! Started logfile: /g0/scr/pima/npcsb_uvs/J2130+8357_X_uvs.log on Wed Sep 25 00:07:58 2013 obs /g0/scr/pima/npcsb_uvs/J2130+8357_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J2130+8357_X_uva.fits ! AN table 1: 47 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.68026 visibilities/baseline/integration-bin. ! Found source: J2130+8357 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 8e+06 1 8e+06 ! 02 2 8.47993e+09 8e+06 1 8e+06 ! 03 3 8.79493e+09 8e+06 1 8e+06 ! 04 4 8.89993e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4604 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J2130+8357_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.995774Jy sigma=2.204144 ! Fit after self-cal, rms=0.951361Jy sigma=2.108024 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6325 mas, bmaj=2.544 mas, bpa=-8.627 degrees ! Estimated noise=9.70032 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.042247 Jy ! Component: 100 - total flux cleaned = 0.0490632 Jy ! Total flux subtracted in 100 components = 0.0490632 Jy ! Clean residual min=-0.007504 max=0.008386 Jy/beam ! Clean residual mean=-0.000004 rms=0.001855 Jy/beam ! Combined flux in latest and established models = 0.0490632 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0490632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080411Jy sigma=0.166637 ! Fit after self-cal, rms=0.079225Jy sigma=0.163849 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8231 mas, bmaj=2.693 mas, bpa=-8.122 degrees ! Estimated noise=4.79038 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000957918 Jy ! Component: 100 - total flux cleaned = 0.000599057 Jy ! Component: 150 - total flux cleaned = 0.000362949 Jy ! Component: 200 - total flux cleaned = 0.000204809 Jy ! Total flux subtracted in 200 components = 0.000204809 Jy ! Clean residual min=-0.003275 max=0.003554 Jy/beam ! Clean residual mean=-0.000004 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.049268 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 11 components and 0.049268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079069Jy sigma=0.163482 ! Fit after self-cal, rms=0.078957Jy sigma=0.163438 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.05 HN 1.03 KP 1.02 ! MK 1.24 NL 1.00 OV 0.96 PT 1.06 ! SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.09 HN 1.08 KP 0.97 ! MK 0.89 NL 0.95 OV 1.06 PT 1.06 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.02 KP 0.82 ! MK 0.94 NL 0.87 OV 0.90 PT 1.14 ! SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.03 HN 0.78 KP 0.92 ! MK 0.92 NL 0.82 OV 0.89 PT 1.10 ! SC 0.89 ! ! ! Fit before self-cal, rms=0.078957Jy sigma=0.163438 ! Fit after self-cal, rms=0.075707Jy sigma=0.162576 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8167 mas, bmaj=2.69 mas, bpa=-8.468 degrees ! Estimated noise=4.68783 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000521306 Jy ! Component: 100 - total flux cleaned = -0.000650661 Jy ! Component: 150 - total flux cleaned = -0.000801385 Jy ! Component: 200 - total flux cleaned = -0.000932025 Jy ! Total flux subtracted in 200 components = -0.000932025 Jy ! Clean residual min=-0.003146 max=0.003075 Jy/beam ! Clean residual mean=-0.000003 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.048336 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 19 components and 0.048336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075686Jy sigma=0.162568 ! Fit after self-cal, rms=0.075622Jy sigma=0.162243 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075622Jy sigma=0.162243 ! Fit after self-cal, rms=0.075033Jy sigma=0.162176 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8134 mas, bmaj=2.689 mas, bpa=-8.551 degrees ! Estimated noise=4.62656 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000557639 Jy ! Component: 100 - total flux cleaned = -0.000678975 Jy ! Component: 150 - total flux cleaned = -0.000693496 Jy ! Component: 200 - total flux cleaned = -0.000682326 Jy ! Total flux subtracted in 200 components = -0.000682326 Jy ! Clean residual min=-0.002989 max=0.002982 Jy/beam ! Clean residual mean=-0.000003 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.0476537 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 0.0476537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075013Jy sigma=0.162172 ! Fit after self-cal, rms=0.075023Jy sigma=0.162106 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000106073 Jy ! Component: 100 - total flux cleaned = -0.000166459 Jy ! Component: 150 - total flux cleaned = -0.000133877 Jy ! Component: 200 - total flux cleaned = -0.000133713 Jy ! Total flux subtracted in 200 components = -0.000133713 Jy ! Clean residual min=-0.002962 max=0.003013 Jy/beam ! Clean residual mean=-0.000003 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.04752 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.04752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075012Jy sigma=0.162099 ! Fit after self-cal, rms=0.074931Jy sigma=0.161973 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074931Jy sigma=0.161973 ! Fit after self-cal, rms=0.074391Jy sigma=0.161938 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8119 mas, bmaj=2.685 mas, bpa=-8.556 degrees ! Estimated noise=4.59172 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000317098 Jy ! Component: 100 - total flux cleaned = -0.000384313 Jy ! Component: 150 - total flux cleaned = -0.000384232 Jy ! Component: 200 - total flux cleaned = -0.000394724 Jy ! Total flux subtracted in 200 components = -0.000394724 Jy ! Clean residual min=-0.003016 max=0.002912 Jy/beam ! Clean residual mean=-0.000003 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.0471252 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.0471252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074376Jy sigma=0.161931 ! Fit after self-cal, rms=0.074405Jy sigma=0.161909 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.05488e-06 Jy ! Component: 100 - total flux cleaned = -3.81096e-05 Jy ! Component: 150 - total flux cleaned = -2.86081e-05 Jy ! Component: 200 - total flux cleaned = -2.87266e-05 Jy ! Total flux subtracted in 200 components = -2.87266e-05 Jy ! Clean residual min=-0.002954 max=0.002862 Jy/beam ! Clean residual mean=-0.000003 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.0470965 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.0470965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074395Jy sigma=0.161903 ! Fit after self-cal, rms=0.074389Jy sigma=0.161894 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074389Jy sigma=0.161894 ! Fit after self-cal, rms=0.073874Jy sigma=0.161868 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.136 mas, bmaj=3.287 mas, bpa=-0.8968 degrees ! Estimated noise=6.01669 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000366796 Jy ! Component: 100 - total flux cleaned = -0.000287648 Jy ! Component: 150 - total flux cleaned = -0.000207759 Jy ! Component: 200 - total flux cleaned = -0.000194101 Jy ! Total flux subtracted in 200 components = -0.000194101 Jy ! Clean residual min=-0.002918 max=0.003147 Jy/beam ! Clean residual mean=-0.000008 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.0469024 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.0469024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073874Jy sigma=0.161880 ! Fit after self-cal, rms=0.073848Jy sigma=0.161850 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.83054e-05 Jy ! Component: 100 - total flux cleaned = 4.14389e-05 Jy ! Component: 150 - total flux cleaned = 7.60849e-05 Jy ! Component: 200 - total flux cleaned = 9.08427e-05 Jy ! Total flux subtracted in 200 components = 9.08427e-05 Jy ! Clean residual min=-0.002959 max=0.003068 Jy/beam ! Clean residual mean=-0.000007 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.0469933 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 40 components and 0.0469933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073844Jy sigma=0.161854 ! Fit after self-cal, rms=0.073805Jy sigma=0.161794 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8108 mas, bmaj=2.681 mas, bpa=-8.541 degrees ! Estimated noise=4.56139 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8108 x 2.681 at -8.541 degrees (North through East) ! Clean map min=-0.0064896 max=0.05238 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6254 mas, bmaj=2.541 mas, bpa=-8.985 degrees ! Estimated noise=8.97974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0416631 Jy ! Component: 100 - total flux cleaned = 0.0463133 Jy ! Component: 150 - total flux cleaned = 0.0451574 Jy ! Component: 200 - total flux cleaned = 0.0444285 Jy ! Total flux subtracted in 200 components = 0.0444285 Jy ! Clean residual min=-0.006740 max=0.006296 Jy/beam ! Clean residual mean=-0.000001 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.0444285 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0444285 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8108 mas, bmaj=2.681 mas, bpa=-8.541 degrees ! Estimated noise=4.56139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000953007 Jy ! Component: 100 - total flux cleaned = 0.00144285 Jy ! Component: 150 - total flux cleaned = 0.00170135 Jy ! Component: 200 - total flux cleaned = 0.00181738 Jy ! Total flux subtracted in 200 components = 0.00181738 Jy ! Clean residual min=-0.002886 max=0.002808 Jy/beam ! Clean residual mean=-0.000002 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.0462459 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 29 components and 0.0462459 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.136 mas, bmaj=3.287 mas, bpa=-0.8968 degrees ! Estimated noise=6.01669 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000400064 Jy ! Component: 100 - total flux cleaned = 0.000492992 Jy ! Component: 150 - total flux cleaned = 0.000532498 Jy ! Component: 200 - total flux cleaned = 0.000548407 Jy ! Total flux subtracted in 200 components = 0.000548407 Jy ! Clean residual min=-0.002892 max=0.003180 Jy/beam ! Clean residual mean=-0.000005 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.0467943 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.1445e-07 Jy ! Component: 100 - total flux cleaned = 1.25762e-05 Jy ! Component: 150 - total flux cleaned = 2.44669e-05 Jy ! Component: 200 - total flux cleaned = 3.48098e-05 Jy ! Total flux subtracted in 200 components = 3.48098e-05 Jy ! Clean residual min=-0.002916 max=0.003183 Jy/beam ! Clean residual mean=-0.000005 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.0468291 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.0468291 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8108 mas, bmaj=2.681 mas, bpa=-8.541 degrees ! Estimated noise=4.56139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026391 Jy ! Component: 100 - total flux cleaned = 6.18405e-05 Jy ! Component: 150 - total flux cleaned = -9.07459e-05 Jy ! Component: 200 - total flux cleaned = -0.000207109 Jy ! Total flux subtracted in 200 components = -0.000207109 Jy ! Clean residual min=-0.002854 max=0.002812 Jy/beam ! Clean residual mean=-0.000002 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.046622 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.046622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073795Jy sigma=0.161807 ! Fit after self-cal, rms=0.073792Jy sigma=0.161795 wmodel /g0/scr/pima/npcsb_uvs/J2130+8357_X_map.mod ! Writing 52 model components to file: /g0/scr/pima/npcsb_uvs/J2130+8357_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J2130+8357_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J2130+8357_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J2130+8357_X_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J2130+8357_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000538082 Jy ! Component: 100 - total flux cleaned = -0.00103297 Jy ! Component: 150 - total flux cleaned = -0.00145426 Jy ! Component: 200 - total flux cleaned = -0.00158726 Jy ! Component: 250 - total flux cleaned = -0.00175944 Jy ! Component: 300 - total flux cleaned = -0.00196525 Jy ! Component: 350 - total flux cleaned = -0.00208307 Jy ! Component: 400 - total flux cleaned = -0.00216035 Jy ! Component: 450 - total flux cleaned = -0.0023488 Jy ! Component: 500 - total flux cleaned = -0.00231178 Jy ! Component: 550 - total flux cleaned = -0.00234703 Jy ! Component: 600 - total flux cleaned = -0.00231164 Jy ! Component: 650 - total flux cleaned = -0.00227737 Jy ! Component: 700 - total flux cleaned = -0.00234526 Jy ! Component: 750 - total flux cleaned = -0.00237837 Jy ! Component: 800 - total flux cleaned = -0.0024436 Jy ! Component: 850 - total flux cleaned = -0.00241064 Jy ! Component: 900 - total flux cleaned = -0.00237913 Jy ! Component: 950 - total flux cleaned = -0.00237977 Jy ! Component: 1000 - total flux cleaned = -0.00244215 Jy ! Component: 1050 - total flux cleaned = -0.00241192 Jy ! Component: 1100 - total flux cleaned = -0.00241147 Jy ! Component: 1150 - total flux cleaned = -0.00238198 Jy ! Component: 1200 - total flux cleaned = -0.00241084 Jy ! Component: 1250 - total flux cleaned = -0.0023818 Jy ! Component: 1300 - total flux cleaned = -0.00243898 Jy ! Component: 1350 - total flux cleaned = -0.00243861 Jy ! Component: 1400 - total flux cleaned = -0.00252179 Jy ! Component: 1450 - total flux cleaned = -0.00252166 Jy ! Component: 1500 - total flux cleaned = -0.00257596 Jy ! Component: 1550 - total flux cleaned = -0.00257592 Jy ! Component: 1600 - total flux cleaned = -0.00254932 Jy ! Component: 1650 - total flux cleaned = -0.00262899 Jy ! Component: 1700 - total flux cleaned = -0.00260298 Jy ! Component: 1750 - total flux cleaned = -0.00268051 Jy ! Component: 1800 - total flux cleaned = -0.00265512 Jy ! Component: 1850 - total flux cleaned = -0.00273091 Jy ! Component: 1900 - total flux cleaned = -0.00270562 Jy ! Component: 1950 - total flux cleaned = -0.00268028 Jy ! Component: 2000 - total flux cleaned = -0.00268022 Jy ! Component: 2050 - total flux cleaned = -0.00263149 Jy ! Component: 2100 - total flux cleaned = -0.00265561 Jy ! Component: 2150 - total flux cleaned = -0.0026796 Jy ! Component: 2200 - total flux cleaned = -0.0027029 Jy ! Component: 2250 - total flux cleaned = -0.00286642 Jy ! Component: 2300 - total flux cleaned = -0.00277327 Jy ! Component: 2350 - total flux cleaned = -0.00288829 Jy ! Component: 2400 - total flux cleaned = -0.00284257 Jy ! Component: 2450 - total flux cleaned = -0.00279746 Jy ! Component: 2500 - total flux cleaned = -0.00290963 Jy ! Component: 2550 - total flux cleaned = -0.00290948 Jy ! Component: 2600 - total flux cleaned = -0.00288764 Jy ! Component: 2650 - total flux cleaned = -0.00299714 Jy ! Component: 2700 - total flux cleaned = -0.00295351 Jy ! Component: 2750 - total flux cleaned = -0.00303993 Jy ! Component: 2800 - total flux cleaned = -0.0029971 Jy ! Component: 2850 - total flux cleaned = -0.00301868 Jy ! Component: 2900 - total flux cleaned = -0.00303959 Jy ! Component: 2950 - total flux cleaned = -0.00306057 Jy ! Component: 3000 - total flux cleaned = -0.00297734 Jy ! Component: 3050 - total flux cleaned = -0.0030602 Jy ! Component: 3100 - total flux cleaned = -0.00301896 Jy ! Component: 3150 - total flux cleaned = -0.00297815 Jy ! Component: 3200 - total flux cleaned = -0.00299827 Jy ! Component: 3250 - total flux cleaned = -0.0029578 Jy ! Component: 3300 - total flux cleaned = -0.00289739 Jy ! Component: 3350 - total flux cleaned = -0.00281759 Jy ! Component: 3400 - total flux cleaned = -0.00283735 Jy ! Component: 3450 - total flux cleaned = -0.00277811 Jy ! Component: 3500 - total flux cleaned = -0.00275862 Jy ! Component: 3550 - total flux cleaned = -0.00275862 Jy ! Component: 3600 - total flux cleaned = -0.00270028 Jy ! Component: 3650 - total flux cleaned = -0.00258439 Jy ! Component: 3700 - total flux cleaned = -0.00258436 Jy ! Component: 3750 - total flux cleaned = -0.00254609 Jy ! Component: 3800 - total flux cleaned = -0.00250812 Jy ! Component: 3850 - total flux cleaned = -0.00254591 Jy ! Component: 3900 - total flux cleaned = -0.00248933 Jy ! Component: 3950 - total flux cleaned = -0.00247061 Jy ! Component: 4000 - total flux cleaned = -0.00245195 Jy ! Component: 4050 - total flux cleaned = -0.00247043 Jy ! Total flux subtracted in 4096 components = -0.00241507 Jy ! Clean residual min=-0.001037 max=0.001349 Jy/beam ! Clean residual mean=-0.000001 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.0442069 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 329 components and 0.0442069 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J2130+8357_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8108 x 2.681 at -8.541 degrees (North through East) ! Clean map min=-0.0066056 max=0.05191 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J2130+8357_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0519097 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000310599 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.79504 1.79504 3.59007 7.18014 14.3603 28.7206 57.4411 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J2130+8357_X_uvs.log closed on Wed Sep 25 00:08:03 2013