! Started logfile: /g0/scr/pima/npcsb_uvs/J1537+8154_S_uvs.log on Wed Sep 25 00:12:04 2013
obs /g0/scr/pima/npcsb_uvs/J1537+8154_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1537+8154_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.977778 visibilities/baseline/integration-bin.
! Found source: J1537+8154
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8096 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1537+8154_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.995647Jy  sigma=2.025305
! Fit after  self-cal, rms=0.822709Jy  sigma=1.677775
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.446 mas, bmaj=9.83 mas, bpa=-1.401 degrees
! Estimated noise=8.72624 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.127683 Jy
! Component: 100  -  total flux cleaned = 0.167636 Jy
! Total flux subtracted in 100 components = 0.167636 Jy
! Clean residual min=-0.023236 max=0.062932 Jy/beam
! Clean residual mean=-0.000001 rms=0.006208 Jy/beam
! Combined flux in latest and established models = 0.167636 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.167636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151653Jy  sigma=0.294392
! Fit after  self-cal, rms=0.150973Jy  sigma=0.293247
! Inverting map 
! Added new window around map position (-7.5, -2.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0546672 Jy
! Component: 100  -  total flux cleaned = 0.0781802 Jy
! Total flux subtracted in 100 components = 0.0781802 Jy
! Clean residual min=-0.015465 max=0.027804 Jy/beam
! Clean residual mean=-0.000003 rms=0.003820 Jy/beam
! Combined flux in latest and established models = 0.245816 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 27 components and 0.245816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123777Jy  sigma=0.232293
! Fit after  self-cal, rms=0.118874Jy  sigma=0.221815
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0260309 Jy
! Component: 100  -  total flux cleaned = 0.0389177 Jy
! Total flux subtracted in 100 components = 0.0389177 Jy
! Clean residual min=-0.011289 max=0.011931 Jy/beam
! Clean residual mean=-0.000003 rms=0.002751 Jy/beam
! Combined flux in latest and established models = 0.284734 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 43 components and 0.284734 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109569Jy  sigma=0.200888
! Fit after  self-cal, rms=0.108763Jy  sigma=0.199113
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.194 mas, bmaj=10.63 mas, bpa=-2.377 degrees
! Estimated noise=3.95327 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0232517 Jy
! Component: 100  -  total flux cleaned = 0.037283 Jy
! Component: 150  -  total flux cleaned = 0.0473355 Jy
! Component: 200  -  total flux cleaned = 0.0520026 Jy
! Total flux subtracted in 200 components = 0.0520026 Jy
! Clean residual min=-0.007944 max=0.013385 Jy/beam
! Clean residual mean=0.000003 rms=0.002199 Jy/beam
! Combined flux in latest and established models = 0.336736 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 77 components and 0.336736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102517Jy  sigma=0.186889
! Fit after  self-cal, rms=0.102206Jy  sigma=0.186192
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        1.05     KP        0.90     
!   LA        1.10     MK        0.95     NL        1.11     OV        0.95     
!   PT        1.03     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.13     KP        0.95     
!   LA        1.03     MK        0.97     NL        1.10     OV        0.99     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.04     HN        1.10     KP        0.96     
!   LA        0.85     MK        1.15     NL        1.22     OV        1.03     
!   PT        1.09     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.04     HN        1.08     KP        0.89     
!   LA        0.71     MK        1.18     NL        1.16     OV        0.89     
!   PT        0.95     SC        1.14     
! 
! 
! Fit before self-cal, rms=0.102206Jy  sigma=0.186192
! Fit after  self-cal, rms=0.099299Jy  sigma=0.177463
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.254 mas, bmaj=10.67 mas, bpa=-2.235 degrees
! Estimated noise=4.05314 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00222604 Jy
! Component: 100  -  total flux cleaned = 0.00252222 Jy
! Component: 150  -  total flux cleaned = 0.0027457 Jy
! Component: 200  -  total flux cleaned = 0.00308356 Jy
! Total flux subtracted in 200 components = 0.00308356 Jy
! Clean residual min=-0.003969 max=0.007187 Jy/beam
! Clean residual mean=-0.000006 rms=0.001132 Jy/beam
! Combined flux in latest and established models = 0.33982 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 105 components and 0.33982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098752Jy  sigma=0.176339
! Fit after  self-cal, rms=0.098739Jy  sigma=0.176174
! Inverting map 
! Added new window around map position (5, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00533335 Jy
! Component: 100  -  total flux cleaned = 0.00618623 Jy
! Component: 150  -  total flux cleaned = 0.00618596 Jy
! Component: 200  -  total flux cleaned = 0.00609391 Jy
! Total flux subtracted in 200 components = 0.00609391 Jy
! Clean residual min=-0.003206 max=0.003553 Jy/beam
! Clean residual mean=-0.000009 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 0.345914 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 130 components and 0.345914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098345Jy  sigma=0.175450
! Fit after  self-cal, rms=0.098303Jy  sigma=0.175369
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098303Jy  sigma=0.175369
! Fit after  self-cal, rms=0.097908Jy  sigma=0.175305
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.253 mas, bmaj=10.67 mas, bpa=-2.257 degrees
! Estimated noise=4.04386 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.002673 Jy
! Component: 100  -  total flux cleaned = 0.00298356 Jy
! Component: 150  -  total flux cleaned = 0.00319478 Jy
! Component: 200  -  total flux cleaned = 0.00338698 Jy
! Total flux subtracted in 200 components = 0.00338698 Jy
! Clean residual min=-0.002930 max=0.002761 Jy/beam
! Clean residual mean=-0.000007 rms=0.000770 Jy/beam
! Combined flux in latest and established models = 0.349301 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 145 components and 0.349301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097768Jy  sigma=0.175041
! Fit after  self-cal, rms=0.097759Jy  sigma=0.175019
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000705364 Jy
! Component: 100  -  total flux cleaned = 0.000763153 Jy
! Component: 150  -  total flux cleaned = 0.000817892 Jy
! Component: 200  -  total flux cleaned = 0.000912952 Jy
! Total flux subtracted in 200 components = 0.000912952 Jy
! Clean residual min=-0.002897 max=0.002579 Jy/beam
! Clean residual mean=-0.000007 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.350214 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 161 components and 0.350214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097699Jy  sigma=0.174906
! Fit after  self-cal, rms=0.097698Jy  sigma=0.174901
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097698Jy  sigma=0.174901
! Fit after  self-cal, rms=0.097254Jy  sigma=0.174882
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.251 mas, bmaj=10.66 mas, bpa=-2.288 degrees
! Estimated noise=4.03336 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110019 Jy
! Component: 100  -  total flux cleaned = 0.00142233 Jy
! Component: 150  -  total flux cleaned = 0.0015028 Jy
! Component: 200  -  total flux cleaned = 0.00150198 Jy
! Total flux subtracted in 200 components = 0.00150198 Jy
! Clean residual min=-0.002872 max=0.002434 Jy/beam
! Clean residual mean=-0.000006 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.351716 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 185 components and 0.351716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097208Jy  sigma=0.174810
! Fit after  self-cal, rms=0.097207Jy  sigma=0.174807
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000169111 Jy
! Component: 100  -  total flux cleaned = 0.000204133 Jy
! Component: 150  -  total flux cleaned = 0.0002031 Jy
! Component: 200  -  total flux cleaned = 0.0001398 Jy
! Total flux subtracted in 200 components = 0.0001398 Jy
! Clean residual min=-0.002840 max=0.002429 Jy/beam
! Clean residual mean=-0.000006 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.351856 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 195 components and 0.351856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097182Jy  sigma=0.174764
! Fit after  self-cal, rms=0.097184Jy  sigma=0.174762
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097184Jy  sigma=0.174762
! Fit after  self-cal, rms=0.096836Jy  sigma=0.174757
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.324 mas, bmaj=12.13 mas, bpa=-1.851 degrees
! Estimated noise=4.90102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0002561 Jy
! Component: 100  -  total flux cleaned = 0.000256385 Jy
! Component: 150  -  total flux cleaned = 0.000231036 Jy
! Component: 200  -  total flux cleaned = 0.000154671 Jy
! Total flux subtracted in 200 components = 0.000154671 Jy
! Clean residual min=-0.002770 max=0.002504 Jy/beam
! Clean residual mean=-0.000012 rms=0.000767 Jy/beam
! Combined flux in latest and established models = 0.35201 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 208 components and 0.35201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096827Jy  sigma=0.174754
! Fit after  self-cal, rms=0.096825Jy  sigma=0.174749
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.59948e-05 Jy
! Component: 100  -  total flux cleaned = -0.00020449 Jy
! Component: 150  -  total flux cleaned = -0.000267061 Jy
! Component: 200  -  total flux cleaned = -0.000340604 Jy
! Total flux subtracted in 200 components = -0.000340604 Jy
! Clean residual min=-0.002815 max=0.002463 Jy/beam
! Clean residual mean=-0.000011 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.35167 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 211 components and 0.35167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096826Jy  sigma=0.174758
! Fit after  self-cal, rms=0.096827Jy  sigma=0.174756
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.248 mas, bmaj=10.66 mas, bpa=-2.306 degrees
! Estimated noise=4.02467 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.248 x 10.66 at -2.306 degrees (North through East)
! Clean map  min=-0.0025735  max=0.16067 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.486 mas, bmaj=9.833 mas, bpa=-1.425 degrees
! Estimated noise=9.03737 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.143561 Jy
! Component: 100  -  total flux cleaned = 0.200991 Jy
! Component: 150  -  total flux cleaned = 0.232914 Jy
! Component: 200  -  total flux cleaned = 0.254491 Jy
! Total flux subtracted in 200 components = 0.254491 Jy
! Clean residual min=-0.012644 max=0.012529 Jy/beam
! Clean residual mean=0.000002 rms=0.002586 Jy/beam
! Combined flux in latest and established models = 0.254491 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.254491 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.248 mas, bmaj=10.66 mas, bpa=-2.306 degrees
! Estimated noise=4.02467 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0299409 Jy
! Component: 100  -  total flux cleaned = 0.048764 Jy
! Component: 150  -  total flux cleaned = 0.0621484 Jy
! Component: 200  -  total flux cleaned = 0.0719166 Jy
! Total flux subtracted in 200 components = 0.0719166 Jy
! Clean residual min=-0.004614 max=0.005818 Jy/beam
! Clean residual mean=0.000004 rms=0.001440 Jy/beam
! Combined flux in latest and established models = 0.326407 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 60 components and 0.326408 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.324 mas, bmaj=12.13 mas, bpa=-1.851 degrees
! Estimated noise=4.90102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112076 Jy
! Component: 100  -  total flux cleaned = 0.0173967 Jy
! Component: 150  -  total flux cleaned = 0.0210823 Jy
! Component: 200  -  total flux cleaned = 0.0220019 Jy
! Total flux subtracted in 200 components = 0.0220019 Jy
! Clean residual min=-0.003256 max=0.003001 Jy/beam
! Clean residual mean=-0.000011 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.348409 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000728748 Jy
! Component: 100  -  total flux cleaned = 0.00131501 Jy
! Component: 150  -  total flux cleaned = 0.0016904 Jy
! Component: 200  -  total flux cleaned = 0.00187282 Jy
! Total flux subtracted in 200 components = 0.00187282 Jy
! Clean residual min=-0.002782 max=0.002775 Jy/beam
! Clean residual mean=-0.000012 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.350282 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 129 components and 0.350282 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.248 mas, bmaj=10.66 mas, bpa=-2.306 degrees
! Estimated noise=4.02467 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000124186 Jy
! Component: 100  -  total flux cleaned = 1.70472e-06 Jy
! Component: 150  -  total flux cleaned = 0.000192522 Jy
! Component: 200  -  total flux cleaned = 0.000514663 Jy
! Total flux subtracted in 200 components = 0.000514663 Jy
! Clean residual min=-0.002860 max=0.002792 Jy/beam
! Clean residual mean=-0.000005 rms=0.000719 Jy/beam
! Combined flux in latest and established models = 0.350797 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 165 components and 0.350797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096968Jy  sigma=0.174974
! Fit after  self-cal, rms=0.096952Jy  sigma=0.174959
wmodel /g0/scr/pima/npcsb_uvs/J1537+8154_S_map.mod
! Writing 165 model components to file: /g0/scr/pima/npcsb_uvs/J1537+8154_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1537+8154_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1537+8154_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1537+8154_S_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J1537+8154_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000533102 Jy
! Component: 100  -  total flux cleaned = -0.00105469 Jy
! Component: 150  -  total flux cleaned = -0.00150795 Jy
! Component: 200  -  total flux cleaned = -0.00185503 Jy
! Component: 250  -  total flux cleaned = -0.00210675 Jy
! Component: 300  -  total flux cleaned = -0.00239039 Jy
! Component: 350  -  total flux cleaned = -0.00250807 Jy
! Component: 400  -  total flux cleaned = -0.00262183 Jy
! Component: 450  -  total flux cleaned = -0.00280727 Jy
! Component: 500  -  total flux cleaned = -0.00291557 Jy
! Component: 550  -  total flux cleaned = -0.00302168 Jy
! Component: 600  -  total flux cleaned = -0.00316008 Jy
! Component: 650  -  total flux cleaned = -0.00326172 Jy
! Component: 700  -  total flux cleaned = -0.00329544 Jy
! Component: 750  -  total flux cleaned = -0.00336115 Jy
! Component: 800  -  total flux cleaned = -0.00336172 Jy
! Component: 850  -  total flux cleaned = -0.00345616 Jy
! Component: 900  -  total flux cleaned = -0.00345584 Jy
! Component: 950  -  total flux cleaned = -0.00354794 Jy
! Component: 1000  -  total flux cleaned = -0.00360815 Jy
! Component: 1050  -  total flux cleaned = -0.00375622 Jy
! Component: 1100  -  total flux cleaned = -0.00372736 Jy
! Component: 1150  -  total flux cleaned = -0.00375573 Jy
! Component: 1200  -  total flux cleaned = -0.00375564 Jy
! Component: 1250  -  total flux cleaned = -0.00372793 Jy
! Component: 1300  -  total flux cleaned = -0.00375575 Jy
! Component: 1350  -  total flux cleaned = -0.00381006 Jy
! Component: 1400  -  total flux cleaned = -0.0038097 Jy
! Component: 1450  -  total flux cleaned = -0.00378271 Jy
! Component: 1500  -  total flux cleaned = -0.00380949 Jy
! Component: 1550  -  total flux cleaned = -0.00380975 Jy
! Component: 1600  -  total flux cleaned = -0.00386131 Jy
! Component: 1650  -  total flux cleaned = -0.00383548 Jy
! Component: 1700  -  total flux cleaned = -0.0037342 Jy
! Component: 1750  -  total flux cleaned = -0.00378434 Jy
! Component: 1800  -  total flux cleaned = -0.00385822 Jy
! Component: 1850  -  total flux cleaned = -0.00383372 Jy
! Component: 1900  -  total flux cleaned = -0.003834 Jy
! Component: 1950  -  total flux cleaned = -0.00395474 Jy
! Component: 2000  -  total flux cleaned = -0.00397867 Jy
! Component: 2050  -  total flux cleaned = -0.00397898 Jy
! Component: 2100  -  total flux cleaned = -0.00397893 Jy
! Component: 2150  -  total flux cleaned = -0.0040025 Jy
! Component: 2200  -  total flux cleaned = -0.00395635 Jy
! Component: 2250  -  total flux cleaned = -0.00400213 Jy
! Component: 2300  -  total flux cleaned = -0.0038889 Jy
! Component: 2350  -  total flux cleaned = -0.00397851 Jy
! Component: 2400  -  total flux cleaned = -0.00400055 Jy
! Component: 2450  -  total flux cleaned = -0.00386781 Jy
! Component: 2500  -  total flux cleaned = -0.00391182 Jy
! Component: 2550  -  total flux cleaned = -0.0038683 Jy
! Component: 2600  -  total flux cleaned = -0.00397595 Jy
! Component: 2650  -  total flux cleaned = -0.00384715 Jy
! Component: 2700  -  total flux cleaned = -0.00386861 Jy
! Component: 2750  -  total flux cleaned = -0.00386846 Jy
! Component: 2800  -  total flux cleaned = -0.00395221 Jy
! Component: 2850  -  total flux cleaned = -0.00391042 Jy
! Component: 2900  -  total flux cleaned = -0.0039519 Jy
! Component: 2950  -  total flux cleaned = -0.00393165 Jy
! Component: 3000  -  total flux cleaned = -0.00405404 Jy
! Component: 3050  -  total flux cleaned = -0.00409454 Jy
! Component: 3100  -  total flux cleaned = -0.00415482 Jy
! Component: 3150  -  total flux cleaned = -0.00417493 Jy
! Component: 3200  -  total flux cleaned = -0.00419491 Jy
! Component: 3250  -  total flux cleaned = -0.00421461 Jy
! Component: 3300  -  total flux cleaned = -0.00429292 Jy
! Component: 3350  -  total flux cleaned = -0.00437089 Jy
! Component: 3400  -  total flux cleaned = -0.00444801 Jy
! Component: 3450  -  total flux cleaned = -0.00439005 Jy
! Component: 3500  -  total flux cleaned = -0.00435196 Jy
! Component: 3550  -  total flux cleaned = -0.00444657 Jy
! Component: 3600  -  total flux cleaned = -0.0044089 Jy
! Component: 3650  -  total flux cleaned = -0.00444626 Jy
! Component: 3700  -  total flux cleaned = -0.00446484 Jy
! Component: 3750  -  total flux cleaned = -0.00444633 Jy
! Component: 3800  -  total flux cleaned = -0.00450152 Jy
! Component: 3850  -  total flux cleaned = -0.00455631 Jy
! Component: 3900  -  total flux cleaned = -0.0045381 Jy
! Component: 3950  -  total flux cleaned = -0.00459243 Jy
! Component: 4000  -  total flux cleaned = -0.00450252 Jy
! Component: 4050  -  total flux cleaned = -0.00455645 Jy
! Total flux subtracted in 4096 components = -0.00457418 Jy
! Clean residual min=-0.001081 max=0.000947 Jy/beam
! Clean residual mean=-0.000002 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.346223 Jy
keep
! Adding 318 model components to the UV plane model.
! The established model now contains 483 components and 0.346223 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1537+8154_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.248 x 10.66 at -2.306 degrees (North through East)
! Clean map  min=-0.0023718  max=0.15673 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1537+8154_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.156727 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000336361 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.643848 0.643848 1.2877 2.57539 5.15078 10.3016 20.6031 41.2063 82.4126
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.156 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1537+8154_S_uvs.log closed on Wed Sep 25 00:12:09 2013