! Started logfile: /g0/scr/pima/npcsb_uvs/J1522+7645_S_uvs.log on Wed Sep 25 00:11:52 2013
obs /g0/scr/pima/npcsb_uvs/J1522+7645_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1522+7645_S_uva.fits
! AN table 1: 47 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.785714 visibilities/baseline/integration-bin.
! Found source: J1522+7645
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4136 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1522+7645_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007208Jy  sigma=2.275918
! Fit after  self-cal, rms=0.950979Jy  sigma=2.166697
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.128 mas, bmaj=9.795 mas, bpa=9.842 degrees
! Estimated noise=8.08235 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0407428 Jy
! Component: 100  -  total flux cleaned = 0.0501152 Jy
! Total flux subtracted in 100 components = 0.0501152 Jy
! Clean residual min=-0.007026 max=0.005641 Jy/beam
! Clean residual mean=-0.000001 rms=0.001766 Jy/beam
! Combined flux in latest and established models = 0.0501152 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0501152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082718Jy  sigma=0.171200
! Fit after  self-cal, rms=0.081193Jy  sigma=0.167969
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.329 mas, bmaj=11.48 mas, bpa=16.26 degrees
! Estimated noise=5.0707 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00402559 Jy
! Component: 100  -  total flux cleaned = 0.00538041 Jy
! Component: 150  -  total flux cleaned = 0.00632457 Jy
! Component: 200  -  total flux cleaned = 0.00697904 Jy
! Total flux subtracted in 200 components = 0.00697904 Jy
! Clean residual min=-0.004131 max=0.003382 Jy/beam
! Clean residual mean=-0.000002 rms=0.001053 Jy/beam
! Combined flux in latest and established models = 0.0570942 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 15 components and 0.0570942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080732Jy  sigma=0.167075
! Fit after  self-cal, rms=0.080577Jy  sigma=0.166773
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.06     HN        1.00*    KP        1.04     
!   LA        1.03     NL        1.01     OV        0.99     PT        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.93     HN        1.00*    KP        1.02     
!   LA        0.99     NL        1.07     OV        1.00     PT        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        1.06     HN        1.00*    KP        0.95     
!   LA        0.90     NL        1.00     OV        1.11     PT        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.08     HN        1.00*    KP        0.91     
!   LA        0.67     NL        0.98     OV        1.03     PT        0.96     
! 
! 
! Fit before self-cal, rms=0.080577Jy  sigma=0.166773
! Fit after  self-cal, rms=0.074910Jy  sigma=0.166111
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.373 mas, bmaj=11.46 mas, bpa=18.18 degrees
! Estimated noise=4.9204 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141796 Jy
! Component: 100  -  total flux cleaned = -0.00055366 Jy
! Component: 150  -  total flux cleaned = -0.000732444 Jy
! Component: 200  -  total flux cleaned = -0.000732323 Jy
! Total flux subtracted in 200 components = -0.000732323 Jy
! Clean residual min=-0.003105 max=0.003643 Jy/beam
! Clean residual mean=-0.000002 rms=0.000874 Jy/beam
! Combined flux in latest and established models = 0.0563619 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 29 components and 0.0563619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074800Jy  sigma=0.165886
! Fit after  self-cal, rms=0.074669Jy  sigma=0.165570
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074669Jy  sigma=0.165570
! Fit after  self-cal, rms=0.074115Jy  sigma=0.165535
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.392 mas, bmaj=11.48 mas, bpa=19.03 degrees
! Estimated noise=4.88008 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000192829 Jy
! Component: 100  -  total flux cleaned = -0.000278425 Jy
! Component: 150  -  total flux cleaned = -0.000437308 Jy
! Component: 200  -  total flux cleaned = -0.000469117 Jy
! Total flux subtracted in 200 components = -0.000469117 Jy
! Clean residual min=-0.002972 max=0.003503 Jy/beam
! Clean residual mean=-0.000002 rms=0.000867 Jy/beam
! Combined flux in latest and established models = 0.0558928 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 42 components and 0.0558928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074033Jy  sigma=0.165365
! Fit after  self-cal, rms=0.074003Jy  sigma=0.165277
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.98588e-05 Jy
! Component: 100  -  total flux cleaned = -0.000170028 Jy
! Component: 150  -  total flux cleaned = -0.00023216 Jy
! Component: 200  -  total flux cleaned = -0.000257357 Jy
! Total flux subtracted in 200 components = -0.000257357 Jy
! Clean residual min=-0.003009 max=0.003354 Jy/beam
! Clean residual mean=-0.000002 rms=0.000853 Jy/beam
! Combined flux in latest and established models = 0.0556355 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 49 components and 0.0556355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073962Jy  sigma=0.165189
! Fit after  self-cal, rms=0.073948Jy  sigma=0.165156
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073948Jy  sigma=0.165156
! Fit after  self-cal, rms=0.073988Jy  sigma=0.165128
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.409 mas, bmaj=11.5 mas, bpa=19.42 degrees
! Estimated noise=4.88647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.52611e-05 Jy
! Component: 100  -  total flux cleaned = -0.000287202 Jy
! Component: 150  -  total flux cleaned = -0.000309464 Jy
! Component: 200  -  total flux cleaned = -0.000329182 Jy
! Total flux subtracted in 200 components = -0.000329182 Jy
! Clean residual min=-0.002942 max=0.003222 Jy/beam
! Clean residual mean=-0.000001 rms=0.000839 Jy/beam
! Combined flux in latest and established models = 0.0553063 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 54 components and 0.0553063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073963Jy  sigma=0.165078
! Fit after  self-cal, rms=0.073938Jy  sigma=0.165034
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.37079e-05 Jy
! Component: 100  -  total flux cleaned = -0.00015717 Jy
! Component: 150  -  total flux cleaned = -0.000196765 Jy
! Component: 200  -  total flux cleaned = -0.000195633 Jy
! Total flux subtracted in 200 components = -0.000195633 Jy
! Clean residual min=-0.002981 max=0.003076 Jy/beam
! Clean residual mean=-0.000001 rms=0.000812 Jy/beam
! Combined flux in latest and established models = 0.0551106 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 57 components and 0.0551106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073922Jy  sigma=0.164999
! Fit after  self-cal, rms=0.073881Jy  sigma=0.164906
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073881Jy  sigma=0.164906
! Fit after  self-cal, rms=0.073706Jy  sigma=0.164876
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.656 mas, bmaj=12.65 mas, bpa=23.13 degrees
! Estimated noise=5.02767 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000240861 Jy
! Component: 100  -  total flux cleaned = -0.000542069 Jy
! Component: 150  -  total flux cleaned = -0.000731382 Jy
! Component: 200  -  total flux cleaned = -0.000748855 Jy
! Total flux subtracted in 200 components = -0.000748855 Jy
! Clean residual min=-0.002991 max=0.002818 Jy/beam
! Clean residual mean=-0.000001 rms=0.000823 Jy/beam
! Combined flux in latest and established models = 0.0543618 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 70 components and 0.0543618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073684Jy  sigma=0.164831
! Fit after  self-cal, rms=0.073629Jy  sigma=0.164746
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000199521 Jy
! Component: 100  -  total flux cleaned = -0.000380783 Jy
! Component: 150  -  total flux cleaned = -0.000451534 Jy
! Component: 200  -  total flux cleaned = -0.000451449 Jy
! Total flux subtracted in 200 components = -0.000451449 Jy
! Clean residual min=-0.003285 max=0.002894 Jy/beam
! Clean residual mean=-0.000001 rms=0.000857 Jy/beam
! Combined flux in latest and established models = 0.0539104 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 75 components and 0.0539104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073615Jy  sigma=0.164713
! Fit after  self-cal, rms=0.073600Jy  sigma=0.164684
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=8.426 mas, bmaj=11.54 mas, bpa=19.47 degrees
! Estimated noise=4.87733 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.426 x 11.54 at 19.47 degrees (North through East)
! Clean map  min=-0.0092669  max=0.0497 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.208 mas, bmaj=9.792 mas, bpa=12.72 degrees
! Estimated noise=7.96792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0410221 Jy
! Component: 100  -  total flux cleaned = 0.0441237 Jy
! Component: 150  -  total flux cleaned = 0.0484691 Jy
! Component: 200  -  total flux cleaned = 0.0503798 Jy
! Total flux subtracted in 200 components = 0.0503798 Jy
! Clean residual min=-0.005538 max=0.006139 Jy/beam
! Clean residual mean=-0.000001 rms=0.001744 Jy/beam
! Combined flux in latest and established models = 0.0503798 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0503798 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.426 mas, bmaj=11.54 mas, bpa=19.47 degrees
! Estimated noise=4.87733 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00225149 Jy
! Component: 100  -  total flux cleaned = 0.00263752 Jy
! Component: 150  -  total flux cleaned = 0.00282995 Jy
! Component: 200  -  total flux cleaned = 0.00298149 Jy
! Total flux subtracted in 200 components = 0.00298149 Jy
! Clean residual min=-0.003427 max=0.003280 Jy/beam
! Clean residual mean=-0.000001 rms=0.000913 Jy/beam
! Combined flux in latest and established models = 0.0533613 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.0533612 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.656 mas, bmaj=12.65 mas, bpa=23.13 degrees
! Estimated noise=5.02767 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.1792e-05 Jy
! Component: 100  -  total flux cleaned = -4.72434e-05 Jy
! Component: 150  -  total flux cleaned = -1.4324e-05 Jy
! Component: 200  -  total flux cleaned = 1.114e-05 Jy
! Total flux subtracted in 200 components = 1.114e-05 Jy
! Clean residual min=-0.003325 max=0.002797 Jy/beam
! Clean residual mean=-0.000001 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.0533724 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.02947e-05 Jy
! Component: 100  -  total flux cleaned = 3.59194e-05 Jy
! Component: 150  -  total flux cleaned = 2.25968e-05 Jy
! Component: 200  -  total flux cleaned = 2.31627e-05 Jy
! Total flux subtracted in 200 components = 2.31627e-05 Jy
! Clean residual min=-0.003344 max=0.002764 Jy/beam
! Clean residual mean=-0.000001 rms=0.000868 Jy/beam
! Combined flux in latest and established models = 0.0533956 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 48 components and 0.0533955 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.426 mas, bmaj=11.54 mas, bpa=19.47 degrees
! Estimated noise=4.87733 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.36322e-05 Jy
! Component: 100  -  total flux cleaned = 2.65141e-06 Jy
! Component: 150  -  total flux cleaned = 1.3716e-05 Jy
! Component: 200  -  total flux cleaned = 1.34928e-05 Jy
! Total flux subtracted in 200 components = 1.34928e-05 Jy
! Clean residual min=-0.003268 max=0.003079 Jy/beam
! Clean residual mean=-0.000001 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.053409 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 61 components and 0.053409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073601Jy  sigma=0.164696
! Fit after  self-cal, rms=0.073571Jy  sigma=0.164626
wmodel /g0/scr/pima/npcsb_uvs/J1522+7645_S_map.mod
! Writing 61 model components to file: /g0/scr/pima/npcsb_uvs/J1522+7645_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1522+7645_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1522+7645_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1522+7645_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1522+7645_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000709055 Jy
! Component: 100  -  total flux cleaned = -0.00119749 Jy
! Component: 150  -  total flux cleaned = -0.00145429 Jy
! Component: 200  -  total flux cleaned = -0.00149341 Jy
! Component: 250  -  total flux cleaned = -0.00135425 Jy
! Component: 300  -  total flux cleaned = -0.00122668 Jy
! Component: 350  -  total flux cleaned = -0.00110823 Jy
! Component: 400  -  total flux cleaned = -0.00102459 Jy
! Component: 450  -  total flux cleaned = -0.000971126 Jy
! Component: 500  -  total flux cleaned = -0.000920333 Jy
! Component: 550  -  total flux cleaned = -0.000822512 Jy
! Component: 600  -  total flux cleaned = -0.000706292 Jy
! Component: 650  -  total flux cleaned = -0.000683856 Jy
! Component: 700  -  total flux cleaned = -0.000534085 Jy
! Component: 750  -  total flux cleaned = -0.000390389 Jy
! Component: 800  -  total flux cleaned = -0.000310754 Jy
! Component: 850  -  total flux cleaned = -0.00015673 Jy
! Component: 900  -  total flux cleaned = -6.38436e-05 Jy
! Component: 950  -  total flux cleaned = 8.0816e-05 Jy
! Component: 1000  -  total flux cleaned = 0.000204076 Jy
! Component: 1050  -  total flux cleaned = 0.000358464 Jy
! Component: 1100  -  total flux cleaned = 0.000492536 Jy
! Component: 1150  -  total flux cleaned = 0.000656199 Jy
! Component: 1200  -  total flux cleaned = 0.000816538 Jy
! Component: 1250  -  total flux cleaned = 0.000989858 Jy
! Component: 1300  -  total flux cleaned = 0.00112923 Jy
! Component: 1350  -  total flux cleaned = 0.00128186 Jy
! Component: 1400  -  total flux cleaned = 0.00141714 Jy
! Component: 1450  -  total flux cleaned = 0.00150618 Jy
! Component: 1500  -  total flux cleaned = 0.001594 Jy
! Component: 1550  -  total flux cleaned = 0.00165199 Jy
! Component: 1600  -  total flux cleaned = 0.00173772 Jy
! Component: 1650  -  total flux cleaned = 0.00183642 Jy
! Component: 1700  -  total flux cleaned = 0.00192011 Jy
! Component: 1750  -  total flux cleaned = 0.00200282 Jy
! Component: 1800  -  total flux cleaned = 0.00205737 Jy
! Component: 1850  -  total flux cleaned = 0.00212499 Jy
! Component: 1900  -  total flux cleaned = 0.00217859 Jy
! Component: 1950  -  total flux cleaned = 0.00225803 Jy
! Component: 2000  -  total flux cleaned = 0.00234977 Jy
! Component: 2050  -  total flux cleaned = 0.00242778 Jy
! Component: 2100  -  total flux cleaned = 0.00245376 Jy
! Component: 2150  -  total flux cleaned = 0.00251801 Jy
! Component: 2200  -  total flux cleaned = 0.00256924 Jy
! Component: 2250  -  total flux cleaned = 0.00259464 Jy
! Component: 2300  -  total flux cleaned = 0.00264542 Jy
! Component: 2350  -  total flux cleaned = 0.00268335 Jy
! Component: 2400  -  total flux cleaned = 0.00272109 Jy
! Component: 2450  -  total flux cleaned = 0.00274617 Jy
! Component: 2500  -  total flux cleaned = 0.00277115 Jy
! Component: 2550  -  total flux cleaned = 0.00278361 Jy
! Component: 2600  -  total flux cleaned = 0.0028209 Jy
! Component: 2650  -  total flux cleaned = 0.00283324 Jy
! Component: 2700  -  total flux cleaned = 0.00283321 Jy
! Component: 2750  -  total flux cleaned = 0.00288279 Jy
! Component: 2800  -  total flux cleaned = 0.00289522 Jy
! Component: 2850  -  total flux cleaned = 0.0029323 Jy
! Component: 2900  -  total flux cleaned = 0.00294462 Jy
! Component: 2950  -  total flux cleaned = 0.00294458 Jy
! Component: 3000  -  total flux cleaned = 0.00299386 Jy
! Component: 3050  -  total flux cleaned = 0.00299392 Jy
! Component: 3100  -  total flux cleaned = 0.0030063 Jy
! Component: 3150  -  total flux cleaned = 0.0030187 Jy
! Component: 3200  -  total flux cleaned = 0.00301871 Jy
! Component: 3250  -  total flux cleaned = 0.00303105 Jy
! Component: 3300  -  total flux cleaned = 0.00305565 Jy
! Component: 3350  -  total flux cleaned = 0.00306787 Jy
! Component: 3400  -  total flux cleaned = 0.00308016 Jy
! Component: 3450  -  total flux cleaned = 0.00306786 Jy
! Component: 3500  -  total flux cleaned = 0.00308019 Jy
! Component: 3550  -  total flux cleaned = 0.00311702 Jy
! Component: 3600  -  total flux cleaned = 0.0030925 Jy
! Component: 3650  -  total flux cleaned = 0.0031048 Jy
! Component: 3700  -  total flux cleaned = 0.00311706 Jy
! Component: 3750  -  total flux cleaned = 0.00314156 Jy
! Component: 3800  -  total flux cleaned = 0.00312931 Jy
! Component: 3850  -  total flux cleaned = 0.0031662 Jy
! Component: 3900  -  total flux cleaned = 0.00321539 Jy
! Component: 3950  -  total flux cleaned = 0.00322773 Jy
! Component: 4000  -  total flux cleaned = 0.0032771 Jy
! Component: 4050  -  total flux cleaned = 0.00330183 Jy
! Total flux subtracted in 4096 components = 0.00333892 Jy
! Clean residual min=-0.000774 max=0.000731 Jy/beam
! Clean residual mean=0.000000 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.056748 Jy
keep
! Adding 273 model components to the UV plane model.
! The established model now contains 334 components and 0.056748 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1522+7645_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.426 x 11.54 at 19.47 degrees (North through East)
! Clean map  min=-0.0087582  max=0.049116 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1522+7645_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0491156 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000222571 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.35947 1.35947 2.71895 5.43789 10.8758 21.7516 43.5032 87.0063
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.049 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1522+7645_S_uvs.log closed on Wed Sep 25 00:11:56 2013