! Started logfile: /scr/pima/rdv93_uvs/J1543-0757_X_uvs.log on Tue Sep 24 17:08:30 2013 obs /scr/pima/rdv93_uvs/J1543-0757_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv93_uvs/J1543-0757_X_uva.fits ! AN table 1: 90 integrations on 36 of 36 possible baselines. ! AN table 2: 90 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.564609 visibilities/baseline/integration-bin. ! Found source: J1543-0757 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47993e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79493e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89993e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 16464 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv93_uvs/J1543-0757_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 90 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 90 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! A total of 96 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.011096Jy sigma=1.566107 ! Fit after self-cal, rms=0.857914Jy sigma=1.038720 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.117 mas, bmaj=4.101 mas, bpa=32.12 degrees ! Estimated noise=10.7077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.183787 Jy ! Component: 100 - total flux cleaned = 0.26477 Jy ! Total flux subtracted in 100 components = 0.26477 Jy ! Clean residual min=-0.039553 max=0.042049 Jy/beam ! Clean residual mean=0.000210 rms=0.014268 Jy/beam ! Combined flux in latest and established models = 0.26477 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.26477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139653Jy sigma=0.342061 ! Fit after self-cal, rms=0.138959Jy sigma=0.341881 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=4.828 mas, bpa=29.14 degrees ! Estimated noise=4.71194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0843957 Jy ! Component: 100 - total flux cleaned = 0.132137 Jy ! Component: 150 - total flux cleaned = 0.161866 Jy ! Component: 200 - total flux cleaned = 0.180703 Jy ! Total flux subtracted in 200 components = 0.180703 Jy ! Clean residual min=-0.030069 max=0.047338 Jy/beam ! Clean residual mean=0.000017 rms=0.012790 Jy/beam ! Combined flux in latest and established models = 0.445473 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 111 components and 0.445473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128415Jy sigma=0.202075 ! Fit after self-cal, rms=0.126465Jy sigma=0.201635 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.43 HN 1.17 LA 0.85 ! MK 1.00* NL 0.75 OV 1.75 PT 0.83 ! SC 1.06 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.15 HN 0.54 KP 0.96 ! LA 0.95 MK 1.00* NL 1.47 OV 0.94 ! PT 1.00 SC 1.19 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.47 HN 1.10 LA 0.82 ! MK 1.00* NL 0.81 OV 1.78 PT 0.84 ! SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.21 HN 0.58 KP 0.94 ! LA 0.90 MK 1.00* NL 1.41 OV 0.95 ! PT 0.99 SC 1.36 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.31 HN 0.90 LA 0.87 ! MK 1.00* NL 0.74 OV 1.92 PT 0.87 ! SC 1.16 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.78 FD 1.04 HN 0.67 KP 0.94 ! LA 0.95 MK 1.00* NL 1.37 OV 1.15 ! PT 0.99 SC 1.51 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.36 HN 0.79 LA 0.88 ! MK 1.00* NL 0.67 OV 1.98 PT 0.89 ! SC 1.33 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.80 FD 1.09 HN 0.66 KP 1.04 ! LA 0.90 MK 1.00* NL 1.38 OV 1.09 ! PT 1.06 SC 1.46 ! ! ! Fit before self-cal, rms=0.126465Jy sigma=0.201635 ! Fit after self-cal, rms=0.141685Jy sigma=0.150537 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=4.779 mas, bpa=25.25 degrees ! Estimated noise=4.6362 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0034421 Jy ! Component: 100 - total flux cleaned = -0.00422869 Jy ! Component: 150 - total flux cleaned = -0.00454443 Jy ! Component: 200 - total flux cleaned = -0.0048193 Jy ! Total flux subtracted in 200 components = -0.0048193 Jy ! Clean residual min=-0.015334 max=0.025942 Jy/beam ! Clean residual mean=-0.000001 rms=0.005596 Jy/beam ! Combined flux in latest and established models = 0.440654 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 124 components and 0.440654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140848Jy sigma=0.150804 ! Fit after self-cal, rms=0.141752Jy sigma=0.150535 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141752Jy sigma=0.150535 ! Fit after self-cal, rms=0.142087Jy sigma=0.150265 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.938 mas, bmaj=4.735 mas, bpa=23.61 degrees ! Estimated noise=4.59755 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00318114 Jy ! Component: 100 - total flux cleaned = -0.00394513 Jy ! Component: 150 - total flux cleaned = -0.00453687 Jy ! Component: 200 - total flux cleaned = -0.00469975 Jy ! Total flux subtracted in 200 components = -0.00469975 Jy ! Clean residual min=-0.014517 max=0.025299 Jy/beam ! Clean residual mean=-0.000001 rms=0.005471 Jy/beam ! Combined flux in latest and established models = 0.435954 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 134 components and 0.435954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141444Jy sigma=0.150534 ! Fit after self-cal, rms=0.141609Jy sigma=0.150436 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19, 7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102345 Jy ! Component: 100 - total flux cleaned = 0.00704054 Jy ! Component: 150 - total flux cleaned = 0.0088292 Jy ! Component: 200 - total flux cleaned = 0.0106149 Jy ! Total flux subtracted in 200 components = 0.0106149 Jy ! Clean residual min=-0.012853 max=0.013622 Jy/beam ! Clean residual mean=0.000006 rms=0.004087 Jy/beam ! Combined flux in latest and established models = 0.446569 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 167 components and 0.446569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136860Jy sigma=0.144140 ! Fit after self-cal, rms=0.136220Jy sigma=0.143320 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136220Jy sigma=0.143320 ! Fit after self-cal, rms=0.130313Jy sigma=0.142373 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=4.772 mas, bpa=24.03 degrees ! Estimated noise=4.53833 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00448532 Jy ! Component: 100 - total flux cleaned = 0.00475411 Jy ! Component: 150 - total flux cleaned = 0.00497494 Jy ! Component: 200 - total flux cleaned = 0.00578486 Jy ! Total flux subtracted in 200 components = 0.00578486 Jy ! Clean residual min=-0.010190 max=0.011485 Jy/beam ! Clean residual mean=-0.000004 rms=0.003344 Jy/beam ! Combined flux in latest and established models = 0.452354 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 207 components and 0.452354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128821Jy sigma=0.140722 ! Fit after self-cal, rms=0.128587Jy sigma=0.140526 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162629 Jy ! Component: 100 - total flux cleaned = 0.00309425 Jy ! Component: 150 - total flux cleaned = 0.0039196 Jy ! Component: 200 - total flux cleaned = 0.00406566 Jy ! Total flux subtracted in 200 components = 0.00406566 Jy ! Clean residual min=-0.009475 max=0.010801 Jy/beam ! Clean residual mean=-0.000003 rms=0.003156 Jy/beam ! Combined flux in latest and established models = 0.456419 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 230 components and 0.456419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127907Jy sigma=0.140071 ! Fit after self-cal, rms=0.127846Jy sigma=0.140011 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127846Jy sigma=0.140011 ! Fit after self-cal, rms=0.127226Jy sigma=0.139704 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.879 mas, bmaj=5.539 mas, bpa=21.97 degrees ! Estimated noise=3.88419 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000299399 Jy ! Component: 100 - total flux cleaned = 0.000139576 Jy ! Component: 150 - total flux cleaned = 0.000137956 Jy ! Component: 200 - total flux cleaned = 0.000137839 Jy ! Total flux subtracted in 200 components = 0.000137839 Jy ! Clean residual min=-0.008937 max=0.010656 Jy/beam ! Clean residual mean=0.000001 rms=0.003103 Jy/beam ! Combined flux in latest and established models = 0.456557 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 260 components and 0.456557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126759Jy sigma=0.139398 ! Fit after self-cal, rms=0.126714Jy sigma=0.139357 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517419 Jy ! Component: 100 - total flux cleaned = 0.000637063 Jy ! Component: 150 - total flux cleaned = 0.000939892 Jy ! Component: 200 - total flux cleaned = 0.00102847 Jy ! Total flux subtracted in 200 components = 0.00102847 Jy ! Clean residual min=-0.008704 max=0.010477 Jy/beam ! Clean residual mean=0.000003 rms=0.003036 Jy/beam ! Combined flux in latest and established models = 0.457586 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 270 components and 0.457586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126444Jy sigma=0.139228 ! Fit after self-cal, rms=0.126440Jy sigma=0.139208 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=4.797 mas, bpa=24.41 degrees ! Estimated noise=4.54074 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.985 x 4.797 at 24.41 degrees (North through East) ! Clean map min=-0.017355 max=0.22974 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.184 mas, bmaj=3.959 mas, bpa=27.21 degrees ! Estimated noise=10.6476 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.184382 Jy ! Component: 100 - total flux cleaned = 0.267518 Jy ! Component: 150 - total flux cleaned = 0.315897 Jy ! Component: 200 - total flux cleaned = 0.345067 Jy ! Total flux subtracted in 200 components = 0.345067 Jy ! Clean residual min=-0.024237 max=0.027683 Jy/beam ! Clean residual mean=0.000121 rms=0.008613 Jy/beam ! Combined flux in latest and established models = 0.345067 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 58 model components to the UV plane model. ! The established model now contains 58 components and 0.345067 Jy ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=4.797 mas, bpa=24.41 degrees ! Estimated noise=4.54074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0395834 Jy ! Component: 100 - total flux cleaned = 0.0499986 Jy ! Component: 150 - total flux cleaned = 0.0565923 Jy ! Component: 200 - total flux cleaned = 0.0619587 Jy ! Total flux subtracted in 200 components = 0.0619587 Jy ! Clean residual min=-0.016604 max=0.021132 Jy/beam ! Clean residual mean=0.000078 rms=0.005676 Jy/beam ! Combined flux in latest and established models = 0.407026 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 116 components and 0.407026 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.879 mas, bmaj=5.539 mas, bpa=21.97 degrees ! Estimated noise=3.88419 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00864917 Jy ! Component: 100 - total flux cleaned = 0.0127518 Jy ! Component: 150 - total flux cleaned = 0.0162652 Jy ! Component: 200 - total flux cleaned = 0.0192841 Jy ! Total flux subtracted in 200 components = 0.0192841 Jy ! Clean residual min=-0.013767 max=0.016329 Jy/beam ! Clean residual mean=0.000051 rms=0.004270 Jy/beam ! Combined flux in latest and established models = 0.42631 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262501 Jy ! Component: 100 - total flux cleaned = 0.00489428 Jy ! Component: 150 - total flux cleaned = 0.0064561 Jy ! Component: 200 - total flux cleaned = 0.00842505 Jy ! Total flux subtracted in 200 components = 0.00842505 Jy ! Clean residual min=-0.012172 max=0.013332 Jy/beam ! Clean residual mean=0.000034 rms=0.003584 Jy/beam ! Combined flux in latest and established models = 0.434735 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 167 components and 0.434735 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=4.797 mas, bpa=24.41 degrees ! Estimated noise=4.54074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000776351 Jy ! Component: 100 - total flux cleaned = 0.00209609 Jy ! Component: 150 - total flux cleaned = 0.00312727 Jy ! Component: 200 - total flux cleaned = 0.00417854 Jy ! Total flux subtracted in 200 components = 0.00417854 Jy ! Clean residual min=-0.011453 max=0.011465 Jy/beam ! Clean residual mean=0.000023 rms=0.003207 Jy/beam ! Combined flux in latest and established models = 0.438913 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 191 components and 0.438913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128000Jy sigma=0.140175 ! Fit after self-cal, rms=0.127890Jy sigma=0.140080 wmodel /scr/pima/rdv93_uvs/J1543-0757_X_map.mod ! Writing 191 model components to file: /scr/pima/rdv93_uvs/J1543-0757_X_map.mod wobs /scr/pima/rdv93_uvs/J1543-0757_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv93_uvs/J1543-0757_X_uvs.fits wwins /scr/pima/rdv93_uvs/J1543-0757_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rdv93_uvs/J1543-0757_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257744 Jy ! Component: 100 - total flux cleaned = 0.00577868 Jy ! Component: 150 - total flux cleaned = 0.00876583 Jy ! Component: 200 - total flux cleaned = 0.0114002 Jy ! Component: 250 - total flux cleaned = 0.0138679 Jy ! Component: 300 - total flux cleaned = 0.0157841 Jy ! Component: 350 - total flux cleaned = 0.0169561 Jy ! Component: 400 - total flux cleaned = 0.0175832 Jy ! Component: 450 - total flux cleaned = 0.0184259 Jy ! Component: 500 - total flux cleaned = 0.0187737 Jy ! Component: 550 - total flux cleaned = 0.0191094 Jy ! Component: 600 - total flux cleaned = 0.0193282 Jy ! Component: 650 - total flux cleaned = 0.0196426 Jy ! Component: 700 - total flux cleaned = 0.0197449 Jy ! Component: 750 - total flux cleaned = 0.0203344 Jy ! Component: 800 - total flux cleaned = 0.0208089 Jy ! Component: 850 - total flux cleaned = 0.0208998 Jy ! Component: 900 - total flux cleaned = 0.0209889 Jy ! Component: 950 - total flux cleaned = 0.0212541 Jy ! Component: 1000 - total flux cleaned = 0.0216851 Jy ! Component: 1050 - total flux cleaned = 0.021769 Jy ! Component: 1100 - total flux cleaned = 0.0220158 Jy ! Component: 1150 - total flux cleaned = 0.0224186 Jy ! Component: 1200 - total flux cleaned = 0.0226563 Jy ! Component: 1250 - total flux cleaned = 0.0229669 Jy ! Component: 1300 - total flux cleaned = 0.0232733 Jy ! Component: 1350 - total flux cleaned = 0.0238731 Jy ! Component: 1400 - total flux cleaned = 0.0243158 Jy ! Component: 1450 - total flux cleaned = 0.0247496 Jy ! Component: 1500 - total flux cleaned = 0.0252477 Jy ! Component: 1550 - total flux cleaned = 0.0256672 Jy ! Component: 1600 - total flux cleaned = 0.0262868 Jy ! Component: 1650 - total flux cleaned = 0.0264222 Jy ! Component: 1700 - total flux cleaned = 0.0269561 Jy ! Component: 1750 - total flux cleaned = 0.0273502 Jy ! Component: 1800 - total flux cleaned = 0.0276088 Jy ! Component: 1850 - total flux cleaned = 0.0279919 Jy ! Component: 1900 - total flux cleaned = 0.0283687 Jy ! Component: 1950 - total flux cleaned = 0.028554 Jy ! Component: 2000 - total flux cleaned = 0.028737 Jy ! Component: 2050 - total flux cleaned = 0.0289165 Jy ! Component: 2100 - total flux cleaned = 0.0290346 Jy ! Component: 2150 - total flux cleaned = 0.0291507 Jy ! Component: 2200 - total flux cleaned = 0.0293231 Jy ! Component: 2250 - total flux cleaned = 0.029493 Jy ! Component: 2300 - total flux cleaned = 0.0295485 Jy ! Component: 2350 - total flux cleaned = 0.029605 Jy ! Component: 2400 - total flux cleaned = 0.0297697 Jy ! Component: 2450 - total flux cleaned = 0.0298771 Jy ! Component: 2500 - total flux cleaned = 0.0299833 Jy ! Component: 2550 - total flux cleaned = 0.0298777 Jy ! Component: 2600 - total flux cleaned = 0.0300863 Jy ! Component: 2650 - total flux cleaned = 0.0301881 Jy ! Component: 2700 - total flux cleaned = 0.030391 Jy ! Component: 2750 - total flux cleaned = 0.0304925 Jy ! Component: 2800 - total flux cleaned = 0.030741 Jy ! Component: 2850 - total flux cleaned = 0.0308386 Jy ! Component: 2900 - total flux cleaned = 0.0309839 Jy ! Component: 2950 - total flux cleaned = 0.0310801 Jy ! Component: 3000 - total flux cleaned = 0.0313182 Jy ! Component: 3050 - total flux cleaned = 0.0315539 Jy ! Component: 3100 - total flux cleaned = 0.0316463 Jy ! Component: 3150 - total flux cleaned = 0.0317392 Jy ! Component: 3200 - total flux cleaned = 0.0319219 Jy ! Component: 3250 - total flux cleaned = 0.031967 Jy ! Component: 3300 - total flux cleaned = 0.0321464 Jy ! Component: 3350 - total flux cleaned = 0.0324127 Jy ! Component: 3400 - total flux cleaned = 0.032588 Jy ! Component: 3450 - total flux cleaned = 0.032719 Jy ! Component: 3500 - total flux cleaned = 0.032977 Jy ! Component: 3550 - total flux cleaned = 0.0331051 Jy ! Component: 3600 - total flux cleaned = 0.0333584 Jy ! Component: 3650 - total flux cleaned = 0.0335673 Jy ! Component: 3700 - total flux cleaned = 0.0337748 Jy ! Component: 3750 - total flux cleaned = 0.034021 Jy ! Component: 3800 - total flux cleaned = 0.0342238 Jy ! Component: 3850 - total flux cleaned = 0.0343854 Jy ! Component: 3900 - total flux cleaned = 0.0345454 Jy ! Component: 3950 - total flux cleaned = 0.0347827 Jy ! Component: 4000 - total flux cleaned = 0.0350178 Jy ! Component: 4050 - total flux cleaned = 0.0352117 Jy ! Total flux subtracted in 4096 components = 0.0352892 Jy ! Clean residual min=-0.002137 max=0.001919 Jy/beam ! Clean residual mean=0.000003 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.474203 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 479 components and 0.474203 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv93_uvs/J1543-0757_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.985 x 4.797 at 24.41 degrees (North through East) ! Clean map min=-0.01672 max=0.23208 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv93_uvs/J1543-0757_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.232081 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00078943 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.02046 1.02046 2.04092 4.08184 8.16368 16.3274 32.6547 65.3094 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.232 quit ! Quitting program ! Log file /scr/pima/rdv93_uvs/J1543-0757_X_uvs.log closed on Tue Sep 24 17:08:35 2013