! Started logfile: /g0/scr/pima/npcsb_uvs/J1658+4737_S_uvs.log on Wed Sep 25 00:12:29 2013
obs /g0/scr/pima/npcsb_uvs/J1658+4737_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1658+4737_S_uva.fits
! AN table 1: 12 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.751852 visibilities/baseline/integration-bin.
! Found source: J1658+4737
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1624 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1658+4737_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.462438Jy  sigma=3.208714
! Fit after  self-cal, rms=0.259301Jy  sigma=0.515422
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.614 mas, bmaj=9.587 mas, bpa=-38.63 degrees
! Estimated noise=11.8552 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.773452 Jy
! Component: 100  -  total flux cleaned = 0.957705 Jy
! Total flux subtracted in 100 components = 0.957705 Jy
! Clean residual min=-0.058278 max=0.085590 Jy/beam
! Clean residual mean=0.000126 rms=0.016088 Jy/beam
! Combined flux in latest and established models = 0.957705 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.957705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.268123Jy  sigma=0.536140
! Fit after  self-cal, rms=0.268092Jy  sigma=0.536048
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.14 mas, bmaj=9.708 mas, bpa=-39.15 degrees
! Estimated noise=8.3351 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.120425 Jy
! Component: 100  -  total flux cleaned = 0.193824 Jy
! Component: 150  -  total flux cleaned = 0.242567 Jy
! Component: 200  -  total flux cleaned = 0.275244 Jy
! Total flux subtracted in 200 components = 0.275244 Jy
! Clean residual min=-0.037331 max=0.038590 Jy/beam
! Clean residual mean=0.000014 rms=0.009427 Jy/beam
! Combined flux in latest and established models = 1.23295 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 33 components and 1.23295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.196399Jy  sigma=0.367147
! Fit after  self-cal, rms=0.195920Jy  sigma=0.365901
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        0.98     KP        0.99     
!   LA        1.16     MK        0.90     NL        1.14     OV        0.97     
!   PT        1.07     SC        0.93     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.01     HN        1.01     KP        0.99     
!   LA        1.03     MK        0.98     NL        1.18     OV        0.97     
!   PT        0.99     SC        0.94     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        1.01     HN        1.06     KP        0.99     
!   LA        0.84     MK        1.07     NL        1.30     OV        1.00     
!   PT        1.08     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        1.03     HN        1.01     KP        0.93     
!   LA        0.72     MK        1.09     NL        1.24     OV        0.86     
!   PT        0.94     SC        1.10     
! 
! 
! Fit before self-cal, rms=0.195920Jy  sigma=0.365901
! Fit after  self-cal, rms=0.109745Jy  sigma=0.214880
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.193 mas, bmaj=9.677 mas, bpa=-38.78 degrees
! Estimated noise=8.31854 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0150908 Jy
! Component: 100  -  total flux cleaned = -0.0200393 Jy
! Component: 150  -  total flux cleaned = -0.0204618 Jy
! Component: 200  -  total flux cleaned = -0.020812 Jy
! Total flux subtracted in 200 components = -0.020812 Jy
! Clean residual min=-0.019931 max=0.013291 Jy/beam
! Clean residual mean=-0.000049 rms=0.004021 Jy/beam
! Combined flux in latest and established models = 1.21214 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 45 components and 1.21214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103960Jy  sigma=0.203547
! Fit after  self-cal, rms=0.103847Jy  sigma=0.203311
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103847Jy  sigma=0.203311
! Fit after  self-cal, rms=0.102196Jy  sigma=0.200595
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.2 mas, bmaj=9.647 mas, bpa=-38.77 degrees
! Estimated noise=8.28293 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0119527 Jy
! Component: 100  -  total flux cleaned = -0.0137708 Jy
! Component: 150  -  total flux cleaned = -0.0137601 Jy
! Component: 200  -  total flux cleaned = -0.0137471 Jy
! Total flux subtracted in 200 components = -0.0137471 Jy
! Clean residual min=-0.016623 max=0.011628 Jy/beam
! Clean residual mean=-0.000039 rms=0.003381 Jy/beam
! Combined flux in latest and established models = 1.19839 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 58 components and 1.19839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099540Jy  sigma=0.195160
! Fit after  self-cal, rms=0.099489Jy  sigma=0.195086
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000108403 Jy
! Component: 100  -  total flux cleaned = -0.000281904 Jy
! Component: 150  -  total flux cleaned = -0.000811101 Jy
! Component: 200  -  total flux cleaned = -0.00113297 Jy
! Total flux subtracted in 200 components = -0.00113297 Jy
! Clean residual min=-0.016201 max=0.011829 Jy/beam
! Clean residual mean=-0.000038 rms=0.003247 Jy/beam
! Combined flux in latest and established models = 1.19726 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 64 components and 1.19726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098890Jy  sigma=0.193539
! Fit after  self-cal, rms=0.098856Jy  sigma=0.193501
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098856Jy  sigma=0.193501
! Fit after  self-cal, rms=0.097889Jy  sigma=0.191534
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.202 mas, bmaj=9.625 mas, bpa=-38.76 degrees
! Estimated noise=8.25767 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00952519 Jy
! Component: 100  -  total flux cleaned = -0.0104823 Jy
! Component: 150  -  total flux cleaned = -0.0103068 Jy
! Component: 200  -  total flux cleaned = -0.0103193 Jy
! Total flux subtracted in 200 components = -0.0103193 Jy
! Clean residual min=-0.014210 max=0.010433 Jy/beam
! Clean residual mean=-0.000028 rms=0.002854 Jy/beam
! Combined flux in latest and established models = 1.18694 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 71 components and 1.18694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096691Jy  sigma=0.189097
! Fit after  self-cal, rms=0.096694Jy  sigma=0.189074
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.72887e-05 Jy
! Component: 100  -  total flux cleaned = -0.000234683 Jy
! Component: 150  -  total flux cleaned = -0.000574302 Jy
! Component: 200  -  total flux cleaned = -0.000778963 Jy
! Total flux subtracted in 200 components = -0.000778963 Jy
! Clean residual min=-0.013958 max=0.010384 Jy/beam
! Clean residual mean=-0.000028 rms=0.002780 Jy/beam
! Combined flux in latest and established models = 1.18616 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 1.18616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096470Jy  sigma=0.188375
! Fit after  self-cal, rms=0.096460Jy  sigma=0.188365
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096460Jy  sigma=0.188365
! Fit after  self-cal, rms=0.095994Jy  sigma=0.187249
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.904 mas, bmaj=10.63 mas, bpa=-40.05 degrees
! Estimated noise=9.97007 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00585635 Jy
! Component: 100  -  total flux cleaned = -0.00723679 Jy
! Component: 150  -  total flux cleaned = -0.00780788 Jy
! Component: 200  -  total flux cleaned = -0.00792133 Jy
! Total flux subtracted in 200 components = -0.00792133 Jy
! Clean residual min=-0.014451 max=0.012954 Jy/beam
! Clean residual mean=-0.000044 rms=0.003633 Jy/beam
! Combined flux in latest and established models = 1.17824 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 82 components and 1.17824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095571Jy  sigma=0.185951
! Fit after  self-cal, rms=0.095554Jy  sigma=0.185882
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.28478e-05 Jy
! Component: 100  -  total flux cleaned = -0.000259711 Jy
! Component: 150  -  total flux cleaned = -0.000473933 Jy
! Component: 200  -  total flux cleaned = -0.000660941 Jy
! Total flux subtracted in 200 components = -0.000660941 Jy
! Clean residual min=-0.013893 max=0.013117 Jy/beam
! Clean residual mean=-0.000042 rms=0.003555 Jy/beam
! Combined flux in latest and established models = 1.17758 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 87 components and 1.17758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095568Jy  sigma=0.185766
! Fit after  self-cal, rms=0.095552Jy  sigma=0.185729
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.203 mas, bmaj=9.611 mas, bpa=-38.75 degrees
! Estimated noise=8.23778 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.203 x 9.611 at -38.75 degrees (North through East)
! Clean map  min=-0.011551  max=1.0008 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095552Jy  sigma=0.185729
! Fit after  self-cal, rms=0.090074Jy  sigma=0.169173
! Inverting map and beam 
! Estimated beam: bmin=3.208 mas, bmaj=9.587 mas, bpa=-38.74 degrees
! Estimated noise=8.24055 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00245851 Jy
! Component: 100  -  total flux cleaned = -0.00285749 Jy
! Component: 150  -  total flux cleaned = -0.00307292 Jy
! Component: 200  -  total flux cleaned = -0.00307597 Jy
! Total flux subtracted in 200 components = -0.00307597 Jy
! Clean residual min=-0.010241 max=0.009172 Jy/beam
! Clean residual mean=0.000001 rms=0.002233 Jy/beam
! Combined flux in latest and established models = 1.1745 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 95 components and 1.1745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089711Jy  sigma=0.168483
! Fit after  self-cal, rms=0.089707Jy  sigma=0.168477
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000104667 Jy
! Component: 100  -  total flux cleaned = -0.000174661 Jy
! Component: 150  -  total flux cleaned = -0.000237192 Jy
! Component: 200  -  total flux cleaned = -0.000354076 Jy
! Total flux subtracted in 200 components = -0.000354076 Jy
! Clean residual min=-0.010090 max=0.009065 Jy/beam
! Clean residual mean=0.000001 rms=0.002208 Jy/beam
! Combined flux in latest and established models = 1.17415 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 96 components and 1.17415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089610Jy  sigma=0.168262
! Fit after  self-cal, rms=0.089606Jy  sigma=0.168259
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089606Jy  sigma=0.168259
! Fit after  self-cal, rms=0.089613Jy  sigma=0.168014
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.644 mas, bmaj=9.414 mas, bpa=-38.42 degrees
! Estimated noise=11.9662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.775605 Jy
! Component: 100  -  total flux cleaned = 0.956496 Jy
! Component: 150  -  total flux cleaned = 1.03419 Jy
! Component: 200  -  total flux cleaned = 1.0773 Jy
! Total flux subtracted in 200 components = 1.0773 Jy
! Clean residual min=-0.019033 max=0.026919 Jy/beam
! Clean residual mean=0.000076 rms=0.005025 Jy/beam
! Combined flux in latest and established models = 1.0773 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 1.0773 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.208 mas, bmaj=9.582 mas, bpa=-38.73 degrees
! Estimated noise=8.23592 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5, 8.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0355281 Jy
! Component: 100  -  total flux cleaned = 0.0570687 Jy
! Component: 150  -  total flux cleaned = 0.0710036 Jy
! Component: 200  -  total flux cleaned = 0.0802472 Jy
! Total flux subtracted in 200 components = 0.0802472 Jy
! Clean residual min=-0.009548 max=0.008720 Jy/beam
! Clean residual mean=0.000030 rms=0.002305 Jy/beam
! Combined flux in latest and established models = 1.15755 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 49 components and 1.15755 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.916 mas, bmaj=10.59 mas, bpa=-39.73 degrees
! Estimated noise=9.96308 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00737719 Jy
! Component: 100  -  total flux cleaned = 0.00907166 Jy
! Component: 150  -  total flux cleaned = 0.0106541 Jy
! Component: 200  -  total flux cleaned = 0.0119321 Jy
! Total flux subtracted in 200 components = 0.0119321 Jy
! Clean residual min=-0.009939 max=0.011034 Jy/beam
! Clean residual mean=0.000023 rms=0.002966 Jy/beam
! Combined flux in latest and established models = 1.16948 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00088979 Jy
! Component: 100  -  total flux cleaned = 0.00127965 Jy
! Component: 150  -  total flux cleaned = 0.00163717 Jy
! Component: 200  -  total flux cleaned = 0.00203042 Jy
! Total flux subtracted in 200 components = 0.00203042 Jy
! Clean residual min=-0.009662 max=0.010772 Jy/beam
! Clean residual mean=0.000018 rms=0.002917 Jy/beam
! Combined flux in latest and established models = 1.17151 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 102 components and 1.17151 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.208 mas, bmaj=9.582 mas, bpa=-38.73 degrees
! Estimated noise=8.23592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00153726 Jy
! Component: 100  -  total flux cleaned = -0.00137336 Jy
! Component: 150  -  total flux cleaned = -0.00123609 Jy
! Component: 200  -  total flux cleaned = -0.00098653 Jy
! Total flux subtracted in 200 components = -0.00098653 Jy
! Clean residual min=-0.008468 max=0.007511 Jy/beam
! Clean residual mean=0.000011 rms=0.002000 Jy/beam
! Combined flux in latest and established models = 1.17053 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 129 components and 1.17053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088717Jy  sigma=0.166281
! Fit after  self-cal, rms=0.088647Jy  sigma=0.166098
wmodel /g0/scr/pima/npcsb_uvs/J1658+4737_S_map.mod
! Writing 129 model components to file: /g0/scr/pima/npcsb_uvs/J1658+4737_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1658+4737_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1658+4737_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1658+4737_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J1658+4737_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000863547 Jy
! Component: 100  -  total flux cleaned = -0.000985716 Jy
! Component: 150  -  total flux cleaned = -0.00144956 Jy
! Component: 200  -  total flux cleaned = -0.0021037 Jy
! Component: 250  -  total flux cleaned = -0.00282338 Jy
! Component: 300  -  total flux cleaned = -0.0034111 Jy
! Component: 350  -  total flux cleaned = -0.00378519 Jy
! Component: 400  -  total flux cleaned = -0.00440863 Jy
! Component: 450  -  total flux cleaned = -0.00474913 Jy
! Component: 500  -  total flux cleaned = -0.00508192 Jy
! Component: 550  -  total flux cleaned = -0.00572396 Jy
! Component: 600  -  total flux cleaned = -0.00626707 Jy
! Component: 650  -  total flux cleaned = -0.0066438 Jy
! Component: 700  -  total flux cleaned = -0.0070845 Jy
! Component: 750  -  total flux cleaned = -0.00758068 Jy
! Component: 800  -  total flux cleaned = -0.00771905 Jy
! Component: 850  -  total flux cleaned = -0.00785153 Jy
! Component: 900  -  total flux cleaned = -0.00778543 Jy
! Component: 950  -  total flux cleaned = -0.00791435 Jy
! Component: 1000  -  total flux cleaned = -0.00803808 Jy
! Component: 1050  -  total flux cleaned = -0.00809938 Jy
! Component: 1100  -  total flux cleaned = -0.00833954 Jy
! Component: 1150  -  total flux cleaned = -0.0083379 Jy
! Component: 1200  -  total flux cleaned = -0.00845437 Jy
! Component: 1250  -  total flux cleaned = -0.00845474 Jy
! Component: 1300  -  total flux cleaned = -0.00867927 Jy
! Component: 1350  -  total flux cleaned = -0.00868038 Jy
! Component: 1400  -  total flux cleaned = -0.00889782 Jy
! Component: 1450  -  total flux cleaned = -0.00911011 Jy
! Component: 1500  -  total flux cleaned = -0.0091109 Jy
! Component: 1550  -  total flux cleaned = -0.00931794 Jy
! Component: 1600  -  total flux cleaned = -0.00967088 Jy
! Component: 1650  -  total flux cleaned = -0.00982085 Jy
! Component: 1700  -  total flux cleaned = -0.0101148 Jy
! Component: 1750  -  total flux cleaned = -0.010211 Jy
! Component: 1800  -  total flux cleaned = -0.0102577 Jy
! Component: 1850  -  total flux cleaned = -0.0105867 Jy
! Component: 1900  -  total flux cleaned = -0.0107722 Jy
! Component: 1950  -  total flux cleaned = -0.0111856 Jy
! Component: 2000  -  total flux cleaned = -0.0114127 Jy
! Component: 2050  -  total flux cleaned = -0.0118621 Jy
! Component: 2100  -  total flux cleaned = -0.012039 Jy
! Component: 2150  -  total flux cleaned = -0.0124337 Jy
! Component: 2200  -  total flux cleaned = -0.0125206 Jy
! Component: 2250  -  total flux cleaned = -0.012692 Jy
! Component: 2300  -  total flux cleaned = -0.0129895 Jy
! Component: 2350  -  total flux cleaned = -0.0131998 Jy
! Component: 2400  -  total flux cleaned = -0.0133664 Jy
! Component: 2450  -  total flux cleaned = -0.0134901 Jy
! Component: 2500  -  total flux cleaned = -0.0136951 Jy
! Component: 2550  -  total flux cleaned = -0.0137765 Jy
! Component: 2600  -  total flux cleaned = -0.0139767 Jy
! Component: 2650  -  total flux cleaned = -0.014175 Jy
! Component: 2700  -  total flux cleaned = -0.0142928 Jy
! Component: 2750  -  total flux cleaned = -0.0144879 Jy
! Component: 2800  -  total flux cleaned = -0.0146039 Jy
! Component: 2850  -  total flux cleaned = -0.0147572 Jy
! Component: 2900  -  total flux cleaned = -0.0148336 Jy
! Component: 2950  -  total flux cleaned = -0.0150979 Jy
! Component: 3000  -  total flux cleaned = -0.01521 Jy
! Component: 3050  -  total flux cleaned = -0.0153957 Jy
! Component: 3100  -  total flux cleaned = -0.0154694 Jy
! Component: 3150  -  total flux cleaned = -0.0156158 Jy
! Component: 3200  -  total flux cleaned = -0.0157973 Jy
! Component: 3250  -  total flux cleaned = -0.0159414 Jy
! Component: 3300  -  total flux cleaned = -0.0161919 Jy
! Component: 3350  -  total flux cleaned = -0.0161561 Jy
! Component: 3400  -  total flux cleaned = -0.016227 Jy
! Component: 3450  -  total flux cleaned = -0.0164723 Jy
! Component: 3500  -  total flux cleaned = -0.0165073 Jy
! Component: 3550  -  total flux cleaned = -0.0166114 Jy
! Component: 3600  -  total flux cleaned = -0.0166801 Jy
! Component: 3650  -  total flux cleaned = -0.0167142 Jy
! Component: 3700  -  total flux cleaned = -0.0167822 Jy
! Component: 3750  -  total flux cleaned = -0.0169511 Jy
! Component: 3800  -  total flux cleaned = -0.0169177 Jy
! Component: 3850  -  total flux cleaned = -0.0170845 Jy
! Component: 3900  -  total flux cleaned = -0.0172173 Jy
! Component: 3950  -  total flux cleaned = -0.0173164 Jy
! Component: 4000  -  total flux cleaned = -0.0174474 Jy
! Component: 4050  -  total flux cleaned = -0.0176432 Jy
! Total flux subtracted in 4096 components = -0.0177083 Jy
! Clean residual min=-0.002297 max=0.001837 Jy/beam
! Clean residual mean=0.000000 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 1.15282 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 411 components and 1.15282 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1658+4737_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.208 x 9.582 at -38.73 degrees (North through East)
! Clean map  min=-0.0041033  max=1.0061 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1658+4737_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.00615 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000563351 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.167973 0.167973 0.335945 0.67189 1.34378 2.68756 5.37512 10.7502 21.5005 43.001 86.0019
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0016 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.006 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1658+4737_S_uvs.log closed on Wed Sep 25 00:12:34 2013