! Started logfile: /g0/scr/pima/npcsb_uvs/J2101+0341_S_uvs.log on Wed Sep 25 00:13:34 2013
obs /g0/scr/pima/npcsb_uvs/J2101+0341_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J2101+0341_S_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.636905 visibilities/baseline/integration-bin.
! Found source: J2101+0341
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1284 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J2101+0341_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.164302Jy  sigma=2.529779
! Fit after  self-cal, rms=0.507324Jy  sigma=1.117499
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.954 mas, bmaj=11.29 mas, bpa=-18.28 degrees
! Estimated noise=12.2068 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.384099 Jy
! Component: 100  -  total flux cleaned = 0.482476 Jy
! Total flux subtracted in 100 components = 0.482476 Jy
! Clean residual min=-0.028776 max=0.050005 Jy/beam
! Clean residual mean=0.000060 rms=0.009348 Jy/beam
! Combined flux in latest and established models = 0.482476 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.482476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.155949Jy  sigma=0.292218
! Fit after  self-cal, rms=0.155856Jy  sigma=0.292086
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.38 mas, bmaj=11.43 mas, bpa=-18.36 degrees
! Estimated noise=9.40807 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0529483 Jy
! Component: 100  -  total flux cleaned = 0.0803781 Jy
! Component: 150  -  total flux cleaned = 0.0913603 Jy
! Component: 200  -  total flux cleaned = 0.0927171 Jy
! Total flux subtracted in 200 components = 0.0927171 Jy
! Clean residual min=-0.022251 max=0.032471 Jy/beam
! Clean residual mean=0.000024 rms=0.006646 Jy/beam
! Combined flux in latest and established models = 0.575193 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 30 components and 0.575193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135532Jy  sigma=0.250180
! Fit after  self-cal, rms=0.135512Jy  sigma=0.250056
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        0.88     KP        0.95     
!   LA        1.07     MK        0.92     NL        1.23     OV        0.96     
!   PT        1.05     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        0.89     KP        0.98     
!   LA        1.03     MK        1.00     NL        1.29     OV        0.98     
!   PT        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.75     FD        1.03     HN        0.89     KP        0.95     
!   LA        0.86     MK        1.09     NL        1.35     OV        1.01     
!   PT        1.07     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        0.90     KP        0.87     
!   LA        0.73     MK        1.13     NL        1.30     OV        0.89     
!   PT        0.94     
! 
! 
! Fit before self-cal, rms=0.135512Jy  sigma=0.250056
! Fit after  self-cal, rms=0.090692Jy  sigma=0.183458
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.449 mas, bmaj=11.3 mas, bpa=-18 degrees
! Estimated noise=9.3864 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00489562 Jy
! Component: 100  -  total flux cleaned = -0.00611207 Jy
! Component: 150  -  total flux cleaned = -0.00666117 Jy
! Component: 200  -  total flux cleaned = -0.00666008 Jy
! Total flux subtracted in 200 components = -0.00666008 Jy
! Clean residual min=-0.007004 max=0.007774 Jy/beam
! Clean residual mean=-0.000017 rms=0.001938 Jy/beam
! Combined flux in latest and established models = 0.568533 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 46 components and 0.568533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090199Jy  sigma=0.182496
! Fit after  self-cal, rms=0.090193Jy  sigma=0.182313
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090193Jy  sigma=0.182313
! Fit after  self-cal, rms=0.090239Jy  sigma=0.182167
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.45 mas, bmaj=11.32 mas, bpa=-18 degrees
! Estimated noise=9.38398 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00323946 Jy
! Component: 100  -  total flux cleaned = -0.00404619 Jy
! Component: 150  -  total flux cleaned = -0.00434303 Jy
! Component: 200  -  total flux cleaned = -0.0044727 Jy
! Total flux subtracted in 200 components = -0.0044727 Jy
! Clean residual min=-0.006539 max=0.007225 Jy/beam
! Clean residual mean=-0.000017 rms=0.001853 Jy/beam
! Combined flux in latest and established models = 0.56406 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 52 components and 0.56406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090050Jy  sigma=0.181833
! Fit after  self-cal, rms=0.090048Jy  sigma=0.181819
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141067 Jy
! Component: 100  -  total flux cleaned = -0.000141628 Jy
! Component: 150  -  total flux cleaned = -0.000143201 Jy
! Component: 200  -  total flux cleaned = -0.000146078 Jy
! Total flux subtracted in 200 components = -0.000146078 Jy
! Clean residual min=-0.006432 max=0.007106 Jy/beam
! Clean residual mean=-0.000017 rms=0.001838 Jy/beam
! Combined flux in latest and established models = 0.563914 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 57 components and 0.563914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089989Jy  sigma=0.181693
! Fit after  self-cal, rms=0.089982Jy  sigma=0.181683
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089982Jy  sigma=0.181683
! Fit after  self-cal, rms=0.090152Jy  sigma=0.181587
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.453 mas, bmaj=11.33 mas, bpa=-17.99 degrees
! Estimated noise=9.39083 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00232071 Jy
! Component: 100  -  total flux cleaned = -0.00294126 Jy
! Component: 150  -  total flux cleaned = -0.00308966 Jy
! Component: 200  -  total flux cleaned = -0.003134 Jy
! Total flux subtracted in 200 components = -0.003134 Jy
! Clean residual min=-0.006367 max=0.006550 Jy/beam
! Clean residual mean=-0.000017 rms=0.001789 Jy/beam
! Combined flux in latest and established models = 0.56078 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 67 components and 0.56078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090060Jy  sigma=0.181444
! Fit after  self-cal, rms=0.090062Jy  sigma=0.181437
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00014806 Jy
! Component: 100  -  total flux cleaned = -0.000106672 Jy
! Component: 150  -  total flux cleaned = -0.000179867 Jy
! Component: 200  -  total flux cleaned = -0.0002144 Jy
! Total flux subtracted in 200 components = -0.0002144 Jy
! Clean residual min=-0.006285 max=0.006496 Jy/beam
! Clean residual mean=-0.000017 rms=0.001781 Jy/beam
! Combined flux in latest and established models = 0.560566 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 71 components and 0.560565 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090031Jy  sigma=0.181377
! Fit after  self-cal, rms=0.090026Jy  sigma=0.181373
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090026Jy  sigma=0.181373
! Fit after  self-cal, rms=0.090181Jy  sigma=0.181323
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.993 mas, bmaj=12.49 mas, bpa=-1.843 degrees
! Estimated noise=11.1547 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00172344 Jy
! Component: 100  -  total flux cleaned = -0.00248846 Jy
! Component: 150  -  total flux cleaned = -0.00269932 Jy
! Component: 200  -  total flux cleaned = -0.00285905 Jy
! Total flux subtracted in 200 components = -0.00285905 Jy
! Clean residual min=-0.006795 max=0.007666 Jy/beam
! Clean residual mean=-0.000030 rms=0.002055 Jy/beam
! Combined flux in latest and established models = 0.557706 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 87 components and 0.557706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090153Jy  sigma=0.181297
! Fit after  self-cal, rms=0.090160Jy  sigma=0.181295
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.25756e-05 Jy
! Component: 100  -  total flux cleaned = -0.000264359 Jy
! Component: 150  -  total flux cleaned = -0.000368808 Jy
! Component: 200  -  total flux cleaned = -0.000490612 Jy
! Total flux subtracted in 200 components = -0.000490612 Jy
! Clean residual min=-0.006824 max=0.007732 Jy/beam
! Clean residual mean=-0.000029 rms=0.002047 Jy/beam
! Combined flux in latest and established models = 0.557216 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 90 components and 0.557216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090158Jy  sigma=0.181281
! Fit after  self-cal, rms=0.090159Jy  sigma=0.181280
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.456 mas, bmaj=11.33 mas, bpa=-17.99 degrees
! Estimated noise=9.39702 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.456 x 11.33 at -17.99 degrees (North through East)
! Clean map  min=-0.0061396  max=0.48976 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.986 mas, bmaj=11.16 mas, bpa=-18.15 degrees
! Estimated noise=12.3332 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.386571 Jy
! Component: 100  -  total flux cleaned = 0.483701 Jy
! Component: 150  -  total flux cleaned = 0.524691 Jy
! Component: 200  -  total flux cleaned = 0.546597 Jy
! Total flux subtracted in 200 components = 0.546597 Jy
! Clean residual min=-0.011100 max=0.013255 Jy/beam
! Clean residual mean=0.000001 rms=0.002832 Jy/beam
! Combined flux in latest and established models = 0.546597 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.546597 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.456 mas, bmaj=11.33 mas, bpa=-17.99 degrees
! Estimated noise=9.39702 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126902 Jy
! Component: 100  -  total flux cleaned = 0.0143125 Jy
! Component: 150  -  total flux cleaned = 0.0143415 Jy
! Component: 200  -  total flux cleaned = 0.0141753 Jy
! Total flux subtracted in 200 components = 0.0141753 Jy
! Clean residual min=-0.007153 max=0.006479 Jy/beam
! Clean residual mean=-0.000018 rms=0.001822 Jy/beam
! Combined flux in latest and established models = 0.560772 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 35 components and 0.560772 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.993 mas, bmaj=12.49 mas, bpa=-1.843 degrees
! Estimated noise=11.1547 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000887927 Jy
! Component: 100  -  total flux cleaned = -0.00132099 Jy
! Component: 150  -  total flux cleaned = -0.00203583 Jy
! Component: 200  -  total flux cleaned = -0.00266089 Jy
! Total flux subtracted in 200 components = -0.00266089 Jy
! Clean residual min=-0.006799 max=0.007051 Jy/beam
! Clean residual mean=-0.000025 rms=0.001978 Jy/beam
! Combined flux in latest and established models = 0.558112 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000614262 Jy
! Component: 100  -  total flux cleaned = -0.0010926 Jy
! Component: 150  -  total flux cleaned = -0.00151743 Jy
! Component: 200  -  total flux cleaned = -0.00176016 Jy
! Total flux subtracted in 200 components = -0.00176016 Jy
! Clean residual min=-0.006797 max=0.007001 Jy/beam
! Clean residual mean=-0.000022 rms=0.001932 Jy/beam
! Combined flux in latest and established models = 0.556351 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 75 components and 0.556351 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.456 mas, bmaj=11.33 mas, bpa=-17.99 degrees
! Estimated noise=9.39702 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000958763 Jy
! Component: 100  -  total flux cleaned = 0.000956417 Jy
! Component: 150  -  total flux cleaned = 0.000955616 Jy
! Component: 200  -  total flux cleaned = 0.000809931 Jy
! Total flux subtracted in 200 components = 0.000809931 Jy
! Clean residual min=-0.005971 max=0.006164 Jy/beam
! Clean residual mean=-0.000013 rms=0.001674 Jy/beam
! Combined flux in latest and established models = 0.557161 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 95 components and 0.557161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089923Jy  sigma=0.180959
! Fit after  self-cal, rms=0.089879Jy  sigma=0.180889
wmodel /g0/scr/pima/npcsb_uvs/J2101+0341_S_map.mod
! Writing 95 model components to file: /g0/scr/pima/npcsb_uvs/J2101+0341_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J2101+0341_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J2101+0341_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J2101+0341_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J2101+0341_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196786 Jy
! Component: 100  -  total flux cleaned = 0.00351748 Jy
! Component: 150  -  total flux cleaned = 0.00390493 Jy
! Component: 200  -  total flux cleaned = 0.00381351 Jy
! Component: 250  -  total flux cleaned = 0.0037292 Jy
! Component: 300  -  total flux cleaned = 0.00364302 Jy
! Component: 350  -  total flux cleaned = 0.00340576 Jy
! Component: 400  -  total flux cleaned = 0.00325449 Jy
! Component: 450  -  total flux cleaned = 0.00325557 Jy
! Component: 500  -  total flux cleaned = 0.00318436 Jy
! Component: 550  -  total flux cleaned = 0.00298101 Jy
! Component: 600  -  total flux cleaned = 0.00311387 Jy
! Component: 650  -  total flux cleaned = 0.00298661 Jy
! Component: 700  -  total flux cleaned = 0.00311046 Jy
! Component: 750  -  total flux cleaned = 0.00322939 Jy
! Component: 800  -  total flux cleaned = 0.00340374 Jy
! Component: 850  -  total flux cleaned = 0.00345999 Jy
! Component: 900  -  total flux cleaned = 0.00351515 Jy
! Component: 950  -  total flux cleaned = 0.00362485 Jy
! Component: 1000  -  total flux cleaned = 0.0037856 Jy
! Component: 1050  -  total flux cleaned = 0.00368082 Jy
! Component: 1100  -  total flux cleaned = 0.00373396 Jy
! Component: 1150  -  total flux cleaned = 0.00373568 Jy
! Component: 1200  -  total flux cleaned = 0.0038331 Jy
! Component: 1250  -  total flux cleaned = 0.00378418 Jy
! Component: 1300  -  total flux cleaned = 0.00359505 Jy
! Component: 1350  -  total flux cleaned = 0.00364249 Jy
! Component: 1400  -  total flux cleaned = 0.00364268 Jy
! Component: 1450  -  total flux cleaned = 0.0036866 Jy
! Component: 1500  -  total flux cleaned = 0.00372982 Jy
! Component: 1550  -  total flux cleaned = 0.00351245 Jy
! Component: 1600  -  total flux cleaned = 0.00347083 Jy
! Component: 1650  -  total flux cleaned = 0.00347097 Jy
! Component: 1700  -  total flux cleaned = 0.00355359 Jy
! Component: 1750  -  total flux cleaned = 0.00347247 Jy
! Component: 1800  -  total flux cleaned = 0.0035122 Jy
! Component: 1850  -  total flux cleaned = 0.00343319 Jy
! Component: 1900  -  total flux cleaned = 0.00351134 Jy
! Component: 1950  -  total flux cleaned = 0.00335803 Jy
! Component: 2000  -  total flux cleaned = 0.00335786 Jy
! Component: 2050  -  total flux cleaned = 0.00335729 Jy
! Component: 2100  -  total flux cleaned = 0.00328324 Jy
! Component: 2150  -  total flux cleaned = 0.00328339 Jy
! Component: 2200  -  total flux cleaned = 0.00321252 Jy
! Component: 2250  -  total flux cleaned = 0.00321278 Jy
! Component: 2300  -  total flux cleaned = 0.00331605 Jy
! Component: 2350  -  total flux cleaned = 0.00321333 Jy
! Component: 2400  -  total flux cleaned = 0.00317973 Jy
! Component: 2450  -  total flux cleaned = 0.00314639 Jy
! Component: 2500  -  total flux cleaned = 0.0031462 Jy
! Component: 2550  -  total flux cleaned = 0.00317857 Jy
! Component: 2600  -  total flux cleaned = 0.00314617 Jy
! Component: 2650  -  total flux cleaned = 0.00317818 Jy
! Component: 2700  -  total flux cleaned = 0.00333532 Jy
! Component: 2750  -  total flux cleaned = 0.00336621 Jy
! Component: 2800  -  total flux cleaned = 0.00339677 Jy
! Component: 2850  -  total flux cleaned = 0.00333586 Jy
! Component: 2900  -  total flux cleaned = 0.0034566 Jy
! Component: 2950  -  total flux cleaned = 0.00345621 Jy
! Component: 3000  -  total flux cleaned = 0.0034853 Jy
! Component: 3050  -  total flux cleaned = 0.00360232 Jy
! Component: 3100  -  total flux cleaned = 0.00357366 Jy
! Component: 3150  -  total flux cleaned = 0.00371663 Jy
! Component: 3200  -  total flux cleaned = 0.00374503 Jy
! Component: 3250  -  total flux cleaned = 0.00377282 Jy
! Component: 3300  -  total flux cleaned = 0.00382822 Jy
! Component: 3350  -  total flux cleaned = 0.00393865 Jy
! Component: 3400  -  total flux cleaned = 0.0038019 Jy
! Component: 3450  -  total flux cleaned = 0.00388358 Jy
! Component: 3500  -  total flux cleaned = 0.00393758 Jy
! Component: 3550  -  total flux cleaned = 0.00401752 Jy
! Component: 3600  -  total flux cleaned = 0.00407059 Jy
! Component: 3650  -  total flux cleaned = 0.0041754 Jy
! Component: 3700  -  total flux cleaned = 0.00414942 Jy
! Component: 3750  -  total flux cleaned = 0.00396857 Jy
! Component: 3800  -  total flux cleaned = 0.00391723 Jy
! Component: 3850  -  total flux cleaned = 0.0038155 Jy
! Component: 3900  -  total flux cleaned = 0.0037905 Jy
! Component: 3950  -  total flux cleaned = 0.00371509 Jy
! Component: 4000  -  total flux cleaned = 0.00363998 Jy
! Component: 4050  -  total flux cleaned = 0.00354028 Jy
! Total flux subtracted in 4096 components = 0.00341672 Jy
! Clean residual min=-0.001348 max=0.001495 Jy/beam
! Clean residual mean=-0.000003 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.560578 Jy
keep
! Adding 291 model components to the UV plane model.
! The established model now contains 386 components and 0.560578 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J2101+0341_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.456 x 11.33 at -17.99 degrees (North through East)
! Clean map  min=-0.0038711  max=0.49042 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J2101+0341_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.490419 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000434245 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.265637 0.265637 0.531275 1.06255 2.1251 4.2502 8.50039 17.0008 34.0016 68.0031
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0013 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.49 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J2101+0341_S_uvs.log closed on Wed Sep 25 00:13:38 2013