! Started logfile: /scr/pima/rdv93_uvs/J0437-1844_S_uvs.log on Tue Sep 24 17:05:15 2013
obs /scr/pima/rdv93_uvs/J0437-1844_S_uva.fits
! Reading UV FITS file: /scr/pima/rdv93_uvs/J0437-1844_S_uva.fits
! AN table 1: 26 integrations on 10 of 10 possible baselines.
! AN table 2: 11 integrations on 3 of 3 possible baselines.
! AN table 3: 12 integrations on 15 of 15 possible baselines.
! AN table 4: 11 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.865362 visibilities/baseline/integration-bin.
! Found source: J0437-1844
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09      1.6e+07          1      1.6e+07
!  02        2  2.26693e+09      1.6e+07          1      1.6e+07
!  03        3  2.35693e+09      1.6e+07          1      1.6e+07
!  04        4  2.37693e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3008 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/rdv93_uvs/J0437-1844_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 3.
!  A total of 2 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 3.
!  A total of 2 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 3.
!  A total of 2 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
!  A total of 1 telescope corrections were flagged in sub-array 3.
!  A total of 2 telescope corrections were flagged in sub-array 4.
! 
! Fit before self-cal, rms=1.344350Jy  sigma=8.550945
! Fit after  self-cal, rms=0.239157Jy  sigma=1.300808
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.147 mas, bmaj=12.45 mas, bpa=-18.96 degrees
! Estimated noise=2.70649 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.665946 Jy
! Component: 100  -  total flux cleaned = 0.813327 Jy
! Total flux subtracted in 100 components = 0.813327 Jy
! Clean residual min=-0.029693 max=0.048461 Jy/beam
! Clean residual mean=0.000350 rms=0.007745 Jy/beam
! Combined flux in latest and established models = 0.813327 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.813327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.195343Jy  sigma=1.146049
! Fit after  self-cal, rms=0.195299Jy  sigma=1.145423
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0509013 Jy
! Component: 100  -  total flux cleaned = 0.0765778 Jy
! Total flux subtracted in 100 components = 0.0765778 Jy
! Clean residual min=-0.025940 max=0.022611 Jy/beam
! Clean residual mean=0.000152 rms=0.005566 Jy/beam
! Combined flux in latest and established models = 0.889905 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 34 components and 0.889905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183170Jy  sigma=1.027680
! Fit after  self-cal, rms=0.183235Jy  sigma=1.027207
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.127 mas, bmaj=13.79 mas, bpa=-17.76 degrees
! Estimated noise=2.10301 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.018958 Jy
! Component: 100  -  total flux cleaned = 0.0294252 Jy
! Component: 150  -  total flux cleaned = 0.0357711 Jy
! Component: 200  -  total flux cleaned = 0.0370729 Jy
! Total flux subtracted in 200 components = 0.0370729 Jy
! Clean residual min=-0.024551 max=0.020939 Jy/beam
! Clean residual mean=0.000190 rms=0.005609 Jy/beam
! Combined flux in latest and established models = 0.926978 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 62 components and 0.926978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.181995Jy  sigma=1.008323
! Fit after  self-cal, rms=0.182020Jy  sigma=1.008282
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     LA        1.07     NL        1.09     OV        0.99     
!   PT        1.00     
! 
!  A total of 33 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    LA        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.95     FD        1.00     KP        1.03     MK        0.93     
!   OV        0.97     PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.92     FD        0.99     HN        0.99     KP        1.02     
!   LA        1.14     MK        0.91     NL        0.99     OV        0.96     
!   PT        1.04     
! 
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     LA        1.03     NL        1.13     OV        1.05     
!   PT        1.01     
! 
!  A total of 33 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    LA        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.02     FD        1.10     KP        1.02     MK        1.07     
!   OV        1.01     PT        1.01     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.02     FD        1.06     HN        1.12     KP        1.02     
!   LA        1.02     MK        0.98     NL        1.02     OV        0.99     
!   PT        1.05     
! 
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     LA        0.92     NL        1.23     OV        1.03     
!   PT        1.07     
! 
!  A total of 33 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    LA        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.03     FD        1.07     KP        0.88     MK        1.04     
!   OV        1.00     PT        1.10     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.03     FD        1.09     HN        1.00     KP        0.90     
!   LA        0.96     MK        0.98     NL        1.09     OV        1.02     
!   PT        1.08     
! 
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     LA        0.83     NL        1.14     OV        0.85     
!   PT        0.93     
! 
!  A total of 33 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    LA        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.06     FD        1.06     KP        0.82     MK        1.23     
!   OV        0.88     PT        0.96     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.06     FD        1.04     HN        0.98     KP        0.82     
!   LA        0.81     MK        1.11     NL        1.01     OV        0.87     
!   PT        0.97     
! 
! 
! Fit before self-cal, rms=0.182020Jy  sigma=1.008282
! Fit after  self-cal, rms=0.154775Jy  sigma=0.759711
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.006 mas, bmaj=13.5 mas, bpa=-17.74 degrees
! Estimated noise=2.15208 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00425428 Jy
! Component: 100  -  total flux cleaned = -0.0045782 Jy
! Component: 150  -  total flux cleaned = -0.00466769 Jy
! Component: 200  -  total flux cleaned = -0.00458692 Jy
! Total flux subtracted in 200 components = -0.00458692 Jy
! Clean residual min=-0.012032 max=0.010275 Jy/beam
! Clean residual mean=-0.000042 rms=0.003069 Jy/beam
! Combined flux in latest and established models = 0.922391 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 71 components and 0.922391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154535Jy  sigma=0.758974
! Fit after  self-cal, rms=0.154867Jy  sigma=0.758605
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154867Jy  sigma=0.758605
! Fit after  self-cal, rms=0.154815Jy  sigma=0.758444
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.012 mas, bmaj=13.51 mas, bpa=-17.73 degrees
! Estimated noise=2.14949 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00310161 Jy
! Component: 100  -  total flux cleaned = -0.00335769 Jy
! Component: 150  -  total flux cleaned = -0.00328821 Jy
! Component: 200  -  total flux cleaned = -0.00322291 Jy
! Total flux subtracted in 200 components = -0.00322291 Jy
! Clean residual min=-0.011814 max=0.010159 Jy/beam
! Clean residual mean=-0.000041 rms=0.003045 Jy/beam
! Combined flux in latest and established models = 0.919168 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 82 components and 0.919168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154619Jy  sigma=0.758253
! Fit after  self-cal, rms=0.154690Jy  sigma=0.758187
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.33199e-05 Jy
! Component: 100  -  total flux cleaned = 3.88414e-05 Jy
! Component: 150  -  total flux cleaned = 9.64863e-05 Jy
! Component: 200  -  total flux cleaned = 9.63296e-05 Jy
! Total flux subtracted in 200 components = 9.63296e-05 Jy
! Clean residual min=-0.011782 max=0.010033 Jy/beam
! Clean residual mean=-0.000041 rms=0.003039 Jy/beam
! Combined flux in latest and established models = 0.919265 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 86 components and 0.919265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154552Jy  sigma=0.758160
! Fit after  self-cal, rms=0.154623Jy  sigma=0.758090
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154623Jy  sigma=0.758090
! Fit after  self-cal, rms=0.154480Jy  sigma=0.757959
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.016 mas, bmaj=13.51 mas, bpa=-17.72 degrees
! Estimated noise=2.14636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00260649 Jy
! Component: 100  -  total flux cleaned = -0.00279501 Jy
! Component: 150  -  total flux cleaned = -0.00274214 Jy
! Component: 200  -  total flux cleaned = -0.00269055 Jy
! Total flux subtracted in 200 components = -0.00269055 Jy
! Clean residual min=-0.011728 max=0.009982 Jy/beam
! Clean residual mean=-0.000036 rms=0.003025 Jy/beam
! Combined flux in latest and established models = 0.916574 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 95 components and 0.916574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154324Jy  sigma=0.757955
! Fit after  self-cal, rms=0.154399Jy  sigma=0.757884
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.42309e-05 Jy
! Component: 100  -  total flux cleaned = 7.21763e-05 Jy
! Component: 150  -  total flux cleaned = 0.000120332 Jy
! Component: 200  -  total flux cleaned = 0.000167029 Jy
! Total flux subtracted in 200 components = 0.000167029 Jy
! Clean residual min=-0.011739 max=0.009942 Jy/beam
! Clean residual mean=-0.000037 rms=0.003020 Jy/beam
! Combined flux in latest and established models = 0.916741 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 98 components and 0.916741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154281Jy  sigma=0.757937
! Fit after  self-cal, rms=0.154351Jy  sigma=0.757861
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154351Jy  sigma=0.757861
! Fit after  self-cal, rms=0.154174Jy  sigma=0.757748
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.175 mas, bmaj=18.61 mas, bpa=6.06 degrees
! Estimated noise=2.36134 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00210795 Jy
! Component: 100  -  total flux cleaned = -0.00239409 Jy
! Component: 150  -  total flux cleaned = -0.00245299 Jy
! Component: 200  -  total flux cleaned = -0.00240644 Jy
! Total flux subtracted in 200 components = -0.00240644 Jy
! Clean residual min=-0.013616 max=0.011848 Jy/beam
! Clean residual mean=-0.000054 rms=0.003904 Jy/beam
! Combined flux in latest and established models = 0.914335 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 111 components and 0.914335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154076Jy  sigma=0.757857
! Fit after  self-cal, rms=0.154100Jy  sigma=0.757787
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.37861e-05 Jy
! Component: 100  -  total flux cleaned = 0.00016744 Jy
! Component: 150  -  total flux cleaned = 0.000167038 Jy
! Component: 200  -  total flux cleaned = 0.000205357 Jy
! Total flux subtracted in 200 components = 0.000205357 Jy
! Clean residual min=-0.013570 max=0.011900 Jy/beam
! Clean residual mean=-0.000056 rms=0.003902 Jy/beam
! Combined flux in latest and established models = 0.91454 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 113 components and 0.91454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154016Jy  sigma=0.757977
! Fit after  self-cal, rms=0.154055Jy  sigma=0.757914
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.021 mas, bmaj=13.52 mas, bpa=-17.7 degrees
! Estimated noise=2.143 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.021 x 13.52 at -17.7 degrees (North through East)
! Clean map  min=-0.011667  max=0.85647 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154055Jy  sigma=0.757914
! Fit after  self-cal, rms=0.824703Jy  sigma=0.573777
! Inverting map and beam 
! Estimated beam: bmin=4.028 mas, bmaj=13.55 mas, bpa=-17.76 degrees
! Estimated noise=2.14417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00187904 Jy
! Component: 100  -  total flux cleaned = -0.00226373 Jy
! Component: 150  -  total flux cleaned = -0.00250634 Jy
! Component: 200  -  total flux cleaned = -0.00266396 Jy
! Total flux subtracted in 200 components = -0.00266396 Jy
! Clean residual min=-0.010450 max=0.009970 Jy/beam
! Clean residual mean=-0.000030 rms=0.002920 Jy/beam
! Combined flux in latest and established models = 0.911876 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 133 components and 0.911876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.824711Jy  sigma=0.573377
! Fit after  self-cal, rms=0.824710Jy  sigma=0.573248
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.28276e-05 Jy
! Component: 100  -  total flux cleaned = -5.57426e-05 Jy
! Component: 150  -  total flux cleaned = -0.000194072 Jy
! Component: 200  -  total flux cleaned = -0.000360277 Jy
! Total flux subtracted in 200 components = -0.000360277 Jy
! Clean residual min=-0.010329 max=0.009966 Jy/beam
! Clean residual mean=-0.000028 rms=0.002920 Jy/beam
! Combined flux in latest and established models = 0.911516 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 136 components and 0.911516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.824731Jy  sigma=0.573200
! Fit after  self-cal, rms=0.824732Jy  sigma=0.573077
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.824732Jy  sigma=0.573077
! Fit after  self-cal, rms=0.837427Jy  sigma=0.572908
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.161 mas, bmaj=12.59 mas, bpa=-19.03 degrees
! Estimated noise=2.72654 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.665133 Jy
! Component: 100  -  total flux cleaned = 0.811976 Jy
! Component: 150  -  total flux cleaned = 0.855414 Jy
! Component: 200  -  total flux cleaned = 0.877081 Jy
! Total flux subtracted in 200 components = 0.877081 Jy
! Clean residual min=-0.011577 max=0.013053 Jy/beam
! Clean residual mean=0.000079 rms=0.003004 Jy/beam
! Combined flux in latest and established models = 0.877081 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.877081 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.029 mas, bmaj=13.57 mas, bpa=-17.77 degrees
! Estimated noise=2.14467 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0151676 Jy
! Component: 100  -  total flux cleaned = 0.0229667 Jy
! Component: 150  -  total flux cleaned = 0.0270852 Jy
! Component: 200  -  total flux cleaned = 0.02817 Jy
! Total flux subtracted in 200 components = 0.02817 Jy
! Clean residual min=-0.010016 max=0.010799 Jy/beam
! Clean residual mean=-0.000002 rms=0.002972 Jy/beam
! Combined flux in latest and established models = 0.905251 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 67 components and 0.905251 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.19 mas, bmaj=18.64 mas, bpa=5.958 degrees
! Estimated noise=2.35968 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00238727 Jy
! Component: 100  -  total flux cleaned = 0.00260099 Jy
! Component: 150  -  total flux cleaned = 0.00260215 Jy
! Component: 200  -  total flux cleaned = 0.00265572 Jy
! Total flux subtracted in 200 components = 0.00265572 Jy
! Clean residual min=-0.012040 max=0.011521 Jy/beam
! Clean residual mean=-0.000029 rms=0.003865 Jy/beam
! Combined flux in latest and established models = 0.907907 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.31805e-05 Jy
! Component: 100  -  total flux cleaned = 8.30666e-05 Jy
! Component: 150  -  total flux cleaned = 0.00012333 Jy
! Component: 200  -  total flux cleaned = 0.000197103 Jy
! Total flux subtracted in 200 components = 0.000197103 Jy
! Clean residual min=-0.012076 max=0.011573 Jy/beam
! Clean residual mean=-0.000031 rms=0.003855 Jy/beam
! Combined flux in latest and established models = 0.908104 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 84 components and 0.908104 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.029 mas, bmaj=13.57 mas, bpa=-17.77 degrees
! Estimated noise=2.14467 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000478427 Jy
! Component: 100  -  total flux cleaned = 0.000221125 Jy
! Component: 150  -  total flux cleaned = 0.000296 Jy
! Component: 200  -  total flux cleaned = 0.000428449 Jy
! Total flux subtracted in 200 components = 0.000428449 Jy
! Clean residual min=-0.010397 max=0.010676 Jy/beam
! Clean residual mean=-0.000021 rms=0.002941 Jy/beam
! Combined flux in latest and established models = 0.908533 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 91 components and 0.908533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.837969Jy  sigma=0.573464
! Fit after  self-cal, rms=0.837946Jy  sigma=0.573257
wmodel /scr/pima/rdv93_uvs/J0437-1844_S_map.mod
! Writing 91 model components to file: /scr/pima/rdv93_uvs/J0437-1844_S_map.mod
wobs /scr/pima/rdv93_uvs/J0437-1844_S_uvs.fits
! Writing UV FITS file: /scr/pima/rdv93_uvs/J0437-1844_S_uvs.fits
wwins /scr/pima/rdv93_uvs/J0437-1844_S_map.win
! wwins: Wrote 1 windows to /scr/pima/rdv93_uvs/J0437-1844_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 4.46164e-05 Jy
! Component: 100  -  total flux cleaned = -0.000635464 Jy
! Component: 150  -  total flux cleaned = -0.0011058 Jy
! Component: 200  -  total flux cleaned = -0.00140707 Jy
! Component: 250  -  total flux cleaned = -0.00155224 Jy
! Component: 300  -  total flux cleaned = -0.00183076 Jy
! Component: 350  -  total flux cleaned = -0.0018287 Jy
! Component: 400  -  total flux cleaned = -0.00156357 Jy
! Component: 450  -  total flux cleaned = -0.00156282 Jy
! Component: 500  -  total flux cleaned = -0.00131424 Jy
! Component: 550  -  total flux cleaned = -0.00119557 Jy
! Component: 600  -  total flux cleaned = -0.00119621 Jy
! Component: 650  -  total flux cleaned = -0.000852019 Jy
! Component: 700  -  total flux cleaned = -0.000852654 Jy
! Component: 750  -  total flux cleaned = -0.000631598 Jy
! Component: 800  -  total flux cleaned = -0.00041667 Jy
! Component: 850  -  total flux cleaned = -0.000309548 Jy
! Component: 900  -  total flux cleaned = -0.000101841 Jy
! Component: 950  -  total flux cleaned = -3.97271e-07 Jy
! Component: 1000  -  total flux cleaned = 0.000101075 Jy
! Component: 1050  -  total flux cleaned = 0.000298243 Jy
! Component: 1100  -  total flux cleaned = 0.000394751 Jy
! Component: 1150  -  total flux cleaned = 0.000490035 Jy
! Component: 1200  -  total flux cleaned = 0.000583703 Jy
! Component: 1250  -  total flux cleaned = 0.000584806 Jy
! Component: 1300  -  total flux cleaned = 0.000949017 Jy
! Component: 1350  -  total flux cleaned = 0.00121708 Jy
! Component: 1400  -  total flux cleaned = 0.00148136 Jy
! Component: 1450  -  total flux cleaned = 0.00148021 Jy
! Component: 1500  -  total flux cleaned = 0.00165164 Jy
! Component: 1550  -  total flux cleaned = 0.00156647 Jy
! Component: 1600  -  total flux cleaned = 0.00156689 Jy
! Component: 1650  -  total flux cleaned = 0.00156643 Jy
! Component: 1700  -  total flux cleaned = 0.00148499 Jy
! Component: 1750  -  total flux cleaned = 0.00156524 Jy
! Component: 1800  -  total flux cleaned = 0.00148469 Jy
! Component: 1850  -  total flux cleaned = 0.00148448 Jy
! Component: 1900  -  total flux cleaned = 0.00140712 Jy
! Component: 1950  -  total flux cleaned = 0.00133033 Jy
! Component: 2000  -  total flux cleaned = 0.00102685 Jy
! Component: 2050  -  total flux cleaned = 0.00110271 Jy
! Component: 2100  -  total flux cleaned = 0.000954126 Jy
! Component: 2150  -  total flux cleaned = 0.00095363 Jy
! Component: 2200  -  total flux cleaned = 0.000663255 Jy
! Component: 2250  -  total flux cleaned = 0.000520021 Jy
! Component: 2300  -  total flux cleaned = 0.000520527 Jy
! Component: 2350  -  total flux cleaned = 0.000240657 Jy
! Component: 2400  -  total flux cleaned = 0.000310223 Jy
! Component: 2450  -  total flux cleaned = 0.000241361 Jy
! Component: 2500  -  total flux cleaned = 0.000308417 Jy
! Component: 2550  -  total flux cleaned = 0.000173517 Jy
! Component: 2600  -  total flux cleaned = 0.000107192 Jy
! Component: 2650  -  total flux cleaned = 0.000239564 Jy
! Component: 2700  -  total flux cleaned = 0.000238889 Jy
! Component: 2750  -  total flux cleaned = 0.000109298 Jy
! Component: 2800  -  total flux cleaned = 4.4729e-05 Jy
! Component: 2850  -  total flux cleaned = -0.000145558 Jy
! Component: 2900  -  total flux cleaned = -8.25326e-05 Jy
! Component: 2950  -  total flux cleaned = -1.98557e-05 Jy
! Component: 3000  -  total flux cleaned = -8.16715e-05 Jy
! Component: 3050  -  total flux cleaned = -0.000142632 Jy
! Component: 3100  -  total flux cleaned = -0.00014262 Jy
! Component: 3150  -  total flux cleaned = -0.00038294 Jy
! Component: 3200  -  total flux cleaned = -0.000144973 Jy
! Component: 3250  -  total flux cleaned = -8.51877e-05 Jy
! Component: 3300  -  total flux cleaned = -8.53159e-05 Jy
! Component: 3350  -  total flux cleaned = -8.54646e-05 Jy
! Component: 3400  -  total flux cleaned = -8.57933e-05 Jy
! Component: 3450  -  total flux cleaned = -2.88964e-05 Jy
! Component: 3500  -  total flux cleaned = -8.65958e-05 Jy
! Component: 3550  -  total flux cleaned = 0.000138666 Jy
! Component: 3600  -  total flux cleaned = 8.26032e-05 Jy
! Component: 3650  -  total flux cleaned = 0.000193702 Jy
! Component: 3700  -  total flux cleaned = 0.000303911 Jy
! Component: 3750  -  total flux cleaned = 0.000303727 Jy
! Component: 3800  -  total flux cleaned = 0.000357561 Jy
! Component: 3850  -  total flux cleaned = 0.000573364 Jy
! Component: 3900  -  total flux cleaned = 0.000572936 Jy
! Component: 3950  -  total flux cleaned = 0.000732108 Jy
! Component: 4000  -  total flux cleaned = 0.000573732 Jy
! Component: 4050  -  total flux cleaned = 0.000783185 Jy
! Total flux subtracted in 4096 components = 0.000939365 Jy
! Clean residual min=-0.003069 max=0.002918 Jy/beam
! Clean residual mean=-0.000009 rms=0.001181 Jy/beam
! Combined flux in latest and established models = 0.909472 Jy
keep
! Adding 411 model components to the UV plane model.
! The established model now contains 502 components and 0.909472 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/rdv93_uvs/J0437-1844_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.029 x 13.57 at -17.77 degrees (North through East)
! Clean map  min=-0.0087772  max=0.85377 Jy/beam
! Writing clean map to FITS file: /scr/pima/rdv93_uvs/J0437-1844_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.853766 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00114847 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.403555 0.403555 0.807109 1.61422 3.22844 6.45688 12.9138 25.8275 51.655
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0034 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.853 
quit
! Quitting program
! Log file /scr/pima/rdv93_uvs/J0437-1844_S_uvs.log closed on Tue Sep 24 17:05:20 2013