest and established models = 0.139084 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.139084 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.613 mas, bmaj=20.89 mas, bpa=-21.7 degrees
! Estimated noise=13.5608 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00589027 Jy
! Component: 100  -  total flux cleaned = 0.00560493 Jy
! Component: 150  -  total flux cleaned = 0.00518302 Jy
! Component: 200  -  total flux cleaned = 0.00494971 Jy
! Total flux subtracted in 200 components = 0.00494971 Jy
! Clean residual min=-0.004487 max=0.004549 Jy/beam
! Clean residual mean=0.000009 rms=0.001210 Jy/beam
! Combined flux in latest and established models = 0.144034 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 52 components and 0.144034 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.111 mas, bmaj=38.73 mas, bpa=-6.963 degrees
! Estimated noise=14.6338 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000140879 Jy
! Component: 100  -  total flux cleaned = 0.000119891 Jy
! Component: 150  -  total flux cleaned = 0.000269671 Jy
! Component: 200  -  total flux cleaned = 0.00046278 Jy
! Total flux subtracted in 200 components = 0.00046278 Jy
! Clean residual min=-0.004521 max=0.004038 Jy/beam
! Clean residual mean=0.000002 rms=0.001304 Jy/beam
! Combined flux in latest and established models = 0.144497 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.67697e-07 Jy
! Component: 100  -  total flux cleaned = -2.81585e-05 Jy
! Component: 150  -  total flux cleaned = -2.84362e-05 Jy
! Component: 200  -  total flux cleaned = -5.30006e-05 Jy
! Total flux subtracted in 200 components = -5.30006e-05 Jy
! Clean residual min=-0.004510 max=0.003937 Jy/beam
! Clean residual mean=0.000001 rms=0.001286 Jy/beam
! Combined flux in latest and established models = 0.144444 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 79 components and 0.144444 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.613 mas, bmaj=20.89 mas, bpa=-21.7 degrees
! Estimated noise=13.5608 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000267569 Jy
! Component: 100  -  total flux cleaned = -0.00033426 Jy
! Component: 150  -  total flux cleaned = -0.000331041 Jy
! Component: 200  -  total flux cleaned = -0.000390866 Jy
! Total flux subtracted in 200 components = -0.000390866 Jy
! Clean residual min=-0.004268 max=0.004315 Jy/beam
! Clean residual mean=0.000005 rms=0.001115 Jy/beam
! Combined flux in latest and established models = 0.144053 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 93 components and 0.144053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.168911Jy  sigma=0.072797
! Fit after  self-cal, rms=0.168894Jy  sigma=0.072790
wmodel /scr/pima/rdv94_uvs/J0144-3938_S_map.mod
! Writing 93 model components to file: /scr/pima/rdv94_uvs/J0144-3938_S_map.mod
wobs /scr/pima/rdv94_uvs/J0144-3938_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv94_uvs/J0144-3938_S_uvs.fits
wwins /scr/pima/rdv94_uvs/J0144-3938_S_map.win
! wwins: Wrote 1 windows to /scr/pima/rdv94_uvs/J0144-3938_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000396394 Jy
! Component: 100  -  total flux cleaned = 0.000527093 Jy
! Component: 150  -  total flux cleaned = 0.000713413 Jy
! Component: 200  -  total flux cleaned = 0.000994041 Jy
! Component: 250  -  total flux cleaned = 0.00109885 Jy
! Component: 300  -  total flux cleaned = 0.00114839 Jy
! Component: 350  -  total flux cleaned = 0.00139648 Jy
! Component: 400  -  total flux cleaned = 0.00153969 Jy
! Component: 450  -  total flux cleaned = 0.00158563 Jy
! Component: 500  -  total flux cleaned = 0.00176633 Jy
! Component: 550  -  total flux cleaned = 0.00185411 Jy
! Component: 600  -  total flux cleaned = 0.00193932 Jy
! Component: 650  -  total flux cleaned = 0.00202223 Jy
! Component: 700  -  total flux cleaned = 0.00202097 Jy
! Component: 750  -  total flux cleaned = 0.00198177 Jy
! Component: 800  -  total flux cleaned = 0.00205831 Jy
! Component: 850  -  total flux cleaned = 0.0020588 Jy
! Component: 900  -  total flux cleaned = 0.00202208 Jy
! Component: 950  -  total flux cleaned = 0.00205723 Jy
! Component: 1000  -  total flux cleaned = 0.00202178 Jy
! Component: 1050  -  total flux cleaned = 0.00198724 Jy
! Component: 1100  -  total flux cleaned = 0.00188562 Jy
! Component: 1150  -  total flux cleaned = 0.00185283 Jy
! Component: 1200  -  total flux cleaned = 0.0017877 Jy
! Component: 1250  -  total flux cleaned = 0.00175565 Jy
! Component: 1300  -  total flux cleaned = 0.00169295 Jy
! Component: 1350  -  total flux cleaned = 0.00160064 Jy
! Component: 1400  -  total flux cleaned = 0.00163076 Jy
! Component: 1450  -  total flux cleaned = 0.00154134 Jy
! Component: 1500  -  total flux cleaned = 0.00157047 Jy
! Component: 1550  -  total flux cleaned = 0.00157067 Jy
! Component: 1600  -  total flux cleaned = 0.00151392 Jy
! Component: 1650  -  total flux cleaned = 0.00157018 Jy
! Component: 1700  -  total flux cleaned = 0.00151459 Jy
! Component: 1750  -  total flux cleaned = 0.00148717 Jy
! Component: 1800  -  total flux cleaned = 0.00151398 Jy
! Component: 1850  -  total flux cleaned = 0.00146016 Jy
! Component: 1900  -  total flux cleaned = 0.00146022 Jy
! Component: 1950  -  total flux cleaned = 0.0014606 Jy
! Component: 2000  -  total flux cleaned = 0.00148645 Jy
! Component: 2050  -  total flux cleaned = 0.00153772 Jy
! Component: 2100  -  total flux cleaned = 0.00153767 Jy
! Component: 2150  -  total flux cleaned = 0.00161281 Jy
! Component: 2200  -  total flux cleaned = 0.00166171 Jy
! Component: 2250  -  total flux cleaned = 0.0017349 Jy
! Component: 2300  -  total flux cleaned = 0.00173512 Jy
! Component: 2350  -  total flux cleaned = 0.00180662 Jy
! Component: 2400  -  total flux cleaned = 0.00173643 Jy
! Component: 2450  -  total flux cleaned = 0.00178331 Jy
! Component: 2500  -  total flux cleaned = 0.00169084 Jy
! Component: 2550  -  total flux cleaned = 0.00162229 Jy
! Component: 2600  -  total flux cleaned = 0.00148652 Jy
! Component: 2650  -  total flux cleaned = 0.00146403 Jy
! Component: 2700  -  total flux cleaned = 0.00133031 Jy
! Component: 2750  -  total flux cleaned = 0.00128614 Jy
! Component: 2800  -  total flux cleaned = 0.00119878 Jy
! Component: 2850  -  total flux cleaned = 0.00119867 Jy
! Component: 2900  -  total flux cleaned = 0.0010693 Jy
! Component: 2950  -  total flux cleaned = 0.00119759 Jy
! Component: 3000  -  total flux cleaned = 0.00121896 Jy
! Component: 3050  -  total flux cleaned = 0.00124011 Jy
! Component: 3100  -  total flux cleaned = 0.00128175 Jy
! Component: 3150  -  total flux cleaned = 0.00130235 Jy
! Component: 3200  -  total flux cleaned = 0.00130222 Jy
! Component: 3250  -  total flux cleaned = 0.00128168 Jy
! Component: 3300  -  total flux cleaned = 0.00130217 Jy
! Component: 3350  -  total flux cleaned = 0.00136297 Jy
! Component: 3400  -  total flux cleaned = 0.00128248 Jy
! Component: 3450  -  total flux cleaned = 0.00142289 Jy
! Component: 3500  -  total flux cleaned = 0.00144264 Jy
! Component: 3550  -  total flux cleaned = 0.00150204 Jy
! Component: 3600  -  total flux cleaned = 0.00154146 Jy
! Component: 3650  -  total flux cleaned = 0.00162038 Jy
! Component: 3700  -  total flux cleaned = 0.00165957 Jy
! Component: 3750  -  total flux cleaned = 0.00171807 Jy
! Component: 3800  -  total flux cleaned = 0.0018151 Jy
! Component: 3850  -  total flux cleaned = 0.0018343 Jy
! Component: 3900  -  total flux cleaned = 0.00189203 Jy
! Component: 3950  -  total flux cleaned = 0.00189203 Jy
! Component: 4000  -  total flux cleaned = 0.00187311 Jy
! Component: 4050  -  total flux cleaned = 0.00196834 Jy
! Total flux subtracted in 4096 components = 0.00193054 Jy
! Clean residual min=-0.001199 max=0.001077 Jy/beam
! Clean residual mean=0.000001 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.145983 Jy
keep
! Adding 228 model components to the UV plane model.
! The established model now contains 321 components and 0.145983 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rdv94_uvs/J0144-3938_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.613 x 20.89 at -21.7 degrees (North through East)
! Clean map  min=-0.0060151  max=0.12161 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J0144-3938_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.121613 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000346765 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.855415 0.855415 1.71083 3.42166 6.84332 13.6866 27.3733 54.7466
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.121 
quit
! Quitting program
! Log file /scr/pima/rdv94_uvs/J0144-3938_S_uvs.log closed on Mon Sep 23 22:08:09 2013