! Started logfile: /g0/scr/pima/npcsb_uvs/J2007+7942_S_uvs.log on Wed Sep 25 00:13:25 2013
obs /g0/scr/pima/npcsb_uvs/J2007+7942_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J2007+7942_S_uva.fits
! AN table 1: 45 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J2007+7942
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2700 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J2007+7942_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.009533Jy  sigma=2.330313
! Fit after  self-cal, rms=0.944738Jy  sigma=2.184303
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.821 mas, bmaj=21.26 mas, bpa=46.88 degrees
! Estimated noise=9.01622 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.041498 Jy
! Component: 100  -  total flux cleaned = 0.0492133 Jy
! Total flux subtracted in 100 components = 0.0492133 Jy
! Clean residual min=-0.004660 max=0.004718 Jy/beam
! Clean residual mean=0.000030 rms=0.001691 Jy/beam
! Combined flux in latest and established models = 0.0492133 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0492133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080555Jy  sigma=0.167482
! Fit after  self-cal, rms=0.079213Jy  sigma=0.164314
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.004 mas, bmaj=22.4 mas, bpa=41.78 degrees
! Estimated noise=6.04104 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00818992 Jy
! Component: 100  -  total flux cleaned = 0.00799014 Jy
! Component: 150  -  total flux cleaned = 0.00765034 Jy
! Component: 200  -  total flux cleaned = 0.00753053 Jy
! Total flux subtracted in 200 components = 0.00753053 Jy
! Clean residual min=-0.002065 max=0.002068 Jy/beam
! Clean residual mean=0.000036 rms=0.000849 Jy/beam
! Combined flux in latest and established models = 0.0567439 Jy
! Performing phase self-cal
! Adding 100 model components to the UV plane model.
! The established model now contains 113 components and 0.0567439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077642Jy  sigma=0.161405
! Fit after  self-cal, rms=0.077410Jy  sigma=0.161088
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     KP        1.04     LA        1.06     
!   OV        0.95     PT        1.09     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.93     KP        0.94     LA        0.97     
!   OV        0.98     PT        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        1.03     KP        1.03     LA        0.86     
!   OV        1.20     PT        0.89     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     KP        0.87     LA        0.73     
!   OV        0.89     PT        0.88     
! 
! 
! Fit before self-cal, rms=0.077410Jy  sigma=0.161088
! Fit after  self-cal, rms=0.069661Jy  sigma=0.159767
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.158 mas, bmaj=22.51 mas, bpa=41 degrees
! Estimated noise=5.78636 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166167 Jy
! Component: 100  -  total flux cleaned = 0.00262717 Jy
! Component: 150  -  total flux cleaned = 0.00335451 Jy
! Component: 200  -  total flux cleaned = 0.00366758 Jy
! Total flux subtracted in 200 components = 0.00366758 Jy
! Clean residual min=-0.000964 max=0.000965 Jy/beam
! Clean residual mean=0.000009 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.0604115 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 171 components and 0.0604115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069461Jy  sigma=0.159336
! Fit after  self-cal, rms=0.069380Jy  sigma=0.159125
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069380Jy  sigma=0.159125
! Fit after  self-cal, rms=0.069290Jy  sigma=0.159075
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.214 mas, bmaj=22.51 mas, bpa=40.68 degrees
! Estimated noise=5.76823 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000936443 Jy
! Component: 100  -  total flux cleaned = 0.00180029 Jy
! Component: 150  -  total flux cleaned = 0.00249193 Jy
! Component: 200  -  total flux cleaned = 0.0029744 Jy
! Total flux subtracted in 200 components = 0.0029744 Jy
! Clean residual min=-0.000778 max=0.000769 Jy/beam
! Clean residual mean=0.000004 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.0633859 Jy
selfcal
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 229 components and 0.0633859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069195Jy  sigma=0.158872
! Fit after  self-cal, rms=0.069210Jy  sigma=0.158834
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.28391e-05 Jy
! Component: 100  -  total flux cleaned = 0.000374311 Jy
! Component: 150  -  total flux cleaned = 0.000541839 Jy
! Component: 200  -  total flux cleaned = 0.000661362 Jy
! Total flux subtracted in 200 components = 0.000661362 Jy
! Clean residual min=-0.000640 max=0.000640 Jy/beam
! Clean residual mean=0.000004 rms=0.000242 Jy/beam
! Combined flux in latest and established models = 0.0640473 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 270 components and 0.0640472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069156Jy  sigma=0.158708
! Fit after  self-cal, rms=0.069152Jy  sigma=0.158693
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069152Jy  sigma=0.158693
! Fit after  self-cal, rms=0.068901Jy  sigma=0.158650
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.225 mas, bmaj=22.48 mas, bpa=40.55 degrees
! Estimated noise=5.73162 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000580518 Jy
! Component: 100  -  total flux cleaned = 0.00111583 Jy
! Component: 150  -  total flux cleaned = 0.00130271 Jy
! Component: 200  -  total flux cleaned = 0.00137356 Jy
! Total flux subtracted in 200 components = 0.00137356 Jy
! Clean residual min=-0.000572 max=0.000576 Jy/beam
! Clean residual mean=0.000002 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.0654208 Jy
selfcal
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 312 components and 0.0654208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068856Jy  sigma=0.158560
! Fit after  self-cal, rms=0.068871Jy  sigma=0.158547
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00021508 Jy
! Component: 100  -  total flux cleaned = 0.000389383 Jy
! Component: 150  -  total flux cleaned = 0.000420613 Jy
! Component: 200  -  total flux cleaned = 0.000357754 Jy
! Total flux subtracted in 200 components = 0.000357754 Jy
! Clean residual min=-0.000503 max=0.000505 Jy/beam
! Clean residual mean=0.000002 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.0657786 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 348 components and 0.0657785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068841Jy  sigma=0.158478
! Fit after  self-cal, rms=0.068837Jy  sigma=0.158471
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068837Jy  sigma=0.158471
! Fit after  self-cal, rms=0.068635Jy  sigma=0.158434
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.24 mas, bmaj=22.59 mas, bpa=38.56 degrees
! Estimated noise=5.79846 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000223167 Jy
! Component: 100  -  total flux cleaned = 0.000472637 Jy
! Component: 150  -  total flux cleaned = 0.000558747 Jy
! Component: 200  -  total flux cleaned = 0.000642293 Jy
! Total flux subtracted in 200 components = 0.000642293 Jy
! Clean residual min=-0.000456 max=0.000454 Jy/beam
! Clean residual mean=0.000001 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.0664208 Jy
selfcal
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 390 components and 0.0664208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068606Jy  sigma=0.158379
! Fit after  self-cal, rms=0.068617Jy  sigma=0.158372
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000335661 Jy
! Component: 100  -  total flux cleaned = 0.000499519 Jy
! Component: 150  -  total flux cleaned = 0.00062964 Jy
! Component: 200  -  total flux cleaned = 0.000781147 Jy
! Total flux subtracted in 200 components = 0.000781147 Jy
! Clean residual min=-0.000419 max=0.000414 Jy/beam
! Clean residual mean=-0.000000 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.067202 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 415 components and 0.067202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068597Jy  sigma=0.158327
! Fit after  self-cal, rms=0.068595Jy  sigma=0.158324
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.231 mas, bmaj=22.44 mas, bpa=40.45 degrees
! Estimated noise=5.70096 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.231 x 22.44 at 40.45 degrees (North through East)
! Clean map  min=-0.0029912  max=0.052845 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.058 mas, bmaj=20.84 mas, bpa=45.77 degrees
! Estimated noise=8.74114 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0412404 Jy
! Component: 100  -  total flux cleaned = 0.0425059 Jy
! Component: 150  -  total flux cleaned = 0.0429106 Jy
! Component: 200  -  total flux cleaned = 0.0437675 Jy
! Total flux subtracted in 200 components = 0.0437675 Jy
! Clean residual min=-0.003263 max=0.003298 Jy/beam
! Clean residual mean=0.000026 rms=0.001219 Jy/beam
! Combined flux in latest and established models = 0.0437676 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 65 model components to the UV plane model.
! The established model now contains 65 components and 0.0437676 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.231 mas, bmaj=22.44 mas, bpa=40.45 degrees
! Estimated noise=5.70096 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.73665e-05 Jy
! Component: 100  -  total flux cleaned = 5.74552e-05 Jy
! Component: 150  -  total flux cleaned = -0.000196222 Jy
! Component: 200  -  total flux cleaned = -0.000845242 Jy
! Total flux subtracted in 200 components = -0.000845242 Jy
! Clean residual min=-0.001636 max=0.001629 Jy/beam
! Clean residual mean=0.000016 rms=0.000650 Jy/beam
! Combined flux in latest and established models = 0.0429223 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 131 components and 0.0429223 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.24 mas, bmaj=22.59 mas, bpa=38.56 degrees
! Estimated noise=5.79846 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000130226 Jy
! Component: 100  -  total flux cleaned = -2.29728e-05 Jy
! Component: 150  -  total flux cleaned = -0.000233626 Jy
! Component: 200  -  total flux cleaned = -0.000641629 Jy
! Total flux subtracted in 200 components = -0.000641629 Jy
! Clean residual min=-0.000916 max=0.000921 Jy/beam
! Clean residual mean=0.000009 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.0422807 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000152563 Jy
! Component: 100  -  total flux cleaned = -0.000250925 Jy
! Component: 150  -  total flux cleaned = -0.000207159 Jy
! Component: 200  -  total flux cleaned = -8.05302e-05 Jy
! Total flux subtracted in 200 components = -8.05302e-05 Jy
! Clean residual min=-0.000675 max=0.000678 Jy/beam
! Clean residual mean=0.000005 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.0422002 Jy
! Adding 122 model components to the UV plane model.
! The established model now contains 243 components and 0.0422002 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.231 mas, bmaj=22.44 mas, bpa=40.45 degrees
! Estimated noise=5.70096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.55327e-05 Jy
! Component: 100  -  total flux cleaned = 0.000197813 Jy
! Component: 150  -  total flux cleaned = 0.000432744 Jy
! Component: 200  -  total flux cleaned = 0.000688618 Jy
! Total flux subtracted in 200 components = 0.000688618 Jy
! Clean residual min=-0.000519 max=0.000522 Jy/beam
! Clean residual mean=0.000001 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.0428888 Jy
selfcal
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 300 components and 0.0428888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068638Jy  sigma=0.158455
! Fit after  self-cal, rms=0.068641Jy  sigma=0.158432
wmodel /g0/scr/pima/npcsb_uvs/J2007+7942_S_map.mod
! Writing 300 model components to file: /g0/scr/pima/npcsb_uvs/J2007+7942_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J2007+7942_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J2007+7942_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J2007+7942_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsb_uvs/J2007+7942_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.231 x 22.44 at 40.45 degrees (North through East)
! Clean map  min=-0.0034506  max=0.047174 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J2007+7942_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0471741 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000194163 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.23476 1.23476 2.46952 4.93905 9.87809 19.7562 39.5124 79.0248
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.047 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J2007+7942_S_uvs.log closed on Wed Sep 25 00:13:28 2013