! Started logfile: /g0/scr/pima/npcsb_uvs/J2310+8857_X_uvs.log on Wed Sep 25 00:08:20 2013 obs /g0/scr/pima/npcsb_uvs/J2310+8857_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J2310+8857_X_uva.fits ! AN table 1: 46 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.736715 visibilities/baseline/integration-bin. ! Found source: J2310+8857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 8e+06 1 8e+06 ! 02 2 8.47993e+09 8e+06 1 8e+06 ! 03 3 8.79493e+09 8e+06 1 8e+06 ! 04 4 8.89993e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4880 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J2310+8857_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 50 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.055273Jy sigma=2.243690 ! Fit after self-cal, rms=0.983808Jy sigma=2.095158 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.152 mas, bmaj=3.514 mas, bpa=-8.068 degrees ! Estimated noise=7.73113 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0417188 Jy ! Component: 100 - total flux cleaned = 0.051436 Jy ! Total flux subtracted in 100 components = 0.051436 Jy ! Clean residual min=-0.006644 max=0.008040 Jy/beam ! Clean residual mean=0.000003 rms=0.001866 Jy/beam ! Combined flux in latest and established models = 0.051436 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.051436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303002Jy sigma=0.175774 ! Fit after self-cal, rms=0.302423Jy sigma=0.171353 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.479 mas, bmaj=3.769 mas, bpa=-6.793 degrees ! Estimated noise=4.72539 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134128 Jy ! Component: 100 - total flux cleaned = 0.0205572 Jy ! Component: 150 - total flux cleaned = 0.0247841 Jy ! Component: 200 - total flux cleaned = 0.0274416 Jy ! Total flux subtracted in 200 components = 0.0274416 Jy ! Clean residual min=-0.004420 max=0.004692 Jy/beam ! Clean residual mean=0.000004 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.0788776 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 45 components and 0.0788776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.301816Jy sigma=0.165679 ! Fit after self-cal, rms=0.301754Jy sigma=0.165335 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.93 HN 1.10 KP 1.09 ! LA 1.00 MK 1.00* NL 1.22 OV 0.92 ! PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.88 HN 1.06 KP 1.01 ! LA 1.01 MK 1.00* NL 1.24 OV 0.90 ! PT 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.88 HN 0.87 KP 0.92 ! LA 1.00 MK 1.00* NL 1.10 OV 0.86 ! PT 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 0.82 KP 0.95 ! LA 1.04 MK 1.00* NL 1.05 OV 0.97 ! PT 1.05 ! ! ! Fit before self-cal, rms=0.301754Jy sigma=0.165335 ! Fit after self-cal, rms=0.299291Jy sigma=0.164084 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.466 mas, bmaj=3.821 mas, bpa=-7.343 degrees ! Estimated noise=4.66387 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.6, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00416452 Jy ! Component: 100 - total flux cleaned = 0.00608854 Jy ! Component: 150 - total flux cleaned = 0.00697685 Jy ! Component: 200 - total flux cleaned = 0.00725632 Jy ! Total flux subtracted in 200 components = 0.00725632 Jy ! Clean residual min=-0.003097 max=0.002567 Jy/beam ! Clean residual mean=0.000004 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.0861339 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 62 components and 0.0861339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299186Jy sigma=0.163587 ! Fit after self-cal, rms=0.299157Jy sigma=0.163360 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299157Jy sigma=0.163360 ! Fit after self-cal, rms=0.290073Jy sigma=0.163328 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.459 mas, bmaj=3.809 mas, bpa=-7.311 degrees ! Estimated noise=4.64483 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175159 Jy ! Component: 100 - total flux cleaned = 0.00211545 Jy ! Component: 150 - total flux cleaned = 0.00224371 Jy ! Component: 200 - total flux cleaned = 0.00235046 Jy ! Total flux subtracted in 200 components = 0.00235046 Jy ! Clean residual min=-0.003090 max=0.002525 Jy/beam ! Clean residual mean=0.000004 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0884844 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 0.0884844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290037Jy sigma=0.163194 ! Fit after self-cal, rms=0.290020Jy sigma=0.163161 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000673614 Jy ! Component: 100 - total flux cleaned = 0.000784247 Jy ! Component: 150 - total flux cleaned = 0.00081504 Jy ! Component: 200 - total flux cleaned = 0.000840675 Jy ! Total flux subtracted in 200 components = 0.000840675 Jy ! Clean residual min=-0.003033 max=0.002543 Jy/beam ! Clean residual mean=0.000004 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0893251 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 82 components and 0.089325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290005Jy sigma=0.163100 ! Fit after self-cal, rms=0.289993Jy sigma=0.163086 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289993Jy sigma=0.163086 ! Fit after self-cal, rms=0.283670Jy sigma=0.163069 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.454 mas, bmaj=3.8 mas, bpa=-7.318 degrees ! Estimated noise=4.63206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213856 Jy ! Component: 100 - total flux cleaned = 0.000459493 Jy ! Component: 150 - total flux cleaned = 0.000536455 Jy ! Component: 200 - total flux cleaned = 0.000604821 Jy ! Total flux subtracted in 200 components = 0.000604821 Jy ! Clean residual min=-0.003046 max=0.002376 Jy/beam ! Clean residual mean=0.000004 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0899299 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 91 components and 0.0899299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283658Jy sigma=0.163028 ! Fit after self-cal, rms=0.283656Jy sigma=0.163021 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223208 Jy ! Component: 100 - total flux cleaned = 0.000222762 Jy ! Component: 150 - total flux cleaned = 0.000222577 Jy ! Component: 200 - total flux cleaned = 0.000203905 Jy ! Total flux subtracted in 200 components = 0.000203905 Jy ! Clean residual min=-0.003022 max=0.002370 Jy/beam ! Clean residual mean=0.000004 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0901338 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 98 components and 0.0901338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283651Jy sigma=0.162997 ! Fit after self-cal, rms=0.283649Jy sigma=0.162995 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283649Jy sigma=0.162995 ! Fit after self-cal, rms=0.281786Jy sigma=0.162988 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.436 mas, bmaj=4.082 mas, bpa=2.368 degrees ! Estimated noise=4.97155 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.06429e-05 Jy ! Component: 100 - total flux cleaned = -0.000241508 Jy ! Component: 150 - total flux cleaned = -0.000312206 Jy ! Component: 200 - total flux cleaned = -0.00036352 Jy ! Total flux subtracted in 200 components = -0.00036352 Jy ! Clean residual min=-0.002659 max=0.002335 Jy/beam ! Clean residual mean=0.000005 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.0897703 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 108 components and 0.0897703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281788Jy sigma=0.162979 ! Fit after self-cal, rms=0.281789Jy sigma=0.162976 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.90537e-05 Jy ! Component: 100 - total flux cleaned = -0.000151113 Jy ! Component: 150 - total flux cleaned = -0.000162442 Jy ! Component: 200 - total flux cleaned = -0.000182584 Jy ! Total flux subtracted in 200 components = -0.000182584 Jy ! Clean residual min=-0.002648 max=0.002318 Jy/beam ! Clean residual mean=0.000005 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0895877 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 114 components and 0.0895877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281791Jy sigma=0.162969 ! Fit after self-cal, rms=0.281790Jy sigma=0.162968 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.449 mas, bmaj=3.8 mas, bpa=-7.38 degrees ! Estimated noise=4.61783 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.449 x 3.8 at -7.38 degrees (North through East) ! Clean map min=-0.0028611 max=0.060943 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.118 mas, bmaj=3.534 mas, bpa=-9.026 degrees ! Estimated noise=7.64174 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0436923 Jy ! Component: 100 - total flux cleaned = 0.0539167 Jy ! Component: 150 - total flux cleaned = 0.0588917 Jy ! Component: 200 - total flux cleaned = 0.0630596 Jy ! Total flux subtracted in 200 components = 0.0630596 Jy ! Clean residual min=-0.004988 max=0.005321 Jy/beam ! Clean residual mean=0.000004 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 0.0630596 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0630596 Jy ! Inverting map and beam ! Estimated beam: bmin=1.449 mas, bmaj=3.8 mas, bpa=-7.38 degrees ! Estimated noise=4.61783 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00704434 Jy ! Component: 100 - total flux cleaned = 0.0114805 Jy ! Component: 150 - total flux cleaned = 0.0147062 Jy ! Component: 200 - total flux cleaned = 0.0171251 Jy ! Total flux subtracted in 200 components = 0.0171251 Jy ! Clean residual min=-0.003469 max=0.002691 Jy/beam ! Clean residual mean=0.000006 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.0801847 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 77 components and 0.0801847 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.436 mas, bmaj=4.082 mas, bpa=2.368 degrees ! Estimated noise=4.97155 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262591 Jy ! Component: 100 - total flux cleaned = 0.00429237 Jy ! Component: 150 - total flux cleaned = 0.00550543 Jy ! Component: 200 - total flux cleaned = 0.00638425 Jy ! Total flux subtracted in 200 components = 0.00638425 Jy ! Clean residual min=-0.002776 max=0.002213 Jy/beam ! Clean residual mean=0.000006 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.0865689 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000345037 Jy ! Component: 100 - total flux cleaned = 0.000615176 Jy ! Component: 150 - total flux cleaned = 0.000805756 Jy ! Component: 200 - total flux cleaned = 0.000996773 Jy ! Total flux subtracted in 200 components = 0.000996773 Jy ! Clean residual min=-0.002673 max=0.002087 Jy/beam ! Clean residual mean=0.000005 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.0875657 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 111 components and 0.0875657 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.449 mas, bmaj=3.8 mas, bpa=-7.38 degrees ! Estimated noise=4.61783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123309 Jy ! Component: 100 - total flux cleaned = 0.000208197 Jy ! Component: 150 - total flux cleaned = 0.000283013 Jy ! Component: 200 - total flux cleaned = 0.000388658 Jy ! Total flux subtracted in 200 components = 0.000388658 Jy ! Clean residual min=-0.003020 max=0.002218 Jy/beam ! Clean residual mean=0.000004 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.0879543 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 132 components and 0.0879543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281804Jy sigma=0.162962 ! Fit after self-cal, rms=0.281792Jy sigma=0.162949 wmodel /g0/scr/pima/npcsb_uvs/J2310+8857_X_map.mod ! Writing 132 model components to file: /g0/scr/pima/npcsb_uvs/J2310+8857_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J2310+8857_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J2310+8857_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J2310+8857_X_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J2310+8857_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123549 Jy ! Component: 100 - total flux cleaned = -0.0018646 Jy ! Component: 150 - total flux cleaned = -0.00194224 Jy ! Component: 200 - total flux cleaned = -0.0020873 Jy ! Component: 250 - total flux cleaned = -0.00215618 Jy ! Component: 300 - total flux cleaned = -0.00212344 Jy ! Component: 350 - total flux cleaned = -0.00209322 Jy ! Component: 400 - total flux cleaned = -0.00191069 Jy ! Component: 450 - total flux cleaned = -0.0017044 Jy ! Component: 500 - total flux cleaned = -0.00144669 Jy ! Component: 550 - total flux cleaned = -0.00125151 Jy ! Component: 600 - total flux cleaned = -0.000980054 Jy ! Component: 650 - total flux cleaned = -0.000717446 Jy ! Component: 700 - total flux cleaned = -0.000640721 Jy ! Component: 750 - total flux cleaned = -0.000515709 Jy ! Component: 800 - total flux cleaned = -0.000418439 Jy ! Component: 850 - total flux cleaned = -0.000323006 Jy ! Component: 900 - total flux cleaned = -0.000158119 Jy ! Component: 950 - total flux cleaned = -1.92582e-05 Jy ! Component: 1000 - total flux cleaned = 4.87959e-05 Jy ! Component: 1050 - total flux cleaned = 0.000116156 Jy ! Component: 1100 - total flux cleaned = 0.000204285 Jy ! Component: 1150 - total flux cleaned = 0.000313206 Jy ! Component: 1200 - total flux cleaned = 0.000441895 Jy ! Component: 1250 - total flux cleaned = 0.000505561 Jy ! Component: 1300 - total flux cleaned = 0.000652176 Jy ! Component: 1350 - total flux cleaned = 0.0007759 Jy ! Component: 1400 - total flux cleaned = 0.000877779 Jy ! Component: 1450 - total flux cleaned = 0.00101873 Jy ! Component: 1500 - total flux cleaned = 0.00111832 Jy ! Component: 1550 - total flux cleaned = 0.00129533 Jy ! Component: 1600 - total flux cleaned = 0.00135364 Jy ! Component: 1650 - total flux cleaned = 0.00143076 Jy ! Component: 1700 - total flux cleaned = 0.00154515 Jy ! Component: 1750 - total flux cleaned = 0.00158308 Jy ! Component: 1800 - total flux cleaned = 0.001602 Jy ! Component: 1850 - total flux cleaned = 0.00169511 Jy ! Component: 1900 - total flux cleaned = 0.00171369 Jy ! Component: 1950 - total flux cleaned = 0.0017138 Jy ! Component: 2000 - total flux cleaned = 0.00173193 Jy ! Component: 2050 - total flux cleaned = 0.00174975 Jy ! Component: 2100 - total flux cleaned = 0.00169594 Jy ! Component: 2150 - total flux cleaned = 0.00166074 Jy ! Component: 2200 - total flux cleaned = 0.00171359 Jy ! Component: 2250 - total flux cleaned = 0.00176587 Jy ! Component: 2300 - total flux cleaned = 0.00171383 Jy ! Component: 2350 - total flux cleaned = 0.00169663 Jy ! Component: 2400 - total flux cleaned = 0.00171391 Jy ! Component: 2450 - total flux cleaned = 0.00179899 Jy ! Component: 2500 - total flux cleaned = 0.00176518 Jy ! Component: 2550 - total flux cleaned = 0.00179886 Jy ! Component: 2600 - total flux cleaned = 0.00178212 Jy ! Component: 2650 - total flux cleaned = 0.0017488 Jy ! Component: 2700 - total flux cleaned = 0.00179842 Jy ! Component: 2750 - total flux cleaned = 0.00176542 Jy ! Component: 2800 - total flux cleaned = 0.00178174 Jy ! Component: 2850 - total flux cleaned = 0.00178163 Jy ! Component: 2900 - total flux cleaned = 0.00174912 Jy ! Component: 2950 - total flux cleaned = 0.00181394 Jy ! Component: 3000 - total flux cleaned = 0.00179771 Jy ! Component: 3050 - total flux cleaned = 0.00181372 Jy ! Component: 3100 - total flux cleaned = 0.00181376 Jy ! Component: 3150 - total flux cleaned = 0.00182961 Jy ! Component: 3200 - total flux cleaned = 0.00186142 Jy ! Component: 3250 - total flux cleaned = 0.00187718 Jy ! Component: 3300 - total flux cleaned = 0.00184562 Jy ! Component: 3350 - total flux cleaned = 0.00186127 Jy ! Component: 3400 - total flux cleaned = 0.00187695 Jy ! Component: 3450 - total flux cleaned = 0.00192407 Jy ! Component: 3500 - total flux cleaned = 0.00193977 Jy ! Component: 3550 - total flux cleaned = 0.00198654 Jy ! Component: 3600 - total flux cleaned = 0.00201772 Jy ! Component: 3650 - total flux cleaned = 0.00204882 Jy ! Component: 3700 - total flux cleaned = 0.00209538 Jy ! Component: 3750 - total flux cleaned = 0.00211091 Jy ! Component: 3800 - total flux cleaned = 0.00215742 Jy ! Component: 3850 - total flux cleaned = 0.00220399 Jy ! Component: 3900 - total flux cleaned = 0.00220405 Jy ! Component: 3950 - total flux cleaned = 0.00228155 Jy ! Component: 4000 - total flux cleaned = 0.00231254 Jy ! Component: 4050 - total flux cleaned = 0.00237454 Jy ! Total flux subtracted in 4096 components = 0.00242103 Jy ! Clean residual min=-0.000891 max=0.000930 Jy/beam ! Clean residual mean=0.000002 rms=0.000269 Jy/beam ! Combined flux in latest and established models = 0.0903754 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 368 components and 0.0903754 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J2310+8857_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.449 x 3.8 at -7.38 degrees (North through East) ! Clean map min=-0.0019324 max=0.060747 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J2310+8857_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0607466 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000259335 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.28074 1.28074 2.56148 5.12295 10.2459 20.4918 40.9836 81.9672 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J2310+8857_X_uvs.log closed on Wed Sep 25 00:08:25 2013