! Started logfile: /scr/pima/rdv93_uvs/J1300+141B_X_uvs.log on Tue Sep 24 17:07:49 2013
obs /scr/pima/rdv93_uvs/J1300+141B_X_uva.fits
! Reading UV FITS file: /scr/pima/rdv93_uvs/J1300+141B_X_uva.fits
! AN table 1: 180 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.894815 visibilities/baseline/integration-bin.
! Found source: J1300+141B
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40993e+09      1.6e+07          1      1.6e+07
!  02        2  8.47993e+09      1.6e+07          1      1.6e+07
!  03        3  8.79493e+09      1.6e+07          1      1.6e+07
!  04        4  8.89993e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 28992 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv93_uvs/J1300+141B_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011453Jy  sigma=1.180279
! Fit after  self-cal, rms=0.842441Jy  sigma=0.983496
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7076 mas, bmaj=1.671 mas, bpa=0.341 degrees
! Estimated noise=7.73059 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126386 Jy
! Component: 100  -  total flux cleaned = 0.153947 Jy
! Total flux subtracted in 100 components = 0.153947 Jy
! Clean residual min=-0.004316 max=0.007693 Jy/beam
! Clean residual mean=-0.000002 rms=0.001052 Jy/beam
! Combined flux in latest and established models = 0.153947 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.153947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104757Jy  sigma=0.118511
! Fit after  self-cal, rms=0.104748Jy  sigma=0.118507
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00704435 Jy
! Component: 100  -  total flux cleaned = 0.0104318 Jy
! Total flux subtracted in 100 components = 0.0104318 Jy
! Clean residual min=-0.004003 max=0.004307 Jy/beam
! Clean residual mean=-0.000001 rms=0.000938 Jy/beam
! Combined flux in latest and established models = 0.164379 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.164379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104193Jy  sigma=0.117691
! Fit after  self-cal, rms=0.104211Jy  sigma=0.117688
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8753 mas, bmaj=1.954 mas, bpa=-0.0164 degrees
! Estimated noise=3.5888 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0030915 Jy
! Component: 100  -  total flux cleaned = 0.00450474 Jy
! Component: 150  -  total flux cleaned = 0.00538173 Jy
! Component: 200  -  total flux cleaned = 0.00589094 Jy
! Total flux subtracted in 200 components = 0.00589094 Jy
! Clean residual min=-0.002524 max=0.002201 Jy/beam
! Clean residual mean=-0.000002 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.17027 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 24 components and 0.17027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104142Jy  sigma=0.117565
! Fit after  self-cal, rms=0.104152Jy  sigma=0.117563
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.97     KP        1.02     
!   LA        1.01     MK        1.01     NL        0.96     OV        1.03     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        0.95     
!   LA        0.97     MK        1.03     NL        0.95     OV        0.97     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.00     KP        0.85     
!   LA        1.03     MK        1.00     NL        1.01     OV        1.05     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.03     KP        0.90     
!   LA        1.00     MK        1.02     NL        1.04     OV        1.01     
!   PT        1.02     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.104152Jy  sigma=0.117563
! Fit after  self-cal, rms=0.104264Jy  sigma=0.117170
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8777 mas, bmaj=1.957 mas, bpa=0.161 degrees
! Estimated noise=3.58165 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000533555 Jy
! Component: 100  -  total flux cleaned = -0.000645583 Jy
! Component: 150  -  total flux cleaned = -0.000692924 Jy
! Component: 200  -  total flux cleaned = -0.000721925 Jy
! Total flux subtracted in 200 components = -0.000721925 Jy
! Clean residual min=-0.001985 max=0.001915 Jy/beam
! Clean residual mean=-0.000002 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.169548 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 30 components and 0.169548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104257Jy  sigma=0.117163
! Fit after  self-cal, rms=0.104292Jy  sigma=0.117153
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104292Jy  sigma=0.117153
! Fit after  self-cal, rms=0.104408Jy  sigma=0.117057
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8768 mas, bmaj=1.955 mas, bpa=0.03371 degrees
! Estimated noise=3.57785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000445192 Jy
! Component: 100  -  total flux cleaned = -0.000534257 Jy
! Component: 150  -  total flux cleaned = -0.000596892 Jy
! Component: 200  -  total flux cleaned = -0.000642044 Jy
! Total flux subtracted in 200 components = -0.000642044 Jy
! Clean residual min=-0.001702 max=0.001763 Jy/beam
! Clean residual mean=-0.000000 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.168906 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 35 components and 0.168906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104404Jy  sigma=0.117054
! Fit after  self-cal, rms=0.104413Jy  sigma=0.117051
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.6, 25.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000443101 Jy
! Component: 100  -  total flux cleaned = 0.000265751 Jy
! Component: 150  -  total flux cleaned = 5.42376e-05 Jy
! Component: 200  -  total flux cleaned = -6.09033e-05 Jy
! Total flux subtracted in 200 components = -6.09033e-05 Jy
! Clean residual min=-0.001643 max=0.001384 Jy/beam
! Clean residual mean=-0.000000 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.168845 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 54 components and 0.168845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104373Jy  sigma=0.117008
! Fit after  self-cal, rms=0.104370Jy  sigma=0.117006
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104370Jy  sigma=0.117006
! Fit after  self-cal, rms=0.104370Jy  sigma=0.117004
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8771 mas, bmaj=1.955 mas, bpa=0.0538 degrees
! Estimated noise=3.57476 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000184947 Jy
! Component: 100  -  total flux cleaned = 8.79981e-05 Jy
! Component: 150  -  total flux cleaned = -2.04245e-05 Jy
! Component: 200  -  total flux cleaned = -9.80152e-05 Jy
! Total flux subtracted in 200 components = -9.80152e-05 Jy
! Clean residual min=-0.001598 max=0.001403 Jy/beam
! Clean residual mean=-0.000000 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.168747 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 61 components and 0.168747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104360Jy  sigma=0.116994
! Fit after  self-cal, rms=0.104362Jy  sigma=0.116994
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.3344e-05 Jy
! Component: 100  -  total flux cleaned = -0.000140093 Jy
! Component: 150  -  total flux cleaned = -0.000204995 Jy
! Component: 200  -  total flux cleaned = -0.000265161 Jy
! Total flux subtracted in 200 components = -0.000265161 Jy
! Clean residual min=-0.001592 max=0.001403 Jy/beam
! Clean residual mean=-0.000000 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.168482 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 66 components and 0.168482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104357Jy  sigma=0.116989
! Fit after  self-cal, rms=0.104356Jy  sigma=0.116989
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104356Jy  sigma=0.116989
! Fit after  self-cal, rms=0.104392Jy  sigma=0.116989
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.033 mas, bmaj=2.981 mas, bpa=-4.62 degrees
! Estimated noise=4.39214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.69266e-05 Jy
! Component: 100  -  total flux cleaned = 0.000139848 Jy
! Component: 150  -  total flux cleaned = 0.000125868 Jy
! Component: 200  -  total flux cleaned = 0.000114505 Jy
! Total flux subtracted in 200 components = 0.000114505 Jy
! Clean residual min=-0.001713 max=0.001593 Jy/beam
! Clean residual mean=-0.000000 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.168596 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 74 components and 0.168596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104393Jy  sigma=0.116988
! Fit after  self-cal, rms=0.104393Jy  sigma=0.116987
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.33193e-05 Jy
! Component: 100  -  total flux cleaned = 4.43698e-05 Jy
! Component: 150  -  total flux cleaned = 1.71311e-05 Jy
! Component: 200  -  total flux cleaned = -7.50637e-06 Jy
! Total flux subtracted in 200 components = -7.50637e-06 Jy
! Clean residual min=-0.001711 max=0.001565 Jy/beam
! Clean residual mean=-0.000000 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.168589 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 78 components and 0.168589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104393Jy  sigma=0.116988
! Fit after  self-cal, rms=0.104392Jy  sigma=0.116987
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8773 mas, bmaj=1.955 mas, bpa=0.07582 degrees
! Estimated noise=3.57426 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8773 x 1.955 at 0.07582 degrees (North through East)
! Clean map  min=-0.0014379  max=0.16317 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.708 mas, bmaj=1.67 mas, bpa=0.4226 degrees
! Estimated noise=7.72979 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126345 Jy
! Component: 100  -  total flux cleaned = 0.153898 Jy
! Component: 150  -  total flux cleaned = 0.161018 Jy
! Component: 200  -  total flux cleaned = 0.162552 Jy
! Total flux subtracted in 200 components = 0.162552 Jy
! Clean residual min=-0.003731 max=0.003911 Jy/beam
! Clean residual mean=-0.000001 rms=0.000854 Jy/beam
! Combined flux in latest and established models = 0.162552 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.162552 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8773 mas, bmaj=1.955 mas, bpa=0.07582 degrees
! Estimated noise=3.57426 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0031727 Jy
! Component: 100  -  total flux cleaned = 0.00420208 Jy
! Component: 150  -  total flux cleaned = 0.004721 Jy
! Component: 200  -  total flux cleaned = 0.00496735 Jy
! Total flux subtracted in 200 components = 0.00496735 Jy
! Clean residual min=-0.001688 max=0.001410 Jy/beam
! Clean residual mean=-0.000000 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.167519 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 33 components and 0.167519 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.033 mas, bmaj=2.981 mas, bpa=-4.62 degrees
! Estimated noise=4.39214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110756 Jy
! Component: 100  -  total flux cleaned = 0.00103547 Jy
! Component: 150  -  total flux cleaned = 0.000956682 Jy
! Component: 200  -  total flux cleaned = 0.000904581 Jy
! Total flux subtracted in 200 components = 0.000904581 Jy
! Clean residual min=-0.001750 max=0.001556 Jy/beam
! Clean residual mean=-0.000000 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.168424 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.04164e-06 Jy
! Component: 100  -  total flux cleaned = -1.5202e-06 Jy
! Component: 150  -  total flux cleaned = 2.33352e-05 Jy
! Component: 200  -  total flux cleaned = 3.46046e-05 Jy
! Total flux subtracted in 200 components = 3.46046e-05 Jy
! Clean residual min=-0.001727 max=0.001571 Jy/beam
! Clean residual mean=-0.000000 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.168458 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 50 components and 0.168458 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8773 mas, bmaj=1.955 mas, bpa=0.07582 degrees
! Estimated noise=3.57426 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.85046e-05 Jy
! Component: 100  -  total flux cleaned = 7.79855e-05 Jy
! Component: 150  -  total flux cleaned = 3.14619e-06 Jy
! Component: 200  -  total flux cleaned = 2.66331e-05 Jy
! Total flux subtracted in 200 components = 2.66331e-05 Jy
! Clean residual min=-0.001594 max=0.001450 Jy/beam
! Clean residual mean=-0.000000 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.168485 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 59 components and 0.168485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104407Jy  sigma=0.117001
! Fit after  self-cal, rms=0.104406Jy  sigma=0.117001
wmodel /scr/pima/rdv93_uvs/J1300+141B_X_map.mod
! Writing 59 model components to file: /scr/pima/rdv93_uvs/J1300+141B_X_map.mod
wobs /scr/pima/rdv93_uvs/J1300+141B_X_uvs.fits
! Writing UV FITS file: /scr/pima/rdv93_uvs/J1300+141B_X_uvs.fits
wwins /scr/pima/rdv93_uvs/J1300+141B_X_map.win
! wwins: Wrote 2 windows to /scr/pima/rdv93_uvs/J1300+141B_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000615019 Jy
! Component: 100  -  total flux cleaned = -0.000937162 Jy
! Component: 150  -  total flux cleaned = -0.00113891 Jy
! Component: 200  -  total flux cleaned = -0.00128483 Jy
! Component: 250  -  total flux cleaned = -0.00142671 Jy
! Component: 300  -  total flux cleaned = -0.0014497 Jy
! Component: 350  -  total flux cleaned = -0.00151725 Jy
! Component: 400  -  total flux cleaned = -0.00153941 Jy
! Component: 450  -  total flux cleaned = -0.00158353 Jy
! Component: 500  -  total flux cleaned = -0.00164765 Jy
! Component: 550  -  total flux cleaned = -0.0016891 Jy
! Component: 600  -  total flux cleaned = -0.00175005 Jy
! Component: 650  -  total flux cleaned = -0.00174961 Jy
! Component: 700  -  total flux cleaned = -0.00176911 Jy
! Component: 750  -  total flux cleaned = -0.0016909 Jy
! Component: 800  -  total flux cleaned = -0.00171028 Jy
! Component: 850  -  total flux cleaned = -0.00167218 Jy
! Component: 900  -  total flux cleaned = -0.00163448 Jy
! Component: 950  -  total flux cleaned = -0.0016346 Jy
! Component: 1000  -  total flux cleaned = -0.00163464 Jy
! Component: 1050  -  total flux cleaned = -0.00161644 Jy
! Component: 1100  -  total flux cleaned = -0.00159831 Jy
! Component: 1150  -  total flux cleaned = -0.00156297 Jy
! Component: 1200  -  total flux cleaned = -0.00151074 Jy
! Component: 1250  -  total flux cleaned = -0.00151097 Jy
! Component: 1300  -  total flux cleaned = -0.00147657 Jy
! Component: 1350  -  total flux cleaned = -0.00147651 Jy
! Component: 1400  -  total flux cleaned = -0.00140962 Jy
! Component: 1450  -  total flux cleaned = -0.00135966 Jy
! Component: 1500  -  total flux cleaned = -0.00134321 Jy
! Component: 1550  -  total flux cleaned = -0.00127811 Jy
! Component: 1600  -  total flux cleaned = -0.00124594 Jy
! Component: 1650  -  total flux cleaned = -0.0012459 Jy
! Component: 1700  -  total flux cleaned = -0.00123004 Jy
! Component: 1750  -  total flux cleaned = -0.0011671 Jy
! Component: 1800  -  total flux cleaned = -0.00113595 Jy
! Component: 1850  -  total flux cleaned = -0.00112042 Jy
! Component: 1900  -  total flux cleaned = -0.00105925 Jy
! Component: 1950  -  total flux cleaned = -0.00101386 Jy
! Component: 2000  -  total flux cleaned = -0.0009837 Jy
! Component: 2050  -  total flux cleaned = -0.000924192 Jy
! Component: 2100  -  total flux cleaned = -0.000850338 Jy
! Component: 2150  -  total flux cleaned = -0.000909068 Jy
! Component: 2200  -  total flux cleaned = -0.000879974 Jy
! Component: 2250  -  total flux cleaned = -0.000807863 Jy
! Component: 2300  -  total flux cleaned = -0.00076513 Jy
! Component: 2350  -  total flux cleaned = -0.000779334 Jy
! Component: 2400  -  total flux cleaned = -0.000751252 Jy
! Component: 2450  -  total flux cleaned = -0.000695365 Jy
! Component: 2500  -  total flux cleaned = -0.000667604 Jy
! Component: 2550  -  total flux cleaned = -0.000653716 Jy
! Component: 2600  -  total flux cleaned = -0.000585304 Jy
! Component: 2650  -  total flux cleaned = -0.000571549 Jy
! Component: 2700  -  total flux cleaned = -0.000544561 Jy
! Component: 2750  -  total flux cleaned = -0.00055802 Jy
! Component: 2800  -  total flux cleaned = -0.00047799 Jy
! Component: 2850  -  total flux cleaned = -0.000451516 Jy
! Component: 2900  -  total flux cleaned = -0.000372632 Jy
! Component: 2950  -  total flux cleaned = -0.000385607 Jy
! Component: 3000  -  total flux cleaned = -0.000346632 Jy
! Component: 3050  -  total flux cleaned = -0.000320773 Jy
! Component: 3100  -  total flux cleaned = -0.000269461 Jy
! Component: 3150  -  total flux cleaned = -0.000243926 Jy
! Component: 3200  -  total flux cleaned = -0.000167794 Jy
! Component: 3250  -  total flux cleaned = -0.000142693 Jy
! Component: 3300  -  total flux cleaned = -9.26064e-05 Jy
! Component: 3350  -  total flux cleaned = -6.77186e-05 Jy
! Component: 3400  -  total flux cleaned = -5.52497e-05 Jy
! Component: 3450  -  total flux cleaned = -1.84195e-05 Jy
! Component: 3500  -  total flux cleaned = 7.95432e-05 Jy
! Component: 3550  -  total flux cleaned = 5.50247e-05 Jy
! Component: 3600  -  total flux cleaned = 5.5085e-05 Jy
! Component: 3650  -  total flux cleaned = 0.000151494 Jy
! Component: 3700  -  total flux cleaned = 0.000151443 Jy
! Component: 3750  -  total flux cleaned = 0.0001872 Jy
! Component: 3800  -  total flux cleaned = 0.00023457 Jy
! Component: 3850  -  total flux cleaned = 0.000258024 Jy
! Component: 3900  -  total flux cleaned = 0.000281557 Jy
! Component: 3950  -  total flux cleaned = 0.000281451 Jy
! Component: 4000  -  total flux cleaned = 0.000316223 Jy
! Component: 4050  -  total flux cleaned = 0.000327698 Jy
! Total flux subtracted in 4096 components = 0.000350643 Jy
! Clean residual min=-0.000620 max=0.000803 Jy/beam
! Clean residual mean=0.000001 rms=0.000198 Jy/beam
! Combined flux in latest and established models = 0.168836 Jy
keep
! Adding 302 model components to the UV plane model.
! The established model now contains 361 components and 0.168836 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rdv93_uvs/J1300+141B_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8773 x 1.955 at 0.07582 degrees (North through East)
! Clean map  min=-0.0012992  max=0.16313 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv93_uvs/J1300+141B_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.163127 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000196944 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.362192 0.362192 0.724384 1.44877 2.89753 5.79507 11.5901 23.1803 46.3605 92.7211
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.163 
quit
! Quitting program
! Log file /scr/pima/rdv93_uvs/J1300+141B_X_uvs.log closed on Tue Sep 24 17:07:54 2013