! Started logfile: /g0/scr/pima/npcsb_uvs/J1523+7645_S_uvs.log on Wed Sep 25 00:11:57 2013 obs /g0/scr/pima/npcsb_uvs/J1523+7645_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1523+7645_S_uva.fits ! AN table 1: 47 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.9 visibilities/baseline/integration-bin. ! Found source: J1523+7645 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23693e+09 8e+06 1 8e+06 ! 02 2 2.26693e+09 8e+06 1 8e+06 ! 03 3 2.35693e+09 8e+06 1 8e+06 ! 04 4 2.37693e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 1692 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1523+7645_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.001995Jy sigma=2.270222 ! Fit after self-cal, rms=0.937761Jy sigma=2.123726 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=14.78 mas, bmaj=40.43 mas, bpa=28.65 degrees ! Estimated noise=8.16921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.050172 Jy ! Component: 100 - total flux cleaned = 0.0580769 Jy ! Total flux subtracted in 100 components = 0.0580769 Jy ! Clean residual min=-0.005751 max=0.005844 Jy/beam ! Clean residual mean=0.000010 rms=0.002579 Jy/beam ! Combined flux in latest and established models = 0.0580769 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0580769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079584Jy sigma=0.158692 ! Fit after self-cal, rms=0.079028Jy sigma=0.157262 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=14.6 mas, bmaj=39.77 mas, bpa=24.21 degrees ! Estimated noise=7.81661 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186832 Jy ! Component: 100 - total flux cleaned = 0.00161995 Jy ! Component: 150 - total flux cleaned = 0.000674701 Jy ! Component: 200 - total flux cleaned = -0.000576145 Jy ! Total flux subtracted in 200 components = -0.000576145 Jy ! Clean residual min=-0.002348 max=0.002336 Jy/beam ! Clean residual mean=-0.000004 rms=0.001313 Jy/beam ! Combined flux in latest and established models = 0.0575008 Jy ! Performing phase self-cal ! Adding 108 model components to the UV plane model. ! The established model now contains 126 components and 0.0575008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077440Jy sigma=0.154273 ! Fit after self-cal, rms=0.076992Jy sigma=0.153589 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.08 KP 1.02 LA 1.06 OV 1.13 ! PT 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.10 KP 0.91 LA 0.97 OV 1.05 ! PT 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.10 KP 1.07 LA 0.81 OV 1.13 ! PT 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 KP 1.10 LA 0.75 OV 1.00 ! PT 0.87 ! ! ! Fit before self-cal, rms=0.076992Jy sigma=0.153589 ! Fit after self-cal, rms=0.070775Jy sigma=0.152213 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=14.85 mas, bmaj=39.64 mas, bpa=23.62 degrees ! Estimated noise=7.57006 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180551 Jy ! Component: 100 - total flux cleaned = 0.00173383 Jy ! Component: 150 - total flux cleaned = 0.00128464 Jy ! Component: 200 - total flux cleaned = 0.0010338 Jy ! Total flux subtracted in 200 components = 0.0010338 Jy ! Clean residual min=-0.000741 max=0.000741 Jy/beam ! Clean residual mean=0.000003 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.0585346 Jy ! Performing phase self-cal ! Adding 92 model components to the UV plane model. ! The established model now contains 215 components and 0.0585346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070454Jy sigma=0.151657 ! Fit after self-cal, rms=0.070488Jy sigma=0.151238 ! Inverting map ! Added new window around map position (48.5, -58). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000917612 Jy ! Component: 100 - total flux cleaned = 0.00140579 Jy ! Component: 150 - total flux cleaned = 0.00178712 Jy ! Component: 200 - total flux cleaned = 0.00186526 Jy ! Total flux subtracted in 200 components = 0.00186526 Jy ! Clean residual min=-0.000966 max=0.001139 Jy/beam ! Clean residual mean=0.000006 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0603998 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 272 components and 0.0603998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070383Jy sigma=0.151129 ! Fit after self-cal, rms=0.070411Jy sigma=0.151045 ! Inverting map ! Added new window around map position (125.5, 101.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000606293 Jy ! Component: 100 - total flux cleaned = 0.000713047 Jy ! Component: 150 - total flux cleaned = 0.00103187 Jy ! Component: 200 - total flux cleaned = 0.00132989 Jy ! Total flux subtracted in 200 components = 0.00132989 Jy ! Clean residual min=-0.000877 max=0.001254 Jy/beam ! Clean residual mean=0.000005 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.0617297 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 329 components and 0.0617297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070336Jy sigma=0.150956 ! Fit after self-cal, rms=0.070358Jy sigma=0.150909 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070358Jy sigma=0.150909 ! Fit after self-cal, rms=0.069928Jy sigma=0.150835 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.81 mas, bmaj=39.7 mas, bpa=23.67 degrees ! Estimated noise=7.50222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000943657 Jy ! Component: 100 - total flux cleaned = 0.000926681 Jy ! Component: 150 - total flux cleaned = 0.000682071 Jy ! Component: 200 - total flux cleaned = 0.000412285 Jy ! Total flux subtracted in 200 components = 0.000412285 Jy ! Clean residual min=-0.000947 max=0.001212 Jy/beam ! Clean residual mean=0.000004 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.062142 Jy selfcal ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 386 components and 0.062142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069876Jy sigma=0.150789 ! Fit after self-cal, rms=0.069943Jy sigma=0.150701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000532462 Jy ! Component: 100 - total flux cleaned = 0.00060209 Jy ! Component: 150 - total flux cleaned = 0.000453355 Jy ! Component: 200 - total flux cleaned = 0.000326214 Jy ! Total flux subtracted in 200 components = 0.000326214 Jy ! Clean residual min=-0.000903 max=0.001029 Jy/beam ! Clean residual mean=0.000003 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.0624682 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 439 components and 0.0624682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069889Jy sigma=0.150647 ! Fit after self-cal, rms=0.069874Jy sigma=0.150617 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069874Jy sigma=0.150617 ! Fit after self-cal, rms=0.069756Jy sigma=0.150573 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.74 mas, bmaj=39.79 mas, bpa=23.74 degrees ! Estimated noise=7.48351 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105864 Jy ! Component: 100 - total flux cleaned = 0.000963562 Jy ! Component: 150 - total flux cleaned = 0.000832363 Jy ! Component: 200 - total flux cleaned = 0.000611409 Jy ! Total flux subtracted in 200 components = 0.000611409 Jy ! Clean residual min=-0.000876 max=0.000886 Jy/beam ! Clean residual mean=0.000003 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.0630796 Jy selfcal ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 490 components and 0.0630797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069708Jy sigma=0.150527 ! Fit after self-cal, rms=0.069667Jy sigma=0.150452 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000605599 Jy ! Component: 100 - total flux cleaned = 0.000711066 Jy ! Component: 150 - total flux cleaned = 0.000653264 Jy ! Component: 200 - total flux cleaned = 0.00054824 Jy ! Total flux subtracted in 200 components = 0.00054824 Jy ! Clean residual min=-0.001011 max=0.001055 Jy/beam ! Clean residual mean=0.000003 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.0636279 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 534 components and 0.0636279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069620Jy sigma=0.150407 ! Fit after self-cal, rms=0.069600Jy sigma=0.150382 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069600Jy sigma=0.150382 ! Fit after self-cal, rms=0.069162Jy sigma=0.150343 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=15.13 mas, bmaj=39.38 mas, bpa=23.82 degrees ! Estimated noise=7.46104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000590434 Jy ! Component: 100 - total flux cleaned = 0.000433428 Jy ! Component: 150 - total flux cleaned = 0.000280252 Jy ! Component: 200 - total flux cleaned = 0.000346224 Jy ! Total flux subtracted in 200 components = 0.000346224 Jy ! Clean residual min=-0.000940 max=0.000881 Jy/beam ! Clean residual mean=0.000003 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.0639741 Jy selfcal ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 588 components and 0.0639741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069115Jy sigma=0.150302 ! Fit after self-cal, rms=0.069039Jy sigma=0.150264 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000524662 Jy ! Component: 100 - total flux cleaned = 0.000466649 Jy ! Component: 150 - total flux cleaned = 0.000291347 Jy ! Component: 200 - total flux cleaned = 0.000113449 Jy ! Total flux subtracted in 200 components = 0.000113449 Jy ! Clean residual min=-0.000858 max=0.000934 Jy/beam ! Clean residual mean=0.000002 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.0640875 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 616 components and 0.0640876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069005Jy sigma=0.150233 ! Fit after self-cal, rms=0.068978Jy sigma=0.150217 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=14.67 mas, bmaj=39.8 mas, bpa=23.76 degrees ! Estimated noise=7.45253 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 14.67 x 39.8 at 23.76 degrees (North through East) ! Clean map min=-0.0057371 max=0.056107 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=14.86 mas, bmaj=40.36 mas, bpa=28.01 degrees ! Estimated noise=7.87921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0391061 Jy ! Component: 100 - total flux cleaned = 0.0501286 Jy ! Component: 150 - total flux cleaned = 0.0592474 Jy ! Component: 200 - total flux cleaned = 0.0659868 Jy ! Total flux subtracted in 200 components = 0.0659868 Jy ! Clean residual min=-0.014290 max=0.012640 Jy/beam ! Clean residual mean=-0.000006 rms=0.003490 Jy/beam ! Combined flux in latest and established models = 0.0659868 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 79 model components to the UV plane model. ! The established model now contains 79 components and 0.0659868 Jy ! Inverting map and beam ! Estimated beam: bmin=14.67 mas, bmaj=39.8 mas, bpa=23.76 degrees ! Estimated noise=7.45253 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00406319 Jy ! Component: 100 - total flux cleaned = 0.00799841 Jy ! Component: 150 - total flux cleaned = 0.0121159 Jy ! Component: 200 - total flux cleaned = 0.0151561 Jy ! Total flux subtracted in 200 components = 0.0151561 Jy ! Clean residual min=-0.008388 max=0.009750 Jy/beam ! Clean residual mean=0.000001 rms=0.002417 Jy/beam ! Combined flux in latest and established models = 0.0811429 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 127 components and 0.0811429 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=15.13 mas, bmaj=39.38 mas, bpa=23.82 degrees ! Estimated noise=7.46104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325112 Jy ! Component: 100 - total flux cleaned = 0.00597689 Jy ! Component: 150 - total flux cleaned = 0.00820279 Jy ! Component: 200 - total flux cleaned = 0.0102086 Jy ! Total flux subtracted in 200 components = 0.0102086 Jy ! Clean residual min=-0.006689 max=0.008280 Jy/beam ! Clean residual mean=0.000002 rms=0.001926 Jy/beam ! Combined flux in latest and established models = 0.0913514 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-47.5, 95). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209021 Jy ! Component: 100 - total flux cleaned = 0.00168214 Jy ! Component: 150 - total flux cleaned = 0.00168004 Jy ! Component: 200 - total flux cleaned = 0.00184863 Jy ! Total flux subtracted in 200 components = 0.00184863 Jy ! Clean residual min=-0.003504 max=0.003894 Jy/beam ! Clean residual mean=0.000001 rms=0.001120 Jy/beam ! Combined flux in latest and established models = 0.0932 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 214 components and 0.0932 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=14.67 mas, bmaj=39.8 mas, bpa=23.76 degrees ! Estimated noise=7.45253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342388 Jy ! Component: 100 - total flux cleaned = 0.00049192 Jy ! Component: 150 - total flux cleaned = 0.00075639 Jy ! Component: 200 - total flux cleaned = 0.000876851 Jy ! Total flux subtracted in 200 components = 0.000876851 Jy ! Clean residual min=-0.002646 max=0.003141 Jy/beam ! Clean residual mean=0.000004 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.0940768 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 249 components and 0.0940768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069635Jy sigma=0.151613 ! Fit after self-cal, rms=0.069087Jy sigma=0.150623 wmodel /g0/scr/pima/npcsb_uvs/J1523+7645_S_map.mod ! Writing 249 model components to file: /g0/scr/pima/npcsb_uvs/J1523+7645_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J1523+7645_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1523+7645_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1523+7645_S_map.win ! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J1523+7645_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.43464e-05 Jy ! Component: 100 - total flux cleaned = 1.11981e-05 Jy ! Component: 150 - total flux cleaned = 0.000252799 Jy ! Component: 200 - total flux cleaned = 0.000293635 Jy ! Component: 250 - total flux cleaned = 0.000351397 Jy ! Component: 300 - total flux cleaned = 0.000423332 Jy ! Component: 350 - total flux cleaned = 0.000457276 Jy ! Component: 400 - total flux cleaned = 0.000474081 Jy ! Component: 450 - total flux cleaned = 0.000521669 Jy ! Component: 500 - total flux cleaned = 0.000567434 Jy ! Component: 550 - total flux cleaned = 0.000612254 Jy ! Component: 600 - total flux cleaned = 0.000655963 Jy ! Component: 650 - total flux cleaned = 0.000684536 Jy ! Component: 700 - total flux cleaned = 0.000698836 Jy ! Component: 750 - total flux cleaned = 0.000685047 Jy ! Component: 800 - total flux cleaned = 0.00065742 Jy ! Component: 850 - total flux cleaned = 0.000630152 Jy ! Component: 900 - total flux cleaned = 0.000576499 Jy ! Component: 950 - total flux cleaned = 0.000536589 Jy ! Component: 1000 - total flux cleaned = 0.000510215 Jy ! Component: 1050 - total flux cleaned = 0.000431871 Jy ! Component: 1100 - total flux cleaned = 0.000380074 Jy ! Component: 1150 - total flux cleaned = 0.000315757 Jy ! Component: 1200 - total flux cleaned = 0.000251698 Jy ! Component: 1250 - total flux cleaned = 0.000226189 Jy ! Component: 1300 - total flux cleaned = 0.00020062 Jy ! Component: 1350 - total flux cleaned = 0.000213451 Jy ! Component: 1400 - total flux cleaned = 0.000162356 Jy ! Component: 1450 - total flux cleaned = 0.000136804 Jy ! Component: 1500 - total flux cleaned = 8.53182e-05 Jy ! Component: 1550 - total flux cleaned = 2.06652e-05 Jy ! Component: 1600 - total flux cleaned = -1.83114e-05 Jy ! Component: 1650 - total flux cleaned = -7.0769e-05 Jy ! Component: 1700 - total flux cleaned = -0.000110309 Jy ! Component: 1750 - total flux cleaned = -0.000176894 Jy ! Component: 1800 - total flux cleaned = -0.000230943 Jy ! Component: 1850 - total flux cleaned = -0.000326428 Jy ! Component: 1900 - total flux cleaned = -0.000423145 Jy ! Component: 1950 - total flux cleaned = -0.000520796 Jy ! Component: 2000 - total flux cleaned = -0.000633851 Jy ! Component: 2050 - total flux cleaned = -0.00074834 Jy ! Component: 2100 - total flux cleaned = -0.000850093 Jy ! Component: 2150 - total flux cleaned = -0.000953137 Jy ! Component: 2200 - total flux cleaned = -0.00107236 Jy ! Component: 2250 - total flux cleaned = -0.00117804 Jy ! Component: 2300 - total flux cleaned = -0.00128528 Jy ! Component: 2350 - total flux cleaned = -0.0013944 Jy ! Component: 2400 - total flux cleaned = -0.00147346 Jy ! Component: 2450 - total flux cleaned = -0.00156943 Jy ! Component: 2500 - total flux cleaned = -0.00165056 Jy ! Component: 2550 - total flux cleaned = -0.0017659 Jy ! Component: 2600 - total flux cleaned = -0.00186629 Jy ! Component: 2650 - total flux cleaned = -0.00196821 Jy ! Component: 2700 - total flux cleaned = -0.00205421 Jy ! Component: 2750 - total flux cleaned = -0.00217669 Jy ! Component: 2800 - total flux cleaned = -0.00230125 Jy ! Component: 2850 - total flux cleaned = -0.00246415 Jy ! Component: 2900 - total flux cleaned = -0.00263001 Jy ! Component: 2950 - total flux cleaned = -0.00277994 Jy ! Component: 3000 - total flux cleaned = -0.0029517 Jy ! Component: 3050 - total flux cleaned = -0.00306863 Jy ! Component: 3100 - total flux cleaned = -0.0032268 Jy ! Component: 3150 - total flux cleaned = -0.00338798 Jy ! Component: 3200 - total flux cleaned = -0.00355239 Jy ! Component: 3250 - total flux cleaned = -0.00374203 Jy ! Component: 3300 - total flux cleaned = -0.00389285 Jy ! Component: 3350 - total flux cleaned = -0.00406931 Jy ! Component: 3400 - total flux cleaned = -0.0042501 Jy ! Component: 3450 - total flux cleaned = -0.00441186 Jy ! Component: 3500 - total flux cleaned = -0.0045537 Jy ! Component: 3550 - total flux cleaned = -0.00469948 Jy ! Component: 3600 - total flux cleaned = -0.00484866 Jy ! Component: 3650 - total flux cleaned = -0.00502693 Jy ! Component: 3700 - total flux cleaned = -0.00515748 Jy ! Component: 3750 - total flux cleaned = -0.00534499 Jy ! Component: 3800 - total flux cleaned = -0.00551011 Jy ! Component: 3850 - total flux cleaned = -0.00567893 Jy ! Component: 3900 - total flux cleaned = -0.005881 Jy ! Component: 3950 - total flux cleaned = -0.00605872 Jy ! Component: 4000 - total flux cleaned = -0.00627166 Jy ! Component: 4050 - total flux cleaned = -0.00645952 Jy ! Total flux subtracted in 4096 components = -0.00661948 Jy ! Clean residual min=-0.001791 max=0.001744 Jy/beam ! Clean residual mean=0.000011 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.0874574 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 566 components and 0.0874574 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1523+7645_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 14.67 x 39.8 at 23.76 degrees (North through East) ! Clean map min=-0.0081743 max=0.023395 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1523+7645_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0233949 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000586735 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -7.5239 7.5239 15.0478 30.0956 60.1912 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.023 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1523+7645_S_uvs.log closed on Wed Sep 25 00:12:03 2013