! Started logfile: /g0/scr/pima/npcsb_uvs/J1751+0939_S_uvs.log on Wed Sep 25 00:12:50 2013
obs /g0/scr/pima/npcsb_uvs/J1751+0939_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1751+0939_S_uva.fits
! AN table 1: 7 integrations on 36 of 36 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1751+0939
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1008 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1751+0939_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.244417Jy  sigma=8.843683
! Fit after  self-cal, rms=0.332918Jy  sigma=2.299032
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.493 mas, bmaj=6.817 mas, bpa=-0.9792 degrees
! Estimated noise=3.99774 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.558242 Jy
! Component: 100  -  total flux cleaned = 0.692212 Jy
! Total flux subtracted in 100 components = 0.692212 Jy
! Clean residual min=-0.037853 max=0.077073 Jy/beam
! Clean residual mean=0.000022 rms=0.012932 Jy/beam
! Combined flux in latest and established models = 0.692212 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.692212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.205577Jy  sigma=1.274732
! Fit after  self-cal, rms=0.205513Jy  sigma=1.274238
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.809 mas, bmaj=7.183 mas, bpa=0.3051 degrees
! Estimated noise=3.30504 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.5, -2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0821608 Jy
! Component: 100  -  total flux cleaned = 0.124059 Jy
! Component: 150  -  total flux cleaned = 0.150082 Jy
! Component: 200  -  total flux cleaned = 0.161431 Jy
! Total flux subtracted in 200 components = 0.161431 Jy
! Clean residual min=-0.032927 max=0.055586 Jy/beam
! Clean residual mean=0.000027 rms=0.009202 Jy/beam
! Combined flux in latest and established models = 0.853643 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 40 components and 0.853643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.167917Jy  sigma=0.998039
! Fit after  self-cal, rms=0.164931Jy  sigma=0.969133
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     HN        0.99     KP        0.95     LA        1.06     
!   MK        0.96     NL        1.21     OV        0.95     PT        1.06     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        1.03     KP        0.97     LA        1.00     
!   MK        0.97     NL        1.15     OV        0.95     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     HN        1.03     KP        0.96     LA        0.83     
!   MK        1.08     NL        1.37     OV        0.97     PT        1.04     
!   SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        0.98     KP        0.90     LA        0.71     
!   MK        1.08     NL        1.15     OV        0.85     PT        0.93     
!   SC        1.08     
! 
! 
! Fit before self-cal, rms=0.164931Jy  sigma=0.969133
! Fit after  self-cal, rms=0.114816Jy  sigma=0.615859
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.842 mas, bmaj=7.283 mas, bpa=0.5099 degrees
! Estimated noise=3.30992 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00923471 Jy
! Component: 100  -  total flux cleaned = -0.0109328 Jy
! Component: 150  -  total flux cleaned = -0.011392 Jy
! Component: 200  -  total flux cleaned = -0.0114079 Jy
! Total flux subtracted in 200 components = -0.0114079 Jy
! Clean residual min=-0.014831 max=0.014079 Jy/beam
! Clean residual mean=-0.000003 rms=0.003085 Jy/beam
! Combined flux in latest and established models = 0.842235 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 61 components and 0.842235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113273Jy  sigma=0.605398
! Fit after  self-cal, rms=0.113250Jy  sigma=0.604370
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113250Jy  sigma=0.604370
! Fit after  self-cal, rms=0.113251Jy  sigma=0.602727
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.839 mas, bmaj=7.288 mas, bpa=0.4195 degrees
! Estimated noise=3.30446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00390124 Jy
! Component: 100  -  total flux cleaned = -0.0050288 Jy
! Component: 150  -  total flux cleaned = -0.0053356 Jy
! Component: 200  -  total flux cleaned = -0.00533744 Jy
! Total flux subtracted in 200 components = -0.00533744 Jy
! Clean residual min=-0.013424 max=0.013309 Jy/beam
! Clean residual mean=-0.000004 rms=0.002854 Jy/beam
! Combined flux in latest and established models = 0.836898 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 76 components and 0.836897 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112534Jy  sigma=0.598186
! Fit after  self-cal, rms=0.112424Jy  sigma=0.597583
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, 4.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127192 Jy
! Component: 100  -  total flux cleaned = 0.0164152 Jy
! Component: 150  -  total flux cleaned = 0.0168225 Jy
! Component: 200  -  total flux cleaned = 0.0166494 Jy
! Total flux subtracted in 200 components = 0.0166494 Jy
! Clean residual min=-0.012268 max=0.009206 Jy/beam
! Clean residual mean=-0.000014 rms=0.002373 Jy/beam
! Combined flux in latest and established models = 0.853547 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 96 components and 0.853547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110617Jy  sigma=0.585198
! Fit after  self-cal, rms=0.110496Jy  sigma=0.583760
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110496Jy  sigma=0.583760
! Fit after  self-cal, rms=0.109930Jy  sigma=0.583027
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.834 mas, bmaj=7.28 mas, bpa=0.4114 degrees
! Estimated noise=3.29794 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000819145 Jy
! Component: 100  -  total flux cleaned = 0.000494744 Jy
! Component: 150  -  total flux cleaned = 0.000603439 Jy
! Component: 200  -  total flux cleaned = 0.000810684 Jy
! Total flux subtracted in 200 components = 0.000810684 Jy
! Clean residual min=-0.011261 max=0.008378 Jy/beam
! Clean residual mean=-0.000011 rms=0.002181 Jy/beam
! Combined flux in latest and established models = 0.854358 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 116 components and 0.854358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109473Jy  sigma=0.579925
! Fit after  self-cal, rms=0.109409Jy  sigma=0.579272
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.40446e-05 Jy
! Component: 100  -  total flux cleaned = -0.000378879 Jy
! Component: 150  -  total flux cleaned = -0.000380235 Jy
! Component: 200  -  total flux cleaned = -0.00029924 Jy
! Total flux subtracted in 200 components = -0.00029924 Jy
! Clean residual min=-0.010436 max=0.008107 Jy/beam
! Clean residual mean=-0.000011 rms=0.002104 Jy/beam
! Combined flux in latest and established models = 0.854058 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 129 components and 0.854058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109214Jy  sigma=0.577920
! Fit after  self-cal, rms=0.109198Jy  sigma=0.577615
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109198Jy  sigma=0.577615
! Fit after  self-cal, rms=0.108946Jy  sigma=0.577215
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.178 mas, bmaj=11.11 mas, bpa=-3.436 degrees
! Estimated noise=4.27631 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000669552 Jy
! Component: 100  -  total flux cleaned = -0.000656462 Jy
! Component: 150  -  total flux cleaned = -0.000729154 Jy
! Component: 200  -  total flux cleaned = -0.000730899 Jy
! Total flux subtracted in 200 components = -0.000730899 Jy
! Clean residual min=-0.013630 max=0.010128 Jy/beam
! Clean residual mean=-0.000024 rms=0.003258 Jy/beam
! Combined flux in latest and established models = 0.853328 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 154 components and 0.853328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108871Jy  sigma=0.576750
! Fit after  self-cal, rms=0.108869Jy  sigma=0.576376
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000311136 Jy
! Component: 100  -  total flux cleaned = -0.000454717 Jy
! Component: 150  -  total flux cleaned = -0.000453402 Jy
! Component: 200  -  total flux cleaned = -0.000507374 Jy
! Total flux subtracted in 200 components = -0.000507374 Jy
! Clean residual min=-0.013252 max=0.010046 Jy/beam
! Clean residual mean=-0.000023 rms=0.003180 Jy/beam
! Combined flux in latest and established models = 0.85282 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 168 components and 0.85282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108846Jy  sigma=0.576061
! Fit after  self-cal, rms=0.108835Jy  sigma=0.575892
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.833 mas, bmaj=7.278 mas, bpa=0.4133 degrees
! Estimated noise=3.29355 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.833 x 7.278 at 0.4133 degrees (North through East)
! Clean map  min=-0.0095245  max=0.69673 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108835Jy  sigma=0.575892
! Fit after  self-cal, rms=0.106780Jy  sigma=0.540008
! Inverting map and beam 
! Estimated beam: bmin=2.83 mas, bmaj=7.274 mas, bpa=0.398 degrees
! Estimated noise=3.28926 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00118696 Jy
! Component: 100  -  total flux cleaned = -0.00101208 Jy
! Component: 150  -  total flux cleaned = -0.000686297 Jy
! Component: 200  -  total flux cleaned = -0.000388015 Jy
! Total flux subtracted in 200 components = -0.000388015 Jy
! Clean residual min=-0.008915 max=0.007407 Jy/beam
! Clean residual mean=-0.000009 rms=0.001902 Jy/beam
! Combined flux in latest and established models = 0.852432 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 186 components and 0.852432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106591Jy  sigma=0.538859
! Fit after  self-cal, rms=0.106583Jy  sigma=0.538795
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000207057 Jy
! Component: 100  -  total flux cleaned = -1.14551e-05 Jy
! Component: 150  -  total flux cleaned = 0.000233809 Jy
! Component: 200  -  total flux cleaned = 0.000522036 Jy
! Total flux subtracted in 200 components = 0.000522036 Jy
! Clean residual min=-0.008799 max=0.007389 Jy/beam
! Clean residual mean=-0.000009 rms=0.001879 Jy/beam
! Combined flux in latest and established models = 0.852954 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 193 components and 0.852954 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106490Jy  sigma=0.538248
! Fit after  self-cal, rms=0.106494Jy  sigma=0.538218
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106494Jy  sigma=0.538218
! Fit after  self-cal, rms=0.106412Jy  sigma=0.538005
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.505 mas, bmaj=6.901 mas, bpa=-0.9558 degrees
! Estimated noise=3.97212 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.554129 Jy
! Component: 100  -  total flux cleaned = 0.687476 Jy
! Component: 150  -  total flux cleaned = 0.745324 Jy
! Component: 200  -  total flux cleaned = 0.777211 Jy
! Total flux subtracted in 200 components = 0.777211 Jy
! Clean residual min=-0.012908 max=0.021401 Jy/beam
! Clean residual mean=0.000006 rms=0.003953 Jy/beam
! Combined flux in latest and established models = 0.777211 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.777211 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.83 mas, bmaj=7.272 mas, bpa=0.3985 degrees
! Estimated noise=3.28583 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (21, -29).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0265493 Jy
! Component: 100  -  total flux cleaned = 0.0415399 Jy
! Component: 150  -  total flux cleaned = 0.0515529 Jy
! Component: 200  -  total flux cleaned = 0.0590463 Jy
! Total flux subtracted in 200 components = 0.0590463 Jy
! Clean residual min=-0.008412 max=0.007457 Jy/beam
! Clean residual mean=-0.000001 rms=0.002144 Jy/beam
! Combined flux in latest and established models = 0.836257 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 53 components and 0.836257 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.179 mas, bmaj=11.09 mas, bpa=-3.411 degrees
! Estimated noise=4.27297 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00761122 Jy
! Component: 100  -  total flux cleaned = 0.00955462 Jy
! Component: 150  -  total flux cleaned = 0.0108083 Jy
! Component: 200  -  total flux cleaned = 0.0116781 Jy
! Total flux subtracted in 200 components = 0.0116781 Jy
! Clean residual min=-0.010880 max=0.010394 Jy/beam
! Clean residual mean=-0.000017 rms=0.003016 Jy/beam
! Combined flux in latest and established models = 0.847935 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00079837 Jy
! Component: 100  -  total flux cleaned = 0.00116874 Jy
! Component: 150  -  total flux cleaned = 0.00130123 Jy
! Component: 200  -  total flux cleaned = 0.00130253 Jy
! Total flux subtracted in 200 components = 0.00130253 Jy
! Clean residual min=-0.010810 max=0.010403 Jy/beam
! Clean residual mean=-0.000019 rms=0.002949 Jy/beam
! Combined flux in latest and established models = 0.849238 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 108 components and 0.849238 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.83 mas, bmaj=7.272 mas, bpa=0.3985 degrees
! Estimated noise=3.28583 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00096921 Jy
! Component: 100  -  total flux cleaned = 0.00109949 Jy
! Component: 150  -  total flux cleaned = 0.00144862 Jy
! Component: 200  -  total flux cleaned = 0.00184847 Jy
! Total flux subtracted in 200 components = 0.00184847 Jy
! Clean residual min=-0.007986 max=0.007438 Jy/beam
! Clean residual mean=-0.000008 rms=0.001816 Jy/beam
! Combined flux in latest and established models = 0.851086 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 128 components and 0.851086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106450Jy  sigma=0.537772
! Fit after  self-cal, rms=0.106306Jy  sigma=0.536654
wmodel /g0/scr/pima/npcsb_uvs/J1751+0939_S_map.mod
! Writing 128 model components to file: /g0/scr/pima/npcsb_uvs/J1751+0939_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1751+0939_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1751+0939_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1751+0939_S_map.win
! wwins: Wrote 4 windows to /g0/scr/pima/npcsb_uvs/J1751+0939_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00108668 Jy
! Component: 100  -  total flux cleaned = -0.00120223 Jy
! Component: 150  -  total flux cleaned = -0.000876589 Jy
! Component: 200  -  total flux cleaned = -0.000159676 Jy
! Component: 250  -  total flux cleaned = 0.000130056 Jy
! Component: 300  -  total flux cleaned = 0.000128809 Jy
! Component: 350  -  total flux cleaned = 0.00012772 Jy
! Component: 400  -  total flux cleaned = 0.000126659 Jy
! Component: 450  -  total flux cleaned = 0.000204781 Jy
! Component: 500  -  total flux cleaned = 0.000127582 Jy
! Component: 550  -  total flux cleaned = 0.000202928 Jy
! Component: 600  -  total flux cleaned = 0.000344366 Jy
! Component: 650  -  total flux cleaned = -1.72191e-06 Jy
! Component: 700  -  total flux cleaned = -0.00020124 Jy
! Component: 750  -  total flux cleaned = -0.000395098 Jy
! Component: 800  -  total flux cleaned = -0.000394898 Jy
! Component: 850  -  total flux cleaned = -0.000518644 Jy
! Component: 900  -  total flux cleaned = -0.000578514 Jy
! Component: 950  -  total flux cleaned = -0.00075362 Jy
! Component: 1000  -  total flux cleaned = -0.000809008 Jy
! Component: 1050  -  total flux cleaned = -0.000752299 Jy
! Component: 1100  -  total flux cleaned = -0.00064363 Jy
! Component: 1150  -  total flux cleaned = -0.00043216 Jy
! Component: 1200  -  total flux cleaned = -0.000328933 Jy
! Component: 1250  -  total flux cleaned = -0.000176413 Jy
! Component: 1300  -  total flux cleaned = -0.000125621 Jy
! Component: 1350  -  total flux cleaned = 7.03151e-05 Jy
! Component: 1400  -  total flux cleaned = 0.0003091 Jy
! Component: 1450  -  total flux cleaned = 0.000356288 Jy
! Component: 1500  -  total flux cleaned = 0.000632592 Jy
! Component: 1550  -  total flux cleaned = 0.000723178 Jy
! Component: 1600  -  total flux cleaned = 0.000857113 Jy
! Component: 1650  -  total flux cleaned = 0.00103278 Jy
! Component: 1700  -  total flux cleaned = 0.00116218 Jy
! Component: 1750  -  total flux cleaned = 0.00124784 Jy
! Component: 1800  -  total flux cleaned = 0.00129005 Jy
! Component: 1850  -  total flux cleaned = 0.00124902 Jy
! Component: 1900  -  total flux cleaned = 0.00141204 Jy
! Component: 1950  -  total flux cleaned = 0.0014917 Jy
! Component: 2000  -  total flux cleaned = 0.00141252 Jy
! Component: 2050  -  total flux cleaned = 0.00149129 Jy
! Component: 2100  -  total flux cleaned = 0.00156839 Jy
! Component: 2150  -  total flux cleaned = 0.00168278 Jy
! Component: 2200  -  total flux cleaned = 0.00172072 Jy
! Component: 2250  -  total flux cleaned = 0.00183179 Jy
! Component: 2300  -  total flux cleaned = 0.00183198 Jy
! Component: 2350  -  total flux cleaned = 0.0019768 Jy
! Component: 2400  -  total flux cleaned = 0.00204813 Jy
! Component: 2450  -  total flux cleaned = 0.00215423 Jy
! Component: 2500  -  total flux cleaned = 0.00211935 Jy
! Component: 2550  -  total flux cleaned = 0.00225775 Jy
! Component: 2600  -  total flux cleaned = 0.00229174 Jy
! Component: 2650  -  total flux cleaned = 0.00246058 Jy
! Component: 2700  -  total flux cleaned = 0.00249402 Jy
! Component: 2750  -  total flux cleaned = 0.00256015 Jy
! Component: 2800  -  total flux cleaned = 0.00262616 Jy
! Component: 2850  -  total flux cleaned = 0.00265922 Jy
! Component: 2900  -  total flux cleaned = 0.00278806 Jy
! Component: 2950  -  total flux cleaned = 0.00272414 Jy
! Component: 3000  -  total flux cleaned = 0.00278766 Jy
! Component: 3050  -  total flux cleaned = 0.00288158 Jy
! Component: 3100  -  total flux cleaned = 0.00300584 Jy
! Component: 3150  -  total flux cleaned = 0.00303682 Jy
! Component: 3200  -  total flux cleaned = 0.00315908 Jy
! Component: 3250  -  total flux cleaned = 0.003068 Jy
! Component: 3300  -  total flux cleaned = 0.0032184 Jy
! Component: 3350  -  total flux cleaned = 0.00318893 Jy
! Component: 3400  -  total flux cleaned = 0.00333695 Jy
! Component: 3450  -  total flux cleaned = 0.00333739 Jy
! Component: 3500  -  total flux cleaned = 0.00345453 Jy
! Component: 3550  -  total flux cleaned = 0.0035994 Jy
! Component: 3600  -  total flux cleaned = 0.00359955 Jy
! Component: 3650  -  total flux cleaned = 0.00365654 Jy
! Component: 3700  -  total flux cleaned = 0.0037133 Jy
! Component: 3750  -  total flux cleaned = 0.00374167 Jy
! Component: 3800  -  total flux cleaned = 0.00388149 Jy
! Component: 3850  -  total flux cleaned = 0.00399249 Jy
! Component: 3900  -  total flux cleaned = 0.0040202 Jy
! Component: 3950  -  total flux cleaned = 0.00410254 Jy
! Component: 4000  -  total flux cleaned = 0.00404812 Jy
! Component: 4050  -  total flux cleaned = 0.00410233 Jy
! Total flux subtracted in 4096 components = 0.00412937 Jy
! Clean residual min=-0.001843 max=0.001528 Jy/beam
! Clean residual mean=0.000001 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.855216 Jy
keep
! Adding 278 model components to the UV plane model.
! The established model now contains 406 components and 0.855216 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1751+0939_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.83 x 7.272 at 0.3985 degrees (North through East)
! Clean map  min=-0.0042917  max=0.69891 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1751+0939_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.698908 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000448912 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.192692 0.192692 0.385383 0.770767 1.54153 3.08307 6.16613 12.3323 24.6645 49.3291 98.6581
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0013 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.698 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1751+0939_S_uvs.log closed on Wed Sep 25 00:12:54 2013