! Started logfile: /scr/pima/rdv93_uvs/J0908+4150_S_uvs.log on Tue Sep 24 17:06:09 2013
obs /scr/pima/rdv93_uvs/J0908+4150_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv93_uvs/J0908+4150_S_uva.fits
! AN table 1: 180 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.840617 visibilities/baseline/integration-bin.
! Found source: J0908+4150
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09      1.6e+07          1      1.6e+07
!  02        2  2.26693e+09      1.6e+07          1      1.6e+07
!  03        3  2.35693e+09      1.6e+07          1      1.6e+07
!  04        4  2.37693e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 27236 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv93_uvs/J0908+4150_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 94 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008301Jy  sigma=0.427005
! Fit after  self-cal, rms=0.944291Jy  sigma=0.395558
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.36 mas, bmaj=5.653 mas, bpa=29.53 degrees
! Estimated noise=28.1737 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0490202 Jy
! Component: 100  -  total flux cleaned = 0.0618985 Jy
! Total flux subtracted in 100 components = 0.0618985 Jy
! Clean residual min=-0.007188 max=0.006761 Jy/beam
! Clean residual mean=0.000003 rms=0.001674 Jy/beam
! Combined flux in latest and established models = 0.0618986 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0618986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103009Jy  sigma=0.039867
! Fit after  self-cal, rms=0.101182Jy  sigma=0.039143
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.371 mas, bmaj=6.83 mas, bpa=27.35 degrees
! Estimated noise=10.7272 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00945714 Jy
! Component: 100  -  total flux cleaned = 0.0137653 Jy
! Component: 150  -  total flux cleaned = 0.0154736 Jy
! Component: 200  -  total flux cleaned = 0.0159663 Jy
! Total flux subtracted in 200 components = 0.0159663 Jy
! Clean residual min=-0.004493 max=0.006953 Jy/beam
! Clean residual mean=-0.000001 rms=0.001291 Jy/beam
! Combined flux in latest and established models = 0.0778648 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 29 components and 0.0778648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100737Jy  sigma=0.038571
! Fit after  self-cal, rms=0.100844Jy  sigma=0.038543
! Inverting map 
! Added new window around map position (-55.5, -60).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00688275 Jy
! Component: 100  -  total flux cleaned = 0.0109558 Jy
! Component: 150  -  total flux cleaned = 0.0138133 Jy
! Component: 200  -  total flux cleaned = 0.0159723 Jy
! Total flux subtracted in 200 components = 0.0159723 Jy
! Clean residual min=-0.003628 max=0.004463 Jy/beam
! Clean residual mean=-0.000008 rms=0.000968 Jy/beam
! Combined flux in latest and established models = 0.0938371 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 85 components and 0.0938371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100369Jy  sigma=0.038262
! Fit after  self-cal, rms=0.100462Jy  sigma=0.038202
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        0.90     KP        1.03     
!   LA        1.08     MK        0.89     NL        1.07     OV        0.95     
!   PT        1.02     SC        0.89     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.99     KP        1.09     
!   LA        0.96     MK        1.11     NL        1.08     OV        1.04     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.97     HN        0.92     KP        0.86     
!   LA        0.91     MK        1.12     NL        1.20     OV        1.01     
!   PT        1.14     SC        0.90     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.96     HN        0.92     KP        0.80     
!   LA        0.77     MK        1.16     NL        1.05     OV        0.87     
!   PT        1.03     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.100462Jy  sigma=0.038202
! Fit after  self-cal, rms=0.097928Jy  sigma=0.037931
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.335 mas, bmaj=6.874 mas, bpa=27.72 degrees
! Estimated noise=10.4595 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00211011 Jy
! Component: 100  -  total flux cleaned = 0.00309361 Jy
! Component: 150  -  total flux cleaned = 0.00382443 Jy
! Component: 200  -  total flux cleaned = 0.00414544 Jy
! Total flux subtracted in 200 components = 0.00414544 Jy
! Clean residual min=-0.002733 max=0.003572 Jy/beam
! Clean residual mean=-0.000012 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.0979825 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 120 components and 0.0979825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097764Jy  sigma=0.037876
! Fit after  self-cal, rms=0.097982Jy  sigma=0.037834
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097982Jy  sigma=0.037834
! Fit after  self-cal, rms=0.097571Jy  sigma=0.037760
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.438 mas, bmaj=6.827 mas, bpa=26.32 degrees
! Estimated noise=10.3707 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000378433 Jy
! Component: 100  -  total flux cleaned = 0.000931402 Jy
! Component: 150  -  total flux cleaned = 0.00133253 Jy
! Component: 200  -  total flux cleaned = 0.00167611 Jy
! Total flux subtracted in 200 components = 0.00167611 Jy
! Clean residual min=-0.002184 max=0.002741 Jy/beam
! Clean residual mean=-0.000010 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.0996586 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 136 components and 0.0996586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097495Jy  sigma=0.037746
! Fit after  self-cal, rms=0.097622Jy  sigma=0.037732
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (59, 60.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00185986 Jy
! Component: 100  -  total flux cleaned = 0.00203887 Jy
! Component: 150  -  total flux cleaned = 0.00212937 Jy
! Component: 200  -  total flux cleaned = 0.00221158 Jy
! Total flux subtracted in 200 components = 0.00221158 Jy
! Clean residual min=-0.002037 max=0.002199 Jy/beam
! Clean residual mean=-0.000011 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.10187 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 161 components and 0.10187 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097538Jy  sigma=0.037703
! Fit after  self-cal, rms=0.097573Jy  sigma=0.037690
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097573Jy  sigma=0.037690
! Fit after  self-cal, rms=0.097158Jy  sigma=0.037683
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.443 mas, bmaj=6.822 mas, bpa=26.22 degrees
! Estimated noise=10.2864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000345867 Jy
! Component: 100  -  total flux cleaned = 0.000518558 Jy
! Component: 150  -  total flux cleaned = 0.000516915 Jy
! Component: 200  -  total flux cleaned = 0.00051595 Jy
! Total flux subtracted in 200 components = 0.00051595 Jy
! Clean residual min=-0.001984 max=0.002120 Jy/beam
! Clean residual mean=-0.000009 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.102386 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 170 components and 0.102386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097108Jy  sigma=0.037672
! Fit after  self-cal, rms=0.097159Jy  sigma=0.037669
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000129853 Jy
! Component: 100  -  total flux cleaned = 0.000129277 Jy
! Component: 150  -  total flux cleaned = 0.000159555 Jy
! Component: 200  -  total flux cleaned = 0.000213982 Jy
! Total flux subtracted in 200 components = 0.000213982 Jy
! Clean residual min=-0.001974 max=0.002055 Jy/beam
! Clean residual mean=-0.000009 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.1026 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 177 components and 0.1026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097132Jy  sigma=0.037662
! Fit after  self-cal, rms=0.097142Jy  sigma=0.037661
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097142Jy  sigma=0.037661
! Fit after  self-cal, rms=0.096587Jy  sigma=0.037659
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.931 mas, bmaj=10.11 mas, bpa=23.17 degrees
! Estimated noise=10.9731 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000222521 Jy
! Component: 100  -  total flux cleaned = 0.000253615 Jy
! Component: 150  -  total flux cleaned = 0.000228076 Jy
! Component: 200  -  total flux cleaned = 0.000204228 Jy
! Total flux subtracted in 200 components = 0.000204228 Jy
! Clean residual min=-0.002337 max=0.002403 Jy/beam
! Clean residual mean=-0.000015 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.102804 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 202 components and 0.102804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096571Jy  sigma=0.037655
! Fit after  self-cal, rms=0.096601Jy  sigma=0.037653
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.38983e-05 Jy
! Component: 100  -  total flux cleaned = 7.01796e-05 Jy
! Component: 150  -  total flux cleaned = 9.20833e-05 Jy
! Component: 200  -  total flux cleaned = 9.25005e-05 Jy
! Total flux subtracted in 200 components = 9.25005e-05 Jy
! Clean residual min=-0.002304 max=0.002350 Jy/beam
! Clean residual mean=-0.000015 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.102897 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 210 components and 0.102897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096594Jy  sigma=0.037650
! Fit after  self-cal, rms=0.096606Jy  sigma=0.037649
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.439 mas, bmaj=6.822 mas, bpa=26.29 degrees
! Estimated noise=10.2146 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.439 x 6.822 at 26.29 degrees (North through East)
! Clean map  min=-0.0025486  max=0.059619 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.436 mas, bmaj=5.611 mas, bpa=28.5 degrees
! Estimated noise=26.9887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0475085 Jy
! Component: 100  -  total flux cleaned = 0.061814 Jy
! Component: 150  -  total flux cleaned = 0.0696622 Jy
! Component: 200  -  total flux cleaned = 0.0757486 Jy
! Total flux subtracted in 200 components = 0.0757486 Jy
! Clean residual min=-0.006141 max=0.005622 Jy/beam
! Clean residual mean=0.000001 rms=0.001334 Jy/beam
! Combined flux in latest and established models = 0.0757486 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0757486 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.439 mas, bmaj=6.822 mas, bpa=26.29 degrees
! Estimated noise=10.2146 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0074021 Jy
! Component: 100  -  total flux cleaned = 0.0123704 Jy
! Component: 150  -  total flux cleaned = 0.0159211 Jy
! Component: 200  -  total flux cleaned = 0.0181348 Jy
! Total flux subtracted in 200 components = 0.0181348 Jy
! Clean residual min=-0.002420 max=0.002741 Jy/beam
! Clean residual mean=-0.000007 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.0938834 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 65 components and 0.0938834 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.931 mas, bmaj=10.11 mas, bpa=23.17 degrees
! Estimated noise=10.9731 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00357469 Jy
! Component: 100  -  total flux cleaned = 0.00536125 Jy
! Component: 150  -  total flux cleaned = 0.0065214 Jy
! Component: 200  -  total flux cleaned = 0.00699765 Jy
! Total flux subtracted in 200 components = 0.00699765 Jy
! Clean residual min=-0.002605 max=0.002682 Jy/beam
! Clean residual mean=-0.000015 rms=0.000711 Jy/beam
! Combined flux in latest and established models = 0.100881 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000288673 Jy
! Component: 100  -  total flux cleaned = 0.000536767 Jy
! Component: 150  -  total flux cleaned = 0.00071013 Jy
! Component: 200  -  total flux cleaned = 0.000865623 Jy
! Total flux subtracted in 200 components = 0.000865623 Jy
! Clean residual min=-0.002453 max=0.002510 Jy/beam
! Clean residual mean=-0.000016 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.101747 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 136 components and 0.101747 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.439 mas, bmaj=6.822 mas, bpa=26.29 degrees
! Estimated noise=10.2146 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000450926 Jy
! Component: 100  -  total flux cleaned = 0.000527266 Jy
! Component: 150  -  total flux cleaned = 0.000525862 Jy
! Component: 200  -  total flux cleaned = 0.000592484 Jy
! Total flux subtracted in 200 components = 0.000592484 Jy
! Clean residual min=-0.001917 max=0.002068 Jy/beam
! Clean residual mean=-0.000008 rms=0.000503 Jy/beam
! Combined flux in latest and established models = 0.102339 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 156 components and 0.102339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096645Jy  sigma=0.037663
! Fit after  self-cal, rms=0.096655Jy  sigma=0.037657
wmodel /scr/pima/rdv93_uvs/J0908+4150_S_map.mod
! Writing 156 model components to file: /scr/pima/rdv93_uvs/J0908+4150_S_map.mod
wobs /scr/pima/rdv93_uvs/J0908+4150_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv93_uvs/J0908+4150_S_uvs.fits
wwins /scr/pima/rdv93_uvs/J0908+4150_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rdv93_uvs/J0908+4150_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 7.61126e-05 Jy
! Component: 100  -  total flux cleaned = 0.000137435 Jy
! Component: 150  -  total flux cleaned = 0.000139571 Jy
! Component: 200  -  total flux cleaned = 5.21911e-05 Jy
! Component: 250  -  total flux cleaned = -0.000118131 Jy
! Component: 300  -  total flux cleaned = -0.000309833 Jy
! Component: 350  -  total flux cleaned = -0.000309685 Jy
! Component: 400  -  total flux cleaned = -0.000257918 Jy
! Component: 450  -  total flux cleaned = -0.000182091 Jy
! Component: 500  -  total flux cleaned = -0.000157667 Jy
! Component: 550  -  total flux cleaned = -0.00018139 Jy
! Component: 600  -  total flux cleaned = -0.000110344 Jy
! Component: 650  -  total flux cleaned = -1.78861e-05 Jy
! Component: 700  -  total flux cleaned = 4.61217e-06 Jy
! Component: 750  -  total flux cleaned = 5.05178e-06 Jy
! Component: 800  -  total flux cleaned = 7.06924e-05 Jy
! Component: 850  -  total flux cleaned = 7.05388e-05 Jy
! Component: 900  -  total flux cleaned = 4.94425e-05 Jy
! Component: 950  -  total flux cleaned = 7.00215e-05 Jy
! Component: 1000  -  total flux cleaned = 9.01961e-05 Jy
! Component: 1050  -  total flux cleaned = 9.00886e-05 Jy
! Component: 1100  -  total flux cleaned = 0.000109832 Jy
! Component: 1150  -  total flux cleaned = 0.000109515 Jy
! Component: 1200  -  total flux cleaned = 0.000129037 Jy
! Component: 1250  -  total flux cleaned = 0.000110598 Jy
! Component: 1300  -  total flux cleaned = 0.000148527 Jy
! Component: 1350  -  total flux cleaned = 0.00020363 Jy
! Component: 1400  -  total flux cleaned = 0.00025759 Jy
! Component: 1450  -  total flux cleaned = 0.000256917 Jy
! Component: 1500  -  total flux cleaned = 0.000238952 Jy
! Component: 1550  -  total flux cleaned = 0.000186172 Jy
! Component: 1600  -  total flux cleaned = 0.000220804 Jy
! Component: 1650  -  total flux cleaned = 0.000220738 Jy
! Component: 1700  -  total flux cleaned = 0.000254442 Jy
! Component: 1750  -  total flux cleaned = 0.000204083 Jy
! Component: 1800  -  total flux cleaned = 0.000286976 Jy
! Component: 1850  -  total flux cleaned = 0.000286817 Jy
! Component: 1900  -  total flux cleaned = 0.000303175 Jy
! Component: 1950  -  total flux cleaned = 0.000271098 Jy
! Component: 2000  -  total flux cleaned = 0.000335029 Jy
! Component: 2050  -  total flux cleaned = 0.000319318 Jy
! Component: 2100  -  total flux cleaned = 0.000381733 Jy
! Component: 2150  -  total flux cleaned = 0.000381779 Jy
! Component: 2200  -  total flux cleaned = 0.000381691 Jy
! Component: 2250  -  total flux cleaned = 0.000366261 Jy
! Component: 2300  -  total flux cleaned = 0.000291269 Jy
! Component: 2350  -  total flux cleaned = 0.000321041 Jy
! Component: 2400  -  total flux cleaned = 0.00029163 Jy
! Component: 2450  -  total flux cleaned = 0.000262245 Jy
! Component: 2500  -  total flux cleaned = 0.00021878 Jy
! Component: 2550  -  total flux cleaned = 0.000218972 Jy
! Component: 2600  -  total flux cleaned = 0.000176399 Jy
! Component: 2650  -  total flux cleaned = 0.00019065 Jy
! Component: 2700  -  total flux cleaned = 0.000204683 Jy
! Component: 2750  -  total flux cleaned = 0.000163255 Jy
! Component: 2800  -  total flux cleaned = 0.000177085 Jy
! Component: 2850  -  total flux cleaned = 0.000177073 Jy
! Component: 2900  -  total flux cleaned = 0.000204303 Jy
! Component: 2950  -  total flux cleaned = 0.00023108 Jy
! Component: 3000  -  total flux cleaned = 0.00021769 Jy
! Component: 3050  -  total flux cleaned = 0.000178125 Jy
! Component: 3100  -  total flux cleaned = 0.000230541 Jy
! Component: 3150  -  total flux cleaned = 0.000191585 Jy
! Component: 3200  -  total flux cleaned = 0.000243454 Jy
! Component: 3250  -  total flux cleaned = 0.000230609 Jy
! Component: 3300  -  total flux cleaned = 0.000256114 Jy
! Component: 3350  -  total flux cleaned = 0.000294064 Jy
! Component: 3400  -  total flux cleaned = 0.000306734 Jy
! Component: 3450  -  total flux cleaned = 0.000319049 Jy
! Component: 3500  -  total flux cleaned = 0.000343725 Jy
! Component: 3550  -  total flux cleaned = 0.000405127 Jy
! Component: 3600  -  total flux cleaned = 0.000380656 Jy
! Component: 3650  -  total flux cleaned = 0.000368338 Jy
! Component: 3700  -  total flux cleaned = 0.000380455 Jy
! Component: 3750  -  total flux cleaned = 0.000416318 Jy
! Component: 3800  -  total flux cleaned = 0.000428109 Jy
! Component: 3850  -  total flux cleaned = 0.000416388 Jy
! Component: 3900  -  total flux cleaned = 0.000498524 Jy
! Component: 3950  -  total flux cleaned = 0.000510075 Jy
! Component: 4000  -  total flux cleaned = 0.000521715 Jy
! Component: 4050  -  total flux cleaned = 0.00055647 Jy
! Total flux subtracted in 4096 components = 0.00060236 Jy
! Clean residual min=-0.000649 max=0.000759 Jy/beam
! Clean residual mean=-0.000003 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.102942 Jy
keep
! Adding 294 model components to the UV plane model.
! The established model now contains 450 components and 0.102942 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rdv93_uvs/J0908+4150_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.439 x 6.822 at 26.29 degrees (North through East)
! Clean map  min=-0.0024317  max=0.058721 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv93_uvs/J0908+4150_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0587209 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000212894 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.08766 1.08766 2.17532 4.35063 8.70127 17.4025 34.8051 69.6101
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.058 
quit
! Quitting program
! Log file /scr/pima/rdv93_uvs/J0908+4150_S_uvs.log closed on Tue Sep 24 17:06:15 2013