! Started logfile: /g0/scr/pima/npcsb_uvs/J2310+8857_S_uvs.log on Wed Sep 25 00:13:59 2013 obs /g0/scr/pima/npcsb_uvs/J2310+8857_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J2310+8857_S_uva.fits ! AN table 1: 46 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.956522 visibilities/baseline/integration-bin. ! Found source: J2310+8857 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23693e+09 8e+06 1 8e+06 ! 02 2 2.26693e+09 8e+06 1 8e+06 ! 03 3 2.35693e+09 8e+06 1 8e+06 ! 04 4 2.37693e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 6336 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J2310+8857_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.987641Jy sigma=1.912044 ! Fit after self-cal, rms=0.871765Jy sigma=1.696359 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.48 mas, bmaj=9.496 mas, bpa=12.62 degrees ! Estimated noise=10.8343 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0858574 Jy ! Component: 100 - total flux cleaned = 0.112625 Jy ! Total flux subtracted in 100 components = 0.112625 Jy ! Clean residual min=-0.010756 max=0.017760 Jy/beam ! Clean residual mean=-0.000029 rms=0.003139 Jy/beam ! Combined flux in latest and established models = 0.112625 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.112625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172042Jy sigma=0.200049 ! Fit after self-cal, rms=0.171849Jy sigma=0.199705 ! Inverting map ! Added new window around map position (-4, -5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187514 Jy ! Component: 100 - total flux cleaned = 0.0293116 Jy ! Total flux subtracted in 100 components = 0.0293116 Jy ! Clean residual min=-0.009101 max=0.011541 Jy/beam ! Clean residual mean=-0.000014 rms=0.002445 Jy/beam ! Combined flux in latest and established models = 0.141936 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 20 components and 0.141936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166198Jy sigma=0.188602 ! Fit after self-cal, rms=0.165844Jy sigma=0.187882 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.501 mas, bmaj=10.58 mas, bpa=11.62 degrees ! Estimated noise=4.81465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204462 Jy ! Component: 100 - total flux cleaned = 0.0285423 Jy ! Component: 150 - total flux cleaned = 0.0308394 Jy ! Component: 200 - total flux cleaned = 0.0314991 Jy ! Total flux subtracted in 200 components = 0.0314991 Jy ! Clean residual min=-0.008237 max=0.011478 Jy/beam ! Clean residual mean=0.000009 rms=0.002262 Jy/beam ! Combined flux in latest and established models = 0.173436 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 46 components and 0.173435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160369Jy sigma=0.182643 ! Fit after self-cal, rms=0.160105Jy sigma=0.182112 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.95 HN 0.95 KP 0.96 ! LA 1.08 MK 0.89 NL 1.25 OV 1.00 ! PT 1.08 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 1.04 KP 0.92 ! LA 0.98 MK 0.88 NL 1.31 OV 0.98 ! PT 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.27 FD 1.03 HN 0.95 KP 0.98 ! LA 0.81 MK 1.01 NL 1.43 OV 1.07 ! PT 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 1.05 HN 0.98 KP 0.89 ! LA 0.74 MK 1.13 NL 1.19 OV 0.89 ! PT 1.00 ! ! ! Fit before self-cal, rms=0.160105Jy sigma=0.182112 ! Fit after self-cal, rms=0.099063Jy sigma=0.171281 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=10.45 mas, bpa=11.94 degrees ! Estimated noise=4.80361 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (42.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00627464 Jy ! Component: 100 - total flux cleaned = 0.00946793 Jy ! Component: 150 - total flux cleaned = 0.0111764 Jy ! Component: 200 - total flux cleaned = 0.0118156 Jy ! Total flux subtracted in 200 components = 0.0118156 Jy ! Clean residual min=-0.003825 max=0.002743 Jy/beam ! Clean residual mean=-0.000012 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.185251 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 91 components and 0.185251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098671Jy sigma=0.170418 ! Fit after self-cal, rms=0.098506Jy sigma=0.169996 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098506Jy sigma=0.169996 ! Fit after self-cal, rms=0.098040Jy sigma=0.169937 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=10.43 mas, bpa=11.91 degrees ! Estimated noise=4.766 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231242 Jy ! Component: 100 - total flux cleaned = 0.00301663 Jy ! Component: 150 - total flux cleaned = 0.00357512 Jy ! Component: 200 - total flux cleaned = 0.00390891 Jy ! Total flux subtracted in 200 components = 0.00390891 Jy ! Clean residual min=-0.003215 max=0.002522 Jy/beam ! Clean residual mean=-0.000010 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.18916 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 110 components and 0.18916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097960Jy sigma=0.169764 ! Fit after self-cal, rms=0.097971Jy sigma=0.169757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000391305 Jy ! Component: 100 - total flux cleaned = 0.000642287 Jy ! Component: 150 - total flux cleaned = 0.00087089 Jy ! Component: 200 - total flux cleaned = 0.00108184 Jy ! Total flux subtracted in 200 components = 0.00108184 Jy ! Clean residual min=-0.003062 max=0.002534 Jy/beam ! Clean residual mean=-0.000011 rms=0.000681 Jy/beam ! Combined flux in latest and established models = 0.190242 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 129 components and 0.190242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097933Jy sigma=0.169680 ! Fit after self-cal, rms=0.097938Jy sigma=0.169678 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097938Jy sigma=0.169678 ! Fit after self-cal, rms=0.097974Jy sigma=0.169664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=10.43 mas, bpa=11.98 degrees ! Estimated noise=4.75729 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000820618 Jy ! Component: 100 - total flux cleaned = 0.00130179 Jy ! Component: 150 - total flux cleaned = 0.00149874 Jy ! Component: 200 - total flux cleaned = 0.00164155 Jy ! Total flux subtracted in 200 components = 0.00164155 Jy ! Clean residual min=-0.003064 max=0.002432 Jy/beam ! Clean residual mean=-0.000009 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.191883 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 146 components and 0.191883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097943Jy sigma=0.169604 ! Fit after self-cal, rms=0.097951Jy sigma=0.169602 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.56374e-05 Jy ! Component: 100 - total flux cleaned = 0.000230383 Jy ! Component: 150 - total flux cleaned = 0.000291348 Jy ! Component: 200 - total flux cleaned = 0.00034993 Jy ! Total flux subtracted in 200 components = 0.00034993 Jy ! Clean residual min=-0.003002 max=0.002452 Jy/beam ! Clean residual mean=-0.000010 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.192233 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 158 components and 0.192233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097935Jy sigma=0.169567 ! Fit after self-cal, rms=0.097937Jy sigma=0.169567 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097937Jy sigma=0.169567 ! Fit after self-cal, rms=0.098131Jy sigma=0.169560 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.938 mas, bmaj=13.27 mas, bpa=7.164 degrees ! Estimated noise=5.67048 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00088403 Jy ! Component: 100 - total flux cleaned = 0.001303 Jy ! Component: 150 - total flux cleaned = 0.00149058 Jy ! Component: 200 - total flux cleaned = 0.00156286 Jy ! Total flux subtracted in 200 components = 0.00156286 Jy ! Clean residual min=-0.002580 max=0.002050 Jy/beam ! Clean residual mean=-0.000013 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.193796 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 169 components and 0.193796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098120Jy sigma=0.169553 ! Fit after self-cal, rms=0.098121Jy sigma=0.169551 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026795 Jy ! Component: 100 - total flux cleaned = 0.000310909 Jy ! Component: 150 - total flux cleaned = 0.000371878 Jy ! Component: 200 - total flux cleaned = 0.000448445 Jy ! Total flux subtracted in 200 components = 0.000448445 Jy ! Clean residual min=-0.002517 max=0.002024 Jy/beam ! Clean residual mean=-0.000013 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.194245 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 175 components and 0.194245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098119Jy sigma=0.169549 ! Fit after self-cal, rms=0.098117Jy sigma=0.169548 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=10.42 mas, bpa=12.04 degrees ! Estimated noise=4.75623 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.489 x 10.42 at 12.04 degrees (North through East) ! Clean map min=-0.0035117 max=0.11883 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.472 mas, bmaj=9.33 mas, bpa=12.62 degrees ! Estimated noise=10.6177 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0841248 Jy ! Component: 100 - total flux cleaned = 0.115081 Jy ! Component: 150 - total flux cleaned = 0.13139 Jy ! Component: 200 - total flux cleaned = 0.14202 Jy ! Total flux subtracted in 200 components = 0.14202 Jy ! Clean residual min=-0.007488 max=0.008112 Jy/beam ! Clean residual mean=-0.000013 rms=0.002048 Jy/beam ! Combined flux in latest and established models = 0.14202 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.14202 Jy ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=10.42 mas, bpa=12.04 degrees ! Estimated noise=4.75623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163425 Jy ! Component: 100 - total flux cleaned = 0.0251063 Jy ! Component: 150 - total flux cleaned = 0.0311067 Jy ! Component: 200 - total flux cleaned = 0.0338291 Jy ! Total flux subtracted in 200 components = 0.0338291 Jy ! Clean residual min=-0.004388 max=0.004068 Jy/beam ! Clean residual mean=-0.000006 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.175849 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 64 components and 0.175849 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.938 mas, bmaj=13.27 mas, bpa=7.164 degrees ! Estimated noise=5.67048 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00560822 Jy ! Component: 100 - total flux cleaned = 0.00956869 Jy ! Component: 150 - total flux cleaned = 0.0121181 Jy ! Component: 200 - total flux cleaned = 0.0134798 Jy ! Total flux subtracted in 200 components = 0.0134798 Jy ! Clean residual min=-0.003606 max=0.002579 Jy/beam ! Clean residual mean=-0.000010 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.189329 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000820493 Jy ! Component: 100 - total flux cleaned = 0.00153273 Jy ! Component: 150 - total flux cleaned = 0.00215423 Jy ! Component: 200 - total flux cleaned = 0.00264761 Jy ! Total flux subtracted in 200 components = 0.00264761 Jy ! Clean residual min=-0.002918 max=0.002335 Jy/beam ! Clean residual mean=-0.000012 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.191976 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 131 components and 0.191976 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=10.42 mas, bpa=12.04 degrees ! Estimated noise=4.75623 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000456363 Jy ! Component: 100 - total flux cleaned = 0.000286392 Jy ! Component: 150 - total flux cleaned = 0.000366147 Jy ! Component: 200 - total flux cleaned = 0.000492431 Jy ! Total flux subtracted in 200 components = 0.000492431 Jy ! Clean residual min=-0.003181 max=0.002775 Jy/beam ! Clean residual mean=-0.000008 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.192469 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 150 components and 0.192469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098226Jy sigma=0.169797 ! Fit after self-cal, rms=0.098182Jy sigma=0.169734 wmodel /g0/scr/pima/npcsb_uvs/J2310+8857_S_map.mod ! Writing 150 model components to file: /g0/scr/pima/npcsb_uvs/J2310+8857_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J2310+8857_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J2310+8857_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J2310+8857_S_map.win ! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J2310+8857_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00073315 Jy ! Component: 100 - total flux cleaned = -0.00138124 Jy ! Component: 150 - total flux cleaned = -0.00168324 Jy ! Component: 200 - total flux cleaned = -0.00188615 Jy ! Component: 250 - total flux cleaned = -0.00212135 Jy ! Component: 300 - total flux cleaned = -0.00231041 Jy ! Component: 350 - total flux cleaned = -0.00245674 Jy ! Component: 400 - total flux cleaned = -0.00259931 Jy ! Component: 450 - total flux cleaned = -0.00259867 Jy ! Component: 500 - total flux cleaned = -0.00256516 Jy ! Component: 550 - total flux cleaned = -0.00263117 Jy ! Component: 600 - total flux cleaned = -0.00259876 Jy ! Component: 650 - total flux cleaned = -0.00259906 Jy ! Component: 700 - total flux cleaned = -0.00259956 Jy ! Component: 750 - total flux cleaned = -0.00260007 Jy ! Component: 800 - total flux cleaned = -0.00262957 Jy ! Component: 850 - total flux cleaned = -0.00262941 Jy ! Component: 900 - total flux cleaned = -0.0026285 Jy ! Component: 950 - total flux cleaned = -0.00248823 Jy ! Component: 1000 - total flux cleaned = -0.00248865 Jy ! Component: 1050 - total flux cleaned = -0.0025432 Jy ! Component: 1100 - total flux cleaned = -0.00248989 Jy ! Component: 1150 - total flux cleaned = -0.00251624 Jy ! Component: 1200 - total flux cleaned = -0.00249064 Jy ! Component: 1250 - total flux cleaned = -0.00243995 Jy ! Component: 1300 - total flux cleaned = -0.00236476 Jy ! Component: 1350 - total flux cleaned = -0.00238943 Jy ! Component: 1400 - total flux cleaned = -0.00234085 Jy ! Component: 1450 - total flux cleaned = -0.00238948 Jy ! Component: 1500 - total flux cleaned = -0.00243712 Jy ! Component: 1550 - total flux cleaned = -0.00250744 Jy ! Component: 1600 - total flux cleaned = -0.002577 Jy ! Component: 1650 - total flux cleaned = -0.00250798 Jy ! Component: 1700 - total flux cleaned = -0.00264529 Jy ! Component: 1750 - total flux cleaned = -0.00271353 Jy ! Component: 1800 - total flux cleaned = -0.00282551 Jy ! Component: 1850 - total flux cleaned = -0.00289203 Jy ! Component: 1900 - total flux cleaned = -0.00295787 Jy ! Component: 1950 - total flux cleaned = -0.00308853 Jy ! Component: 2000 - total flux cleaned = -0.00313185 Jy ! Component: 2050 - total flux cleaned = -0.00328177 Jy ! Component: 2100 - total flux cleaned = -0.00338771 Jy ! Component: 2150 - total flux cleaned = -0.00349266 Jy ! Component: 2200 - total flux cleaned = -0.00357617 Jy ! Component: 2250 - total flux cleaned = -0.00372113 Jy ! Component: 2300 - total flux cleaned = -0.00376203 Jy ! Component: 2350 - total flux cleaned = -0.00388435 Jy ! Component: 2400 - total flux cleaned = -0.0040057 Jy ! Component: 2450 - total flux cleaned = -0.00406571 Jy ! Component: 2500 - total flux cleaned = -0.00412559 Jy ! Component: 2550 - total flux cleaned = -0.00428408 Jy ! Component: 2600 - total flux cleaned = -0.00428407 Jy ! Component: 2650 - total flux cleaned = -0.00436251 Jy ! Component: 2700 - total flux cleaned = -0.00444038 Jy ! Component: 2750 - total flux cleaned = -0.00449827 Jy ! Component: 2800 - total flux cleaned = -0.00453665 Jy ! Component: 2850 - total flux cleaned = -0.00463208 Jy ! Component: 2900 - total flux cleaned = -0.00476482 Jy ! Component: 2950 - total flux cleaned = -0.00487785 Jy ! Component: 3000 - total flux cleaned = -0.00487778 Jy ! Component: 3050 - total flux cleaned = -0.00497132 Jy ! Component: 3100 - total flux cleaned = -0.00508269 Jy ! Component: 3150 - total flux cleaned = -0.00511966 Jy ! Component: 3200 - total flux cleaned = -0.00524848 Jy ! Component: 3250 - total flux cleaned = -0.00537632 Jy ! Component: 3300 - total flux cleaned = -0.00544904 Jy ! Component: 3350 - total flux cleaned = -0.0055758 Jy ! Component: 3400 - total flux cleaned = -0.0055937 Jy ! Component: 3450 - total flux cleaned = -0.00564745 Jy ! Component: 3500 - total flux cleaned = -0.00566528 Jy ! Component: 3550 - total flux cleaned = -0.00571868 Jy ! Component: 3600 - total flux cleaned = -0.00578942 Jy ! Component: 3650 - total flux cleaned = -0.00589499 Jy ! Component: 3700 - total flux cleaned = -0.00594757 Jy ! Component: 3750 - total flux cleaned = -0.00601735 Jy ! Component: 3800 - total flux cleaned = -0.00612166 Jy ! Component: 3850 - total flux cleaned = -0.00615614 Jy ! Component: 3900 - total flux cleaned = -0.00619053 Jy ! Component: 3950 - total flux cleaned = -0.00625913 Jy ! Component: 4000 - total flux cleaned = -0.00634451 Jy ! Component: 4050 - total flux cleaned = -0.00641241 Jy ! Total flux subtracted in 4096 components = -0.0063955 Jy ! Clean residual min=-0.001060 max=0.000916 Jy/beam ! Clean residual mean=0.000005 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.186073 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 425 components and 0.186073 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J2310+8857_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.489 x 10.42 at 12.04 degrees (North through East) ! Clean map min=-0.002447 max=0.11814 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J2310+8857_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.118139 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000310873 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.789422 0.789422 1.57884 3.15769 6.31537 12.6307 25.2615 50.523 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.118 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J2310+8857_S_uvs.log closed on Wed Sep 25 00:14:04 2013