! Started logfile: /scr/pima/rdv93_uvs/J1711-3338_S_uvs.log on Tue Sep 24 17:08:27 2013 obs /scr/pima/rdv93_uvs/J1711-3338_S_uva.fits ! Reading UV FITS file: /scr/pima/rdv93_uvs/J1711-3338_S_uva.fits ! AN table 1: 90 integrations on 10 of 10 possible baselines. ! AN table 2: 90 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.832975 visibilities/baseline/integration-bin. ! Found source: J1711-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23693e+09 1.6e+07 1 1.6e+07 ! 02 2 2.26693e+09 1.6e+07 1 1.6e+07 ! 03 3 2.35693e+09 1.6e+07 1 1.6e+07 ! 04 4 2.37693e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 9296 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv93_uvs/J1711-3338_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 7 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.013166Jy sigma=0.700941 ! Fit after self-cal, rms=0.902462Jy sigma=0.587404 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=12.11 mas, bmaj=35.67 mas, bpa=4.959 degrees ! Estimated noise=17.8429 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100617 Jy ! Component: 100 - total flux cleaned = 0.136705 Jy ! Total flux subtracted in 100 components = 0.136705 Jy ! Clean residual min=-0.014433 max=0.017575 Jy/beam ! Clean residual mean=-0.000009 rms=0.006156 Jy/beam ! Combined flux in latest and established models = 0.136705 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.136705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117637Jy sigma=0.073779 ! Fit after self-cal, rms=0.117416Jy sigma=0.073299 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=14.12 mas, bmaj=40.84 mas, bpa=3.388 degrees ! Estimated noise=12.4148 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240131 Jy ! Component: 100 - total flux cleaned = 0.0331866 Jy ! Component: 150 - total flux cleaned = 0.0369417 Jy ! Component: 200 - total flux cleaned = 0.0395535 Jy ! Total flux subtracted in 200 components = 0.0395535 Jy ! Clean residual min=-0.004887 max=0.004915 Jy/beam ! Clean residual mean=-0.000015 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 0.176259 Jy ! Performing phase self-cal ! Adding 118 model components to the UV plane model. ! The established model now contains 159 components and 0.176259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113103Jy sigma=0.068217 ! Fit after self-cal, rms=0.113499Jy sigma=0.068153 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 LA 1.10 NL 1.09 OV 0.87 ! PT 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 KP 0.99 LA 1.15 ! NL 0.91 OV 0.93 PT 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 LA 1.00 NL 1.09 OV 0.82 ! PT 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.12 FD 1.02 KP 0.97 LA 1.04 ! NL 0.90 OV 0.95 PT 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 LA 0.95 NL 1.15 OV 0.84 ! PT 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.10 KP 0.93 LA 0.95 ! NL 1.04 OV 1.02 PT 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.99 LA 0.77 NL 1.01 OV 0.76 ! PT 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.22 FD 0.99 KP 0.79 LA 0.79 ! NL 0.87 OV 0.89 PT 0.95 ! ! ! Fit before self-cal, rms=0.113499Jy sigma=0.068153 ! Fit after self-cal, rms=0.106942Jy sigma=0.066078 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=14.21 mas, bmaj=41.87 mas, bpa=2.754 degrees ! Estimated noise=11.7487 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026768 Jy ! Component: 100 - total flux cleaned = 0.00411255 Jy ! Component: 150 - total flux cleaned = 0.00479525 Jy ! Component: 200 - total flux cleaned = 0.00492341 Jy ! Total flux subtracted in 200 components = 0.00492341 Jy ! Clean residual min=-0.001897 max=0.001894 Jy/beam ! Clean residual mean=-0.000006 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.181182 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 223 components and 0.181182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106257Jy sigma=0.065922 ! Fit after self-cal, rms=0.106630Jy sigma=0.065855 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106630Jy sigma=0.065855 ! Fit after self-cal, rms=0.106841Jy sigma=0.065840 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.21 mas, bmaj=41.86 mas, bpa=2.627 degrees ! Estimated noise=11.7099 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011563 Jy ! Component: 100 - total flux cleaned = 0.00104036 Jy ! Component: 150 - total flux cleaned = 0.000746087 Jy ! Component: 200 - total flux cleaned = 0.000565183 Jy ! Total flux subtracted in 200 components = 0.000565183 Jy ! Clean residual min=-0.001368 max=0.001382 Jy/beam ! Clean residual mean=-0.000004 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.181748 Jy selfcal ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 285 components and 0.181747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106496Jy sigma=0.065766 ! Fit after self-cal, rms=0.106671Jy sigma=0.065759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000177228 Jy ! Component: 100 - total flux cleaned = -0.00026178 Jy ! Component: 150 - total flux cleaned = -0.00018644 Jy ! Component: 200 - total flux cleaned = -0.00031841 Jy ! Total flux subtracted in 200 components = -0.00031841 Jy ! Clean residual min=-0.001067 max=0.001061 Jy/beam ! Clean residual mean=0.000000 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.181429 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 333 components and 0.181429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106485Jy sigma=0.065721 ! Fit after self-cal, rms=0.106577Jy sigma=0.065716 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106577Jy sigma=0.065716 ! Fit after self-cal, rms=0.106844Jy sigma=0.065711 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.22 mas, bmaj=41.86 mas, bpa=2.665 degrees ! Estimated noise=11.6847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000262754 Jy ! Component: 100 - total flux cleaned = -0.00085297 Jy ! Component: 150 - total flux cleaned = -0.00120075 Jy ! Component: 200 - total flux cleaned = -0.00152284 Jy ! Total flux subtracted in 200 components = -0.00152284 Jy ! Clean residual min=-0.000868 max=0.000864 Jy/beam ! Clean residual mean=-0.000002 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.179906 Jy selfcal ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 383 components and 0.179906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106720Jy sigma=0.065687 ! Fit after self-cal, rms=0.106810Jy sigma=0.065684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000705332 Jy ! Component: 100 - total flux cleaned = -0.00150618 Jy ! Component: 150 - total flux cleaned = -0.00195048 Jy ! Component: 200 - total flux cleaned = -0.00232137 Jy ! Total flux subtracted in 200 components = -0.00232137 Jy ! Clean residual min=-0.000736 max=0.000736 Jy/beam ! Clean residual mean=-0.000001 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.177585 Jy ! Performing phase self-cal ! Adding 81 model components to the UV plane model. ! The established model now contains 432 components and 0.177585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106728Jy sigma=0.065669 ! Fit after self-cal, rms=0.106785Jy sigma=0.065668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106785Jy sigma=0.065668 ! Fit after self-cal, rms=0.106944Jy sigma=0.065666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=15.11 mas, bmaj=43.47 mas, bpa=3.707 degrees ! Estimated noise=11.1204 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000410161 Jy ! Component: 100 - total flux cleaned = -0.000893854 Jy ! Component: 150 - total flux cleaned = -0.00130591 Jy ! Component: 200 - total flux cleaned = -0.00159201 Jy ! Total flux subtracted in 200 components = -0.00159201 Jy ! Clean residual min=-0.000584 max=0.000580 Jy/beam ! Clean residual mean=-0.000003 rms=0.000247 Jy/beam ! Combined flux in latest and established models = 0.175993 Jy selfcal ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 479 components and 0.175993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106890Jy sigma=0.065656 ! Fit after self-cal, rms=0.106936Jy sigma=0.065655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000578921 Jy ! Component: 100 - total flux cleaned = -0.000898488 Jy ! Component: 150 - total flux cleaned = -0.00110228 Jy ! Component: 200 - total flux cleaned = -0.00129886 Jy ! Total flux subtracted in 200 components = -0.00129886 Jy ! Clean residual min=-0.000536 max=0.000537 Jy/beam ! Clean residual mean=-0.000001 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.174694 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 528 components and 0.174694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106893Jy sigma=0.065646 ! Fit after self-cal, rms=0.106924Jy sigma=0.065646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=14.23 mas, bmaj=41.88 mas, bpa=2.695 degrees ! Estimated noise=11.6694 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 14.23 x 41.88 at 2.695 degrees (North through East) ! Clean map min=-0.0039378 max=0.10846 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12.27 mas, bmaj=36.44 mas, bpa=4.353 degrees ! Estimated noise=16.9302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0952836 Jy ! Component: 100 - total flux cleaned = 0.132341 Jy ! Component: 150 - total flux cleaned = 0.152462 Jy ! Component: 200 - total flux cleaned = 0.15748 Jy ! Total flux subtracted in 200 components = 0.15748 Jy ! Clean residual min=-0.007237 max=0.007330 Jy/beam ! Clean residual mean=-0.000036 rms=0.002956 Jy/beam ! Combined flux in latest and established models = 0.15748 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 96 model components to the UV plane model. ! The established model now contains 96 components and 0.15748 Jy ! Inverting map and beam ! Estimated beam: bmin=14.23 mas, bmaj=41.88 mas, bpa=2.695 degrees ! Estimated noise=11.6694 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00644394 Jy ! Component: 100 - total flux cleaned = 0.010057 Jy ! Component: 150 - total flux cleaned = 0.0112864 Jy ! Component: 200 - total flux cleaned = 0.011927 Jy ! Total flux subtracted in 200 components = 0.011927 Jy ! Clean residual min=-0.003052 max=0.003066 Jy/beam ! Clean residual mean=-0.000044 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.169407 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 192 components and 0.169407 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=15.11 mas, bmaj=43.47 mas, bpa=3.707 degrees ! Estimated noise=11.1204 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200679 Jy ! Component: 100 - total flux cleaned = -0.000210801 Jy ! Component: 150 - total flux cleaned = -0.000448284 Jy ! Component: 200 - total flux cleaned = -0.00087568 Jy ! Total flux subtracted in 200 components = -0.00087568 Jy ! Clean residual min=-0.001632 max=0.001622 Jy/beam ! Clean residual mean=-0.000022 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.168531 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000171659 Jy ! Component: 100 - total flux cleaned = -8.7085e-05 Jy ! Component: 150 - total flux cleaned = -6.04679e-06 Jy ! Component: 200 - total flux cleaned = 0.000206638 Jy ! Total flux subtracted in 200 components = 0.000206638 Jy ! Clean residual min=-0.001117 max=0.001131 Jy/beam ! Clean residual mean=-0.000004 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.168738 Jy ! Adding 135 model components to the UV plane model. ! The established model now contains 317 components and 0.168738 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=14.23 mas, bmaj=41.88 mas, bpa=2.695 degrees ! Estimated noise=11.6694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000846792 Jy ! Component: 100 - total flux cleaned = -0.00127864 Jy ! Component: 150 - total flux cleaned = -0.00150619 Jy ! Component: 200 - total flux cleaned = -0.00155756 Jy ! Total flux subtracted in 200 components = -0.00155756 Jy ! Clean residual min=-0.000827 max=0.000829 Jy/beam ! Clean residual mean=-0.000003 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.167181 Jy selfcal ! Performing phase self-cal ! Adding 82 model components to the UV plane model. ! The established model now contains 397 components and 0.167181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107003Jy sigma=0.065665 ! Fit after self-cal, rms=0.106980Jy sigma=0.065661 wmodel /scr/pima/rdv93_uvs/J1711-3338_S_map.mod ! Writing 397 model components to file: /scr/pima/rdv93_uvs/J1711-3338_S_map.mod wobs /scr/pima/rdv93_uvs/J1711-3338_S_uvs.fits ! Writing UV FITS file: /scr/pima/rdv93_uvs/J1711-3338_S_uvs.fits wwins /scr/pima/rdv93_uvs/J1711-3338_S_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: /home/lpetrov/bin/01_muppet] ! wmap "/scr/pima/rdv93_uvs/J1711-3338_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 14.23 x 41.88 at 2.695 degrees (North through East) ! Clean map min=-0.0035629 max=0.10418 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv93_uvs/J1711-3338_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.104182 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000360465 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03798 1.03798 2.07597 4.15194 8.30387 16.6077 33.2155 66.431 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.104 quit ! Quitting program ! Log file /scr/pima/rdv93_uvs/J1711-3338_S_uvs.log closed on Tue Sep 24 17:08:31 2013