! Started logfile: /g0/scr/pima/npcsb_uvs/J1842+7946_X_uvs.log on Wed Sep 25 00:07:28 2013 obs /g0/scr/pima/npcsb_uvs/J1842+7946_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1842+7946_X_uva.fits ! AN table 1: 46 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.706522 visibilities/baseline/integration-bin. ! Found source: J1842+7946 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 8e+06 1 8e+06 ! 02 2 8.47993e+09 8e+06 1 8e+06 ! 03 3 8.79493e+09 8e+06 1 8e+06 ! 04 4 8.89993e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3640 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1842+7946_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.028089Jy sigma=1.734570 ! Fit after self-cal, rms=0.895024Jy sigma=1.493977 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.089 mas, bmaj=2.698 mas, bpa=-17.34 degrees ! Estimated noise=15.5661 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0925604 Jy ! Component: 100 - total flux cleaned = 0.123443 Jy ! Total flux subtracted in 100 components = 0.123443 Jy ! Clean residual min=-0.024133 max=0.025029 Jy/beam ! Clean residual mean=-0.000066 rms=0.006950 Jy/beam ! Combined flux in latest and established models = 0.123443 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.123443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193485Jy sigma=0.291574 ! Fit after self-cal, rms=0.191887Jy sigma=0.288905 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.578 mas, bmaj=2.782 mas, bpa=-12.15 degrees ! Estimated noise=7.09988 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189077 Jy ! Component: 100 - total flux cleaned = 0.0250746 Jy ! Component: 150 - total flux cleaned = 0.0257389 Jy ! Component: 200 - total flux cleaned = 0.025966 Jy ! Total flux subtracted in 200 components = 0.025966 Jy ! Clean residual min=-0.038688 max=0.041306 Jy/beam ! Clean residual mean=-0.000139 rms=0.011336 Jy/beam ! Combined flux in latest and established models = 0.149409 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 23 components and 0.149408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190472Jy sigma=0.285392 ! Fit after self-cal, rms=0.190336Jy sigma=0.285250 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 1.28 KP 1.46 ! LA 0.84 OV 1.03 PT 0.97 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.95 HN 1.15 KP 1.46 ! LA 0.85 OV 1.03 PT 0.94 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 1.06 KP 1.25 ! LA 0.79 OV 1.11 PT 0.90 SC 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.00 KP 1.28 ! LA 0.84 OV 1.05 PT 0.97 SC 0.87 ! ! ! Fit before self-cal, rms=0.190336Jy sigma=0.285250 ! Fit after self-cal, rms=0.215352Jy sigma=0.282119 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.599 mas, bmaj=2.759 mas, bpa=-10.4 degrees ! Estimated noise=7.00796 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00051765 Jy ! Component: 100 - total flux cleaned = -1.98503e-05 Jy ! Component: 150 - total flux cleaned = 0.000250178 Jy ! Component: 200 - total flux cleaned = 0.000415813 Jy ! Total flux subtracted in 200 components = 0.000415813 Jy ! Clean residual min=-0.034049 max=0.038650 Jy/beam ! Clean residual mean=-0.000098 rms=0.010560 Jy/beam ! Combined flux in latest and established models = 0.149824 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 0.149824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215251Jy sigma=0.281981 ! Fit after self-cal, rms=0.216733Jy sigma=0.280793 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216733Jy sigma=0.280793 ! Fit after self-cal, rms=0.240300Jy sigma=0.280379 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.609 mas, bmaj=2.748 mas, bpa=-9.315 degrees ! Estimated noise=7.07289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000917959 Jy ! Component: 100 - total flux cleaned = 0.00046811 Jy ! Component: 150 - total flux cleaned = 0.000465484 Jy ! Component: 200 - total flux cleaned = 0.00054667 Jy ! Total flux subtracted in 200 components = 0.00054667 Jy ! Clean residual min=-0.035918 max=0.039431 Jy/beam ! Clean residual mean=-0.000115 rms=0.011000 Jy/beam ! Combined flux in latest and established models = 0.150371 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.150371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240075Jy sigma=0.280298 ! Fit after self-cal, rms=0.240809Jy sigma=0.279824 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000221361 Jy ! Component: 100 - total flux cleaned = -0.000638599 Jy ! Component: 150 - total flux cleaned = -0.000637813 Jy ! Component: 200 - total flux cleaned = -0.000714408 Jy ! Total flux subtracted in 200 components = -0.000714408 Jy ! Clean residual min=-0.036575 max=0.038938 Jy/beam ! Clean residual mean=-0.000122 rms=0.011044 Jy/beam ! Combined flux in latest and established models = 0.149657 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 44 components and 0.149657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240621Jy sigma=0.279816 ! Fit after self-cal, rms=0.240763Jy sigma=0.279742 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240763Jy sigma=0.279742 ! Fit after self-cal, rms=0.249121Jy sigma=0.279666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.611 mas, bmaj=2.756 mas, bpa=-8.352 degrees ! Estimated noise=7.07525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000550679 Jy ! Component: 100 - total flux cleaned = 0.000528441 Jy ! Component: 150 - total flux cleaned = 0.000611766 Jy ! Component: 200 - total flux cleaned = 0.000613947 Jy ! Total flux subtracted in 200 components = 0.000613947 Jy ! Clean residual min=-0.036922 max=0.039357 Jy/beam ! Clean residual mean=-0.000119 rms=0.011023 Jy/beam ! Combined flux in latest and established models = 0.150271 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.150271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248950Jy sigma=0.279616 ! Fit after self-cal, rms=0.249420Jy sigma=0.279525 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000132019 Jy ! Component: 100 - total flux cleaned = -0.000136722 Jy ! Component: 150 - total flux cleaned = -0.000216329 Jy ! Component: 200 - total flux cleaned = -0.000363505 Jy ! Total flux subtracted in 200 components = -0.000363505 Jy ! Clean residual min=-0.036950 max=0.039155 Jy/beam ! Clean residual mean=-0.000121 rms=0.010983 Jy/beam ! Combined flux in latest and established models = 0.149907 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.149907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249275Jy sigma=0.279525 ! Fit after self-cal, rms=0.249396Jy sigma=0.279464 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249396Jy sigma=0.279464 ! Fit after self-cal, rms=0.253531Jy sigma=0.279432 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.584 mas, bmaj=4.286 mas, bpa=36.15 degrees ! Estimated noise=7.58368 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000705039 Jy ! Component: 100 - total flux cleaned = 0.000690897 Jy ! Component: 150 - total flux cleaned = 0.000477153 Jy ! Component: 200 - total flux cleaned = 0.000287658 Jy ! Total flux subtracted in 200 components = 0.000287658 Jy ! Clean residual min=-0.047364 max=0.049383 Jy/beam ! Clean residual mean=-0.000174 rms=0.014396 Jy/beam ! Combined flux in latest and established models = 0.150195 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 54 components and 0.150195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253448Jy sigma=0.279395 ! Fit after self-cal, rms=0.253426Jy sigma=0.279243 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275992 Jy ! Component: 100 - total flux cleaned = 8.03332e-05 Jy ! Component: 150 - total flux cleaned = -0.000191156 Jy ! Component: 200 - total flux cleaned = -0.000357898 Jy ! Total flux subtracted in 200 components = -0.000357898 Jy ! Clean residual min=-0.047064 max=0.049024 Jy/beam ! Clean residual mean=-0.000176 rms=0.014284 Jy/beam ! Combined flux in latest and established models = 0.149837 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 57 components and 0.149837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253380Jy sigma=0.279273 ! Fit after self-cal, rms=0.253348Jy sigma=0.279213 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.607 mas, bmaj=2.766 mas, bpa=-7.734 degrees ! Estimated noise=7.06459 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.607 x 2.766 at -7.734 degrees (North through East) ! Clean map min=-0.036876 max=0.1137 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.12 mas, bmaj=2.636 mas, bpa=-14.56 degrees ! Estimated noise=15.8369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.093557 Jy ! Component: 100 - total flux cleaned = 0.122712 Jy ! Component: 150 - total flux cleaned = 0.135925 Jy ! Component: 200 - total flux cleaned = 0.139519 Jy ! Total flux subtracted in 200 components = 0.139519 Jy ! Clean residual min=-0.029010 max=0.029198 Jy/beam ! Clean residual mean=-0.000065 rms=0.007974 Jy/beam ! Combined flux in latest and established models = 0.139519 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.139519 Jy ! Inverting map and beam ! Estimated beam: bmin=1.607 mas, bmaj=2.766 mas, bpa=-7.734 degrees ! Estimated noise=7.06459 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00795836 Jy ! Component: 100 - total flux cleaned = 0.00738974 Jy ! Component: 150 - total flux cleaned = 0.00713844 Jy ! Component: 200 - total flux cleaned = 0.00670824 Jy ! Total flux subtracted in 200 components = 0.00670824 Jy ! Clean residual min=-0.037281 max=0.039495 Jy/beam ! Clean residual mean=-0.000127 rms=0.010937 Jy/beam ! Combined flux in latest and established models = 0.146227 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 26 components and 0.146227 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.584 mas, bmaj=4.286 mas, bpa=36.15 degrees ! Estimated noise=7.58368 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176709 Jy ! Component: 100 - total flux cleaned = 0.0020917 Jy ! Component: 150 - total flux cleaned = 0.0023839 Jy ! Component: 200 - total flux cleaned = 0.00265434 Jy ! Total flux subtracted in 200 components = 0.00265434 Jy ! Clean residual min=-0.047707 max=0.048895 Jy/beam ! Clean residual mean=-0.000179 rms=0.014331 Jy/beam ! Combined flux in latest and established models = 0.148882 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122475 Jy ! Component: 100 - total flux cleaned = 0.000353266 Jy ! Component: 150 - total flux cleaned = 0.00045803 Jy ! Component: 200 - total flux cleaned = 0.000555885 Jy ! Total flux subtracted in 200 components = 0.000555885 Jy ! Clean residual min=-0.047633 max=0.048701 Jy/beam ! Clean residual mean=-0.000177 rms=0.014321 Jy/beam ! Combined flux in latest and established models = 0.149438 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 35 components and 0.149437 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.607 mas, bmaj=2.766 mas, bpa=-7.734 degrees ! Estimated noise=7.06459 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010808 Jy ! Component: 100 - total flux cleaned = -0.000962758 Jy ! Component: 150 - total flux cleaned = -0.000860042 Jy ! Component: 200 - total flux cleaned = -0.000857819 Jy ! Total flux subtracted in 200 components = -0.000857819 Jy ! Clean residual min=-0.037145 max=0.038453 Jy/beam ! Clean residual mean=-0.000123 rms=0.010891 Jy/beam ! Combined flux in latest and established models = 0.14858 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.14858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253388Jy sigma=0.279395 ! Fit after self-cal, rms=0.253507Jy sigma=0.279228 wmodel /g0/scr/pima/npcsb_uvs/J1842+7946_X_map.mod ! Writing 42 model components to file: /g0/scr/pima/npcsb_uvs/J1842+7946_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J1842+7946_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1842+7946_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1842+7946_X_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1842+7946_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030439 Jy ! Component: 100 - total flux cleaned = 0.00120595 Jy ! Component: 150 - total flux cleaned = 0.00219532 Jy ! Component: 200 - total flux cleaned = 0.00313452 Jy ! Component: 250 - total flux cleaned = 0.00398766 Jy ! Component: 300 - total flux cleaned = 0.00474893 Jy ! Component: 350 - total flux cleaned = 0.0054179 Jy ! Component: 400 - total flux cleaned = 0.00636661 Jy ! Component: 450 - total flux cleaned = 0.00665425 Jy ! Component: 500 - total flux cleaned = 0.00719601 Jy ! Component: 550 - total flux cleaned = 0.0076982 Jy ! Component: 600 - total flux cleaned = 0.00817744 Jy ! Component: 650 - total flux cleaned = 0.0090784 Jy ! Component: 700 - total flux cleaned = 0.00992748 Jy ! Component: 750 - total flux cleaned = 0.0109247 Jy ! Component: 800 - total flux cleaned = 0.0116769 Jy ! Component: 850 - total flux cleaned = 0.0122082 Jy ! Component: 900 - total flux cleaned = 0.0127138 Jy ! Component: 950 - total flux cleaned = 0.0133524 Jy ! Component: 1000 - total flux cleaned = 0.0138019 Jy ! Component: 1050 - total flux cleaned = 0.0140852 Jy ! Component: 1100 - total flux cleaned = 0.0144924 Jy ! Component: 1150 - total flux cleaned = 0.0146213 Jy ! Component: 1200 - total flux cleaned = 0.0148734 Jy ! Component: 1250 - total flux cleaned = 0.015118 Jy ! Component: 1300 - total flux cleaned = 0.0149986 Jy ! Component: 1350 - total flux cleaned = 0.0147688 Jy ! Component: 1400 - total flux cleaned = 0.0144374 Jy ! Component: 1450 - total flux cleaned = 0.0141154 Jy ! Component: 1500 - total flux cleaned = 0.0137012 Jy ! Component: 1550 - total flux cleaned = 0.0136021 Jy ! Component: 1600 - total flux cleaned = 0.0135033 Jy ! Component: 1650 - total flux cleaned = 0.0134061 Jy ! Component: 1700 - total flux cleaned = 0.0132197 Jy ! Component: 1750 - total flux cleaned = 0.0133107 Jy ! Component: 1800 - total flux cleaned = 0.0133995 Jy ! Component: 1850 - total flux cleaned = 0.0132245 Jy ! Component: 1900 - total flux cleaned = 0.012797 Jy ! Component: 1950 - total flux cleaned = 0.0123773 Jy ! Component: 2000 - total flux cleaned = 0.0120453 Jy ! Component: 2050 - total flux cleaned = 0.0115552 Jy ! Component: 2100 - total flux cleaned = 0.0111521 Jy ! Component: 2150 - total flux cleaned = 0.0106739 Jy ! Component: 2200 - total flux cleaned = 0.0101218 Jy ! Component: 2250 - total flux cleaned = 0.00949646 Jy ! Component: 2300 - total flux cleaned = 0.00880003 Jy ! Component: 2350 - total flux cleaned = 0.00833928 Jy ! Component: 2400 - total flux cleaned = 0.00773065 Jy ! Component: 2450 - total flux cleaned = 0.00720167 Jy ! Component: 2500 - total flux cleaned = 0.00667632 Jy ! Component: 2550 - total flux cleaned = 0.00592903 Jy ! Component: 2600 - total flux cleaned = 0.0052601 Jy ! Component: 2650 - total flux cleaned = 0.00466782 Jy ! Component: 2700 - total flux cleaned = 0.00407804 Jy ! Component: 2750 - total flux cleaned = 0.00341756 Jy ! Component: 2800 - total flux cleaned = 0.00283293 Jy ! Component: 2850 - total flux cleaned = 0.00225012 Jy ! Component: 2900 - total flux cleaned = 0.00166945 Jy ! Component: 2950 - total flux cleaned = 0.00116275 Jy ! Component: 3000 - total flux cleaned = 0.000584645 Jy ! Component: 3050 - total flux cleaned = 0.000151966 Jy ! Component: 3100 - total flux cleaned = -0.000352368 Jy ! Component: 3150 - total flux cleaned = -0.000712573 Jy ! Component: 3200 - total flux cleaned = -0.00107333 Jy ! Component: 3250 - total flux cleaned = -0.00165042 Jy ! Component: 3300 - total flux cleaned = -0.00193945 Jy ! Component: 3350 - total flux cleaned = -0.00244564 Jy ! Component: 3400 - total flux cleaned = -0.00273499 Jy ! Component: 3450 - total flux cleaned = -0.00324223 Jy ! Component: 3500 - total flux cleaned = -0.00367824 Jy ! Component: 3550 - total flux cleaned = -0.0039699 Jy ! Component: 3600 - total flux cleaned = -0.00440746 Jy ! Component: 3650 - total flux cleaned = -0.0047006 Jy ! Component: 3700 - total flux cleaned = -0.00514108 Jy ! Component: 3750 - total flux cleaned = -0.00558257 Jy ! Component: 3800 - total flux cleaned = -0.00580435 Jy ! Component: 3850 - total flux cleaned = -0.0063234 Jy ! Component: 3900 - total flux cleaned = -0.00676951 Jy ! Component: 3950 - total flux cleaned = -0.00706806 Jy ! Component: 4000 - total flux cleaned = -0.00736771 Jy ! Component: 4050 - total flux cleaned = -0.00744265 Jy ! Total flux subtracted in 4096 components = -0.00766994 Jy ! Clean residual min=-0.004750 max=0.004132 Jy/beam ! Clean residual mean=-0.000012 rms=0.001432 Jy/beam ! Combined flux in latest and established models = 0.14091 Jy keep ! Adding 414 model components to the UV plane model. ! The established model now contains 456 components and 0.14091 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1842+7946_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.607 x 2.766 at -7.734 degrees (North through East) ! Clean map min=-0.017384 max=0.11553 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1842+7946_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.115529 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00166898 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.33393 4.33393 8.66787 17.3357 34.6715 69.343 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.115 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1842+7946_X_uvs.log closed on Wed Sep 25 00:07:33 2013