! Started logfile: /scr/pima/rdv93_uvs/J0948-2901_X_uvs.log on Tue Sep 24 17:07:06 2013 obs /scr/pima/rdv93_uvs/J0948-2901_X_uva.fits ! Reading UV FITS file: /scr/pima/rdv93_uvs/J0948-2901_X_uva.fits ! AN table 1: 180 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.512963 visibilities/baseline/integration-bin. ! Found source: J0948-2901 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 1.6e+07 1 1.6e+07 ! 02 2 8.47993e+09 1.6e+07 1 1.6e+07 ! 03 3 8.79493e+09 1.6e+07 1 1.6e+07 ! 04 4 8.89993e+09 1.6e+07 1 1.6e+07 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 13296 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/rdv93_uvs/J0948-2901_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 272 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 272 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 272 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 272 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.007940Jy sigma=0.311778 ! Fit after self-cal, rms=0.927114Jy sigma=0.288100 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9313 mas, bmaj=2.098 mas, bpa=12.81 degrees ! Estimated noise=49.9613 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0612018 Jy ! Component: 100 - total flux cleaned = 0.0761482 Jy ! Total flux subtracted in 100 components = 0.0761482 Jy ! Clean residual min=-0.008091 max=0.008634 Jy/beam ! Clean residual mean=-0.000050 rms=0.002117 Jy/beam ! Combined flux in latest and established models = 0.0761482 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0761482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105473Jy sigma=0.031414 ! Fit after self-cal, rms=0.104047Jy sigma=0.030994 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.337 mas, bmaj=3.107 mas, bpa=12.17 degrees ! Estimated noise=20.9807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00862183 Jy ! Component: 100 - total flux cleaned = 0.0121082 Jy ! Component: 150 - total flux cleaned = 0.013039 Jy ! Component: 200 - total flux cleaned = 0.0130913 Jy ! Total flux subtracted in 200 components = 0.0130913 Jy ! Clean residual min=-0.006055 max=0.007420 Jy/beam ! Clean residual mean=-0.000045 rms=0.001707 Jy/beam ! Combined flux in latest and established models = 0.0892395 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 13 components and 0.0892395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103570Jy sigma=0.030738 ! Fit after self-cal, rms=0.103671Jy sigma=0.030724 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 HN 1.00* LA 1.06 ! MK 0.99 NL 0.98 OV 1.04 PT 1.01 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 1.00* LA 1.04 ! MK 0.96 NL 1.02 OV 1.06 PT 1.02 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.93 HN 1.00* LA 1.17 ! MK 0.97 NL 1.05 OV 1.02 PT 0.95 ! SC 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.89 HN 1.00* LA 1.13 ! MK 0.82 NL 0.95 OV 1.04 PT 0.90 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.103671Jy sigma=0.030724 ! Fit after self-cal, rms=0.100690Jy sigma=0.030602 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.327 mas, bmaj=3.043 mas, bpa=12.09 degrees ! Estimated noise=20.4874 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.4, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0065419 Jy ! Component: 100 - total flux cleaned = 0.00690738 Jy ! Component: 150 - total flux cleaned = 0.00701613 Jy ! Component: 200 - total flux cleaned = 0.00701861 Jy ! Total flux subtracted in 200 components = 0.00701861 Jy ! Clean residual min=-0.004056 max=0.005833 Jy/beam ! Clean residual mean=-0.000025 rms=0.001141 Jy/beam ! Combined flux in latest and established models = 0.0962581 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.0962581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100207Jy sigma=0.030456 ! Fit after self-cal, rms=0.100605Jy sigma=0.030367 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100605Jy sigma=0.030367 ! Fit after self-cal, rms=0.101681Jy sigma=0.030315 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.321 mas, bmaj=3.018 mas, bpa=12.04 degrees ! Estimated noise=20.4796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425816 Jy ! Component: 100 - total flux cleaned = 0.00433742 Jy ! Component: 150 - total flux cleaned = 0.00426029 Jy ! Component: 200 - total flux cleaned = 0.00412681 Jy ! Total flux subtracted in 200 components = 0.00412681 Jy ! Clean residual min=-0.003475 max=0.004431 Jy/beam ! Clean residual mean=-0.000013 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.100385 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 38 components and 0.100385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101445Jy sigma=0.030245 ! Fit after self-cal, rms=0.101825Jy sigma=0.030209 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219358 Jy ! Component: 100 - total flux cleaned = 0.00183561 Jy ! Component: 150 - total flux cleaned = 0.00159058 Jy ! Component: 200 - total flux cleaned = 0.00143047 Jy ! Total flux subtracted in 200 components = 0.00143047 Jy ! Clean residual min=-0.003612 max=0.003652 Jy/beam ! Clean residual mean=-0.000011 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.101815 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 48 components and 0.101815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101693Jy sigma=0.030177 ! Fit after self-cal, rms=0.101853Jy sigma=0.030168 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101853Jy sigma=0.030168 ! Fit after self-cal, rms=0.102528Jy sigma=0.030138 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.313 mas, bmaj=3.004 mas, bpa=12.06 degrees ! Estimated noise=20.3325 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175663 Jy ! Component: 100 - total flux cleaned = 0.00159096 Jy ! Component: 150 - total flux cleaned = 0.00145003 Jy ! Component: 200 - total flux cleaned = 0.00148864 Jy ! Total flux subtracted in 200 components = 0.00148864 Jy ! Clean residual min=-0.003194 max=0.003117 Jy/beam ! Clean residual mean=-0.000007 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.103304 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 57 components and 0.103304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102440Jy sigma=0.030117 ! Fit after self-cal, rms=0.102701Jy sigma=0.030099 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000943237 Jy ! Component: 100 - total flux cleaned = 0.000890346 Jy ! Component: 150 - total flux cleaned = 0.00080711 Jy ! Component: 200 - total flux cleaned = 0.000770309 Jy ! Total flux subtracted in 200 components = 0.000770309 Jy ! Clean residual min=-0.003252 max=0.002625 Jy/beam ! Clean residual mean=-0.000004 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.104074 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 61 components and 0.104074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102648Jy sigma=0.030087 ! Fit after self-cal, rms=0.102754Jy sigma=0.030083 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102754Jy sigma=0.030083 ! Fit after self-cal, rms=0.103146Jy sigma=0.030079 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=7.199 mas, bpa=7.309 degrees ! Estimated noise=21.2279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000723973 Jy ! Component: 100 - total flux cleaned = 0.000793383 Jy ! Component: 150 - total flux cleaned = 0.000823776 Jy ! Component: 200 - total flux cleaned = 0.000878187 Jy ! Total flux subtracted in 200 components = 0.000878187 Jy ! Clean residual min=-0.002867 max=0.002692 Jy/beam ! Clean residual mean=-0.000005 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.104953 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 0.104952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103122Jy sigma=0.030072 ! Fit after self-cal, rms=0.103259Jy sigma=0.030069 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125913 Jy ! Component: 100 - total flux cleaned = 9.65091e-05 Jy ! Component: 150 - total flux cleaned = 0.000121323 Jy ! Component: 200 - total flux cleaned = 0.000165235 Jy ! Total flux subtracted in 200 components = 0.000165235 Jy ! Clean residual min=-0.002962 max=0.002645 Jy/beam ! Clean residual mean=-0.000004 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.105118 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 80 components and 0.105118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103245Jy sigma=0.030067 ! Fit after self-cal, rms=0.103261Jy sigma=0.030064 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.306 mas, bmaj=2.997 mas, bpa=12.16 degrees ! Estimated noise=20.2431 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.306 x 2.997 at 12.16 degrees (North through East) ! Clean map min=-0.0042901 max=0.067688 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9235 mas, bmaj=2.077 mas, bpa=12.74 degrees ! Estimated noise=46.5667 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0563279 Jy ! Component: 100 - total flux cleaned = 0.074065 Jy ! Component: 150 - total flux cleaned = 0.0847024 Jy ! Component: 200 - total flux cleaned = 0.0900529 Jy ! Total flux subtracted in 200 components = 0.0900529 Jy ! Clean residual min=-0.006755 max=0.006372 Jy/beam ! Clean residual mean=-0.000021 rms=0.001522 Jy/beam ! Combined flux in latest and established models = 0.090053 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.090053 Jy ! Inverting map and beam ! Estimated beam: bmin=1.306 mas, bmaj=2.997 mas, bpa=12.16 degrees ! Estimated noise=20.2431 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00783306 Jy ! Component: 100 - total flux cleaned = 0.0122632 Jy ! Component: 150 - total flux cleaned = 0.0141165 Jy ! Component: 200 - total flux cleaned = 0.014116 Jy ! Total flux subtracted in 200 components = 0.014116 Jy ! Clean residual min=-0.003679 max=0.002887 Jy/beam ! Clean residual mean=-0.000005 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.104169 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 38 components and 0.104169 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=7.199 mas, bpa=7.309 degrees ! Estimated noise=21.2279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000983046 Jy ! Component: 100 - total flux cleaned = 0.000943456 Jy ! Component: 150 - total flux cleaned = 0.000902283 Jy ! Component: 200 - total flux cleaned = 0.000903452 Jy ! Total flux subtracted in 200 components = 0.000903452 Jy ! Clean residual min=-0.002963 max=0.002973 Jy/beam ! Clean residual mean=-0.000002 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.105072 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.31418e-05 Jy ! Component: 100 - total flux cleaned = -9.12081e-05 Jy ! Component: 150 - total flux cleaned = -0.000146382 Jy ! Component: 200 - total flux cleaned = -0.000197049 Jy ! Total flux subtracted in 200 components = -0.000197049 Jy ! Clean residual min=-0.002711 max=0.002843 Jy/beam ! Clean residual mean=-0.000001 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.104875 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 65 components and 0.104875 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.306 mas, bmaj=2.997 mas, bpa=12.16 degrees ! Estimated noise=20.2431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00032926 Jy ! Component: 100 - total flux cleaned = 0.00029058 Jy ! Component: 150 - total flux cleaned = 0.000218852 Jy ! Component: 200 - total flux cleaned = 0.000121497 Jy ! Total flux subtracted in 200 components = 0.000121497 Jy ! Clean residual min=-0.002673 max=0.002506 Jy/beam ! Clean residual mean=0.000000 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.104997 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.104997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103197Jy sigma=0.030053 ! Fit after self-cal, rms=0.103378Jy sigma=0.030047 wmodel /scr/pima/rdv93_uvs/J0948-2901_X_map.mod ! Writing 76 model components to file: /scr/pima/rdv93_uvs/J0948-2901_X_map.mod wobs /scr/pima/rdv93_uvs/J0948-2901_X_uvs.fits ! Writing UV FITS file: /scr/pima/rdv93_uvs/J0948-2901_X_uvs.fits wwins /scr/pima/rdv93_uvs/J0948-2901_X_map.win ! wwins: Wrote 3 windows to /scr/pima/rdv93_uvs/J0948-2901_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000761761 Jy ! Component: 100 - total flux cleaned = -0.00133052 Jy ! Component: 150 - total flux cleaned = -0.00149233 Jy ! Component: 200 - total flux cleaned = -0.00145422 Jy ! Component: 250 - total flux cleaned = -0.00141846 Jy ! Component: 300 - total flux cleaned = -0.00141952 Jy ! Component: 350 - total flux cleaned = -0.00148472 Jy ! Component: 400 - total flux cleaned = -0.00151592 Jy ! Component: 450 - total flux cleaned = -0.00157644 Jy ! Component: 500 - total flux cleaned = -0.00177817 Jy ! Component: 550 - total flux cleaned = -0.00183263 Jy ! Component: 600 - total flux cleaned = -0.00191315 Jy ! Component: 650 - total flux cleaned = -0.00199155 Jy ! Component: 700 - total flux cleaned = -0.00209226 Jy ! Component: 750 - total flux cleaned = -0.00216591 Jy ! Component: 800 - total flux cleaned = -0.00223721 Jy ! Component: 850 - total flux cleaned = -0.00230665 Jy ! Component: 900 - total flux cleaned = -0.00232888 Jy ! Component: 950 - total flux cleaned = -0.00246256 Jy ! Component: 1000 - total flux cleaned = -0.00252751 Jy ! Component: 1050 - total flux cleaned = -0.00263396 Jy ! Component: 1100 - total flux cleaned = -0.00273769 Jy ! Component: 1150 - total flux cleaned = -0.00285946 Jy ! Component: 1200 - total flux cleaned = -0.0029589 Jy ! Component: 1250 - total flux cleaned = -0.00301731 Jy ! Component: 1300 - total flux cleaned = -0.00307468 Jy ! Component: 1350 - total flux cleaned = -0.00313102 Jy ! Component: 1400 - total flux cleaned = -0.00316804 Jy ! Component: 1450 - total flux cleaned = -0.00324034 Jy ! Component: 1500 - total flux cleaned = -0.00331091 Jy ! Component: 1550 - total flux cleaned = -0.00336253 Jy ! Component: 1600 - total flux cleaned = -0.00341364 Jy ! Component: 1650 - total flux cleaned = -0.00346399 Jy ! Component: 1700 - total flux cleaned = -0.00353 Jy ! Component: 1750 - total flux cleaned = -0.00359489 Jy ! Component: 1800 - total flux cleaned = -0.0036741 Jy ! Component: 1850 - total flux cleaned = -0.00373643 Jy ! Component: 1900 - total flux cleaned = -0.00382877 Jy ! Component: 1950 - total flux cleaned = -0.00394996 Jy ! Component: 2000 - total flux cleaned = -0.00402455 Jy ! Component: 2050 - total flux cleaned = -0.0040983 Jy ! Component: 2100 - total flux cleaned = -0.00419984 Jy ! Component: 2150 - total flux cleaned = -0.00425691 Jy ! Component: 2200 - total flux cleaned = -0.00432754 Jy ! Component: 2250 - total flux cleaned = -0.00439714 Jy ! Component: 2300 - total flux cleaned = -0.00445207 Jy ! Component: 2350 - total flux cleaned = -0.00453317 Jy ! Component: 2400 - total flux cleaned = -0.00454651 Jy ! Component: 2450 - total flux cleaned = -0.00465185 Jy ! Component: 2500 - total flux cleaned = -0.00471661 Jy ! Component: 2550 - total flux cleaned = -0.00483201 Jy ! Component: 2600 - total flux cleaned = -0.00493348 Jy ! Component: 2650 - total flux cleaned = -0.0050212 Jy ! Component: 2700 - total flux cleaned = -0.00509554 Jy ! Component: 2750 - total flux cleaned = -0.00515688 Jy ! Component: 2800 - total flux cleaned = -0.00525422 Jy ! Component: 2850 - total flux cleaned = -0.00535062 Jy ! Component: 2900 - total flux cleaned = -0.00544607 Jy ! Component: 2950 - total flux cleaned = -0.0055171 Jy ! Component: 3000 - total flux cleaned = -0.00557584 Jy ! Component: 3050 - total flux cleaned = -0.00566883 Jy ! Component: 3100 - total flux cleaned = -0.00573789 Jy ! Component: 3150 - total flux cleaned = -0.00578374 Jy ! Component: 3200 - total flux cleaned = -0.00585184 Jy ! Component: 3250 - total flux cleaned = -0.00588567 Jy ! Component: 3300 - total flux cleaned = -0.00591925 Jy ! Component: 3350 - total flux cleaned = -0.0059526 Jy ! Component: 3400 - total flux cleaned = -0.00598579 Jy ! Component: 3450 - total flux cleaned = -0.00604065 Jy ! Component: 3500 - total flux cleaned = -0.00607326 Jy ! Component: 3550 - total flux cleaned = -0.00612723 Jy ! Component: 3600 - total flux cleaned = -0.00618077 Jy ! Component: 3650 - total flux cleaned = -0.00620204 Jy ! Component: 3700 - total flux cleaned = -0.00622327 Jy ! Component: 3750 - total flux cleaned = -0.0062549 Jy ! Component: 3800 - total flux cleaned = -0.00631758 Jy ! Component: 3850 - total flux cleaned = -0.00635898 Jy ! Component: 3900 - total flux cleaned = -0.00637957 Jy ! Component: 3950 - total flux cleaned = -0.00640008 Jy ! Component: 4000 - total flux cleaned = -0.00644092 Jy ! Component: 4050 - total flux cleaned = -0.00644084 Jy ! Total flux subtracted in 4096 components = -0.00645093 Jy ! Clean residual min=-0.000566 max=0.000536 Jy/beam ! Clean residual mean=-0.000000 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.0985459 Jy keep ! Adding 211 model components to the UV plane model. ! The established model now contains 287 components and 0.0985459 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/rdv93_uvs/J0948-2901_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.306 x 2.997 at 12.16 degrees (North through East) ! Clean map min=-0.0026261 max=0.065762 Jy/beam ! Writing clean map to FITS file: /scr/pima/rdv93_uvs/J0948-2901_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0657615 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000167348 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.763429 0.763429 1.52686 3.05372 6.10743 12.2149 24.4297 48.8594 97.7189 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.065 quit ! Quitting program ! Log file /scr/pima/rdv93_uvs/J0948-2901_X_uvs.log closed on Tue Sep 24 17:07:10 2013