! Started logfile: /scr/pima/rdv94_uvs/J0051-4226_S_uvs.log on Mon Sep 23 22:07:45 2013
obs /scr/pima/rdv94_uvs/J0051-4226_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv94_uvs/J0051-4226_S_uva.fits
! AN table 1: 10 integrations on 6 of 6 possible baselines.
! AN table 2: 10 integrations on 10 of 10 possible baselines.
! AN table 3: 58 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.646602 visibilities/baseline/integration-bin.
! Found source: J0051-4226
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09      1.6e+07          1      1.6e+07
!  02        2  2.26693e+09      1.6e+07          1      1.6e+07
!  03        3  2.35693e+09      1.6e+07          1      1.6e+07
!  04        4  2.37693e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2664 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv94_uvs/J0051-4226_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
!  A total of 91 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
!  A total of 91 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
!  A total of 91 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 2.
!  A total of 91 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.240541Jy  sigma=5.153838
! Fit after  self-cal, rms=0.340731Jy  sigma=1.131667
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.876 mas, bmaj=13.92 mas, bpa=-18.07 degrees
! Estimated noise=4.9843 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.601638 Jy
! Component: 100  -  total flux cleaned = 0.739108 Jy
! Total flux subtracted in 100 components = 0.739108 Jy
! Clean residual min=-0.030409 max=0.052769 Jy/beam
! Clean residual mean=0.000203 rms=0.009433 Jy/beam
! Combined flux in latest and established models = 0.739108 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.739108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.238643Jy  sigma=0.916845
! Fit after  self-cal, rms=0.238686Jy  sigma=0.916785
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.782 mas, bmaj=17.16 mas, bpa=-16.29 degrees
! Estimated noise=3.51775 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0723613 Jy
! Component: 100  -  total flux cleaned = 0.107876 Jy
! Component: 150  -  total flux cleaned = 0.12629 Jy
! Component: 200  -  total flux cleaned = 0.130486 Jy
! Total flux subtracted in 200 components = 0.130486 Jy
! Clean residual min=-0.028631 max=0.026845 Jy/beam
! Clean residual mean=0.000002 rms=0.007374 Jy/beam
! Combined flux in latest and established models = 0.869595 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 38 components and 0.869595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.220026Jy  sigma=0.815066
! Fit after  self-cal, rms=0.220008Jy  sigma=0.814809
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     KP        0.99     LA        1.29     NL        1.24     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00     KP        1.04     LA        1.29     NL        1.19     
!   OV        0.99     
! 
!  A total of 33 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   FD        0.99     KP        1.04     LA        1.28     MK        0.93     
!   NL        1.30     OV        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.12     KP        0.93     LA        1.20     NL        1.36     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.05     KP        1.02     LA        1.18     NL        1.16     
!   OV        0.99     
! 
!  A total of 33 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.06     KP        1.04     LA        1.18     MK        0.98     
!   NL        1.44     OV        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.10     KP        0.89     LA        1.01     NL        1.38     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.11     KP        0.87     LA        0.93     NL        1.30     
!   OV        1.00     
! 
!  A total of 33 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.06     KP        0.91     LA        0.95     MK        0.97     
!   NL        1.40     OV        1.02     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.15     KP        0.78     LA        0.80     NL        1.21     
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.07     KP        0.83     LA        0.78     NL        1.20     
!   OV        0.87     
! 
!  A total of 33 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   FD        1.07     KP        0.85     LA        0.78     MK        1.09     
!   NL        1.36     OV        0.86     
! 
! 
! Fit before self-cal, rms=0.220008Jy  sigma=0.814809
! Fit after  self-cal, rms=0.177392Jy  sigma=0.544971
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.838 mas, bmaj=16.93 mas, bpa=-17.03 degrees
! Estimated noise=3.64578 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0049171 Jy
! Component: 100  -  total flux cleaned = -0.00614171 Jy
! Component: 150  -  total flux cleaned = -0.0068286 Jy
! Component: 200  -  total flux cleaned = -0.00771699 Jy
! Total flux subtracted in 200 components = -0.00771699 Jy
! Clean residual min=-0.011938 max=0.010147 Jy/beam
! Clean residual mean=-0.000006 rms=0.002819 Jy/beam
! Combined flux in latest and established models = 0.861878 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 56 components and 0.861878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175138Jy  sigma=0.537539
! Fit after  self-cal, rms=0.175661Jy  sigma=0.536978
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175661Jy  sigma=0.536978
! Fit after  self-cal, rms=0.177185Jy  sigma=0.526813
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.846 mas, bmaj=16.93 mas, bpa=-16.95 degrees
! Estimated noise=3.64412 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00497275 Jy
! Component: 100  -  total flux cleaned = -0.0054101 Jy
! Component: 150  -  total flux cleaned = -0.00578974 Jy
! Component: 200  -  total flux cleaned = -0.00644014 Jy
! Total flux subtracted in 200 components = -0.00644014 Jy
! Clean residual min=-0.006878 max=0.007730 Jy/beam
! Clean residual mean=-0.000004 rms=0.001952 Jy/beam
! Combined flux in latest and established models = 0.855438 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 66 components and 0.855438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.176099Jy  sigma=0.525116
! Fit after  self-cal, rms=0.176115Jy  sigma=0.525050
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000701514 Jy
! Component: 100  -  total flux cleaned = -0.00138375 Jy
! Component: 150  -  total flux cleaned = -0.00176398 Jy
! Component: 200  -  total flux cleaned = -0.00224026 Jy
! Total flux subtracted in 200 components = -0.00224026 Jy
! Clean residual min=-0.006753 max=0.007323 Jy/beam
! Clean residual mean=-0.000000 rms=0.001904 Jy/beam
! Combined flux in latest and established models = 0.853197 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 72 components and 0.853197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175580Jy  sigma=0.524639
! Fit after  self-cal, rms=0.175559Jy  sigma=0.524614
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175559Jy  sigma=0.524614
! Fit after  self-cal, rms=0.177403Jy  sigma=0.520398
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.848 mas, bmaj=16.92 mas, bpa=-16.94 degrees
! Estimated noise=3.64683 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000731998 Jy
! Component: 100  -  total flux cleaned = -0.00127516 Jy
! Component: 150  -  total flux cleaned = -0.00164018 Jy
! Component: 200  -  total flux cleaned = -0.00198176 Jy
! Total flux subtracted in 200 components = -0.00198176 Jy
! Clean residual min=-0.006020 max=0.006375 Jy/beam
! Clean residual mean=-0.000011 rms=0.001658 Jy/beam
! Combined flux in latest and established models = 0.851216 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 77 components and 0.851215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.176856Jy  sigma=0.520068
! Fit after  self-cal, rms=0.176889Jy  sigma=0.520039
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000372764 Jy
! Component: 100  -  total flux cleaned = -0.000686243 Jy
! Component: 150  -  total flux cleaned = -0.000787341 Jy
! Component: 200  -  total flux cleaned = -0.000980602 Jy
! Total flux subtracted in 200 components = -0.000980602 Jy
! Clean residual min=-0.005944 max=0.006337 Jy/beam
! Clean residual mean=-0.000010 rms=0.001640 Jy/beam
! Combined flux in latest and established models = 0.850235 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 82 components and 0.850235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.176495Jy  sigma=0.519914
! Fit after  self-cal, rms=0.176493Jy  sigma=0.519899
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.176493Jy  sigma=0.519899
! Fit after  self-cal, rms=0.177427Jy  sigma=0.519808
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.943 mas, bmaj=34.15 mas, bpa=-4.631 degrees
! Estimated noise=4.07419 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000990075 Jy
! Component: 100  -  total flux cleaned = -0.00108529 Jy
! Component: 150  -  total flux cleaned = -0.00125777 Jy
! Component: 200  -  total flux cleaned = -0.0014203 Jy
! Total flux subtracted in 200 components = -0.0014203 Jy
! Clean residual min=-0.005095 max=0.004162 Jy/beam
! Clean residual mean=-0.000016 rms=0.001481 Jy/beam
! Combined flux in latest and established models = 0.848815 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 90 components and 0.848814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177262Jy  sigma=0.519699
! Fit after  self-cal, rms=0.177227Jy  sigma=0.519690
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000168624 Jy
! Component: 100  -  total flux cleaned = -0.000281487 Jy
! Component: 150  -  total flux cleaned = -0.000420337 Jy
! Component: 200  -  total flux cleaned = -0.000549443 Jy
! Total flux subtracted in 200 components = -0.000549443 Jy
! Clean residual min=-0.005040 max=0.004111 Jy/beam
! Clean residual mean=-0.000015 rms=0.001469 Jy/beam
! Combined flux in latest and established models = 0.848265 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 93 components and 0.848265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177123Jy  sigma=0.519654
! Fit after  self-cal, rms=0.177111Jy  sigma=0.519650
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.848 mas, bmaj=16.91 mas, bpa=-16.94 degrees
! Estimated noise=3.64775 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.848 x 16.91 at -16.94 degrees (North through East)
! Clean map  min=-0.0056388  max=0.73974 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177111Jy  sigma=0.519650
! Fit after  self-cal, rms=0.164063Jy  sigma=0.422166
! Inverting map and beam 
! Estimated beam: bmin=3.85 mas, bmaj=16.93 mas, bpa=-16.97 degrees
! Estimated noise=3.64981 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000977427 Jy
! Component: 100  -  total flux cleaned = -0.00119016 Jy
! Component: 150  -  total flux cleaned = -0.0014844 Jy
! Component: 200  -  total flux cleaned = -0.0015756 Jy
! Total flux subtracted in 200 components = -0.0015756 Jy
! Clean residual min=-0.005892 max=0.006138 Jy/beam
! Clean residual mean=-0.000018 rms=0.001577 Jy/beam
! Combined flux in latest and established models = 0.846689 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 96 components and 0.846689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163607Jy  sigma=0.421989
! Fit after  self-cal, rms=0.163585Jy  sigma=0.421959
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000213992 Jy
! Component: 100  -  total flux cleaned = -0.000300796 Jy
! Component: 150  -  total flux cleaned = -0.000471018 Jy
! Component: 200  -  total flux cleaned = -0.000553674 Jy
! Total flux subtracted in 200 components = -0.000553674 Jy
! Clean residual min=-0.005936 max=0.006154 Jy/beam
! Clean residual mean=-0.000017 rms=0.001567 Jy/beam
! Combined flux in latest and established models = 0.846136 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 101 components and 0.846136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163247Jy  sigma=0.421880
! Fit after  self-cal, rms=0.163241Jy  sigma=0.421858
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163241Jy  sigma=0.421858
! Fit after  self-cal, rms=0.164028Jy  sigma=0.421795
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.869 mas, bmaj=13.64 mas, bpa=-18.65 degrees
! Estimated noise=5.26479 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.60483 Jy
! Component: 100  -  total flux cleaned = 0.737983 Jy
! Component: 150  -  total flux cleaned = 0.783134 Jy
! Component: 200  -  total flux cleaned = 0.807562 Jy
! Total flux subtracted in 200 components = 0.807562 Jy
! Clean residual min=-0.012482 max=0.015073 Jy/beam
! Clean residual mean=-0.000022 rms=0.003189 Jy/beam
! Combined flux in latest and established models = 0.807562 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.807562 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.851 mas, bmaj=16.94 mas, bpa=-16.97 degrees
! Estimated noise=3.65167 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191545 Jy
! Component: 100  -  total flux cleaned = 0.0280329 Jy
! Component: 150  -  total flux cleaned = 0.030067 Jy
! Component: 200  -  total flux cleaned = 0.0302599 Jy
! Total flux subtracted in 200 components = 0.0302599 Jy
! Clean residual min=-0.007139 max=0.008225 Jy/beam
! Clean residual mean=-0.000006 rms=0.001764 Jy/beam
! Combined flux in latest and established models = 0.837822 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 46 components and 0.837822 Jy
! Inverting map 
! Added new window around map position (8.5, 5.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00503022 Jy
! Component: 100  -  total flux cleaned = 0.00478691 Jy
! Component: 150  -  total flux cleaned = 0.0049798 Jy
! Component: 200  -  total flux cleaned = 0.00536355 Jy
! Total flux subtracted in 200 components = 0.00536355 Jy
! Clean residual min=-0.006924 max=0.005900 Jy/beam
! Clean residual mean=-0.000017 rms=0.001571 Jy/beam
! Combined flux in latest and established models = 0.843185 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 64 components and 0.843185 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.965 mas, bmaj=34.16 mas, bpa=-4.592 degrees
! Estimated noise=4.07299 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011115 Jy
! Component: 100  -  total flux cleaned = 0.00155066 Jy
! Component: 150  -  total flux cleaned = 0.00166092 Jy
! Component: 200  -  total flux cleaned = 0.00171323 Jy
! Total flux subtracted in 200 components = 0.00171323 Jy
! Clean residual min=-0.004677 max=0.004043 Jy/beam
! Clean residual mean=-0.000028 rms=0.001319 Jy/beam
! Combined flux in latest and established models = 0.844899 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.71259e-05 Jy
! Component: 100  -  total flux cleaned = 0.000190937 Jy
! Component: 150  -  total flux cleaned = 0.000280187 Jy
! Component: 200  -  total flux cleaned = 0.000364248 Jy
! Total flux subtracted in 200 components = 0.000364248 Jy
! Clean residual min=-0.004623 max=0.004065 Jy/beam
! Clean residual mean=-0.000029 rms=0.001321 Jy/beam
! Combined flux in latest and established models = 0.845263 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 85 components and 0.845263 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.851 mas, bmaj=16.94 mas, bpa=-16.97 degrees
! Estimated noise=3.65167 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000962076 Jy
! Component: 100  -  total flux cleaned = -0.000807272 Jy
! Component: 150  -  total flux cleaned = -0.000808331 Jy
! Component: 200  -  total flux cleaned = -0.000807149 Jy
! Total flux subtracted in 200 components = -0.000807149 Jy
! Clean residual min=-0.006734 max=0.005959 Jy/beam
! Clean residual mean=-0.000019 rms=0.001514 Jy/beam
! Combined flux in latest and established models = 0.844456 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 102 components and 0.844456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.167113Jy  sigma=0.421895
! Fit after  self-cal, rms=0.166745Jy  sigma=0.421708
wmodel /scr/pima/rdv94_uvs/J0051-4226_S_map.mod
! Writing 102 model components to file: /scr/pima/rdv94_uvs/J0051-4226_S_map.mod
wobs /scr/pima/rdv94_uvs/J0051-4226_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv94_uvs/J0051-4226_S_uvs.fits
wwins /scr/pima/rdv94_uvs/J0051-4226_S_map.win
! wwins: Wrote 2 windows to /scr/pima/rdv94_uvs/J0051-4226_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00172456 Jy
! Component: 100  -  total flux cleaned = -0.00223151 Jy
! Component: 150  -  total flux cleaned = -0.00185793 Jy
! Component: 200  -  total flux cleaned = -0.00150057 Jy
! Component: 250  -  total flux cleaned = -0.00132688 Jy
! Component: 300  -  total flux cleaned = -0.00116123 Jy
! Component: 350  -  total flux cleaned = -0.000841679 Jy
! Component: 400  -  total flux cleaned = -0.000609423 Jy
! Component: 450  -  total flux cleaned = -0.000381127 Jy
! Component: 500  -  total flux cleaned = -0.000156433 Jy
! Component: 550  -  total flux cleaned = 6.34862e-05 Jy
! Component: 600  -  total flux cleaned = 0.00027982 Jy
! Component: 650  -  total flux cleaned = 0.000350348 Jy
! Component: 700  -  total flux cleaned = 0.000351737 Jy
! Component: 750  -  total flux cleaned = 0.000629351 Jy
! Component: 800  -  total flux cleaned = 0.00062912 Jy
! Component: 850  -  total flux cleaned = 0.000898487 Jy
! Component: 900  -  total flux cleaned = 0.000964785 Jy
! Component: 950  -  total flux cleaned = 0.00122693 Jy
! Component: 1000  -  total flux cleaned = 0.00129107 Jy
! Component: 1050  -  total flux cleaned = 0.00141928 Jy
! Component: 1100  -  total flux cleaned = 0.00148313 Jy
! Component: 1150  -  total flux cleaned = 0.00148288 Jy
! Component: 1200  -  total flux cleaned = 0.0017309 Jy
! Component: 1250  -  total flux cleaned = 0.0017913 Jy
! Component: 1300  -  total flux cleaned = 0.00185174 Jy
! Component: 1350  -  total flux cleaned = 0.00197174 Jy
! Component: 1400  -  total flux cleaned = 0.00179231 Jy
! Component: 1450  -  total flux cleaned = 0.00202895 Jy
! Component: 1500  -  total flux cleaned = 0.00208736 Jy
! Component: 1550  -  total flux cleaned = 0.00214557 Jy
! Component: 1600  -  total flux cleaned = 0.00226039 Jy
! Component: 1650  -  total flux cleaned = 0.00226051 Jy
! Component: 1700  -  total flux cleaned = 0.00237334 Jy
! Component: 1750  -  total flux cleaned = 0.00242918 Jy
! Component: 1800  -  total flux cleaned = 0.00265015 Jy
! Component: 1850  -  total flux cleaned = 0.0026493 Jy
! Component: 1900  -  total flux cleaned = 0.00253946 Jy
! Component: 1950  -  total flux cleaned = 0.00280987 Jy
! Component: 2000  -  total flux cleaned = 0.00270254 Jy
! Component: 2050  -  total flux cleaned = 0.0028093 Jy
! Component: 2100  -  total flux cleaned = 0.00296715 Jy
! Component: 2150  -  total flux cleaned = 0.00312366 Jy
! Component: 2200  -  total flux cleaned = 0.00333167 Jy
! Component: 2250  -  total flux cleaned = 0.00333133 Jy
! Component: 2300  -  total flux cleaned = 0.00353635 Jy
! Component: 2350  -  total flux cleaned = 0.00368898 Jy
! Component: 2400  -  total flux cleaned = 0.00373938 Jy
! Component: 2450  -  total flux cleaned = 0.00403926 Jy
! Component: 2500  -  total flux cleaned = 0.00413805 Jy
! Component: 2550  -  total flux cleaned = 0.00408867 Jy
! Component: 2600  -  total flux cleaned = 0.00428479 Jy
! Component: 2650  -  total flux cleaned = 0.00413886 Jy
! Component: 2700  -  total flux cleaned = 0.00428451 Jy
! Component: 2750  -  total flux cleaned = 0.00452473 Jy
! Component: 2800  -  total flux cleaned = 0.00438152 Jy
! Component: 2850  -  total flux cleaned = 0.00442948 Jy
! Component: 2900  -  total flux cleaned = 0.00447658 Jy
! Component: 2950  -  total flux cleaned = 0.00466305 Jy
! Component: 3000  -  total flux cleaned = 0.00447756 Jy
! Component: 3050  -  total flux cleaned = 0.00461587 Jy
! Component: 3100  -  total flux cleaned = 0.00457058 Jy
! Component: 3150  -  total flux cleaned = 0.00475306 Jy
! Component: 3200  -  total flux cleaned = 0.00493396 Jy
! Component: 3250  -  total flux cleaned = 0.0049786 Jy
! Component: 3300  -  total flux cleaned = 0.00511258 Jy
! Component: 3350  -  total flux cleaned = 0.00524574 Jy
! Component: 3400  -  total flux cleaned = 0.00524549 Jy
! Component: 3450  -  total flux cleaned = 0.00542189 Jy
! Component: 3500  -  total flux cleaned = 0.00559735 Jy
! Component: 3550  -  total flux cleaned = 0.00568458 Jy
! Component: 3600  -  total flux cleaned = 0.00581445 Jy
! Component: 3650  -  total flux cleaned = 0.00598655 Jy
! Component: 3700  -  total flux cleaned = 0.00594367 Jy
! Component: 3750  -  total flux cleaned = 0.00607147 Jy
! Component: 3800  -  total flux cleaned = 0.00628374 Jy
! Component: 3850  -  total flux cleaned = 0.00641096 Jy
! Component: 3900  -  total flux cleaned = 0.00657916 Jy
! Component: 3950  -  total flux cleaned = 0.00657945 Jy
! Component: 4000  -  total flux cleaned = 0.00674609 Jy
! Component: 4050  -  total flux cleaned = 0.00682854 Jy
! Total flux subtracted in 4096 components = 0.0069107 Jy
! Clean residual min=-0.002350 max=0.002289 Jy/beam
! Clean residual mean=-0.000010 rms=0.000849 Jy/beam
! Combined flux in latest and established models = 0.851367 Jy
keep
! Adding 254 model components to the UV plane model.
! The established model now contains 356 components and 0.851366 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rdv94_uvs/J0051-4226_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.851 x 16.94 at -16.97 degrees (North through East)
! Clean map  min=-0.0055695  max=0.76307 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv94_uvs/J0051-4226_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.763067 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000849723 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.334069 0.334069 0.668138 1.33628 2.67255 5.3451 10.6902 21.3804 42.7608 85.5216
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0025 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.763 
quit
! Quitting program
! Log file /scr/pima/rdv94_uvs/J0051-4226_S_uvs.log closed on Mon Sep 23 22:07:50 2013