! Started logfile: /scr/pima/rdv93_uvs/J2114+2832_S_uvs.log on Tue Sep 24 17:09:30 2013 obs /scr/pima/rdv93_uvs/J2114+2832_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv93_uvs/J2114+2832_S_uva.fits ! AN table 1: 120 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.994444 visibilities/baseline/integration-bin. ! Found source: J2114+2832 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23693e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26693e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35693e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37693e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 21480 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv93_uvs/J2114+2832_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.076278Jy sigma=3.138352 ! Fit after self-cal, rms=0.667524Jy sigma=1.877549 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=5.873 mas, bpa=4.748 degrees ! Estimated noise=3.93383 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.266381 Jy ! Component: 100 - total flux cleaned = 0.332313 Jy ! Total flux subtracted in 100 components = 0.332313 Jy ! Clean residual min=-0.012021 max=0.024942 Jy/beam ! Clean residual mean=0.000017 rms=0.003146 Jy/beam ! Combined flux in latest and established models = 0.332313 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.332313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119228Jy sigma=0.330081 ! Fit after self-cal, rms=0.119268Jy sigma=0.330055 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257675 Jy ! Component: 100 - total flux cleaned = 0.0388509 Jy ! Total flux subtracted in 100 components = 0.0388509 Jy ! Clean residual min=-0.009765 max=0.010965 Jy/beam ! Clean residual mean=0.000022 rms=0.002465 Jy/beam ! Combined flux in latest and established models = 0.371164 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.371163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113396Jy sigma=0.308774 ! Fit after self-cal, rms=0.113449Jy sigma=0.308755 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.198 mas, bmaj=6.879 mas, bpa=3.855 degrees ! Estimated noise=1.7204 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00834277 Jy ! Component: 100 - total flux cleaned = 0.0124958 Jy ! Component: 150 - total flux cleaned = 0.0148226 Jy ! Component: 200 - total flux cleaned = 0.0154418 Jy ! Total flux subtracted in 200 components = 0.0154418 Jy ! Clean residual min=-0.008455 max=0.010197 Jy/beam ! Clean residual mean=0.000057 rms=0.002159 Jy/beam ! Combined flux in latest and established models = 0.386605 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 30 components and 0.386605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112871Jy sigma=0.306800 ! Fit after self-cal, rms=0.112870Jy sigma=0.306782 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 0.93 KP 1.04 ! LA 1.14 MK 1.00 NL 1.00 OV 1.00 ! PT 1.05 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.10 HN 1.03 KP 1.04 ! LA 1.04 MK 1.06 NL 1.04 OV 1.02 ! PT 1.06 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.07 HN 0.95 KP 0.90 ! LA 0.97 MK 1.02 NL 1.09 OV 1.03 ! PT 1.08 SC 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.92 KP 0.82 ! LA 0.81 MK 1.16 NL 1.02 OV 0.87 ! PT 0.95 SC 0.99 ! ! ! Fit before self-cal, rms=0.112870Jy sigma=0.306782 ! Fit after self-cal, rms=0.104397Jy sigma=0.270814 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.218 mas, bmaj=6.904 mas, bpa=4.092 degrees ! Estimated noise=1.72318 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00159254 Jy ! Component: 100 - total flux cleaned = -0.00159677 Jy ! Component: 150 - total flux cleaned = -0.00165129 Jy ! Component: 200 - total flux cleaned = -0.00169201 Jy ! Total flux subtracted in 200 components = -0.00169201 Jy ! Clean residual min=-0.005895 max=0.006267 Jy/beam ! Clean residual mean=0.000013 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 0.384913 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.384913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104308Jy sigma=0.270638 ! Fit after self-cal, rms=0.104362Jy sigma=0.270551 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104362Jy sigma=0.270551 ! Fit after self-cal, rms=0.104526Jy sigma=0.268889 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.229 mas, bmaj=6.921 mas, bpa=4.463 degrees ! Estimated noise=1.72473 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000766532 Jy ! Component: 100 - total flux cleaned = -0.000671591 Jy ! Component: 150 - total flux cleaned = -0.00072303 Jy ! Component: 200 - total flux cleaned = -0.000747399 Jy ! Total flux subtracted in 200 components = -0.000747399 Jy ! Clean residual min=-0.005761 max=0.006065 Jy/beam ! Clean residual mean=0.000009 rms=0.001269 Jy/beam ! Combined flux in latest and established models = 0.384166 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.384166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104496Jy sigma=0.268846 ! Fit after self-cal, rms=0.104492Jy sigma=0.268831 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18, -27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000658893 Jy ! Component: 100 - total flux cleaned = -0.000376902 Jy ! Component: 150 - total flux cleaned = -0.00107332 Jy ! Component: 200 - total flux cleaned = -0.00165197 Jy ! Total flux subtracted in 200 components = -0.00165197 Jy ! Clean residual min=-0.005481 max=0.005518 Jy/beam ! Clean residual mean=0.000007 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.382514 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 78 components and 0.382514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103965Jy sigma=0.267802 ! Fit after self-cal, rms=0.103911Jy sigma=0.267703 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103911Jy sigma=0.267703 ! Fit after self-cal, rms=0.103839Jy sigma=0.267624 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.236 mas, bmaj=6.924 mas, bpa=4.458 degrees ! Estimated noise=1.72315 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000474312 Jy ! Component: 100 - total flux cleaned = -0.00101019 Jy ! Component: 150 - total flux cleaned = -0.00155005 Jy ! Component: 200 - total flux cleaned = -0.00201536 Jy ! Total flux subtracted in 200 components = -0.00201536 Jy ! Clean residual min=-0.005313 max=0.005395 Jy/beam ! Clean residual mean=0.000007 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.380498 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 99 components and 0.380498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103645Jy sigma=0.267356 ! Fit after self-cal, rms=0.103624Jy sigma=0.267330 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (26.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000527516 Jy ! Component: 100 - total flux cleaned = -0.0020335 Jy ! Component: 150 - total flux cleaned = -0.0034413 Jy ! Component: 200 - total flux cleaned = -0.0045203 Jy ! Total flux subtracted in 200 components = -0.0045203 Jy ! Clean residual min=-0.004864 max=0.004594 Jy/beam ! Clean residual mean=0.000007 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.375978 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 121 components and 0.375978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103091Jy sigma=0.266271 ! Fit after self-cal, rms=0.103071Jy sigma=0.266238 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103071Jy sigma=0.266238 ! Fit after self-cal, rms=0.103111Jy sigma=0.266191 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.827 mas, bmaj=10.05 mas, bpa=0.5271 degrees ! Estimated noise=1.85614 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00073789 Jy ! Component: 100 - total flux cleaned = -0.000898638 Jy ! Component: 150 - total flux cleaned = -0.00118937 Jy ! Component: 200 - total flux cleaned = -0.00145148 Jy ! Total flux subtracted in 200 components = -0.00145148 Jy ! Clean residual min=-0.004787 max=0.004130 Jy/beam ! Clean residual mean=0.000008 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.374527 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 138 components and 0.374527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103001Jy sigma=0.265991 ! Fit after self-cal, rms=0.102979Jy sigma=0.265971 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000265939 Jy ! Component: 100 - total flux cleaned = -0.000384558 Jy ! Component: 150 - total flux cleaned = -0.000551907 Jy ! Component: 200 - total flux cleaned = -0.000758312 Jy ! Total flux subtracted in 200 components = -0.000758312 Jy ! Clean residual min=-0.004713 max=0.004122 Jy/beam ! Clean residual mean=0.000008 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.373768 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 154 components and 0.373768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102921Jy sigma=0.265871 ! Fit after self-cal, rms=0.102901Jy sigma=0.265856 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.241 mas, bmaj=6.928 mas, bpa=4.466 degrees ! Estimated noise=1.72243 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.241 x 6.928 at 4.466 degrees (North through East) ! Clean map min=-0.0062055 max=0.3522 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=5.924 mas, bpa=5.301 degrees ! Estimated noise=3.96842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.268585 Jy ! Component: 100 - total flux cleaned = 0.333355 Jy ! Component: 150 - total flux cleaned = 0.3576 Jy ! Component: 200 - total flux cleaned = 0.366354 Jy ! Total flux subtracted in 200 components = 0.366354 Jy ! Clean residual min=-0.007534 max=0.007051 Jy/beam ! Clean residual mean=0.000002 rms=0.001695 Jy/beam ! Combined flux in latest and established models = 0.366355 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.366355 Jy ! Inverting map and beam ! Estimated beam: bmin=4.241 mas, bmaj=6.928 mas, bpa=4.466 degrees ! Estimated noise=1.72243 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00724505 Jy ! Component: 100 - total flux cleaned = 0.00964027 Jy ! Component: 150 - total flux cleaned = 0.00963788 Jy ! Component: 200 - total flux cleaned = 0.00903728 Jy ! Total flux subtracted in 200 components = 0.00903728 Jy ! Clean residual min=-0.006130 max=0.005425 Jy/beam ! Clean residual mean=0.000004 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.375392 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 56 components and 0.375392 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.827 mas, bmaj=10.05 mas, bpa=0.5271 degrees ! Estimated noise=1.85614 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224221 Jy ! Component: 100 - total flux cleaned = 0.00166748 Jy ! Component: 150 - total flux cleaned = 0.00116505 Jy ! Component: 200 - total flux cleaned = 0.000712527 Jy ! Total flux subtracted in 200 components = 0.000712527 Jy ! Clean residual min=-0.005446 max=0.004386 Jy/beam ! Clean residual mean=0.000007 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.376104 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00031275 Jy ! Component: 100 - total flux cleaned = -0.000506197 Jy ! Component: 150 - total flux cleaned = -0.000688339 Jy ! Component: 200 - total flux cleaned = -0.000943164 Jy ! Total flux subtracted in 200 components = -0.000943164 Jy ! Clean residual min=-0.005185 max=0.004147 Jy/beam ! Clean residual mean=0.000007 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.375161 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 112 components and 0.375161 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.241 mas, bmaj=6.928 mas, bpa=4.466 degrees ! Estimated noise=1.72243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238697 Jy ! Component: 100 - total flux cleaned = -0.000121188 Jy ! Component: 150 - total flux cleaned = -0.000566138 Jy ! Component: 200 - total flux cleaned = -0.000873436 Jy ! Total flux subtracted in 200 components = -0.000873436 Jy ! Clean residual min=-0.004938 max=0.004595 Jy/beam ! Clean residual mean=0.000005 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.374288 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 137 components and 0.374288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103251Jy sigma=0.266221 ! Fit after self-cal, rms=0.103216Jy sigma=0.266185 wmodel /scr/pima/rdv93_uvs/J2114+2832_S_map.mod ! Writing 137 model components to file: /scr/pima/rdv93_uvs/J2114+2832_S_map.mod wobs /scr/pima/rdv93_uvs/J2114+2832_S_uvs.fits ! Writing UV FITS file: /scr/pima/rdv93_uvs/J2114+2832_S_uvs.fits wwins /scr/pima/rdv93_uvs/J2114+2832_S_map.win ! wwins: Wrote 3 windows to /scr/pima/rdv93_uvs/J2114+2832_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000539923 Jy ! Component: 100 - total flux cleaned = -0.000472113 Jy ! Component: 150 - total flux cleaned = 3.66803e-05 Jy ! Component: 200 - total flux cleaned = 0.000384084 Jy ! Component: 250 - total flux cleaned = 0.000784108 Jy ! Component: 300 - total flux cleaned = 0.00104089 Jy ! Component: 350 - total flux cleaned = 0.00116595 Jy ! Component: 400 - total flux cleaned = 0.00164997 Jy ! Component: 450 - total flux cleaned = 0.00188501 Jy ! Component: 500 - total flux cleaned = 0.00223161 Jy ! Component: 550 - total flux cleaned = 0.00257016 Jy ! Component: 600 - total flux cleaned = 0.00273547 Jy ! Component: 650 - total flux cleaned = 0.00300725 Jy ! Component: 700 - total flux cleaned = 0.0031689 Jy ! Component: 750 - total flux cleaned = 0.00348334 Jy ! Component: 800 - total flux cleaned = 0.00389353 Jy ! Component: 850 - total flux cleaned = 0.0040447 Jy ! Component: 900 - total flux cleaned = 0.00429423 Jy ! Component: 950 - total flux cleaned = 0.00453936 Jy ! Component: 1000 - total flux cleaned = 0.00478098 Jy ! Component: 1050 - total flux cleaned = 0.00506608 Jy ! Component: 1100 - total flux cleaned = 0.00534628 Jy ! Component: 1150 - total flux cleaned = 0.00548447 Jy ! Component: 1200 - total flux cleaned = 0.00575638 Jy ! Component: 1250 - total flux cleaned = 0.00584529 Jy ! Component: 1300 - total flux cleaned = 0.00593376 Jy ! Component: 1350 - total flux cleaned = 0.00610817 Jy ! Component: 1400 - total flux cleaned = 0.00615015 Jy ! Component: 1450 - total flux cleaned = 0.00614965 Jy ! Component: 1500 - total flux cleaned = 0.00615038 Jy ! Component: 1550 - total flux cleaned = 0.006358 Jy ! Component: 1600 - total flux cleaned = 0.006521 Jy ! Component: 1650 - total flux cleaned = 0.00652138 Jy ! Component: 1700 - total flux cleaned = 0.0067619 Jy ! Component: 1750 - total flux cleaned = 0.00688011 Jy ! Component: 1800 - total flux cleaned = 0.00695878 Jy ! Component: 1850 - total flux cleaned = 0.00711344 Jy ! Component: 1900 - total flux cleaned = 0.00730461 Jy ! Component: 1950 - total flux cleaned = 0.00749293 Jy ! Component: 2000 - total flux cleaned = 0.0076044 Jy ! Component: 2050 - total flux cleaned = 0.00767837 Jy ! Component: 2100 - total flux cleaned = 0.00786148 Jy ! Component: 2150 - total flux cleaned = 0.0078619 Jy ! Component: 2200 - total flux cleaned = 0.00811327 Jy ! Component: 2250 - total flux cleaned = 0.00818444 Jy ! Component: 2300 - total flux cleaned = 0.00843077 Jy ! Component: 2350 - total flux cleaned = 0.00839566 Jy ! Component: 2400 - total flux cleaned = 0.00867247 Jy ! Component: 2450 - total flux cleaned = 0.00860365 Jy ! Component: 2500 - total flux cleaned = 0.00877368 Jy ! Component: 2550 - total flux cleaned = 0.00890789 Jy ! Component: 2600 - total flux cleaned = 0.00900792 Jy ! Component: 2650 - total flux cleaned = 0.00917264 Jy ! Component: 2700 - total flux cleaned = 0.00930372 Jy ! Component: 2750 - total flux cleaned = 0.00940108 Jy ! Component: 2800 - total flux cleaned = 0.00953016 Jy ! Component: 2850 - total flux cleaned = 0.00962615 Jy ! Component: 2900 - total flux cleaned = 0.0097529 Jy ! Component: 2950 - total flux cleaned = 0.00987784 Jy ! Component: 3000 - total flux cleaned = 0.00993986 Jy ! Component: 3050 - total flux cleaned = 0.0100018 Jy ! Component: 3100 - total flux cleaned = 0.0101241 Jy ! Component: 3150 - total flux cleaned = 0.0101244 Jy ! Component: 3200 - total flux cleaned = 0.010365 Jy ! Component: 3250 - total flux cleaned = 0.0103946 Jy ! Component: 3300 - total flux cleaned = 0.0105133 Jy ! Component: 3350 - total flux cleaned = 0.0106012 Jy ! Component: 3400 - total flux cleaned = 0.0107759 Jy ! Component: 3450 - total flux cleaned = 0.0108625 Jy ! Component: 3500 - total flux cleaned = 0.011006 Jy ! Component: 3550 - total flux cleaned = 0.0111196 Jy ! Component: 3600 - total flux cleaned = 0.0111758 Jy ! Component: 3650 - total flux cleaned = 0.0113441 Jy ! Component: 3700 - total flux cleaned = 0.0114831 Jy ! Component: 3750 - total flux cleaned = 0.0115659 Jy ! Component: 3800 - total flux cleaned = 0.0117574 Jy ! Component: 3850 - total flux cleaned = 0.0118933 Jy ! Component: 3900 - total flux cleaned = 0.0120282 Jy ! Component: 3950 - total flux cleaned = 0.0121353 Jy ! Component: 4000 - total flux cleaned = 0.0122679 Jy ! Component: 4050 - total flux cleaned = 0.0124789 Jy ! Total flux subtracted in 4096 components = 0.012636 Jy ! Clean residual min=-0.001305 max=0.001340 Jy/beam ! Clean residual mean=0.000002 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.386924 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 463 components and 0.386924 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv93_uvs/J2114+2832_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.241 x 6.928 at 4.466 degrees (North through East) ! Clean map min=-0.0058838 max=0.35214 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv93_uvs/J2114+2832_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.352135 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000510857 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.435223 0.435223 0.870446 1.74089 3.48178 6.96357 13.9271 27.8543 55.7085 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.352 quit ! Quitting program ! Log file /scr/pima/rdv93_uvs/J2114+2832_S_uvs.log closed on Tue Sep 24 17:09:35 2013