! Started logfile: /g0/scr/pima/npcsb_uvs/J1743-0350_S_uvs.log on Wed Sep 25 00:12:45 2013 obs /g0/scr/pima/npcsb_uvs/J1743-0350_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1743-0350_S_uva.fits ! AN table 1: 25 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.938667 visibilities/baseline/integration-bin. ! Found source: J1743-0350 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23693e+09 8e+06 1 8e+06 ! 02 2 2.26693e+09 8e+06 1 8e+06 ! 03 3 2.35693e+09 8e+06 1 8e+06 ! 04 4 2.37693e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4224 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1743-0350_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=4.776405Jy sigma=15.115595 ! Fit after self-cal, rms=3.679897Jy sigma=11.640006 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.593 mas, bmaj=6.737 mas, bpa=-2.861 degrees ! Estimated noise=7.89999 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.4824 Jy ! Component: 100 - total flux cleaned = 4.24311 Jy ! Total flux subtracted in 100 components = 4.24311 Jy ! Clean residual min=-0.238143 max=0.335153 Jy/beam ! Clean residual mean=0.000079 rms=0.060648 Jy/beam ! Combined flux in latest and established models = 4.24312 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 4.24312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.012767Jy sigma=2.923397 ! Fit after self-cal, rms=1.012678Jy sigma=2.923304 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.032 mas, bmaj=7.629 mas, bpa=-2.898 degrees ! Estimated noise=4.90759 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.5, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.386657 Jy ! Component: 100 - total flux cleaned = 0.608885 Jy ! Component: 150 - total flux cleaned = 0.746342 Jy ! Component: 200 - total flux cleaned = 0.799508 Jy ! Total flux subtracted in 200 components = 0.799508 Jy ! Clean residual min=-0.211590 max=0.313407 Jy/beam ! Clean residual mean=-0.000084 rms=0.046941 Jy/beam ! Combined flux in latest and established models = 5.04262 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 42 components and 5.04262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.825661Jy sigma=2.234953 ! Fit after self-cal, rms=0.808130Jy sigma=2.140359 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 0.96 KP 0.94 ! LA 1.08 MK 0.93 NL 1.22 OV 0.94 ! PT 1.08 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.98 KP 0.95 ! LA 1.02 MK 0.98 NL 1.16 OV 0.95 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.00 HN 1.00 KP 0.96 ! LA 0.84 MK 1.08 NL 1.36 OV 0.96 ! PT 1.06 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 HN 0.95 KP 0.87 ! LA 0.70 MK 1.08 NL 1.13 OV 0.83 ! PT 0.95 SC 1.10 ! ! ! Fit before self-cal, rms=0.808130Jy sigma=2.140359 ! Fit after self-cal, rms=0.296710Jy sigma=0.689759 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=7.831 mas, bpa=-2.961 degrees ! Estimated noise=4.98913 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.045457 Jy ! Component: 100 - total flux cleaned = -0.0676739 Jy ! Component: 150 - total flux cleaned = -0.0721641 Jy ! Component: 200 - total flux cleaned = -0.073441 Jy ! Total flux subtracted in 200 components = -0.073441 Jy ! Clean residual min=-0.060031 max=0.057941 Jy/beam ! Clean residual mean=-0.000005 rms=0.012263 Jy/beam ! Combined flux in latest and established models = 4.96918 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 64 components and 4.96918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266775Jy sigma=0.638654 ! Fit after self-cal, rms=0.260043Jy sigma=0.626272 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260043Jy sigma=0.626272 ! Fit after self-cal, rms=0.256920Jy sigma=0.610999 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.094 mas, bmaj=7.83 mas, bpa=-2.903 degrees ! Estimated noise=4.97427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0432584 Jy ! Component: 100 - total flux cleaned = -0.0521784 Jy ! Component: 150 - total flux cleaned = -0.0513286 Jy ! Component: 200 - total flux cleaned = -0.0513627 Jy ! Total flux subtracted in 200 components = -0.0513627 Jy ! Clean residual min=-0.056671 max=0.048971 Jy/beam ! Clean residual mean=-0.000004 rms=0.010774 Jy/beam ! Combined flux in latest and established models = 4.91782 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 4.91782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.242843Jy sigma=0.595772 ! Fit after self-cal, rms=0.238117Jy sigma=0.590237 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0127295 Jy ! Component: 100 - total flux cleaned = -0.0113972 Jy ! Component: 150 - total flux cleaned = -0.0107833 Jy ! Component: 200 - total flux cleaned = -0.00967298 Jy ! Total flux subtracted in 200 components = -0.00967298 Jy ! Clean residual min=-0.052088 max=0.053979 Jy/beam ! Clean residual mean=-0.000002 rms=0.010611 Jy/beam ! Combined flux in latest and established models = 4.90815 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 91 components and 4.90815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233788Jy sigma=0.588065 ! Fit after self-cal, rms=0.232114Jy sigma=0.587140 ! Inverting map ! Added new window around map position (5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0339507 Jy ! Component: 100 - total flux cleaned = 0.0370428 Jy ! Component: 150 - total flux cleaned = 0.0361791 Jy ! Component: 200 - total flux cleaned = 0.0334582 Jy ! Total flux subtracted in 200 components = 0.0334582 Jy ! Clean residual min=-0.045006 max=0.034760 Jy/beam ! Clean residual mean=-0.000009 rms=0.008647 Jy/beam ! Combined flux in latest and established models = 4.94161 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 105 components and 4.94161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211982Jy sigma=0.552777 ! Fit after self-cal, rms=0.206132Jy sigma=0.544230 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206132Jy sigma=0.544230 ! Fit after self-cal, rms=0.206590Jy sigma=0.538849 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=7.823 mas, bpa=-2.767 degrees ! Estimated noise=4.96426 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0223258 Jy ! Component: 100 - total flux cleaned = -0.0249765 Jy ! Component: 150 - total flux cleaned = -0.0286107 Jy ! Component: 200 - total flux cleaned = -0.0310775 Jy ! Total flux subtracted in 200 components = -0.0310775 Jy ! Clean residual min=-0.041737 max=0.031602 Jy/beam ! Clean residual mean=-0.000007 rms=0.007750 Jy/beam ! Combined flux in latest and established models = 4.91053 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 119 components and 4.91053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197425Jy sigma=0.533215 ! Fit after self-cal, rms=0.194338Jy sigma=0.528254 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00297153 Jy ! Component: 100 - total flux cleaned = -0.00294045 Jy ! Component: 150 - total flux cleaned = -0.00394114 Jy ! Component: 200 - total flux cleaned = -0.00488621 Jy ! Total flux subtracted in 200 components = -0.00488621 Jy ! Clean residual min=-0.038986 max=0.030315 Jy/beam ! Clean residual mean=-0.000005 rms=0.007303 Jy/beam ! Combined flux in latest and established models = 4.90564 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 137 components and 4.90564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189839Jy sigma=0.525456 ! Fit after self-cal, rms=0.188122Jy sigma=0.522660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188122Jy sigma=0.522660 ! Fit after self-cal, rms=0.189031Jy sigma=0.517585 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.746 mas, bmaj=12.98 mas, bpa=0.8415 degrees ! Estimated noise=5.9435 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0281758 Jy ! Component: 100 - total flux cleaned = -0.0412785 Jy ! Component: 150 - total flux cleaned = -0.0468937 Jy ! Component: 200 - total flux cleaned = -0.0505972 Jy ! Total flux subtracted in 200 components = -0.0505972 Jy ! Clean residual min=-0.037556 max=0.023251 Jy/beam ! Clean residual mean=-0.000008 rms=0.008555 Jy/beam ! Combined flux in latest and established models = 4.85505 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 157 components and 4.85504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186661Jy sigma=0.516504 ! Fit after self-cal, rms=0.185670Jy sigma=0.514979 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.76595e-05 Jy ! Component: 100 - total flux cleaned = -0.00190666 Jy ! Component: 150 - total flux cleaned = -0.00276531 Jy ! Component: 200 - total flux cleaned = -0.00356987 Jy ! Total flux subtracted in 200 components = -0.00356987 Jy ! Clean residual min=-0.036677 max=0.022286 Jy/beam ! Clean residual mean=-0.000006 rms=0.008348 Jy/beam ! Combined flux in latest and established models = 4.85147 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 169 components and 4.85147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184794Jy sigma=0.515179 ! Fit after self-cal, rms=0.184406Jy sigma=0.514755 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=7.82 mas, bpa=-2.686 degrees ! Estimated noise=4.94774 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.093 x 7.82 at -2.686 degrees (North through East) ! Clean map min=-0.051701 max=4.3565 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184406Jy sigma=0.514755 ! Fit after self-cal, rms=0.177429Jy sigma=0.351346 ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=7.828 mas, bpa=-2.774 degrees ! Estimated noise=4.96043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00196986 Jy ! Component: 100 - total flux cleaned = -0.00790294 Jy ! Component: 150 - total flux cleaned = -0.00833275 Jy ! Component: 200 - total flux cleaned = -0.00758752 Jy ! Total flux subtracted in 200 components = -0.00758752 Jy ! Clean residual min=-0.032942 max=0.024178 Jy/beam ! Clean residual mean=-0.000013 rms=0.005596 Jy/beam ! Combined flux in latest and established models = 4.84389 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 183 components and 4.84389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173946Jy sigma=0.347439 ! Fit after self-cal, rms=0.173374Jy sigma=0.346004 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000869498 Jy ! Component: 100 - total flux cleaned = 0.00160919 Jy ! Component: 150 - total flux cleaned = 0.00161329 Jy ! Component: 200 - total flux cleaned = 0.00225731 Jy ! Total flux subtracted in 200 components = 0.00225731 Jy ! Clean residual min=-0.031305 max=0.023829 Jy/beam ! Clean residual mean=-0.000013 rms=0.005439 Jy/beam ! Combined flux in latest and established models = 4.84614 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 191 components and 4.84614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171636Jy sigma=0.343869 ! Fit after self-cal, rms=0.171239Jy sigma=0.343010 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171239Jy sigma=0.343010 ! Fit after self-cal, rms=0.170838Jy sigma=0.341354 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.618 mas, bmaj=6.894 mas, bpa=-2.722 degrees ! Estimated noise=8.11443 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.43787 Jy ! Component: 100 - total flux cleaned = 4.18798 Jy ! Component: 150 - total flux cleaned = 4.41378 Jy ! Component: 200 - total flux cleaned = 4.54391 Jy ! Total flux subtracted in 200 components = 4.54391 Jy ! Clean residual min=-0.082958 max=0.073952 Jy/beam ! Clean residual mean=0.000044 rms=0.018456 Jy/beam ! Combined flux in latest and established models = 4.54391 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 4.54391 Jy ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=7.827 mas, bpa=-2.746 degrees ! Estimated noise=4.95803 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11055 Jy ! Component: 100 - total flux cleaned = 0.185636 Jy ! Component: 150 - total flux cleaned = 0.224622 Jy ! Component: 200 - total flux cleaned = 0.250439 Jy ! Total flux subtracted in 200 components = 0.250439 Jy ! Clean residual min=-0.047257 max=0.044323 Jy/beam ! Clean residual mean=0.000004 rms=0.009807 Jy/beam ! Combined flux in latest and established models = 4.79434 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 46 components and 4.79434 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.762 mas, bmaj=12.99 mas, bpa=0.9066 degrees ! Estimated noise=5.94597 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0286185 Jy ! Component: 100 - total flux cleaned = 0.038496 Jy ! Component: 150 - total flux cleaned = 0.041876 Jy ! Component: 200 - total flux cleaned = 0.0453709 Jy ! Total flux subtracted in 200 components = 0.0453709 Jy ! Clean residual min=-0.040087 max=0.022769 Jy/beam ! Clean residual mean=-0.000028 rms=0.008261 Jy/beam ! Combined flux in latest and established models = 4.83971 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235614 Jy ! Component: 100 - total flux cleaned = 0.00289216 Jy ! Component: 150 - total flux cleaned = 0.00289673 Jy ! Component: 200 - total flux cleaned = 0.00248338 Jy ! Total flux subtracted in 200 components = 0.00248338 Jy ! Clean residual min=-0.036427 max=0.021960 Jy/beam ! Clean residual mean=-0.000032 rms=0.007459 Jy/beam ! Combined flux in latest and established models = 4.8422 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 89 components and 4.8422 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=7.827 mas, bpa=-2.746 degrees ! Estimated noise=4.95803 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00794097 Jy ! Component: 100 - total flux cleaned = -0.0057879 Jy ! Component: 150 - total flux cleaned = -0.00189601 Jy ! Component: 200 - total flux cleaned = 0.000775392 Jy ! Total flux subtracted in 200 components = 0.000775392 Jy ! Clean residual min=-0.036718 max=0.028135 Jy/beam ! Clean residual mean=-0.000016 rms=0.007091 Jy/beam ! Combined flux in latest and established models = 4.84297 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 106 components and 4.84297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185860Jy sigma=0.394615 ! Fit after self-cal, rms=0.187384Jy sigma=0.384578 wmodel /g0/scr/pima/npcsb_uvs/J1743-0350_S_map.mod ! Writing 106 model components to file: /g0/scr/pima/npcsb_uvs/J1743-0350_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J1743-0350_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1743-0350_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1743-0350_S_map.win ! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J1743-0350_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.01522 Jy ! Component: 100 - total flux cleaned = -0.0268181 Jy ! Component: 150 - total flux cleaned = -0.0350251 Jy ! Component: 200 - total flux cleaned = -0.0413413 Jy ! Component: 250 - total flux cleaned = -0.0473025 Jy ! Component: 300 - total flux cleaned = -0.0525247 Jy ! Component: 350 - total flux cleaned = -0.0563304 Jy ! Component: 400 - total flux cleaned = -0.0603252 Jy ! Component: 450 - total flux cleaned = -0.0641415 Jy ! Component: 500 - total flux cleaned = -0.0677991 Jy ! Component: 550 - total flux cleaned = -0.0706627 Jy ! Component: 600 - total flux cleaned = -0.0734191 Jy ! Component: 650 - total flux cleaned = -0.076658 Jy ! Component: 700 - total flux cleaned = -0.0786476 Jy ! Component: 750 - total flux cleaned = -0.0813964 Jy ! Component: 800 - total flux cleaned = -0.0824583 Jy ! Component: 850 - total flux cleaned = -0.0839994 Jy ! Component: 900 - total flux cleaned = -0.0857346 Jy ! Component: 950 - total flux cleaned = -0.0869343 Jy ! Component: 1000 - total flux cleaned = -0.0887982 Jy ! Component: 1050 - total flux cleaned = -0.0901516 Jy ! Component: 1100 - total flux cleaned = -0.0916842 Jy ! Component: 1150 - total flux cleaned = -0.0931829 Jy ! Component: 1200 - total flux cleaned = -0.0952623 Jy ! Component: 1250 - total flux cleaned = -0.097285 Jy ! Component: 1300 - total flux cleaned = -0.0992567 Jy ! Component: 1350 - total flux cleaned = -0.101366 Jy ! Component: 1400 - total flux cleaned = -0.103227 Jy ! Component: 1450 - total flux cleaned = -0.104681 Jy ! Component: 1500 - total flux cleaned = -0.10592 Jy ! Component: 1550 - total flux cleaned = -0.107644 Jy ! Component: 1600 - total flux cleaned = -0.108317 Jy ! Component: 1650 - total flux cleaned = -0.109144 Jy ! Component: 1700 - total flux cleaned = -0.110424 Jy ! Component: 1750 - total flux cleaned = -0.111206 Jy ! Component: 1800 - total flux cleaned = -0.111966 Jy ! Component: 1850 - total flux cleaned = -0.112557 Jy ! Component: 1900 - total flux cleaned = -0.11314 Jy ! Component: 1950 - total flux cleaned = -0.113567 Jy ! Component: 2000 - total flux cleaned = -0.114403 Jy ! Component: 2050 - total flux cleaned = -0.114814 Jy ! Component: 2100 - total flux cleaned = -0.115742 Jy ! Component: 2150 - total flux cleaned = -0.116261 Jy ! Component: 2200 - total flux cleaned = -0.116896 Jy ! Component: 2250 - total flux cleaned = -0.117393 Jy ! Component: 2300 - total flux cleaned = -0.117878 Jy ! Component: 2350 - total flux cleaned = -0.118591 Jy ! Component: 2400 - total flux cleaned = -0.118824 Jy ! Component: 2450 - total flux cleaned = -0.11928 Jy ! Component: 2500 - total flux cleaned = -0.11984 Jy ! Component: 2550 - total flux cleaned = -0.120277 Jy ! Component: 2600 - total flux cleaned = -0.120705 Jy ! Component: 2650 - total flux cleaned = -0.121443 Jy ! Component: 2700 - total flux cleaned = -0.121755 Jy ! Component: 2750 - total flux cleaned = -0.122364 Jy ! Component: 2800 - total flux cleaned = -0.123261 Jy ! Component: 2850 - total flux cleaned = -0.123946 Jy ! Component: 2900 - total flux cleaned = -0.124619 Jy ! Component: 2950 - total flux cleaned = -0.125563 Jy ! Component: 3000 - total flux cleaned = -0.125936 Jy ! Component: 3050 - total flux cleaned = -0.126847 Jy ! Component: 3100 - total flux cleaned = -0.127293 Jy ! Component: 3150 - total flux cleaned = -0.128435 Jy ! Component: 3200 - total flux cleaned = -0.128779 Jy ! Component: 3250 - total flux cleaned = -0.129288 Jy ! Component: 3300 - total flux cleaned = -0.129873 Jy ! Component: 3350 - total flux cleaned = -0.13012 Jy ! Component: 3400 - total flux cleaned = -0.130605 Jy ! Component: 3450 - total flux cleaned = -0.130921 Jy ! Component: 3500 - total flux cleaned = -0.130999 Jy ! Component: 3550 - total flux cleaned = -0.131307 Jy ! Component: 3600 - total flux cleaned = -0.131308 Jy ! Component: 3650 - total flux cleaned = -0.131233 Jy ! Component: 3700 - total flux cleaned = -0.131085 Jy ! Component: 3750 - total flux cleaned = -0.131014 Jy ! Component: 3800 - total flux cleaned = -0.131015 Jy ! Component: 3850 - total flux cleaned = -0.131155 Jy ! Component: 3900 - total flux cleaned = -0.130739 Jy ! Component: 3950 - total flux cleaned = -0.130877 Jy ! Component: 4000 - total flux cleaned = -0.130811 Jy ! Component: 4050 - total flux cleaned = -0.130678 Jy ! Total flux subtracted in 4096 components = -0.130743 Jy ! Clean residual min=-0.003585 max=0.003332 Jy/beam ! Clean residual mean=-0.000000 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 4.71223 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 373 components and 4.71223 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1743-0350_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.095 x 7.827 at -2.746 degrees (North through East) ! Clean map min=-0.038649 max=4.3889 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1743-0350_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 4.38891 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00115005 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0786106 0.0786106 0.157221 0.314443 0.628885 1.25777 2.51554 5.03108 10.0622 20.1243 40.2486 80.4973 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0034 print "peak=",int(1000*peak_flux)/1000 ! peak= 4.388 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1743-0350_S_uvs.log closed on Wed Sep 25 00:12:49 2013