! Started logfile: /g0/scr/pima/npcsb_uvs/J1725+7726_S_uvs.log on Wed Sep 25 00:12:40 2013 obs /g0/scr/pima/npcsb_uvs/J1725+7726_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1725+7726_S_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.835062 visibilities/baseline/integration-bin. ! Found source: J1725+7726 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23693e+09 8e+06 1 8e+06 ! 02 2 2.26693e+09 8e+06 1 8e+06 ! 03 3 2.35693e+09 8e+06 1 8e+06 ! 04 4 2.37693e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 6764 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1725+7726_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.021498Jy sigma=2.092956 ! Fit after self-cal, rms=0.916204Jy sigma=1.862622 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.454 mas, bmaj=10.53 mas, bpa=-0.8858 degrees ! Estimated noise=8.86011 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0583667 Jy ! Component: 100 - total flux cleaned = 0.078935 Jy ! Total flux subtracted in 100 components = 0.078935 Jy ! Clean residual min=-0.012552 max=0.017500 Jy/beam ! Clean residual mean=0.000089 rms=0.003863 Jy/beam ! Combined flux in latest and established models = 0.078935 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.078935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161390Jy sigma=0.317325 ! Fit after self-cal, rms=0.160042Jy sigma=0.314653 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=10.34 mas, bpa=-1.62 degrees ! Estimated noise=4.36059 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0415827 Jy ! Component: 100 - total flux cleaned = 0.0705955 Jy ! Component: 150 - total flux cleaned = 0.091831 Jy ! Component: 200 - total flux cleaned = 0.10773 Jy ! Total flux subtracted in 200 components = 0.10773 Jy ! Clean residual min=-0.021690 max=0.033232 Jy/beam ! Clean residual mean=0.000339 rms=0.009478 Jy/beam ! Combined flux in latest and established models = 0.186665 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 67 components and 0.186665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146076Jy sigma=0.283886 ! Fit after self-cal, rms=0.145101Jy sigma=0.281640 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.59 HN 0.96 KP 0.73 ! LA 0.69 MK 1.15 NL 1.58 OV 3.05 ! PT 0.54 SC 1.64 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.49 HN 0.82 KP 0.74 ! LA 0.62 MK 1.09 NL 1.48 OV 3.70 ! PT 0.55 SC 1.31 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.46 HN 0.90 KP 0.82 ! LA 0.55 MK 1.13 NL 1.72 OV 2.89 ! PT 0.57 SC 1.24 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.43 HN 0.80 KP 0.73 ! LA 0.50 MK 1.11 NL 1.39 OV 2.42 ! PT 0.50 SC 1.42 ! ! ! Fit before self-cal, rms=0.145101Jy sigma=0.281640 ! Fit after self-cal, rms=0.214510Jy sigma=0.221624 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.334 mas, bmaj=10.03 mas, bpa=-2.767 degrees ! Estimated noise=4.3093 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187145 Jy ! Component: 100 - total flux cleaned = 0.00253128 Jy ! Component: 150 - total flux cleaned = 0.00263839 Jy ! Component: 200 - total flux cleaned = 0.00246329 Jy ! Total flux subtracted in 200 components = 0.00246329 Jy ! Clean residual min=-0.011786 max=0.019375 Jy/beam ! Clean residual mean=0.000023 rms=0.004123 Jy/beam ! Combined flux in latest and established models = 0.189128 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 75 components and 0.189128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214273Jy sigma=0.221369 ! Fit after self-cal, rms=0.221946Jy sigma=0.215793 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221946Jy sigma=0.215793 ! Fit after self-cal, rms=0.240633Jy sigma=0.215509 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=9.936 mas, bpa=-3.47 degrees ! Estimated noise=4.3233 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000826143 Jy ! Component: 100 - total flux cleaned = 0.00135842 Jy ! Component: 150 - total flux cleaned = 0.00144878 Jy ! Component: 200 - total flux cleaned = 0.00137157 Jy ! Total flux subtracted in 200 components = 0.00137157 Jy ! Clean residual min=-0.012122 max=0.016056 Jy/beam ! Clean residual mean=0.000036 rms=0.004142 Jy/beam ! Combined flux in latest and established models = 0.1905 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.1905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240484Jy sigma=0.215186 ! Fit after self-cal, rms=0.240870Jy sigma=0.215087 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.0884e-05 Jy ! Component: 100 - total flux cleaned = -0.000108586 Jy ! Component: 150 - total flux cleaned = -0.00032674 Jy ! Component: 200 - total flux cleaned = -0.000521853 Jy ! Total flux subtracted in 200 components = -0.000521853 Jy ! Clean residual min=-0.012413 max=0.016487 Jy/beam ! Clean residual mean=0.000042 rms=0.004194 Jy/beam ! Combined flux in latest and established models = 0.189978 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 87 components and 0.189978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240738Jy sigma=0.215048 ! Fit after self-cal, rms=0.240776Jy sigma=0.215008 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240776Jy sigma=0.215008 ! Fit after self-cal, rms=0.237024Jy sigma=0.214872 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=9.868 mas, bpa=-4.012 degrees ! Estimated noise=4.1994 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.29913e-06 Jy ! Component: 100 - total flux cleaned = -1.34346e-05 Jy ! Component: 150 - total flux cleaned = -6.71189e-06 Jy ! Component: 200 - total flux cleaned = -6.60683e-05 Jy ! Total flux subtracted in 200 components = -6.60683e-05 Jy ! Clean residual min=-0.011995 max=0.015924 Jy/beam ! Clean residual mean=0.000041 rms=0.004077 Jy/beam ! Combined flux in latest and established models = 0.189912 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 89 components and 0.189912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236891Jy sigma=0.214838 ! Fit after self-cal, rms=0.236955Jy sigma=0.214790 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240212 Jy ! Component: 100 - total flux cleaned = 0.000182628 Jy ! Component: 150 - total flux cleaned = 1.28743e-05 Jy ! Component: 200 - total flux cleaned = -0.000140111 Jy ! Total flux subtracted in 200 components = -0.000140111 Jy ! Clean residual min=-0.012038 max=0.016157 Jy/beam ! Clean residual mean=0.000043 rms=0.004094 Jy/beam ! Combined flux in latest and established models = 0.189772 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 92 components and 0.189772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236852Jy sigma=0.214809 ! Fit after self-cal, rms=0.236930Jy sigma=0.214763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236930Jy sigma=0.214763 ! Fit after self-cal, rms=0.233251Jy sigma=0.214674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.501 mas, bmaj=11.71 mas, bpa=-9.493 degrees ! Estimated noise=4.91712 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.81993e-05 Jy ! Component: 100 - total flux cleaned = -9.74491e-05 Jy ! Component: 150 - total flux cleaned = -0.000215283 Jy ! Component: 200 - total flux cleaned = -0.00026724 Jy ! Total flux subtracted in 200 components = -0.00026724 Jy ! Clean residual min=-0.020234 max=0.024021 Jy/beam ! Clean residual mean=0.000083 rms=0.007220 Jy/beam ! Combined flux in latest and established models = 0.189505 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 97 components and 0.189505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233155Jy sigma=0.214856 ! Fit after self-cal, rms=0.233176Jy sigma=0.214814 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.24894e-05 Jy ! Component: 100 - total flux cleaned = -2.47671e-05 Jy ! Component: 150 - total flux cleaned = -0.000127836 Jy ! Component: 200 - total flux cleaned = -8.06956e-05 Jy ! Total flux subtracted in 200 components = -8.06956e-05 Jy ! Clean residual min=-0.020521 max=0.024210 Jy/beam ! Clean residual mean=0.000086 rms=0.007244 Jy/beam ! Combined flux in latest and established models = 0.189424 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 102 components and 0.189424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233124Jy sigma=0.215021 ! Fit after self-cal, rms=0.233129Jy sigma=0.214994 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=9.831 mas, bpa=-4.382 degrees ! Estimated noise=4.09217 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 9.831 at -4.382 degrees (North through East) ! Clean map min=-0.012123 max=0.092397 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.389 mas, bmaj=9.732 mas, bpa=-2.999 degrees ! Estimated noise=9.02248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0561578 Jy ! Component: 100 - total flux cleaned = 0.0837961 Jy ! Component: 150 - total flux cleaned = 0.104149 Jy ! Component: 200 - total flux cleaned = 0.119722 Jy ! Total flux subtracted in 200 components = 0.119722 Jy ! Clean residual min=-0.014377 max=0.023282 Jy/beam ! Clean residual mean=0.000053 rms=0.003621 Jy/beam ! Combined flux in latest and established models = 0.119722 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.119722 Jy ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=9.831 mas, bpa=-4.382 degrees ! Estimated noise=4.09217 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0270122 Jy ! Component: 100 - total flux cleaned = 0.0438648 Jy ! Component: 150 - total flux cleaned = 0.0550647 Jy ! Component: 200 - total flux cleaned = 0.0601892 Jy ! Total flux subtracted in 200 components = 0.0601892 Jy ! Clean residual min=-0.012901 max=0.014813 Jy/beam ! Clean residual mean=0.000061 rms=0.003957 Jy/beam ! Combined flux in latest and established models = 0.179911 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 0.179911 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.501 mas, bmaj=11.71 mas, bpa=-9.493 degrees ! Estimated noise=4.91712 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00536646 Jy ! Component: 100 - total flux cleaned = 0.00644427 Jy ! Component: 150 - total flux cleaned = 0.00665077 Jy ! Component: 200 - total flux cleaned = 0.0066471 Jy ! Total flux subtracted in 200 components = 0.0066471 Jy ! Clean residual min=-0.020625 max=0.023251 Jy/beam ! Clean residual mean=0.000101 rms=0.007052 Jy/beam ! Combined flux in latest and established models = 0.186558 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.27326e-07 Jy ! Component: 100 - total flux cleaned = 0.000158266 Jy ! Component: 150 - total flux cleaned = 1.07905e-05 Jy ! Component: 200 - total flux cleaned = 1.35423e-05 Jy ! Total flux subtracted in 200 components = 1.35423e-05 Jy ! Clean residual min=-0.020474 max=0.023414 Jy/beam ! Clean residual mean=0.000100 rms=0.007047 Jy/beam ! Combined flux in latest and established models = 0.186571 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 82 components and 0.186571 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=9.831 mas, bpa=-4.382 degrees ! Estimated noise=4.09217 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133784 Jy ! Component: 100 - total flux cleaned = -0.00117061 Jy ! Component: 150 - total flux cleaned = -0.000735725 Jy ! Component: 200 - total flux cleaned = -0.000870504 Jy ! Total flux subtracted in 200 components = -0.000870504 Jy ! Clean residual min=-0.013371 max=0.015683 Jy/beam ! Clean residual mean=0.000050 rms=0.003852 Jy/beam ! Combined flux in latest and established models = 0.185701 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 101 components and 0.185701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229054Jy sigma=0.212591 ! Fit after self-cal, rms=0.225297Jy sigma=0.210329 wmodel /g0/scr/pima/npcsb_uvs/J1725+7726_S_map.mod ! Writing 101 model components to file: /g0/scr/pima/npcsb_uvs/J1725+7726_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J1725+7726_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1725+7726_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1725+7726_S_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J1725+7726_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618363 Jy ! Component: 100 - total flux cleaned = 0.00710319 Jy ! Component: 150 - total flux cleaned = 0.00819449 Jy ! Component: 200 - total flux cleaned = 0.00840327 Jy ! Component: 250 - total flux cleaned = 0.00881029 Jy ! Component: 300 - total flux cleaned = 0.00881235 Jy ! Component: 350 - total flux cleaned = 0.00919087 Jy ! Component: 400 - total flux cleaned = 0.00937914 Jy ! Component: 450 - total flux cleaned = 0.00956137 Jy ! Component: 500 - total flux cleaned = 0.0104239 Jy ! Component: 550 - total flux cleaned = 0.0105926 Jy ! Component: 600 - total flux cleaned = 0.0109221 Jy ! Component: 650 - total flux cleaned = 0.0107633 Jy ! Component: 700 - total flux cleaned = 0.0112364 Jy ! Component: 750 - total flux cleaned = 0.0110835 Jy ! Component: 800 - total flux cleaned = 0.0112352 Jy ! Component: 850 - total flux cleaned = 0.0116789 Jy ! Component: 900 - total flux cleaned = 0.0118199 Jy ! Component: 950 - total flux cleaned = 0.0118188 Jy ! Component: 1000 - total flux cleaned = 0.0121015 Jy ! Component: 1050 - total flux cleaned = 0.0123792 Jy ! Component: 1100 - total flux cleaned = 0.0129268 Jy ! Component: 1150 - total flux cleaned = 0.0133299 Jy ! Component: 1200 - total flux cleaned = 0.0135927 Jy ! Component: 1250 - total flux cleaned = 0.0135918 Jy ! Component: 1300 - total flux cleaned = 0.0137199 Jy ! Component: 1350 - total flux cleaned = 0.0139718 Jy ! Component: 1400 - total flux cleaned = 0.0142217 Jy ! Component: 1450 - total flux cleaned = 0.0145882 Jy ! Component: 1500 - total flux cleaned = 0.014223 Jy ! Component: 1550 - total flux cleaned = 0.0143453 Jy ! Component: 1600 - total flux cleaned = 0.0147018 Jy ! Component: 1650 - total flux cleaned = 0.0147034 Jy ! Component: 1700 - total flux cleaned = 0.0151634 Jy ! Component: 1750 - total flux cleaned = 0.0151626 Jy ! Component: 1800 - total flux cleaned = 0.0151627 Jy ! Component: 1850 - total flux cleaned = 0.0151618 Jy ! Component: 1900 - total flux cleaned = 0.0153807 Jy ! Component: 1950 - total flux cleaned = 0.0152735 Jy ! Component: 2000 - total flux cleaned = 0.0156995 Jy ! Component: 2050 - total flux cleaned = 0.0158052 Jy ! Component: 2100 - total flux cleaned = 0.0160135 Jy ! Component: 2150 - total flux cleaned = 0.0162201 Jy ! Component: 2200 - total flux cleaned = 0.0165266 Jy ! Component: 2250 - total flux cleaned = 0.0167273 Jy ! Component: 2300 - total flux cleaned = 0.0165304 Jy ! Component: 2350 - total flux cleaned = 0.0169237 Jy ! Component: 2400 - total flux cleaned = 0.017118 Jy ! Component: 2450 - total flux cleaned = 0.0175023 Jy ! Component: 2500 - total flux cleaned = 0.0175008 Jy ! Component: 2550 - total flux cleaned = 0.017313 Jy ! Component: 2600 - total flux cleaned = 0.0175933 Jy ! Component: 2650 - total flux cleaned = 0.0179603 Jy ! Component: 2700 - total flux cleaned = 0.0182324 Jy ! Component: 2750 - total flux cleaned = 0.0184113 Jy ! Component: 2800 - total flux cleaned = 0.0184112 Jy ! Component: 2850 - total flux cleaned = 0.0187641 Jy ! Component: 2900 - total flux cleaned = 0.019025 Jy ! Component: 2950 - total flux cleaned = 0.019025 Jy ! Component: 3000 - total flux cleaned = 0.0191954 Jy ! Component: 3050 - total flux cleaned = 0.0191113 Jy ! Component: 3100 - total flux cleaned = 0.0194466 Jy ! Component: 3150 - total flux cleaned = 0.019612 Jy ! Component: 3200 - total flux cleaned = 0.0196122 Jy ! Component: 3250 - total flux cleaned = 0.0197747 Jy ! Component: 3300 - total flux cleaned = 0.0200144 Jy ! Component: 3350 - total flux cleaned = 0.0200934 Jy ! Component: 3400 - total flux cleaned = 0.0201718 Jy ! Component: 3450 - total flux cleaned = 0.0203273 Jy ! Component: 3500 - total flux cleaned = 0.0203272 Jy ! Component: 3550 - total flux cleaned = 0.0202509 Jy ! Component: 3600 - total flux cleaned = 0.0204779 Jy ! Component: 3650 - total flux cleaned = 0.0205531 Jy ! Component: 3700 - total flux cleaned = 0.0206278 Jy ! Component: 3750 - total flux cleaned = 0.0205553 Jy ! Component: 3800 - total flux cleaned = 0.0207014 Jy ! Component: 3850 - total flux cleaned = 0.0208455 Jy ! Component: 3900 - total flux cleaned = 0.0208444 Jy ! Component: 3950 - total flux cleaned = 0.0207735 Jy ! Component: 4000 - total flux cleaned = 0.0208428 Jy ! Component: 4050 - total flux cleaned = 0.0208424 Jy ! Total flux subtracted in 4096 components = 0.0206344 Jy ! Clean residual min=-0.003984 max=0.003437 Jy/beam ! Clean residual mean=0.000023 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 0.206335 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 417 components and 0.206335 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1725+7726_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 9.831 at -4.382 degrees (North through East) ! Clean map min=-0.014616 max=0.089955 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1725+7726_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0899552 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00134019 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.46951 4.46951 8.93903 17.8781 35.7561 71.5122 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.089 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1725+7726_S_uvs.log closed on Wed Sep 25 00:12:44 2013