! Started logfile: /g0/scr/pima/npcsb_uvs/J1705+7756_X_uvs.log on Wed Sep 25 00:06:52 2013
obs /g0/scr/pima/npcsb_uvs/J1705+7756_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1705+7756_X_uva.fits
! AN table 1: 47 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.892435 visibilities/baseline/integration-bin.
! Found source: J1705+7756
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40993e+09        8e+06          1        8e+06
!  02        2  8.47993e+09        8e+06          1        8e+06
!  03        3  8.79493e+09        8e+06          1        8e+06
!  04        4  8.89993e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6040 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1705+7756_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003992Jy  sigma=2.256087
! Fit after  self-cal, rms=0.948194Jy  sigma=2.127268
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.71 mas, bmaj=2.58 mas, bpa=5.825 degrees
! Estimated noise=7.40936 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.042705 Jy
! Component: 100  -  total flux cleaned = 0.0525506 Jy
! Total flux subtracted in 100 components = 0.0525506 Jy
! Clean residual min=-0.006618 max=0.007428 Jy/beam
! Clean residual mean=-0.000010 rms=0.001639 Jy/beam
! Combined flux in latest and established models = 0.0525506 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0525506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093560Jy  sigma=0.190858
! Fit after  self-cal, rms=0.091237Jy  sigma=0.185315
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8814 mas, bmaj=2.645 mas, bpa=4.334 degrees
! Estimated noise=4.14434 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105018 Jy
! Component: 100  -  total flux cleaned = 0.0154023 Jy
! Component: 150  -  total flux cleaned = 0.018085 Jy
! Component: 200  -  total flux cleaned = 0.0198014 Jy
! Total flux subtracted in 200 components = 0.0198014 Jy
! Clean residual min=-0.005292 max=0.006505 Jy/beam
! Clean residual mean=-0.000008 rms=0.001391 Jy/beam
! Combined flux in latest and established models = 0.072352 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.072352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090231Jy  sigma=0.182290
! Fit after  self-cal, rms=0.090108Jy  sigma=0.181902
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.92     HN        1.09     KP        1.03     
!   LA        0.99     MK        1.11     OV        1.19     PT        0.90     
!   SC        1.19     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        1.00     HN        1.16     KP        1.01     
!   LA        0.88     MK        0.98     OV        1.27     PT        0.94     
!   SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.09     KP        0.93     
!   LA        0.95     MK        0.94     OV        1.14     PT        0.89     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        0.93     KP        0.95     
!   LA        0.83     MK        0.85     OV        1.21     PT        1.11     
!   SC        0.88     
! 
! 
! Fit before self-cal, rms=0.090108Jy  sigma=0.181902
! Fit after  self-cal, rms=0.092726Jy  sigma=0.180824
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8848 mas, bmaj=2.642 mas, bpa=4.949 degrees
! Estimated noise=4.06525 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128503 Jy
! Component: 100  -  total flux cleaned = 0.00138963 Jy
! Component: 150  -  total flux cleaned = 0.00135395 Jy
! Component: 200  -  total flux cleaned = 0.00132236 Jy
! Total flux subtracted in 200 components = 0.00132236 Jy
! Clean residual min=-0.005472 max=0.006013 Jy/beam
! Clean residual mean=0.000003 rms=0.001255 Jy/beam
! Combined flux in latest and established models = 0.0736744 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 0.0736744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092663Jy  sigma=0.180734
! Fit after  self-cal, rms=0.092845Jy  sigma=0.180504
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092845Jy  sigma=0.180504
! Fit after  self-cal, rms=0.093060Jy  sigma=0.180440
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8764 mas, bmaj=2.643 mas, bpa=5.205 degrees
! Estimated noise=4.0135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000957847 Jy
! Component: 100  -  total flux cleaned = 0.00118318 Jy
! Component: 150  -  total flux cleaned = 0.00122289 Jy
! Component: 200  -  total flux cleaned = 0.00119221 Jy
! Total flux subtracted in 200 components = 0.00119221 Jy
! Clean residual min=-0.005429 max=0.006084 Jy/beam
! Clean residual mean=0.000005 rms=0.001264 Jy/beam
! Combined flux in latest and established models = 0.0748666 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 24 components and 0.0748666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093003Jy  sigma=0.180378
! Fit after  self-cal, rms=0.093032Jy  sigma=0.180331
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, -15.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00257738 Jy
! Component: 100  -  total flux cleaned = 0.00203059 Jy
! Component: 150  -  total flux cleaned = 0.00141941 Jy
! Component: 200  -  total flux cleaned = 0.00100935 Jy
! Total flux subtracted in 200 components = 0.00100935 Jy
! Clean residual min=-0.005115 max=0.004323 Jy/beam
! Clean residual mean=0.000004 rms=0.001094 Jy/beam
! Combined flux in latest and established models = 0.0758759 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 40 components and 0.0758759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092437Jy  sigma=0.179179
! Fit after  self-cal, rms=0.092257Jy  sigma=0.178817
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092257Jy  sigma=0.178817
! Fit after  self-cal, rms=0.088600Jy  sigma=0.178708
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8633 mas, bmaj=2.64 mas, bpa=5.099 degrees
! Estimated noise=3.90539 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180723 Jy
! Component: 100  -  total flux cleaned = 0.00179142 Jy
! Component: 150  -  total flux cleaned = 0.00179498 Jy
! Component: 200  -  total flux cleaned = 0.00160857 Jy
! Total flux subtracted in 200 components = 0.00160857 Jy
! Clean residual min=-0.005006 max=0.004262 Jy/beam
! Clean residual mean=0.000002 rms=0.001099 Jy/beam
! Combined flux in latest and established models = 0.0774845 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 47 components and 0.0774845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088215Jy  sigma=0.178046
! Fit after  self-cal, rms=0.088125Jy  sigma=0.177892
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000756314 Jy
! Component: 100  -  total flux cleaned = 0.000460393 Jy
! Component: 150  -  total flux cleaned = -7.7151e-05 Jy
! Component: 200  -  total flux cleaned = -0.000487518 Jy
! Total flux subtracted in 200 components = -0.000487518 Jy
! Clean residual min=-0.004952 max=0.004247 Jy/beam
! Clean residual mean=0.000002 rms=0.001109 Jy/beam
! Combined flux in latest and established models = 0.076997 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 54 components and 0.076997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087888Jy  sigma=0.177500
! Fit after  self-cal, rms=0.087830Jy  sigma=0.177432
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087830Jy  sigma=0.177432
! Fit after  self-cal, rms=0.086039Jy  sigma=0.177348
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.231 mas, bmaj=3.338 mas, bpa=20.29 degrees
! Estimated noise=5.22484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000398884 Jy
! Component: 100  -  total flux cleaned = 0.000135219 Jy
! Component: 150  -  total flux cleaned = -0.00033079 Jy
! Component: 200  -  total flux cleaned = -0.000631896 Jy
! Total flux subtracted in 200 components = -0.000631896 Jy
! Clean residual min=-0.004971 max=0.005545 Jy/beam
! Clean residual mean=-0.000005 rms=0.001633 Jy/beam
! Combined flux in latest and established models = 0.0763651 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 63 components and 0.0763651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085883Jy  sigma=0.177177
! Fit after  self-cal, rms=0.085766Jy  sigma=0.177034
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000316023 Jy
! Component: 100  -  total flux cleaned = -0.000617129 Jy
! Component: 150  -  total flux cleaned = -0.000797431 Jy
! Component: 200  -  total flux cleaned = -0.001042 Jy
! Total flux subtracted in 200 components = -0.001042 Jy
! Clean residual min=-0.004752 max=0.005541 Jy/beam
! Clean residual mean=-0.000006 rms=0.001616 Jy/beam
! Combined flux in latest and established models = 0.0753231 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 72 components and 0.0753231 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085700Jy  sigma=0.177036
! Fit after  self-cal, rms=0.085640Jy  sigma=0.176966
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8562 mas, bmaj=2.64 mas, bpa=5.138 degrees
! Estimated noise=3.85769 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8562 x 2.64 at 5.138 degrees (North through East)
! Clean map  min=-0.011062  max=0.055565 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6953 mas, bmaj=2.609 mas, bpa=6.63 degrees
! Estimated noise=6.6988 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0386057 Jy
! Component: 100  -  total flux cleaned = 0.049147 Jy
! Component: 150  -  total flux cleaned = 0.055225 Jy
! Component: 200  -  total flux cleaned = 0.060337 Jy
! Total flux subtracted in 200 components = 0.060337 Jy
! Clean residual min=-0.008028 max=0.008918 Jy/beam
! Clean residual mean=-0.000010 rms=0.001756 Jy/beam
! Combined flux in latest and established models = 0.0603369 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0603369 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8562 mas, bmaj=2.64 mas, bpa=5.138 degrees
! Estimated noise=3.85769 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, -3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00772539 Jy
! Component: 100  -  total flux cleaned = 0.0121418 Jy
! Component: 150  -  total flux cleaned = 0.0135082 Jy
! Component: 200  -  total flux cleaned = 0.0145008 Jy
! Total flux subtracted in 200 components = 0.0145008 Jy
! Clean residual min=-0.005822 max=0.004501 Jy/beam
! Clean residual mean=-0.000006 rms=0.001320 Jy/beam
! Combined flux in latest and established models = 0.0748377 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 37 components and 0.0748377 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.231 mas, bmaj=3.338 mas, bpa=20.29 degrees
! Estimated noise=5.22484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000650485 Jy
! Component: 100  -  total flux cleaned = -0.00067131 Jy
! Component: 150  -  total flux cleaned = -0.000669575 Jy
! Component: 200  -  total flux cleaned = -0.000841041 Jy
! Total flux subtracted in 200 components = -0.000841041 Jy
! Clean residual min=-0.006148 max=0.004866 Jy/beam
! Clean residual mean=-0.000010 rms=0.001589 Jy/beam
! Combined flux in latest and established models = 0.0739967 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000288016 Jy
! Component: 100  -  total flux cleaned = -0.000530548 Jy
! Component: 150  -  total flux cleaned = -0.000743029 Jy
! Component: 200  -  total flux cleaned = -0.000841351 Jy
! Total flux subtracted in 200 components = -0.000841351 Jy
! Clean residual min=-0.005074 max=0.004621 Jy/beam
! Clean residual mean=-0.000008 rms=0.001383 Jy/beam
! Combined flux in latest and established models = 0.0731553 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 81 components and 0.0731553 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8562 mas, bmaj=2.64 mas, bpa=5.138 degrees
! Estimated noise=3.85769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00105171 Jy
! Component: 100  -  total flux cleaned = -0.00250695 Jy
! Component: 150  -  total flux cleaned = -0.00230616 Jy
! Component: 200  -  total flux cleaned = -0.00204588 Jy
! Total flux subtracted in 200 components = -0.00204588 Jy
! Clean residual min=-0.003586 max=0.003292 Jy/beam
! Clean residual mean=-0.000005 rms=0.000906 Jy/beam
! Combined flux in latest and established models = 0.0711095 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 98 components and 0.0711094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085171Jy  sigma=0.176144
! Fit after  self-cal, rms=0.085004Jy  sigma=0.175651
wmodel /g0/scr/pima/npcsb_uvs/J1705+7756_X_map.mod
! Writing 98 model components to file: /g0/scr/pima/npcsb_uvs/J1705+7756_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1705+7756_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1705+7756_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1705+7756_X_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J1705+7756_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00115616 Jy
! Component: 100  -  total flux cleaned = -0.00208384 Jy
! Component: 150  -  total flux cleaned = -0.00312817 Jy
! Component: 200  -  total flux cleaned = -0.00362441 Jy
! Component: 250  -  total flux cleaned = -0.00399118 Jy
! Component: 300  -  total flux cleaned = -0.00429264 Jy
! Component: 350  -  total flux cleaned = -0.0042926 Jy
! Component: 400  -  total flux cleaned = -0.0044336 Jy
! Component: 450  -  total flux cleaned = -0.00466153 Jy
! Component: 500  -  total flux cleaned = -0.00483861 Jy
! Component: 550  -  total flux cleaned = -0.00501275 Jy
! Component: 600  -  total flux cleaned = -0.00522433 Jy
! Component: 650  -  total flux cleaned = -0.00538962 Jy
! Component: 700  -  total flux cleaned = -0.00547008 Jy
! Component: 750  -  total flux cleaned = -0.00558906 Jy
! Component: 800  -  total flux cleaned = -0.00551078 Jy
! Component: 850  -  total flux cleaned = -0.00551026 Jy
! Component: 900  -  total flux cleaned = -0.00547247 Jy
! Component: 950  -  total flux cleaned = -0.00539952 Jy
! Component: 1000  -  total flux cleaned = -0.00532716 Jy
! Component: 1050  -  total flux cleaned = -0.00522039 Jy
! Component: 1100  -  total flux cleaned = -0.00511453 Jy
! Component: 1150  -  total flux cleaned = -0.00490684 Jy
! Component: 1200  -  total flux cleaned = -0.00477027 Jy
! Component: 1250  -  total flux cleaned = -0.00463551 Jy
! Component: 1300  -  total flux cleaned = -0.00456867 Jy
! Component: 1350  -  total flux cleaned = -0.00430721 Jy
! Component: 1400  -  total flux cleaned = -0.00424304 Jy
! Component: 1450  -  total flux cleaned = -0.00411533 Jy
! Component: 1500  -  total flux cleaned = -0.00395801 Jy
! Component: 1550  -  total flux cleaned = -0.00374061 Jy
! Component: 1600  -  total flux cleaned = -0.00361783 Jy
! Component: 1650  -  total flux cleaned = -0.00352652 Jy
! Component: 1700  -  total flux cleaned = -0.00334625 Jy
! Component: 1750  -  total flux cleaned = -0.00316915 Jy
! Component: 1800  -  total flux cleaned = -0.00308119 Jy
! Component: 1850  -  total flux cleaned = -0.00305229 Jy
! Component: 1900  -  total flux cleaned = -0.00296571 Jy
! Component: 1950  -  total flux cleaned = -0.00285198 Jy
! Component: 2000  -  total flux cleaned = -0.00285216 Jy
! Component: 2050  -  total flux cleaned = -0.00276859 Jy
! Component: 2100  -  total flux cleaned = -0.00268573 Jy
! Component: 2150  -  total flux cleaned = -0.00271331 Jy
! Component: 2200  -  total flux cleaned = -0.00252405 Jy
! Component: 2250  -  total flux cleaned = -0.00247033 Jy
! Component: 2300  -  total flux cleaned = -0.00241721 Jy
! Component: 2350  -  total flux cleaned = -0.00239131 Jy
! Component: 2400  -  total flux cleaned = -0.00233908 Jy
! Component: 2450  -  total flux cleaned = -0.00226142 Jy
! Component: 2500  -  total flux cleaned = -0.00218449 Jy
! Component: 2550  -  total flux cleaned = -0.00205759 Jy
! Component: 2600  -  total flux cleaned = -0.00198199 Jy
! Component: 2650  -  total flux cleaned = -0.00200664 Jy
! Component: 2700  -  total flux cleaned = -0.0018821 Jy
! Component: 2750  -  total flux cleaned = -0.00170962 Jy
! Component: 2800  -  total flux cleaned = -0.00158724 Jy
! Component: 2850  -  total flux cleaned = -0.00141724 Jy
! Component: 2900  -  total flux cleaned = -0.00134505 Jy
! Component: 2950  -  total flux cleaned = -0.00129721 Jy
! Component: 3000  -  total flux cleaned = -0.00117809 Jy
! Component: 3050  -  total flux cleaned = -0.00101262 Jy
! Component: 3100  -  total flux cleaned = -0.00091893 Jy
! Component: 3150  -  total flux cleaned = -0.000872373 Jy
! Component: 3200  -  total flux cleaned = -0.000733316 Jy
! Component: 3250  -  total flux cleaned = -0.000572631 Jy
! Component: 3300  -  total flux cleaned = -0.000527165 Jy
! Component: 3350  -  total flux cleaned = -0.000481824 Jy
! Component: 3400  -  total flux cleaned = -0.000391679 Jy
! Component: 3450  -  total flux cleaned = -0.000235136 Jy
! Component: 3500  -  total flux cleaned = -0.000190593 Jy
! Component: 3550  -  total flux cleaned = -3.62443e-05 Jy
! Component: 3600  -  total flux cleaned = -3.64083e-05 Jy
! Component: 3650  -  total flux cleaned = 2.92879e-05 Jy
! Component: 3700  -  total flux cleaned = 9.42639e-05 Jy
! Component: 3750  -  total flux cleaned = 0.000137456 Jy
! Component: 3800  -  total flux cleaned = 0.000116191 Jy
! Component: 3850  -  total flux cleaned = 0.000286518 Jy
! Component: 3900  -  total flux cleaned = 0.000180628 Jy
! Component: 3950  -  total flux cleaned = 0.000412166 Jy
! Component: 4000  -  total flux cleaned = 0.000349536 Jy
! Component: 4050  -  total flux cleaned = 0.000495363 Jy
! Total flux subtracted in 4096 components = 0.000599054 Jy
! Clean residual min=-0.001307 max=0.001257 Jy/beam
! Clean residual mean=0.000001 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.0717085 Jy
keep
! Adding 343 model components to the UV plane model.
! The established model now contains 441 components and 0.0717085 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1705+7756_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8562 x 2.64 at 5.138 degrees (North through East)
! Clean map  min=-0.010731  max=0.051111 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1705+7756_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0511108 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000380177 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.23149 2.23149 4.46298 8.92595 17.8519 35.7038 71.4076
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0011 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.051 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1705+7756_X_uvs.log closed on Wed Sep 25 00:06:57 2013