! Started logfile: /g0/scr/pima/npcsb_uvs/J1522+7645_X_uvs.log on Wed Sep 25 00:06:11 2013
obs /g0/scr/pima/npcsb_uvs/J1522+7645_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1522+7645_X_uva.fits
! AN table 1: 47 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.666667 visibilities/baseline/integration-bin.
! Found source: J1522+7645
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40993e+09        8e+06          1        8e+06
!  02        2  8.47993e+09        8e+06          1        8e+06
!  03        3  8.79493e+09        8e+06          1        8e+06
!  04        4  8.89993e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4512 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1522+7645_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.004842Jy  sigma=2.038825
! Fit after  self-cal, rms=0.943531Jy  sigma=1.914229
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.145 mas, bmaj=3.205 mas, bpa=-5.343 degrees
! Estimated noise=8.93921 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0487191 Jy
! Component: 100  -  total flux cleaned = 0.0577862 Jy
! Total flux subtracted in 100 components = 0.0577862 Jy
! Clean residual min=-0.007046 max=0.007109 Jy/beam
! Clean residual mean=-0.000007 rms=0.001809 Jy/beam
! Combined flux in latest and established models = 0.0577862 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0577862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089129Jy  sigma=0.169701
! Fit after  self-cal, rms=0.087481Jy  sigma=0.166394
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.547 mas, bmaj=3.306 mas, bpa=-5.492 degrees
! Estimated noise=5.30367 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0037246 Jy
! Component: 100  -  total flux cleaned = 0.00416003 Jy
! Component: 150  -  total flux cleaned = 0.00433003 Jy
! Component: 200  -  total flux cleaned = 0.00433086 Jy
! Total flux subtracted in 200 components = 0.00433086 Jy
! Clean residual min=-0.004867 max=0.003792 Jy/beam
! Clean residual mean=-0.000002 rms=0.001137 Jy/beam
! Combined flux in latest and established models = 0.062117 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 18 components and 0.062117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087289Jy  sigma=0.166013
! Fit after  self-cal, rms=0.087278Jy  sigma=0.165977
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.08     HN        0.97     KP        0.96     
!   LA        0.94     NL        1.14     OV        1.01     PT        1.04     
!   SC        0.86     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.08     HN        0.93     KP        0.96     
!   LA        0.90     NL        1.03     OV        1.17     PT        1.04     
!   SC        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.05     HN        0.78     KP        0.88     
!   LA        0.91     NL        1.01     OV        0.98     PT        1.01     
!   SC        0.77     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.81     FD        0.88     HN        0.81     KP        1.07     
!   LA        0.95     NL        0.93     OV        1.03     PT        1.16     
!   SC        0.76     
! 
! 
! Fit before self-cal, rms=0.087278Jy  sigma=0.165977
! Fit after  self-cal, rms=0.083814Jy  sigma=0.165104
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.485 mas, bmaj=3.267 mas, bpa=-4.82 degrees
! Estimated noise=5.14817 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000568298 Jy
! Component: 100  -  total flux cleaned = 0.000826887 Jy
! Component: 150  -  total flux cleaned = 0.0010141 Jy
! Component: 200  -  total flux cleaned = 0.00113654 Jy
! Total flux subtracted in 200 components = 0.00113654 Jy
! Clean residual min=-0.003555 max=0.003385 Jy/beam
! Clean residual mean=-0.000001 rms=0.000873 Jy/beam
! Combined flux in latest and established models = 0.0632536 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 31 components and 0.0632536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083776Jy  sigma=0.165059
! Fit after  self-cal, rms=0.083855Jy  sigma=0.164777
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083855Jy  sigma=0.164777
! Fit after  self-cal, rms=0.083427Jy  sigma=0.164693
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.473 mas, bmaj=3.236 mas, bpa=-4.673 degrees
! Estimated noise=5.07047 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000311332 Jy
! Component: 100  -  total flux cleaned = 0.000509639 Jy
! Component: 150  -  total flux cleaned = 0.000719038 Jy
! Component: 200  -  total flux cleaned = 0.000831716 Jy
! Total flux subtracted in 200 components = 0.000831716 Jy
! Clean residual min=-0.003539 max=0.003155 Jy/beam
! Clean residual mean=-0.000001 rms=0.000840 Jy/beam
! Combined flux in latest and established models = 0.0640853 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 38 components and 0.0640853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083392Jy  sigma=0.164663
! Fit after  self-cal, rms=0.083452Jy  sigma=0.164582
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000397778 Jy
! Component: 100  -  total flux cleaned = 0.000375992 Jy
! Component: 150  -  total flux cleaned = 0.000376326 Jy
! Component: 200  -  total flux cleaned = 0.000363945 Jy
! Total flux subtracted in 200 components = 0.000363945 Jy
! Clean residual min=-0.003696 max=0.003178 Jy/beam
! Clean residual mean=-0.000001 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.0644492 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 44 components and 0.0644492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083442Jy  sigma=0.164569
! Fit after  self-cal, rms=0.083442Jy  sigma=0.164562
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083442Jy  sigma=0.164562
! Fit after  self-cal, rms=0.083608Jy  sigma=0.164488
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.465 mas, bmaj=3.21 mas, bpa=-4.646 degrees
! Estimated noise=5.05048 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000936785 Jy
! Component: 100  -  total flux cleaned = 0.00115847 Jy
! Component: 150  -  total flux cleaned = 0.00126053 Jy
! Component: 200  -  total flux cleaned = 0.0013036 Jy
! Total flux subtracted in 200 components = 0.0013036 Jy
! Clean residual min=-0.003679 max=0.003024 Jy/beam
! Clean residual mean=-0.000001 rms=0.000836 Jy/beam
! Combined flux in latest and established models = 0.0657528 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 46 components and 0.0657528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083593Jy  sigma=0.164464
! Fit after  self-cal, rms=0.083634Jy  sigma=0.164450
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.7656e-05 Jy
! Component: 100  -  total flux cleaned = 8.02994e-05 Jy
! Component: 150  -  total flux cleaned = 9.27653e-05 Jy
! Component: 200  -  total flux cleaned = 9.25661e-05 Jy
! Total flux subtracted in 200 components = 9.25661e-05 Jy
! Clean residual min=-0.003730 max=0.003043 Jy/beam
! Clean residual mean=-0.000001 rms=0.000844 Jy/beam
! Combined flux in latest and established models = 0.0658454 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 49 components and 0.0658454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083627Jy  sigma=0.164439
! Fit after  self-cal, rms=0.083639Jy  sigma=0.164431
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083639Jy  sigma=0.164431
! Fit after  self-cal, rms=0.083477Jy  sigma=0.164362
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.501 mas, bmaj=3.422 mas, bpa=2.016 degrees
! Estimated noise=5.54294 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120212 Jy
! Component: 100  -  total flux cleaned = 0.00118251 Jy
! Component: 150  -  total flux cleaned = 0.0011639 Jy
! Component: 200  -  total flux cleaned = 0.00114686 Jy
! Total flux subtracted in 200 components = 0.00114686 Jy
! Clean residual min=-0.004120 max=0.003082 Jy/beam
! Clean residual mean=-0.000001 rms=0.000957 Jy/beam
! Combined flux in latest and established models = 0.0669922 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 56 components and 0.0669922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083463Jy  sigma=0.164350
! Fit after  self-cal, rms=0.083478Jy  sigma=0.164302
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.26357e-05 Jy
! Component: 100  -  total flux cleaned = -0.00012348 Jy
! Component: 150  -  total flux cleaned = -0.000181887 Jy
! Component: 200  -  total flux cleaned = -0.00018217 Jy
! Total flux subtracted in 200 components = -0.00018217 Jy
! Clean residual min=-0.004285 max=0.003038 Jy/beam
! Clean residual mean=-0.000002 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.0668101 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 58 components and 0.06681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083470Jy  sigma=0.164293
! Fit after  self-cal, rms=0.083465Jy  sigma=0.164270
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.46 mas, bmaj=3.187 mas, bpa=-4.624 degrees
! Estimated noise=5.02019 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.46 x 3.187 at -4.624 degrees (North through East)
! Clean map  min=-0.0036022  max=0.059594 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.079 mas, bmaj=3.118 mas, bpa=-4.605 degrees
! Estimated noise=8.12703 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0459906 Jy
! Component: 100  -  total flux cleaned = 0.0563724 Jy
! Component: 150  -  total flux cleaned = 0.0603479 Jy
! Component: 200  -  total flux cleaned = 0.0619876 Jy
! Total flux subtracted in 200 components = 0.0619876 Jy
! Clean residual min=-0.004362 max=0.004571 Jy/beam
! Clean residual mean=-0.000005 rms=0.001189 Jy/beam
! Combined flux in latest and established models = 0.0619876 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0619876 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.46 mas, bmaj=3.187 mas, bpa=-4.624 degrees
! Estimated noise=5.02019 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (31.6, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00400412 Jy
! Component: 100  -  total flux cleaned = 0.0048376 Jy
! Component: 150  -  total flux cleaned = 0.00492049 Jy
! Component: 200  -  total flux cleaned = 0.00486602 Jy
! Total flux subtracted in 200 components = 0.00486602 Jy
! Clean residual min=-0.003658 max=0.003207 Jy/beam
! Clean residual mean=-0.000001 rms=0.000820 Jy/beam
! Combined flux in latest and established models = 0.0668536 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 43 components and 0.0668536 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.501 mas, bmaj=3.422 mas, bpa=2.016 degrees
! Estimated noise=5.54294 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000559507 Jy
! Component: 100  -  total flux cleaned = 0.000516114 Jy
! Component: 150  -  total flux cleaned = 0.00039657 Jy
! Component: 200  -  total flux cleaned = 0.000256314 Jy
! Total flux subtracted in 200 components = 0.000256314 Jy
! Clean residual min=-0.004283 max=0.003267 Jy/beam
! Clean residual mean=-0.000001 rms=0.000919 Jy/beam
! Combined flux in latest and established models = 0.0671099 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.20376e-05 Jy
! Component: 100  -  total flux cleaned = -0.000119475 Jy
! Component: 150  -  total flux cleaned = -0.00017228 Jy
! Component: 200  -  total flux cleaned = -0.000220884 Jy
! Total flux subtracted in 200 components = -0.000220884 Jy
! Clean residual min=-0.004157 max=0.003186 Jy/beam
! Clean residual mean=-0.000002 rms=0.000896 Jy/beam
! Combined flux in latest and established models = 0.0668891 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 66 components and 0.0668891 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.46 mas, bmaj=3.187 mas, bpa=-4.624 degrees
! Estimated noise=5.02019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.45459e-05 Jy
! Component: 100  -  total flux cleaned = -0.000124915 Jy
! Component: 150  -  total flux cleaned = -0.000238045 Jy
! Component: 200  -  total flux cleaned = -0.000340593 Jy
! Total flux subtracted in 200 components = -0.000340593 Jy
! Clean residual min=-0.003411 max=0.002911 Jy/beam
! Clean residual mean=-0.000001 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.0665485 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 83 components and 0.0665485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083333Jy  sigma=0.164030
! Fit after  self-cal, rms=0.083245Jy  sigma=0.163918
wmodel /g0/scr/pima/npcsb_uvs/J1522+7645_X_map.mod
! Writing 83 model components to file: /g0/scr/pima/npcsb_uvs/J1522+7645_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1522+7645_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1522+7645_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1522+7645_X_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J1522+7645_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00117947 Jy
! Component: 100  -  total flux cleaned = -0.00169803 Jy
! Component: 150  -  total flux cleaned = -0.00179002 Jy
! Component: 200  -  total flux cleaned = -0.0018325 Jy
! Component: 250  -  total flux cleaned = -0.00191623 Jy
! Component: 300  -  total flux cleaned = -0.00203449 Jy
! Component: 350  -  total flux cleaned = -0.00203414 Jy
! Component: 400  -  total flux cleaned = -0.00203438 Jy
! Component: 450  -  total flux cleaned = -0.00207011 Jy
! Component: 500  -  total flux cleaned = -0.00217215 Jy
! Component: 550  -  total flux cleaned = -0.0023036 Jy
! Component: 600  -  total flux cleaned = -0.00236713 Jy
! Component: 650  -  total flux cleaned = -0.0023045 Jy
! Component: 700  -  total flux cleaned = -0.00233535 Jy
! Component: 750  -  total flux cleaned = -0.00242388 Jy
! Component: 800  -  total flux cleaned = -0.00242285 Jy
! Component: 850  -  total flux cleaned = -0.0024795 Jy
! Component: 900  -  total flux cleaned = -0.00261738 Jy
! Component: 950  -  total flux cleaned = -0.00267167 Jy
! Component: 1000  -  total flux cleaned = -0.00293928 Jy
! Component: 1050  -  total flux cleaned = -0.00312344 Jy
! Component: 1100  -  total flux cleaned = -0.00335651 Jy
! Component: 1150  -  total flux cleaned = -0.00356006 Jy
! Component: 1200  -  total flux cleaned = -0.00376114 Jy
! Component: 1250  -  total flux cleaned = -0.00395979 Jy
! Component: 1300  -  total flux cleaned = -0.00410684 Jy
! Component: 1350  -  total flux cleaned = -0.00432463 Jy
! Component: 1400  -  total flux cleaned = -0.00451604 Jy
! Component: 1450  -  total flux cleaned = -0.00472885 Jy
! Component: 1500  -  total flux cleaned = -0.00491583 Jy
! Component: 1550  -  total flux cleaned = -0.00514701 Jy
! Component: 1600  -  total flux cleaned = -0.00532982 Jy
! Component: 1650  -  total flux cleaned = -0.00560119 Jy
! Component: 1700  -  total flux cleaned = -0.00582481 Jy
! Component: 1750  -  total flux cleaned = -0.00606854 Jy
! Component: 1800  -  total flux cleaned = -0.00624403 Jy
! Component: 1850  -  total flux cleaned = -0.0064397 Jy
! Component: 1900  -  total flux cleaned = -0.00661206 Jy
! Component: 1950  -  total flux cleaned = -0.00674027 Jy
! Component: 2000  -  total flux cleaned = -0.00682504 Jy
! Component: 2050  -  total flux cleaned = -0.00690933 Jy
! Component: 2100  -  total flux cleaned = -0.00695124 Jy
! Component: 2150  -  total flux cleaned = -0.00699289 Jy
! Component: 2200  -  total flux cleaned = -0.00705506 Jy
! Component: 2250  -  total flux cleaned = -0.00715777 Jy
! Component: 2300  -  total flux cleaned = -0.00715784 Jy
! Component: 2350  -  total flux cleaned = -0.00725945 Jy
! Component: 2400  -  total flux cleaned = -0.00736026 Jy
! Component: 2450  -  total flux cleaned = -0.00734019 Jy
! Component: 2500  -  total flux cleaned = -0.0074001 Jy
! Component: 2550  -  total flux cleaned = -0.00740007 Jy
! Component: 2600  -  total flux cleaned = -0.0074595 Jy
! Component: 2650  -  total flux cleaned = -0.00745952 Jy
! Component: 2700  -  total flux cleaned = -0.00745958 Jy
! Component: 2750  -  total flux cleaned = -0.0074791 Jy
! Component: 2800  -  total flux cleaned = -0.00749867 Jy
! Component: 2850  -  total flux cleaned = -0.00751808 Jy
! Component: 2900  -  total flux cleaned = -0.00757603 Jy
! Component: 2950  -  total flux cleaned = -0.00757603 Jy
! Component: 3000  -  total flux cleaned = -0.00755694 Jy
! Component: 3050  -  total flux cleaned = -0.00757596 Jy
! Component: 3100  -  total flux cleaned = -0.00765212 Jy
! Component: 3150  -  total flux cleaned = -0.00770896 Jy
! Component: 3200  -  total flux cleaned = -0.00770899 Jy
! Component: 3250  -  total flux cleaned = -0.00774675 Jy
! Component: 3300  -  total flux cleaned = -0.00772786 Jy
! Component: 3350  -  total flux cleaned = -0.0077466 Jy
! Component: 3400  -  total flux cleaned = -0.00770902 Jy
! Component: 3450  -  total flux cleaned = -0.00770905 Jy
! Component: 3500  -  total flux cleaned = -0.00767147 Jy
! Component: 3550  -  total flux cleaned = -0.00763409 Jy
! Component: 3600  -  total flux cleaned = -0.00765276 Jy
! Component: 3650  -  total flux cleaned = -0.007634 Jy
! Component: 3700  -  total flux cleaned = -0.00765265 Jy
! Component: 3750  -  total flux cleaned = -0.00765264 Jy
! Component: 3800  -  total flux cleaned = -0.00765265 Jy
! Component: 3850  -  total flux cleaned = -0.00767136 Jy
! Component: 3900  -  total flux cleaned = -0.00767129 Jy
! Component: 3950  -  total flux cleaned = -0.00767121 Jy
! Component: 4000  -  total flux cleaned = -0.00765248 Jy
! Component: 4050  -  total flux cleaned = -0.00765256 Jy
! Total flux subtracted in 4096 components = -0.00763369 Jy
! Clean residual min=-0.001115 max=0.001025 Jy/beam
! Clean residual mean=-0.000006 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.0589148 Jy
keep
! Adding 265 model components to the UV plane model.
! The established model now contains 348 components and 0.0589148 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1522+7645_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.46 x 3.187 at -4.624 degrees (North through East)
! Clean map  min=-0.0035555  max=0.05861 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1522+7645_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0586101 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000312987 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.60205 1.60205 3.20409 6.40819 12.8164 25.6328 51.2655
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0009 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.058 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1522+7645_X_uvs.log closed on Wed Sep 25 00:06:16 2013