! Started logfile: /scr/pima/rdv93_uvs/J1332-1402_S_uvs.log on Tue Sep 24 17:07:32 2013
obs /scr/pima/rdv93_uvs/J1332-1402_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv93_uvs/J1332-1402_S_uva.fits
! AN table 1: 180 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.995679 visibilities/baseline/integration-bin.
! Found source: J1332-1402
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09      1.6e+07          1      1.6e+07
!  02        2  2.26693e+09      1.6e+07          1      1.6e+07
!  03        3  2.35693e+09      1.6e+07          1      1.6e+07
!  04        4  2.37693e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 32260 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv93_uvs/J1332-1402_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.023268Jy  sigma=0.987771
! Fit after  self-cal, rms=0.864660Jy  sigma=0.829935
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.651 mas, bmaj=6.56 mas, bpa=-0.9437 degrees
! Estimated noise=8.93448 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.114957 Jy
! Component: 100  -  total flux cleaned = 0.140025 Jy
! Total flux subtracted in 100 components = 0.140025 Jy
! Clean residual min=-0.009748 max=0.011239 Jy/beam
! Clean residual mean=0.000003 rms=0.002165 Jy/beam
! Combined flux in latest and established models = 0.140025 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.140025 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141411Jy  sigma=0.115969
! Fit after  self-cal, rms=0.141375Jy  sigma=0.115949
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.403 mas, bmaj=8.249 mas, bpa=-1.322 degrees
! Estimated noise=4.2006 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.5, 15).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114175 Jy
! Component: 100  -  total flux cleaned = 0.0176965 Jy
! Component: 150  -  total flux cleaned = 0.0217529 Jy
! Component: 200  -  total flux cleaned = 0.0227557 Jy
! Total flux subtracted in 200 components = 0.0227557 Jy
! Clean residual min=-0.005590 max=0.008981 Jy/beam
! Clean residual mean=0.000008 rms=0.001602 Jy/beam
! Combined flux in latest and established models = 0.16278 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 30 components and 0.16278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140528Jy  sigma=0.114641
! Fit after  self-cal, rms=0.140485Jy  sigma=0.114525
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        0.97     KP        1.10     
!   LA        1.11     MK        0.67     NL        1.03     OV        0.95     
!   PT        1.03     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        1.06     KP        1.10     
!   LA        0.99     MK        1.16     NL        1.06     OV        0.98     
!   PT        1.05     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.04     HN        0.99     KP        0.95     
!   LA        0.94     MK        1.10     NL        1.18     OV        0.97     
!   PT        1.08     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.99     HN        0.96     KP        0.86     
!   LA        0.77     MK        1.27     NL        1.06     OV        0.82     
!   PT        0.97     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.140485Jy  sigma=0.114525
! Fit after  self-cal, rms=0.126871Jy  sigma=0.112008
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.399 mas, bmaj=8.282 mas, bpa=-1.091 degrees
! Estimated noise=4.15558 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 69.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00722449 Jy
! Component: 100  -  total flux cleaned = 0.0110063 Jy
! Component: 150  -  total flux cleaned = 0.0129493 Jy
! Component: 200  -  total flux cleaned = 0.0146045 Jy
! Total flux subtracted in 200 components = 0.0146045 Jy
! Clean residual min=-0.004139 max=0.004042 Jy/beam
! Clean residual mean=-0.000006 rms=0.000966 Jy/beam
! Combined flux in latest and established models = 0.177385 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 73 components and 0.177385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126512Jy  sigma=0.111464
! Fit after  self-cal, rms=0.126583Jy  sigma=0.111297
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126583Jy  sigma=0.111297
! Fit after  self-cal, rms=0.121384Jy  sigma=0.110483
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.401 mas, bmaj=8.18 mas, bpa=-1.463 degrees
! Estimated noise=4.14895 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00337968 Jy
! Component: 100  -  total flux cleaned = 0.00557677 Jy
! Component: 150  -  total flux cleaned = 0.00689126 Jy
! Component: 200  -  total flux cleaned = 0.00776177 Jy
! Total flux subtracted in 200 components = 0.00776177 Jy
! Clean residual min=-0.002771 max=0.002607 Jy/beam
! Clean residual mean=-0.000001 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.185147 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 110 components and 0.185147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.121273Jy  sigma=0.110345
! Fit after  self-cal, rms=0.121414Jy  sigma=0.110238
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000488145 Jy
! Component: 100  -  total flux cleaned = 0.0010427 Jy
! Component: 150  -  total flux cleaned = 0.0014379 Jy
! Component: 200  -  total flux cleaned = 0.00179197 Jy
! Total flux subtracted in 200 components = 0.00179197 Jy
! Clean residual min=-0.002915 max=0.002603 Jy/beam
! Clean residual mean=-0.000001 rms=0.000668 Jy/beam
! Combined flux in latest and established models = 0.186939 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 122 components and 0.186939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.121372Jy  sigma=0.110193
! Fit after  self-cal, rms=0.121384Jy  sigma=0.110190
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.121384Jy  sigma=0.110190
! Fit after  self-cal, rms=0.120888Jy  sigma=0.110142
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.4 mas, bmaj=8.157 mas, bpa=-1.595 degrees
! Estimated noise=4.14689 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00172762 Jy
! Component: 100  -  total flux cleaned = 0.00285797 Jy
! Component: 150  -  total flux cleaned = 0.00341316 Jy
! Component: 200  -  total flux cleaned = 0.00371678 Jy
! Total flux subtracted in 200 components = 0.00371678 Jy
! Clean residual min=-0.002635 max=0.002487 Jy/beam
! Clean residual mean=-0.000001 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.190655 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 135 components and 0.190655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120851Jy  sigma=0.110103
! Fit after  self-cal, rms=0.120921Jy  sigma=0.110094
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000396159 Jy
! Component: 100  -  total flux cleaned = 0.000684666 Jy
! Component: 150  -  total flux cleaned = 0.000912225 Jy
! Component: 200  -  total flux cleaned = 0.00100144 Jy
! Total flux subtracted in 200 components = 0.00100144 Jy
! Clean residual min=-0.002670 max=0.002502 Jy/beam
! Clean residual mean=-0.000001 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.191657 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 144 components and 0.191657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120903Jy  sigma=0.110076
! Fit after  self-cal, rms=0.120911Jy  sigma=0.110075
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120911Jy  sigma=0.110075
! Fit after  self-cal, rms=0.120822Jy  sigma=0.110066
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.964 mas, bmaj=15.38 mas, bpa=2.2 degrees
! Estimated noise=4.757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130014 Jy
! Component: 100  -  total flux cleaned = 0.00194663 Jy
! Component: 150  -  total flux cleaned = 0.00242744 Jy
! Component: 200  -  total flux cleaned = 0.00279332 Jy
! Total flux subtracted in 200 components = 0.00279332 Jy
! Clean residual min=-0.002641 max=0.002658 Jy/beam
! Clean residual mean=-0.000003 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.19445 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 169 components and 0.19445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120819Jy  sigma=0.110056
! Fit after  self-cal, rms=0.120838Jy  sigma=0.110052
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000385985 Jy
! Component: 100  -  total flux cleaned = 0.00069273 Jy
! Component: 150  -  total flux cleaned = 0.000793772 Jy
! Component: 200  -  total flux cleaned = 0.000868723 Jy
! Total flux subtracted in 200 components = 0.000868723 Jy
! Clean residual min=-0.002591 max=0.002645 Jy/beam
! Clean residual mean=-0.000003 rms=0.000772 Jy/beam
! Combined flux in latest and established models = 0.195319 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 174 components and 0.195319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120839Jy  sigma=0.110050
! Fit after  self-cal, rms=0.120838Jy  sigma=0.110049
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.4 mas, bmaj=8.15 mas, bpa=-1.632 degrees
! Estimated noise=4.14891 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.4 x 8.15 at -1.632 degrees (North through East)
! Clean map  min=-0.0024574  max=0.14123 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.638 mas, bmaj=6.484 mas, bpa=-1.496 degrees
! Estimated noise=8.79902 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113511 Jy
! Component: 100  -  total flux cleaned = 0.138678 Jy
! Component: 150  -  total flux cleaned = 0.14864 Jy
! Component: 200  -  total flux cleaned = 0.155654 Jy
! Total flux subtracted in 200 components = 0.155654 Jy
! Clean residual min=-0.004473 max=0.005038 Jy/beam
! Clean residual mean=-0.000005 rms=0.001234 Jy/beam
! Combined flux in latest and established models = 0.155654 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.155654 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.4 mas, bmaj=8.15 mas, bpa=-1.632 degrees
! Estimated noise=4.14891 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00843645 Jy
! Component: 100  -  total flux cleaned = 0.0144206 Jy
! Component: 150  -  total flux cleaned = 0.0190794 Jy
! Component: 200  -  total flux cleaned = 0.0228506 Jy
! Total flux subtracted in 200 components = 0.0228506 Jy
! Clean residual min=-0.003691 max=0.003160 Jy/beam
! Clean residual mean=-0.000006 rms=0.000810 Jy/beam
! Combined flux in latest and established models = 0.178504 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 67 components and 0.178504 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.964 mas, bmaj=15.38 mas, bpa=2.2 degrees
! Estimated noise=4.757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0047579 Jy
! Component: 100  -  total flux cleaned = 0.00797596 Jy
! Component: 150  -  total flux cleaned = 0.0103159 Jy
! Component: 200  -  total flux cleaned = 0.0120548 Jy
! Total flux subtracted in 200 components = 0.0120548 Jy
! Clean residual min=-0.002782 max=0.002572 Jy/beam
! Clean residual mean=-0.000006 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.190559 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013336 Jy
! Component: 100  -  total flux cleaned = 0.00237758 Jy
! Component: 150  -  total flux cleaned = 0.0032011 Jy
! Component: 200  -  total flux cleaned = 0.00380922 Jy
! Total flux subtracted in 200 components = 0.00380922 Jy
! Clean residual min=-0.002632 max=0.002625 Jy/beam
! Clean residual mean=-0.000004 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.194368 Jy
! Adding 85 model components to the UV plane model.
! The established model now contains 145 components and 0.194368 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.4 mas, bmaj=8.15 mas, bpa=-1.632 degrees
! Estimated noise=4.14891 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000253917 Jy
! Component: 100  -  total flux cleaned = -0.000203337 Jy
! Component: 150  -  total flux cleaned = -0.000106716 Jy
! Component: 200  -  total flux cleaned = 2.6553e-05 Jy
! Total flux subtracted in 200 components = 2.6553e-05 Jy
! Clean residual min=-0.002857 max=0.002406 Jy/beam
! Clean residual mean=-0.000002 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.194395 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 163 components and 0.194395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120861Jy  sigma=0.110076
! Fit after  self-cal, rms=0.120840Jy  sigma=0.110068
wmodel /scr/pima/rdv93_uvs/J1332-1402_S_map.mod
! Writing 163 model components to file: /scr/pima/rdv93_uvs/J1332-1402_S_map.mod
wobs /scr/pima/rdv93_uvs/J1332-1402_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv93_uvs/J1332-1402_S_uvs.fits
wwins /scr/pima/rdv93_uvs/J1332-1402_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rdv93_uvs/J1332-1402_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000532867 Jy
! Component: 100  -  total flux cleaned = -0.000811736 Jy
! Component: 150  -  total flux cleaned = -0.000999198 Jy
! Component: 200  -  total flux cleaned = -0.000892219 Jy
! Component: 250  -  total flux cleaned = -0.000995355 Jy
! Component: 300  -  total flux cleaned = -0.00106147 Jy
! Component: 350  -  total flux cleaned = -0.00112651 Jy
! Component: 400  -  total flux cleaned = -0.00109455 Jy
! Component: 450  -  total flux cleaned = -0.00115575 Jy
! Component: 500  -  total flux cleaned = -0.00109535 Jy
! Component: 550  -  total flux cleaned = -0.00109536 Jy
! Component: 600  -  total flux cleaned = -0.00106725 Jy
! Component: 650  -  total flux cleaned = -0.00117951 Jy
! Component: 700  -  total flux cleaned = -0.00112395 Jy
! Component: 750  -  total flux cleaned = -0.00115089 Jy
! Component: 800  -  total flux cleaned = -0.00120402 Jy
! Component: 850  -  total flux cleaned = -0.00123001 Jy
! Component: 900  -  total flux cleaned = -0.00122968 Jy
! Component: 950  -  total flux cleaned = -0.00120376 Jy
! Component: 1000  -  total flux cleaned = -0.00120368 Jy
! Component: 1050  -  total flux cleaned = -0.00110564 Jy
! Component: 1100  -  total flux cleaned = -0.00110562 Jy
! Component: 1150  -  total flux cleaned = -0.000986501 Jy
! Component: 1200  -  total flux cleaned = -0.00105787 Jy
! Component: 1250  -  total flux cleaned = -0.00105832 Jy
! Component: 1300  -  total flux cleaned = -0.0010816 Jy
! Component: 1350  -  total flux cleaned = -0.00114975 Jy
! Component: 1400  -  total flux cleaned = -0.00110426 Jy
! Component: 1450  -  total flux cleaned = -0.00114832 Jy
! Component: 1500  -  total flux cleaned = -0.0010825 Jy
! Component: 1550  -  total flux cleaned = -0.00112547 Jy
! Component: 1600  -  total flux cleaned = -0.00116834 Jy
! Component: 1650  -  total flux cleaned = -0.00116824 Jy
! Component: 1700  -  total flux cleaned = -0.00106349 Jy
! Component: 1750  -  total flux cleaned = -0.00106369 Jy
! Component: 1800  -  total flux cleaned = -0.00108431 Jy
! Component: 1850  -  total flux cleaned = -0.0010436 Jy
! Component: 1900  -  total flux cleaned = -0.00104392 Jy
! Component: 1950  -  total flux cleaned = -0.000924669 Jy
! Component: 2000  -  total flux cleaned = -0.000944769 Jy
! Component: 2050  -  total flux cleaned = -0.000925379 Jy
! Component: 2100  -  total flux cleaned = -0.000906282 Jy
! Component: 2150  -  total flux cleaned = -0.000906218 Jy
! Component: 2200  -  total flux cleaned = -0.000868327 Jy
! Component: 2250  -  total flux cleaned = -0.000792712 Jy
! Component: 2300  -  total flux cleaned = -0.000774079 Jy
! Component: 2350  -  total flux cleaned = -0.000700223 Jy
! Component: 2400  -  total flux cleaned = -0.000663712 Jy
! Component: 2450  -  total flux cleaned = -0.000645642 Jy
! Component: 2500  -  total flux cleaned = -0.000627645 Jy
! Component: 2550  -  total flux cleaned = -0.000627756 Jy
! Component: 2600  -  total flux cleaned = -0.000538795 Jy
! Component: 2650  -  total flux cleaned = -0.000503566 Jy
! Component: 2700  -  total flux cleaned = -0.000521012 Jy
! Component: 2750  -  total flux cleaned = -0.000434181 Jy
! Component: 2800  -  total flux cleaned = -0.000434297 Jy
! Component: 2850  -  total flux cleaned = -0.000365925 Jy
! Component: 2900  -  total flux cleaned = -0.000315108 Jy
! Component: 2950  -  total flux cleaned = -0.00033183 Jy
! Component: 3000  -  total flux cleaned = -0.000315062 Jy
! Component: 3050  -  total flux cleaned = -0.000248639 Jy
! Component: 3100  -  total flux cleaned = -0.000265248 Jy
! Component: 3150  -  total flux cleaned = -0.000249028 Jy
! Component: 3200  -  total flux cleaned = -0.00021656 Jy
! Component: 3250  -  total flux cleaned = -0.000264938 Jy
! Component: 3300  -  total flux cleaned = -0.000232896 Jy
! Component: 3350  -  total flux cleaned = -0.000232956 Jy
! Component: 3400  -  total flux cleaned = -0.000185523 Jy
! Component: 3450  -  total flux cleaned = -0.0001541 Jy
! Component: 3500  -  total flux cleaned = -0.000185305 Jy
! Component: 3550  -  total flux cleaned = -0.000138702 Jy
! Component: 3600  -  total flux cleaned = -0.000107779 Jy
! Component: 3650  -  total flux cleaned = -0.000138436 Jy
! Component: 3700  -  total flux cleaned = -6.21174e-05 Jy
! Component: 3750  -  total flux cleaned = -0.000122906 Jy
! Component: 3800  -  total flux cleaned = -9.2758e-05 Jy
! Component: 3850  -  total flux cleaned = -0.000122726 Jy
! Component: 3900  -  total flux cleaned = -0.000122761 Jy
! Component: 3950  -  total flux cleaned = -0.000181977 Jy
! Component: 4000  -  total flux cleaned = -0.000152537 Jy
! Component: 4050  -  total flux cleaned = -0.00016727 Jy
! Total flux subtracted in 4096 components = -0.000181798 Jy
! Clean residual min=-0.000796 max=0.001018 Jy/beam
! Clean residual mean=-0.000002 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.194213 Jy
keep
! Adding 297 model components to the UV plane model.
! The established model now contains 460 components and 0.194213 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rdv93_uvs/J1332-1402_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.4 x 8.15 at -1.632 degrees (North through East)
! Clean map  min=-0.0018125  max=0.14037 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv93_uvs/J1332-1402_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.140369 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00026107 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.557965 0.557965 1.11593 2.23186 4.46372 8.92744 17.8549 35.7098 71.4195
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.14 
quit
! Quitting program
! Log file /scr/pima/rdv93_uvs/J1332-1402_S_uvs.log closed on Tue Sep 24 17:07:38 2013