! Started logfile: /g0/scr/pima/npcsb_uvs/J1909+7813_S_uvs.log on Wed Sep 25 00:13:20 2013
obs /g0/scr/pima/npcsb_uvs/J1909+7813_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1909+7813_S_uva.fits
! AN table 1: 47 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.844563 visibilities/baseline/integration-bin.
! Found source: J1909+7813
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 5716 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1909+7813_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013294Jy  sigma=2.122666
! Fit after  self-cal, rms=0.888239Jy  sigma=1.860018
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.72 mas, bmaj=8.933 mas, bpa=0.6557 degrees
! Estimated noise=9.37099 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0698684 Jy
! Component: 100  -  total flux cleaned = 0.0991777 Jy
! Total flux subtracted in 100 components = 0.0991777 Jy
! Clean residual min=-0.011183 max=0.016256 Jy/beam
! Clean residual mean=-0.000031 rms=0.003593 Jy/beam
! Combined flux in latest and established models = 0.0991777 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0991777 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116284Jy  sigma=0.227202
! Fit after  self-cal, rms=0.115668Jy  sigma=0.226452
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.493 mas, bmaj=9.685 mas, bpa=-0.1523 degrees
! Estimated noise=4.57361 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0428746 Jy
! Component: 100  -  total flux cleaned = 0.0671702 Jy
! Component: 150  -  total flux cleaned = 0.0828233 Jy
! Component: 200  -  total flux cleaned = 0.0929572 Jy
! Total flux subtracted in 200 components = 0.0929572 Jy
! Clean residual min=-0.010985 max=0.015171 Jy/beam
! Clean residual mean=-0.000047 rms=0.003978 Jy/beam
! Combined flux in latest and established models = 0.192135 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 45 components and 0.192135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097138Jy  sigma=0.186989
! Fit after  self-cal, rms=0.096566Jy  sigma=0.186338
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        1.18     KP        0.86     
!   LA        1.11     MK        1.23     OV        1.08     PT        0.91     
!   SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.08     HN        1.09     KP        0.83     
!   LA        1.02     MK        1.20     OV        1.11     PT        0.87     
!   SC        0.79     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.08     HN        1.30     KP        0.84     
!   LA        0.85     MK        1.38     OV        1.09     PT        1.07     
!   SC        0.85     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.11     HN        1.14     KP        0.78     
!   LA        0.73     MK        1.34     OV        0.93     PT        0.90     
!   SC        0.84     
! 
! 
! Fit before self-cal, rms=0.096566Jy  sigma=0.186338
! Fit after  self-cal, rms=0.096425Jy  sigma=0.179636
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.628 mas, bmaj=9.893 mas, bpa=-0.423 degrees
! Estimated noise=4.63347 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00019882 Jy
! Component: 100  -  total flux cleaned = -8.7224e-05 Jy
! Component: 150  -  total flux cleaned = 5.50696e-05 Jy
! Component: 200  -  total flux cleaned = 0.000142116 Jy
! Total flux subtracted in 200 components = 0.000142116 Jy
! Clean residual min=-0.009544 max=0.013109 Jy/beam
! Clean residual mean=-0.000086 rms=0.003312 Jy/beam
! Combined flux in latest and established models = 0.192277 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 52 components and 0.192277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096350Jy  sigma=0.179546
! Fit after  self-cal, rms=0.096522Jy  sigma=0.179321
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096522Jy  sigma=0.179321
! Fit after  self-cal, rms=0.098178Jy  sigma=0.179299
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.629 mas, bmaj=9.935 mas, bpa=-0.357 degrees
! Estimated noise=4.664 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000116531 Jy
! Component: 100  -  total flux cleaned = -1.87245e-05 Jy
! Component: 150  -  total flux cleaned = 0.000113465 Jy
! Component: 200  -  total flux cleaned = 0.00019402 Jy
! Total flux subtracted in 200 components = 0.00019402 Jy
! Clean residual min=-0.009385 max=0.012979 Jy/beam
! Clean residual mean=-0.000087 rms=0.003315 Jy/beam
! Combined flux in latest and established models = 0.192471 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 55 components and 0.192471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098120Jy  sigma=0.179231
! Fit after  self-cal, rms=0.098166Jy  sigma=0.179217
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110313 Jy
! Component: 100  -  total flux cleaned = -3.06914e-05 Jy
! Component: 150  -  total flux cleaned = 4.34705e-05 Jy
! Component: 200  -  total flux cleaned = 0.000112906 Jy
! Total flux subtracted in 200 components = 0.000112906 Jy
! Clean residual min=-0.009352 max=0.013087 Jy/beam
! Clean residual mean=-0.000087 rms=0.003310 Jy/beam
! Combined flux in latest and established models = 0.192584 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 57 components and 0.192584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098134Jy  sigma=0.179160
! Fit after  self-cal, rms=0.098141Jy  sigma=0.179154
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098141Jy  sigma=0.179154
! Fit after  self-cal, rms=0.099933Jy  sigma=0.179134
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.635 mas, bmaj=9.97 mas, bpa=-0.2689 degrees
! Estimated noise=4.70665 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000310234 Jy
! Component: 100  -  total flux cleaned = 0.000396098 Jy
! Component: 150  -  total flux cleaned = 0.000474598 Jy
! Component: 200  -  total flux cleaned = 0.000585184 Jy
! Total flux subtracted in 200 components = 0.000585184 Jy
! Clean residual min=-0.009429 max=0.013142 Jy/beam
! Clean residual mean=-0.000088 rms=0.003333 Jy/beam
! Combined flux in latest and established models = 0.193169 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 61 components and 0.193169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099890Jy  sigma=0.179085
! Fit after  self-cal, rms=0.099923Jy  sigma=0.179079
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.84197e-05 Jy
! Component: 100  -  total flux cleaned = 3.27198e-06 Jy
! Component: 150  -  total flux cleaned = 0.000103063 Jy
! Component: 200  -  total flux cleaned = 0.000165811 Jy
! Total flux subtracted in 200 components = 0.000165811 Jy
! Clean residual min=-0.009387 max=0.013178 Jy/beam
! Clean residual mean=-0.000088 rms=0.003329 Jy/beam
! Combined flux in latest and established models = 0.193335 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 63 components and 0.193335 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099898Jy  sigma=0.179036
! Fit after  self-cal, rms=0.099903Jy  sigma=0.179033
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099903Jy  sigma=0.179033
! Fit after  self-cal, rms=0.101304Jy  sigma=0.179017
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.383 mas, bmaj=12.71 mas, bpa=16.51 degrees
! Estimated noise=5.51227 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00247031 Jy
! Component: 100  -  total flux cleaned = 0.00266917 Jy
! Component: 150  -  total flux cleaned = 0.00276459 Jy
! Component: 200  -  total flux cleaned = 0.00284301 Jy
! Total flux subtracted in 200 components = 0.00284301 Jy
! Clean residual min=-0.014424 max=0.022260 Jy/beam
! Clean residual mean=-0.000158 rms=0.005896 Jy/beam
! Combined flux in latest and established models = 0.196178 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 65 components and 0.196178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101397Jy  sigma=0.179204
! Fit after  self-cal, rms=0.101375Jy  sigma=0.179138
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000121448 Jy
! Component: 100  -  total flux cleaned = 3.86275e-05 Jy
! Component: 150  -  total flux cleaned = 0.000112292 Jy
! Component: 200  -  total flux cleaned = 0.000176209 Jy
! Total flux subtracted in 200 components = 0.000176209 Jy
! Clean residual min=-0.014289 max=0.022169 Jy/beam
! Clean residual mean=-0.000157 rms=0.005859 Jy/beam
! Combined flux in latest and established models = 0.196354 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 65 components and 0.196354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101585Jy  sigma=0.179506
! Fit after  self-cal, rms=0.101563Jy  sigma=0.179459
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.638 mas, bmaj=9.996 mas, bpa=-0.173 degrees
! Estimated noise=4.74029 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.638 x 9.996 at -0.173 degrees (North through East)
! Clean map  min=-0.0091176  max=0.11982 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.758 mas, bmaj=9.14 mas, bpa=0.3908 degrees
! Estimated noise=10.1232 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0734254 Jy
! Component: 100  -  total flux cleaned = 0.104391 Jy
! Component: 150  -  total flux cleaned = 0.123728 Jy
! Component: 200  -  total flux cleaned = 0.137288 Jy
! Total flux subtracted in 200 components = 0.137288 Jy
! Clean residual min=-0.011340 max=0.010933 Jy/beam
! Clean residual mean=-0.000031 rms=0.002812 Jy/beam
! Combined flux in latest and established models = 0.137288 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.137288 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.638 mas, bmaj=9.996 mas, bpa=-0.173 degrees
! Estimated noise=4.74029 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0233623 Jy
! Component: 100  -  total flux cleaned = 0.037162 Jy
! Component: 150  -  total flux cleaned = 0.0456202 Jy
! Component: 200  -  total flux cleaned = 0.0508133 Jy
! Total flux subtracted in 200 components = 0.0508133 Jy
! Clean residual min=-0.009828 max=0.012839 Jy/beam
! Clean residual mean=-0.000085 rms=0.003416 Jy/beam
! Combined flux in latest and established models = 0.188102 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 47 components and 0.188102 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.383 mas, bmaj=12.71 mas, bpa=16.51 degrees
! Estimated noise=5.51227 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0063574 Jy
! Component: 100  -  total flux cleaned = 0.00825069 Jy
! Component: 150  -  total flux cleaned = 0.0082533 Jy
! Component: 200  -  total flux cleaned = 0.00833041 Jy
! Total flux subtracted in 200 components = 0.00833041 Jy
! Clean residual min=-0.014258 max=0.022318 Jy/beam
! Clean residual mean=-0.000161 rms=0.005918 Jy/beam
! Combined flux in latest and established models = 0.196432 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.67072e-05 Jy
! Component: 100  -  total flux cleaned = 7.17557e-05 Jy
! Component: 150  -  total flux cleaned = 0.000137298 Jy
! Component: 200  -  total flux cleaned = 0.000192689 Jy
! Total flux subtracted in 200 components = 0.000192689 Jy
! Clean residual min=-0.014108 max=0.022233 Jy/beam
! Clean residual mean=-0.000159 rms=0.005885 Jy/beam
! Combined flux in latest and established models = 0.196625 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 51 components and 0.196625 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.638 mas, bmaj=9.996 mas, bpa=-0.173 degrees
! Estimated noise=4.74029 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.98155e-05 Jy
! Component: 100  -  total flux cleaned = -0.000567476 Jy
! Component: 150  -  total flux cleaned = -0.00089791 Jy
! Component: 200  -  total flux cleaned = -0.00114216 Jy
! Total flux subtracted in 200 components = -0.00114216 Jy
! Clean residual min=-0.009059 max=0.013223 Jy/beam
! Clean residual mean=-0.000089 rms=0.003333 Jy/beam
! Combined flux in latest and established models = 0.195482 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 65 components and 0.195482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101419Jy  sigma=0.179176
! Fit after  self-cal, rms=0.101392Jy  sigma=0.179066
wmodel /g0/scr/pima/npcsb_uvs/J1909+7813_S_map.mod
! Writing 65 model components to file: /g0/scr/pima/npcsb_uvs/J1909+7813_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1909+7813_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1909+7813_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1909+7813_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1909+7813_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00566402 Jy
! Component: 100  -  total flux cleaned = 0.0104107 Jy
! Component: 150  -  total flux cleaned = 0.0142805 Jy
! Component: 200  -  total flux cleaned = 0.0169963 Jy
! Component: 250  -  total flux cleaned = 0.0196102 Jy
! Component: 300  -  total flux cleaned = 0.0218965 Jy
! Component: 350  -  total flux cleaned = 0.0238011 Jy
! Component: 400  -  total flux cleaned = 0.0253621 Jy
! Component: 450  -  total flux cleaned = 0.0266286 Jy
! Component: 500  -  total flux cleaned = 0.0280319 Jy
! Component: 550  -  total flux cleaned = 0.0291753 Jy
! Component: 600  -  total flux cleaned = 0.0299972 Jy
! Component: 650  -  total flux cleaned = 0.0305211 Jy
! Component: 700  -  total flux cleaned = 0.0310298 Jy
! Component: 750  -  total flux cleaned = 0.0315201 Jy
! Component: 800  -  total flux cleaned = 0.0319922 Jy
! Component: 850  -  total flux cleaned = 0.0322952 Jy
! Component: 900  -  total flux cleaned = 0.0325895 Jy
! Component: 950  -  total flux cleaned = 0.0329446 Jy
! Component: 1000  -  total flux cleaned = 0.0331509 Jy
! Component: 1050  -  total flux cleaned = 0.0333516 Jy
! Component: 1100  -  total flux cleaned = 0.0334826 Jy
! Component: 1150  -  total flux cleaned = 0.0334823 Jy
! Component: 1200  -  total flux cleaned = 0.0334218 Jy
! Component: 1250  -  total flux cleaned = 0.0333616 Jy
! Component: 1300  -  total flux cleaned = 0.0333039 Jy
! Component: 1350  -  total flux cleaned = 0.0331914 Jy
! Component: 1400  -  total flux cleaned = 0.0333587 Jy
! Component: 1450  -  total flux cleaned = 0.0332491 Jy
! Component: 1500  -  total flux cleaned = 0.0331955 Jy
! Component: 1550  -  total flux cleaned = 0.0330378 Jy
! Component: 1600  -  total flux cleaned = 0.0328334 Jy
! Component: 1650  -  total flux cleaned = 0.0326846 Jy
! Component: 1700  -  total flux cleaned = 0.0325384 Jy
! Component: 1750  -  total flux cleaned = 0.0321063 Jy
! Component: 1800  -  total flux cleaned = 0.031873 Jy
! Component: 1850  -  total flux cleaned = 0.0316431 Jy
! Component: 1900  -  total flux cleaned = 0.0315081 Jy
! Component: 1950  -  total flux cleaned = 0.0312416 Jy
! Component: 2000  -  total flux cleaned = 0.0309804 Jy
! Component: 2050  -  total flux cleaned = 0.0306804 Jy
! Component: 2100  -  total flux cleaned = 0.0303858 Jy
! Component: 2150  -  total flux cleaned = 0.0302207 Jy
! Component: 2200  -  total flux cleaned = 0.029814 Jy
! Component: 2250  -  total flux cleaned = 0.0294939 Jy
! Component: 2300  -  total flux cleaned = 0.0292175 Jy
! Component: 2350  -  total flux cleaned = 0.0290621 Jy
! Component: 2400  -  total flux cleaned = 0.0287548 Jy
! Component: 2450  -  total flux cleaned = 0.0284516 Jy
! Component: 2500  -  total flux cleaned = 0.0283018 Jy
! Component: 2550  -  total flux cleaned = 0.0280807 Jy
! Component: 2600  -  total flux cleaned = 0.0278986 Jy
! Component: 2650  -  total flux cleaned = 0.0277182 Jy
! Component: 2700  -  total flux cleaned = 0.0274688 Jy
! Component: 2750  -  total flux cleaned = 0.0273281 Jy
! Component: 2800  -  total flux cleaned = 0.0271186 Jy
! Component: 2850  -  total flux cleaned = 0.0268423 Jy
! Component: 2900  -  total flux cleaned = 0.0266717 Jy
! Component: 2950  -  total flux cleaned = 0.0265364 Jy
! Component: 3000  -  total flux cleaned = 0.0263017 Jy
! Component: 3050  -  total flux cleaned = 0.0261688 Jy
! Component: 3100  -  total flux cleaned = 0.0260366 Jy
! Component: 3150  -  total flux cleaned = 0.0258726 Jy
! Component: 3200  -  total flux cleaned = 0.0256773 Jy
! Component: 3250  -  total flux cleaned = 0.0255802 Jy
! Component: 3300  -  total flux cleaned = 0.0253876 Jy
! Component: 3350  -  total flux cleaned = 0.0251325 Jy
! Component: 3400  -  total flux cleaned = 0.0250056 Jy
! Component: 3450  -  total flux cleaned = 0.0248164 Jy
! Component: 3500  -  total flux cleaned = 0.0246911 Jy
! Component: 3550  -  total flux cleaned = 0.0245974 Jy
! Component: 3600  -  total flux cleaned = 0.0243802 Jy
! Component: 3650  -  total flux cleaned = 0.0243184 Jy
! Component: 3700  -  total flux cleaned = 0.0241956 Jy
! Component: 3750  -  total flux cleaned = 0.0241342 Jy
! Component: 3800  -  total flux cleaned = 0.0239517 Jy
! Component: 3850  -  total flux cleaned = 0.0238606 Jy
! Component: 3900  -  total flux cleaned = 0.023619 Jy
! Component: 3950  -  total flux cleaned = 0.0235287 Jy
! Component: 4000  -  total flux cleaned = 0.0234085 Jy
! Component: 4050  -  total flux cleaned = 0.0232887 Jy
! Total flux subtracted in 4096 components = 0.0231994 Jy
! Clean residual min=-0.001965 max=0.002050 Jy/beam
! Clean residual mean=-0.000011 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.218682 Jy
keep
! Adding 416 model components to the UV plane model.
! The established model now contains 481 components and 0.218682 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1909+7813_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.638 x 9.996 at -0.173 degrees (North through East)
! Clean map  min=-0.0034259  max=0.12055 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1909+7813_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.120551 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000526827 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.31105 1.31105 2.6221 5.24421 10.4884 20.9768 41.9537 83.9073
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0015 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.12 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1909+7813_S_uvs.log closed on Wed Sep 25 00:13:24 2013