! Started logfile: /scr/pima/rdv93_uvs/J2114+2832_X_uvs.log on Tue Sep 24 17:09:52 2013 obs /scr/pima/rdv93_uvs/J2114+2832_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv93_uvs/J2114+2832_X_uva.fits ! AN table 1: 120 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.994444 visibilities/baseline/integration-bin. ! Found source: J2114+2832 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47993e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79493e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89993e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 21480 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv93_uvs/J2114+2832_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.075227Jy sigma=2.775049 ! Fit after self-cal, rms=0.702134Jy sigma=1.656122 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9075 mas, bmaj=1.472 mas, bpa=6.933 degrees ! Estimated noise=4.25187 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.244271 Jy ! Component: 100 - total flux cleaned = 0.316788 Jy ! Total flux subtracted in 100 components = 0.316788 Jy ! Clean residual min=-0.015554 max=0.037508 Jy/beam ! Clean residual mean=0.000019 rms=0.004447 Jy/beam ! Combined flux in latest and established models = 0.316788 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.316788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142761Jy sigma=0.353236 ! Fit after self-cal, rms=0.142187Jy sigma=0.352479 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0386139 Jy ! Component: 100 - total flux cleaned = 0.0575273 Jy ! Total flux subtracted in 100 components = 0.0575273 Jy ! Clean residual min=-0.012100 max=0.025651 Jy/beam ! Clean residual mean=0.000011 rms=0.003299 Jy/beam ! Combined flux in latest and established models = 0.374315 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 13 components and 0.374315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132123Jy sigma=0.308669 ! Fit after self-cal, rms=0.132021Jy sigma=0.308288 ! Inverting map ! Added new window around map position (-1.2, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222707 Jy ! Component: 100 - total flux cleaned = 0.0322305 Jy ! Total flux subtracted in 100 components = 0.0322305 Jy ! Clean residual min=-0.012812 max=0.016461 Jy/beam ! Clean residual mean=0.000008 rms=0.002949 Jy/beam ! Combined flux in latest and established models = 0.406546 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 19 components and 0.406546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128321Jy sigma=0.298182 ! Fit after self-cal, rms=0.128035Jy sigma=0.297562 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.191 mas, bmaj=1.851 mas, bpa=7.233 degrees ! Estimated noise=2.03009 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00692859 Jy ! Component: 100 - total flux cleaned = 0.00868688 Jy ! Component: 150 - total flux cleaned = 0.00869609 Jy ! Component: 200 - total flux cleaned = 0.00870143 Jy ! Total flux subtracted in 200 components = 0.00870143 Jy ! Clean residual min=-0.011370 max=0.017311 Jy/beam ! Clean residual mean=0.000010 rms=0.003446 Jy/beam ! Combined flux in latest and established models = 0.415247 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.415247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127467Jy sigma=0.296536 ! Fit after self-cal, rms=0.127406Jy sigma=0.296461 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.17 HN 0.95 KP 1.00 ! LA 1.00 MK 0.96 NL 0.94 OV 0.97 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.18 HN 0.98 KP 0.95 ! LA 0.96 MK 1.00 NL 0.95 OV 0.96 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.15 HN 1.00 KP 0.86 ! LA 1.02 MK 0.97 NL 1.00 OV 1.03 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.25 HN 0.99 KP 0.91 ! LA 1.02 MK 1.01 NL 1.02 OV 0.98 ! PT 1.01 SC 1.03 ! ! ! Fit before self-cal, rms=0.127406Jy sigma=0.296461 ! Fit after self-cal, rms=0.128539Jy sigma=0.282697 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.188 mas, bmaj=1.849 mas, bpa=6.681 degrees ! Estimated noise=2.02268 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220577 Jy ! Component: 100 - total flux cleaned = 0.00193722 Jy ! Component: 150 - total flux cleaned = 0.00159855 Jy ! Component: 200 - total flux cleaned = 0.0013641 Jy ! Total flux subtracted in 200 components = 0.0013641 Jy ! Clean residual min=-0.009969 max=0.012248 Jy/beam ! Clean residual mean=0.000027 rms=0.002735 Jy/beam ! Combined flux in latest and established models = 0.416611 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.416611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128351Jy sigma=0.282465 ! Fit after self-cal, rms=0.128385Jy sigma=0.282285 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128385Jy sigma=0.282285 ! Fit after self-cal, rms=0.132069Jy sigma=0.271642 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.187 mas, bmaj=1.85 mas, bpa=6.697 degrees ! Estimated noise=2.02006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014344 Jy ! Component: 100 - total flux cleaned = 0.00118445 Jy ! Component: 150 - total flux cleaned = 0.000981676 Jy ! Component: 200 - total flux cleaned = 0.000820111 Jy ! Total flux subtracted in 200 components = 0.000820111 Jy ! Clean residual min=-0.010179 max=0.009040 Jy/beam ! Clean residual mean=0.000002 rms=0.001914 Jy/beam ! Combined flux in latest and established models = 0.417431 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.417432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131866Jy sigma=0.271591 ! Fit after self-cal, rms=0.131942Jy sigma=0.271487 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000293881 Jy ! Component: 100 - total flux cleaned = -0.000452046 Jy ! Component: 150 - total flux cleaned = -0.0005846 Jy ! Component: 200 - total flux cleaned = -0.000660118 Jy ! Total flux subtracted in 200 components = -0.000660118 Jy ! Clean residual min=-0.010283 max=0.008894 Jy/beam ! Clean residual mean=0.000002 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 0.416771 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 45 components and 0.416771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131841Jy sigma=0.271471 ! Fit after self-cal, rms=0.131857Jy sigma=0.271430 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131857Jy sigma=0.271430 ! Fit after self-cal, rms=0.131976Jy sigma=0.271415 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.186 mas, bmaj=1.851 mas, bpa=6.816 degrees ! Estimated noise=2.02056 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236931 Jy ! Component: 100 - total flux cleaned = 0.00029182 Jy ! Component: 150 - total flux cleaned = 0.000252433 Jy ! Component: 200 - total flux cleaned = 0.000220847 Jy ! Total flux subtracted in 200 components = 0.000220847 Jy ! Clean residual min=-0.010212 max=0.008767 Jy/beam ! Clean residual mean=0.000002 rms=0.001916 Jy/beam ! Combined flux in latest and established models = 0.416992 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.416992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131899Jy sigma=0.271412 ! Fit after self-cal, rms=0.131919Jy sigma=0.271382 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000173649 Jy ! Component: 100 - total flux cleaned = -0.000129016 Jy ! Component: 150 - total flux cleaned = -9.36091e-05 Jy ! Component: 200 - total flux cleaned = -0.000122956 Jy ! Total flux subtracted in 200 components = -0.000122956 Jy ! Clean residual min=-0.010247 max=0.008689 Jy/beam ! Clean residual mean=0.000002 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 0.416869 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.416869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131861Jy sigma=0.271387 ! Fit after self-cal, rms=0.131879Jy sigma=0.271362 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131879Jy sigma=0.271362 ! Fit after self-cal, rms=0.131953Jy sigma=0.271357 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.35 mas, bmaj=2.831 mas, bpa=6.285 degrees ! Estimated noise=2.06626 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.61538e-05 Jy ! Component: 100 - total flux cleaned = 0.000119491 Jy ! Component: 150 - total flux cleaned = 0.000172346 Jy ! Component: 200 - total flux cleaned = 0.000171117 Jy ! Total flux subtracted in 200 components = 0.000171117 Jy ! Clean residual min=-0.011243 max=0.008720 Jy/beam ! Clean residual mean=0.000004 rms=0.002417 Jy/beam ! Combined flux in latest and established models = 0.41704 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 61 components and 0.41704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131957Jy sigma=0.271381 ! Fit after self-cal, rms=0.131960Jy sigma=0.271329 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.61873e-05 Jy ! Component: 100 - total flux cleaned = 0.000167055 Jy ! Component: 150 - total flux cleaned = 0.000127372 Jy ! Component: 200 - total flux cleaned = 8.94863e-05 Jy ! Total flux subtracted in 200 components = 8.94863e-05 Jy ! Clean residual min=-0.011190 max=0.008699 Jy/beam ! Clean residual mean=0.000004 rms=0.002416 Jy/beam ! Combined flux in latest and established models = 0.41713 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 65 components and 0.41713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131969Jy sigma=0.271363 ! Fit after self-cal, rms=0.131976Jy sigma=0.271328 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.186 mas, bmaj=1.851 mas, bpa=6.956 degrees ! Estimated noise=2.02111 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.186 x 1.851 at 6.956 degrees (North through East) ! Clean map min=-0.0097252 max=0.32339 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9044 mas, bmaj=1.471 mas, bpa=6.522 degrees ! Estimated noise=4.22122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.242863 Jy ! Component: 100 - total flux cleaned = 0.321528 Jy ! Component: 150 - total flux cleaned = 0.361454 Jy ! Component: 200 - total flux cleaned = 0.383798 Jy ! Total flux subtracted in 200 components = 0.383798 Jy ! Clean residual min=-0.008049 max=0.011205 Jy/beam ! Clean residual mean=0.000006 rms=0.002111 Jy/beam ! Combined flux in latest and established models = 0.383798 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.383798 Jy ! Inverting map and beam ! Estimated beam: bmin=1.186 mas, bmaj=1.851 mas, bpa=6.956 degrees ! Estimated noise=2.02111 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017845 Jy ! Component: 100 - total flux cleaned = 0.0269312 Jy ! Component: 150 - total flux cleaned = 0.0321618 Jy ! Component: 200 - total flux cleaned = 0.0334577 Jy ! Total flux subtracted in 200 components = 0.0334577 Jy ! Clean residual min=-0.009301 max=0.008297 Jy/beam ! Clean residual mean=0.000003 rms=0.001929 Jy/beam ! Combined flux in latest and established models = 0.417256 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 42 components and 0.417256 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.35 mas, bmaj=2.831 mas, bpa=6.285 degrees ! Estimated noise=2.06626 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185456 Jy ! Component: 100 - total flux cleaned = 0.00178114 Jy ! Component: 150 - total flux cleaned = 0.00164886 Jy ! Component: 200 - total flux cleaned = 0.00153149 Jy ! Total flux subtracted in 200 components = 0.00153149 Jy ! Clean residual min=-0.011093 max=0.008689 Jy/beam ! Clean residual mean=0.000005 rms=0.002430 Jy/beam ! Combined flux in latest and established models = 0.418788 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.4116e-05 Jy ! Component: 100 - total flux cleaned = -0.000156901 Jy ! Component: 150 - total flux cleaned = -0.000249582 Jy ! Component: 200 - total flux cleaned = -0.000292596 Jy ! Total flux subtracted in 200 components = -0.000292596 Jy ! Clean residual min=-0.011111 max=0.008709 Jy/beam ! Clean residual mean=0.000005 rms=0.002424 Jy/beam ! Combined flux in latest and established models = 0.418495 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.418495 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.186 mas, bmaj=1.851 mas, bpa=6.956 degrees ! Estimated noise=2.02111 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.30402e-05 Jy ! Component: 100 - total flux cleaned = -0.000304958 Jy ! Component: 150 - total flux cleaned = -0.000434811 Jy ! Component: 200 - total flux cleaned = -0.000602569 Jy ! Total flux subtracted in 200 components = -0.000602569 Jy ! Clean residual min=-0.009975 max=0.008592 Jy/beam ! Clean residual mean=0.000002 rms=0.001914 Jy/beam ! Combined flux in latest and established models = 0.417892 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.417892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131988Jy sigma=0.271330 ! Fit after self-cal, rms=0.131983Jy sigma=0.271277 wmodel /scr/pima/rdv93_uvs/J2114+2832_X_map.mod ! Writing 54 model components to file: /scr/pima/rdv93_uvs/J2114+2832_X_map.mod wobs /scr/pima/rdv93_uvs/J2114+2832_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv93_uvs/J2114+2832_X_uvs.fits wwins /scr/pima/rdv93_uvs/J2114+2832_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rdv93_uvs/J2114+2832_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146083 Jy ! Component: 100 - total flux cleaned = -0.00214348 Jy ! Component: 150 - total flux cleaned = -0.00357041 Jy ! Component: 200 - total flux cleaned = -0.00467093 Jy ! Component: 250 - total flux cleaned = -0.00537333 Jy ! Component: 300 - total flux cleaned = -0.00594078 Jy ! Component: 350 - total flux cleaned = -0.00649359 Jy ! Component: 400 - total flux cleaned = -0.00681639 Jy ! Component: 450 - total flux cleaned = -0.00681602 Jy ! Component: 500 - total flux cleaned = -0.00702181 Jy ! Component: 550 - total flux cleaned = -0.00702144 Jy ! Component: 600 - total flux cleaned = -0.00712055 Jy ! Component: 650 - total flux cleaned = -0.00731563 Jy ! Component: 700 - total flux cleaned = -0.00750575 Jy ! Component: 750 - total flux cleaned = -0.0077866 Jy ! Component: 800 - total flux cleaned = -0.0080639 Jy ! Component: 850 - total flux cleaned = -0.0079726 Jy ! Component: 900 - total flux cleaned = -0.00860394 Jy ! Component: 950 - total flux cleaned = -0.00860418 Jy ! Component: 1000 - total flux cleaned = -0.00877869 Jy ! Component: 1050 - total flux cleaned = -0.0087783 Jy ! Component: 1100 - total flux cleaned = -0.00886438 Jy ! Component: 1150 - total flux cleaned = -0.00886462 Jy ! Component: 1200 - total flux cleaned = -0.00911479 Jy ! Component: 1250 - total flux cleaned = -0.00903056 Jy ! Component: 1300 - total flux cleaned = -0.00911226 Jy ! Component: 1350 - total flux cleaned = -0.00927355 Jy ! Component: 1400 - total flux cleaned = -0.00919295 Jy ! Component: 1450 - total flux cleaned = -0.00927231 Jy ! Component: 1500 - total flux cleaned = -0.00935021 Jy ! Component: 1550 - total flux cleaned = -0.00935116 Jy ! Component: 1600 - total flux cleaned = -0.00919913 Jy ! Component: 1650 - total flux cleaned = -0.00920027 Jy ! Component: 1700 - total flux cleaned = -0.00912618 Jy ! Component: 1750 - total flux cleaned = -0.00912652 Jy ! Component: 1800 - total flux cleaned = -0.00905418 Jy ! Component: 1850 - total flux cleaned = -0.00905503 Jy ! Component: 1900 - total flux cleaned = -0.0093416 Jy ! Component: 1950 - total flux cleaned = -0.00934033 Jy ! Component: 2000 - total flux cleaned = -0.00941 Jy ! Component: 2050 - total flux cleaned = -0.0095492 Jy ! Component: 2100 - total flux cleaned = -0.00982504 Jy ! Component: 2150 - total flux cleaned = -0.0097564 Jy ! Component: 2200 - total flux cleaned = -0.00989071 Jy ! Component: 2250 - total flux cleaned = -0.010092 Jy ! Component: 2300 - total flux cleaned = -0.010025 Jy ! Component: 2350 - total flux cleaned = -0.010091 Jy ! Component: 2400 - total flux cleaned = -0.0100913 Jy ! Component: 2450 - total flux cleaned = -0.0102208 Jy ! Component: 2500 - total flux cleaned = -0.0102846 Jy ! Component: 2550 - total flux cleaned = -0.0101573 Jy ! Component: 2600 - total flux cleaned = -0.0102209 Jy ! Component: 2650 - total flux cleaned = -0.010284 Jy ! Component: 2700 - total flux cleaned = -0.0104703 Jy ! Component: 2750 - total flux cleaned = -0.0103474 Jy ! Component: 2800 - total flux cleaned = -0.0104085 Jy ! Component: 2850 - total flux cleaned = -0.0102874 Jy ! Component: 2900 - total flux cleaned = -0.0102269 Jy ! Component: 2950 - total flux cleaned = -0.0102273 Jy ! Component: 3000 - total flux cleaned = -0.0102861 Jy ! Component: 3050 - total flux cleaned = -0.0102856 Jy ! Component: 3100 - total flux cleaned = -0.010227 Jy ! Component: 3150 - total flux cleaned = -0.00999589 Jy ! Component: 3200 - total flux cleaned = -0.0102248 Jy ! Component: 3250 - total flux cleaned = -0.0101676 Jy ! Component: 3300 - total flux cleaned = -0.0100546 Jy ! Component: 3350 - total flux cleaned = -0.00999855 Jy ! Component: 3400 - total flux cleaned = -0.00994316 Jy ! Component: 3450 - total flux cleaned = -0.00977861 Jy ! Component: 3500 - total flux cleaned = -0.00977905 Jy ! Component: 3550 - total flux cleaned = -0.00983342 Jy ! Component: 3600 - total flux cleaned = -0.00972566 Jy ! Component: 3650 - total flux cleaned = -0.00988608 Jy ! Component: 3700 - total flux cleaned = -0.00962035 Jy ! Component: 3750 - total flux cleaned = -0.0096729 Jy ! Component: 3800 - total flux cleaned = -0.00967307 Jy ! Component: 3850 - total flux cleaned = -0.00951715 Jy ! Component: 3900 - total flux cleaned = -0.00941395 Jy ! Component: 3950 - total flux cleaned = -0.00951667 Jy ! Component: 4000 - total flux cleaned = -0.00941526 Jy ! Component: 4050 - total flux cleaned = -0.00916311 Jy ! Total flux subtracted in 4096 components = -0.0092634 Jy ! Clean residual min=-0.002712 max=0.003210 Jy/beam ! Clean residual mean=0.000001 rms=0.000932 Jy/beam ! Combined flux in latest and established models = 0.408629 Jy keep ! Adding 337 model components to the UV plane model. ! The established model now contains 391 components and 0.408629 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv93_uvs/J2114+2832_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.186 x 1.851 at 6.956 degrees (North through East) ! Clean map min=-0.0067801 max=0.32192 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv93_uvs/J2114+2832_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.321915 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00093013 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.866809 0.866809 1.73362 3.46724 6.93447 13.8689 27.7379 55.4758 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.321 quit ! Quitting program ! Log file /scr/pima/rdv93_uvs/J2114+2832_X_uvs.log closed on Tue Sep 24 17:09:57 2013