! Started logfile: /g0/scr/pima/npcsb_uvs/J1705+7756_S_uvs.log on Wed Sep 25 00:12:35 2013 obs /g0/scr/pima/npcsb_uvs/J1705+7756_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1705+7756_S_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.884161 visibilities/baseline/integration-bin. ! Found source: J1705+7756 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23693e+09 8e+06 1 8e+06 ! 02 2 2.26693e+09 8e+06 1 8e+06 ! 03 3 2.35693e+09 8e+06 1 8e+06 ! 04 4 2.37693e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7480 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1705+7756_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008650Jy sigma=2.106964 ! Fit after self-cal, rms=0.921081Jy sigma=1.920743 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.863 mas, bmaj=9.596 mas, bpa=5.457 degrees ! Estimated noise=7.51444 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0622361 Jy ! Component: 100 - total flux cleaned = 0.0782197 Jy ! Total flux subtracted in 100 components = 0.0782197 Jy ! Clean residual min=-0.011191 max=0.012482 Jy/beam ! Clean residual mean=-0.000005 rms=0.002721 Jy/beam ! Combined flux in latest and established models = 0.0782197 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0782197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103290Jy sigma=0.198856 ! Fit after self-cal, rms=0.102626Jy sigma=0.197087 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.479 mas, bmaj=10.14 mas, bpa=4.33 degrees ! Estimated noise=4.03213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129927 Jy ! Component: 100 - total flux cleaned = 0.0202445 Jy ! Component: 150 - total flux cleaned = 0.0249384 Jy ! Component: 200 - total flux cleaned = 0.0270512 Jy ! Total flux subtracted in 200 components = 0.0270512 Jy ! Clean residual min=-0.009343 max=0.010455 Jy/beam ! Clean residual mean=-0.000005 rms=0.002530 Jy/beam ! Combined flux in latest and established models = 0.105271 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.105271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100864Jy sigma=0.193152 ! Fit after self-cal, rms=0.100803Jy sigma=0.192847 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.90 HN 0.88 KP 0.92 ! LA 1.00 MK 0.91 NL 1.20 OV 1.04 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 0.97 KP 0.90 ! LA 1.00 MK 1.06 NL 1.19 OV 1.18 ! PT 0.93 SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.93 HN 0.93 KP 0.96 ! LA 0.82 MK 1.14 NL 1.36 OV 1.17 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 0.87 KP 0.90 ! LA 0.69 MK 1.18 NL 1.15 OV 0.98 ! PT 0.91 SC 1.10 ! ! ! Fit before self-cal, rms=0.100803Jy sigma=0.192847 ! Fit after self-cal, rms=0.097062Jy sigma=0.190748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.508 mas, bmaj=9.978 mas, bpa=3.804 degrees ! Estimated noise=3.91944 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0018897 Jy ! Component: 100 - total flux cleaned = -0.00139763 Jy ! Component: 150 - total flux cleaned = -0.00118604 Jy ! Component: 200 - total flux cleaned = -0.00105414 Jy ! Total flux subtracted in 200 components = -0.00105414 Jy ! Clean residual min=-0.009617 max=0.008609 Jy/beam ! Clean residual mean=-0.000007 rms=0.002199 Jy/beam ! Combined flux in latest and established models = 0.104217 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.104217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096903Jy sigma=0.190334 ! Fit after self-cal, rms=0.097018Jy sigma=0.190067 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097018Jy sigma=0.190067 ! Fit after self-cal, rms=0.097110Jy sigma=0.190038 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=9.933 mas, bpa=3.597 degrees ! Estimated noise=3.90242 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000587774 Jy ! Component: 100 - total flux cleaned = -0.000519066 Jy ! Component: 150 - total flux cleaned = -0.000448742 Jy ! Component: 200 - total flux cleaned = -0.000324937 Jy ! Total flux subtracted in 200 components = -0.000324937 Jy ! Clean residual min=-0.010131 max=0.008556 Jy/beam ! Clean residual mean=-0.000007 rms=0.002167 Jy/beam ! Combined flux in latest and established models = 0.103892 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 0.103892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096997Jy sigma=0.189796 ! Fit after self-cal, rms=0.097049Jy sigma=0.189757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.05271e-06 Jy ! Component: 100 - total flux cleaned = 6.79332e-05 Jy ! Component: 150 - total flux cleaned = 7.12244e-05 Jy ! Component: 200 - total flux cleaned = 7.07947e-05 Jy ! Total flux subtracted in 200 components = 7.07947e-05 Jy ! Clean residual min=-0.010343 max=0.008577 Jy/beam ! Clean residual mean=-0.000007 rms=0.002145 Jy/beam ! Combined flux in latest and established models = 0.103963 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 50 components and 0.103963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096961Jy sigma=0.189592 ! Fit after self-cal, rms=0.096994Jy sigma=0.189575 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096994Jy sigma=0.189575 ! Fit after self-cal, rms=0.096107Jy sigma=0.189563 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=9.913 mas, bpa=3.502 degrees ! Estimated noise=3.87222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.33217e-05 Jy ! Component: 100 - total flux cleaned = -2.88057e-05 Jy ! Component: 150 - total flux cleaned = -3.01898e-05 Jy ! Component: 200 - total flux cleaned = -3.03294e-05 Jy ! Total flux subtracted in 200 components = -3.03294e-05 Jy ! Clean residual min=-0.010344 max=0.008622 Jy/beam ! Clean residual mean=-0.000007 rms=0.002106 Jy/beam ! Combined flux in latest and established models = 0.103932 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.103932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096022Jy sigma=0.189434 ! Fit after self-cal, rms=0.096050Jy sigma=0.189423 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.44347e-05 Jy ! Component: 100 - total flux cleaned = 0.000140877 Jy ! Component: 150 - total flux cleaned = 8.52416e-05 Jy ! Component: 200 - total flux cleaned = 0.000136346 Jy ! Total flux subtracted in 200 components = 0.000136346 Jy ! Clean residual min=-0.010455 max=0.008611 Jy/beam ! Clean residual mean=-0.000007 rms=0.002091 Jy/beam ! Combined flux in latest and established models = 0.104069 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 59 components and 0.104069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095982Jy sigma=0.189310 ! Fit after self-cal, rms=0.096004Jy sigma=0.189302 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096004Jy sigma=0.189302 ! Fit after self-cal, rms=0.094613Jy sigma=0.189286 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.34 mas, bmaj=11.35 mas, bpa=3.885 degrees ! Estimated noise=4.66428 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020703 Jy ! Component: 100 - total flux cleaned = -0.00214527 Jy ! Component: 150 - total flux cleaned = -0.00214828 Jy ! Component: 200 - total flux cleaned = -0.00214692 Jy ! Total flux subtracted in 200 components = -0.00214692 Jy ! Clean residual min=-0.010993 max=0.008522 Jy/beam ! Clean residual mean=-0.000009 rms=0.003110 Jy/beam ! Combined flux in latest and established models = 0.101922 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 68 components and 0.101922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094679Jy sigma=0.189394 ! Fit after self-cal, rms=0.094696Jy sigma=0.189305 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000187064 Jy ! Component: 100 - total flux cleaned = -0.000291297 Jy ! Component: 150 - total flux cleaned = -0.000291144 Jy ! Component: 200 - total flux cleaned = -0.000253097 Jy ! Total flux subtracted in 200 components = -0.000253097 Jy ! Clean residual min=-0.011039 max=0.008660 Jy/beam ! Clean residual mean=-0.000008 rms=0.003046 Jy/beam ! Combined flux in latest and established models = 0.101669 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 73 components and 0.101669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094759Jy sigma=0.189449 ! Fit after self-cal, rms=0.094779Jy sigma=0.189412 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.509 mas, bmaj=9.905 mas, bpa=3.456 degrees ! Estimated noise=3.82887 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.509 x 9.905 at 3.456 degrees (North through East) ! Clean map min=-0.012496 max=0.080497 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.877 mas, bmaj=9.267 mas, bpa=4.687 degrees ! Estimated noise=7.17947 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0576174 Jy ! Component: 100 - total flux cleaned = 0.0756628 Jy ! Component: 150 - total flux cleaned = 0.0867106 Jy ! Component: 200 - total flux cleaned = 0.0918894 Jy ! Total flux subtracted in 200 components = 0.0918894 Jy ! Clean residual min=-0.013459 max=0.011545 Jy/beam ! Clean residual mean=-0.000003 rms=0.002620 Jy/beam ! Combined flux in latest and established models = 0.0918893 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0918893 Jy ! Inverting map and beam ! Estimated beam: bmin=3.509 mas, bmaj=9.905 mas, bpa=3.456 degrees ! Estimated noise=3.82887 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321255 Jy ! Component: 100 - total flux cleaned = 0.0053467 Jy ! Component: 150 - total flux cleaned = 0.00631158 Jy ! Component: 200 - total flux cleaned = 0.00681907 Jy ! Total flux subtracted in 200 components = 0.00681907 Jy ! Clean residual min=-0.010519 max=0.008161 Jy/beam ! Clean residual mean=-0.000005 rms=0.002120 Jy/beam ! Combined flux in latest and established models = 0.0987084 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 29 components and 0.0987084 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.34 mas, bmaj=11.35 mas, bpa=3.885 degrees ! Estimated noise=4.66428 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000752445 Jy ! Component: 100 - total flux cleaned = 0.000113434 Jy ! Component: 150 - total flux cleaned = 0.000727448 Jy ! Component: 200 - total flux cleaned = 0.00105752 Jy ! Total flux subtracted in 200 components = 0.00105752 Jy ! Clean residual min=-0.010951 max=0.008264 Jy/beam ! Clean residual mean=-0.000007 rms=0.003065 Jy/beam ! Combined flux in latest and established models = 0.0997659 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000226095 Jy ! Component: 100 - total flux cleaned = 0.000425216 Jy ! Component: 150 - total flux cleaned = 0.000602486 Jy ! Component: 200 - total flux cleaned = 0.000723374 Jy ! Total flux subtracted in 200 components = 0.000723374 Jy ! Clean residual min=-0.010982 max=0.008559 Jy/beam ! Clean residual mean=-0.000008 rms=0.003052 Jy/beam ! Combined flux in latest and established models = 0.100489 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 45 components and 0.100489 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.509 mas, bmaj=9.905 mas, bpa=3.456 degrees ! Estimated noise=3.82887 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108914 Jy ! Component: 100 - total flux cleaned = 0.00121885 Jy ! Component: 150 - total flux cleaned = 0.00104377 Jy ! Component: 200 - total flux cleaned = 0.00116598 Jy ! Total flux subtracted in 200 components = 0.00116598 Jy ! Clean residual min=-0.010809 max=0.008416 Jy/beam ! Clean residual mean=-0.000006 rms=0.002053 Jy/beam ! Combined flux in latest and established models = 0.101655 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.101655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094652Jy sigma=0.189409 ! Fit after self-cal, rms=0.094649Jy sigma=0.189316 wmodel /g0/scr/pima/npcsb_uvs/J1705+7756_S_map.mod ! Writing 63 model components to file: /g0/scr/pima/npcsb_uvs/J1705+7756_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J1705+7756_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1705+7756_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1705+7756_S_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1705+7756_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00313265 Jy ! Component: 100 - total flux cleaned = -0.00438746 Jy ! Component: 150 - total flux cleaned = -0.00566402 Jy ! Component: 200 - total flux cleaned = -0.00673233 Jy ! Component: 250 - total flux cleaned = -0.00717727 Jy ! Component: 300 - total flux cleaned = -0.00748698 Jy ! Component: 350 - total flux cleaned = -0.00758641 Jy ! Component: 400 - total flux cleaned = -0.00758886 Jy ! Component: 450 - total flux cleaned = -0.00740824 Jy ! Component: 500 - total flux cleaned = -0.00740875 Jy ! Component: 550 - total flux cleaned = -0.00740912 Jy ! Component: 600 - total flux cleaned = -0.00741008 Jy ! Component: 650 - total flux cleaned = -0.00733143 Jy ! Component: 700 - total flux cleaned = -0.00740637 Jy ! Component: 750 - total flux cleaned = -0.00733106 Jy ! Component: 800 - total flux cleaned = -0.00732992 Jy ! Component: 850 - total flux cleaned = -0.00711791 Jy ! Component: 900 - total flux cleaned = -0.00711719 Jy ! Component: 950 - total flux cleaned = -0.00705137 Jy ! Component: 1000 - total flux cleaned = -0.00698735 Jy ! Component: 1050 - total flux cleaned = -0.0069254 Jy ! Component: 1100 - total flux cleaned = -0.00686407 Jy ! Component: 1150 - total flux cleaned = -0.00674484 Jy ! Component: 1200 - total flux cleaned = -0.00668649 Jy ! Component: 1250 - total flux cleaned = -0.00657345 Jy ! Component: 1300 - total flux cleaned = -0.00657422 Jy ! Component: 1350 - total flux cleaned = -0.00651946 Jy ! Component: 1400 - total flux cleaned = -0.00641345 Jy ! Component: 1450 - total flux cleaned = -0.00636245 Jy ! Component: 1500 - total flux cleaned = -0.00636199 Jy ! Component: 1550 - total flux cleaned = -0.00636141 Jy ! Component: 1600 - total flux cleaned = -0.00631433 Jy ! Component: 1650 - total flux cleaned = -0.00640959 Jy ! Component: 1700 - total flux cleaned = -0.00645555 Jy ! Component: 1750 - total flux cleaned = -0.00650019 Jy ! Component: 1800 - total flux cleaned = -0.00645531 Jy ! Component: 1850 - total flux cleaned = -0.006413 Jy ! Component: 1900 - total flux cleaned = -0.00662672 Jy ! Component: 1950 - total flux cleaned = -0.00671187 Jy ! Component: 2000 - total flux cleaned = -0.00687668 Jy ! Component: 2050 - total flux cleaned = -0.00691714 Jy ! Component: 2100 - total flux cleaned = -0.0069558 Jy ! Component: 2150 - total flux cleaned = -0.00691613 Jy ! Component: 2200 - total flux cleaned = -0.00695476 Jy ! Component: 2250 - total flux cleaned = -0.00699269 Jy ! Component: 2300 - total flux cleaned = -0.0071043 Jy ! Component: 2350 - total flux cleaned = -0.00724967 Jy ! Component: 2400 - total flux cleaned = -0.00717746 Jy ! Component: 2450 - total flux cleaned = -0.00714291 Jy ! Component: 2500 - total flux cleaned = -0.00724843 Jy ! Component: 2550 - total flux cleaned = -0.00724951 Jy ! Component: 2600 - total flux cleaned = -0.00735097 Jy ! Component: 2650 - total flux cleaned = -0.00741746 Jy ! Component: 2700 - total flux cleaned = -0.00748325 Jy ! Component: 2750 - total flux cleaned = -0.00758133 Jy ! Component: 2800 - total flux cleaned = -0.0076768 Jy ! Component: 2850 - total flux cleaned = -0.00767741 Jy ! Component: 2900 - total flux cleaned = -0.00786405 Jy ! Component: 2950 - total flux cleaned = -0.00783316 Jy ! Component: 3000 - total flux cleaned = -0.0079846 Jy ! Component: 3050 - total flux cleaned = -0.00801487 Jy ! Component: 3100 - total flux cleaned = -0.00813313 Jy ! Component: 3150 - total flux cleaned = -0.00827888 Jy ! Component: 3200 - total flux cleaned = -0.00839464 Jy ! Component: 3250 - total flux cleaned = -0.00845184 Jy ! Component: 3300 - total flux cleaned = -0.00862118 Jy ! Component: 3350 - total flux cleaned = -0.00873271 Jy ! Component: 3400 - total flux cleaned = -0.00889863 Jy ! Component: 3450 - total flux cleaned = -0.00895281 Jy ! Component: 3500 - total flux cleaned = -0.00906105 Jy ! Component: 3550 - total flux cleaned = -0.00911429 Jy ! Component: 3600 - total flux cleaned = -0.00922019 Jy ! Component: 3650 - total flux cleaned = -0.00929835 Jy ! Component: 3700 - total flux cleaned = -0.00934958 Jy ! Component: 3750 - total flux cleaned = -0.00937469 Jy ! Component: 3800 - total flux cleaned = -0.00932396 Jy ! Component: 3850 - total flux cleaned = -0.00934919 Jy ! Component: 3900 - total flux cleaned = -0.00939894 Jy ! Component: 3950 - total flux cleaned = -0.00939935 Jy ! Component: 4000 - total flux cleaned = -0.0095451 Jy ! Component: 4050 - total flux cleaned = -0.00954459 Jy ! Total flux subtracted in 4096 components = -0.0095204 Jy ! Clean residual min=-0.001186 max=0.001336 Jy/beam ! Clean residual mean=-0.000003 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0921348 Jy keep ! Adding 341 model components to the UV plane model. ! The established model now contains 404 components and 0.0921348 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1705+7756_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.509 x 9.905 at 3.456 degrees (North through East) ! Clean map min=-0.010584 max=0.078643 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1705+7756_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.078643 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000456543 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.74158 1.74158 3.48316 6.96631 13.9326 27.8652 55.7305 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.078 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1705+7756_S_uvs.log closed on Wed Sep 25 00:12:39 2013