! Started logfile: /g0/scr/pima/npcsb_uvs/J1422+7704_S_uvs.log on Wed Sep 25 00:11:41 2013
obs /g0/scr/pima/npcsb_uvs/J1422+7704_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1422+7704_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.6 visibilities/baseline/integration-bin.
! Found source: J1422+7704
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23693e+09        8e+06          1        8e+06
!  02        2  2.26693e+09        8e+06          1        8e+06
!  03        3  2.35693e+09        8e+06          1        8e+06
!  04        4  2.37693e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4968 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1422+7704_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.985780Jy  sigma=2.169336
! Fit after  self-cal, rms=0.911012Jy  sigma=2.021077
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.856 mas, bmaj=10.18 mas, bpa=-10.99 degrees
! Estimated noise=9.54415 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0664515 Jy
! Component: 100  -  total flux cleaned = 0.0889492 Jy
! Total flux subtracted in 100 components = 0.0889492 Jy
! Clean residual min=-0.015591 max=0.021637 Jy/beam
! Clean residual mean=0.000148 rms=0.005849 Jy/beam
! Combined flux in latest and established models = 0.0889492 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0889492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118968Jy  sigma=0.238163
! Fit after  self-cal, rms=0.117794Jy  sigma=0.236211
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.894 mas, bmaj=10.3 mas, bpa=-10.2 degrees
! Estimated noise=4.67128 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0235845 Jy
! Component: 100  -  total flux cleaned = 0.0397785 Jy
! Component: 150  -  total flux cleaned = 0.0512952 Jy
! Component: 200  -  total flux cleaned = 0.0595081 Jy
! Total flux subtracted in 200 components = 0.0595081 Jy
! Clean residual min=-0.022983 max=0.022090 Jy/beam
! Clean residual mean=0.000113 rms=0.006578 Jy/beam
! Combined flux in latest and established models = 0.148457 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 48 components and 0.148457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110995Jy  sigma=0.223207
! Fit after  self-cal, rms=0.110654Jy  sigma=0.222355
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.80     HN        1.08     KP        1.33     
!   LA        0.77     MK        0.74     NL        1.06     OV        1.58     
!   PT        0.82     SC        0.89     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.80     HN        1.12     KP        1.18     
!   LA        0.72     MK        0.73     NL        1.08     OV        1.80     
!   PT        0.87     SC        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.34     FD        0.89     HN        1.00     KP        1.08     
!   LA        0.56     MK        0.71     NL        1.27     OV        2.29     
!   PT        1.07     SC        0.87     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        0.84     HN        0.95     KP        1.01     
!   LA        0.52     MK        0.83     NL        1.21     OV        1.98     
!   PT        0.93     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.110654Jy  sigma=0.222355
! Fit after  self-cal, rms=0.131110Jy  sigma=0.202541
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.65 mas, bmaj=10.31 mas, bpa=-8.664 degrees
! Estimated noise=4.48282 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00098195 Jy
! Component: 100  -  total flux cleaned = -0.00125059 Jy
! Component: 150  -  total flux cleaned = -0.00147836 Jy
! Component: 200  -  total flux cleaned = -0.00161741 Jy
! Total flux subtracted in 200 components = -0.00161741 Jy
! Clean residual min=-0.012043 max=0.015253 Jy/beam
! Clean residual mean=0.000001 rms=0.003705 Jy/beam
! Combined flux in latest and established models = 0.14684 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 57 components and 0.14684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.130919Jy  sigma=0.202368
! Fit after  self-cal, rms=0.133422Jy  sigma=0.199904
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.133422Jy  sigma=0.199904
! Fit after  self-cal, rms=0.148468Jy  sigma=0.199655
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.617 mas, bmaj=10.31 mas, bpa=-8.809 degrees
! Estimated noise=4.49047 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000936377 Jy
! Component: 100  -  total flux cleaned = -0.00142634 Jy
! Component: 150  -  total flux cleaned = -0.00156565 Jy
! Component: 200  -  total flux cleaned = -0.00175699 Jy
! Total flux subtracted in 200 components = -0.00175699 Jy
! Clean residual min=-0.012255 max=0.015543 Jy/beam
! Clean residual mean=0.000010 rms=0.003911 Jy/beam
! Combined flux in latest and established models = 0.145083 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 68 components and 0.145083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148308Jy  sigma=0.199554
! Fit after  self-cal, rms=0.148620Jy  sigma=0.199473
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.34416e-06 Jy
! Component: 100  -  total flux cleaned = -4.47952e-06 Jy
! Component: 150  -  total flux cleaned = -0.000200303 Jy
! Component: 200  -  total flux cleaned = -0.000317079 Jy
! Total flux subtracted in 200 components = -0.000317079 Jy
! Clean residual min=-0.012329 max=0.015787 Jy/beam
! Clean residual mean=0.000012 rms=0.003931 Jy/beam
! Combined flux in latest and established models = 0.144766 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 72 components and 0.144766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148512Jy  sigma=0.199401
! Fit after  self-cal, rms=0.148544Jy  sigma=0.199370
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148544Jy  sigma=0.199370
! Fit after  self-cal, rms=0.151026Jy  sigma=0.199322
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.616 mas, bmaj=10.33 mas, bpa=-9.091 degrees
! Estimated noise=4.49353 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00118832 Jy
! Component: 100  -  total flux cleaned = -0.00160838 Jy
! Component: 150  -  total flux cleaned = -0.00179013 Jy
! Component: 200  -  total flux cleaned = -0.00190354 Jy
! Total flux subtracted in 200 components = -0.00190354 Jy
! Clean residual min=-0.012349 max=0.015992 Jy/beam
! Clean residual mean=0.000012 rms=0.003926 Jy/beam
! Combined flux in latest and established models = 0.142862 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 76 components and 0.142862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150905Jy  sigma=0.199274
! Fit after  self-cal, rms=0.150961Jy  sigma=0.199246
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.81589e-05 Jy
! Component: 100  -  total flux cleaned = -4.06113e-05 Jy
! Component: 150  -  total flux cleaned = -9.62305e-05 Jy
! Component: 200  -  total flux cleaned = -0.000144886 Jy
! Total flux subtracted in 200 components = -0.000144886 Jy
! Clean residual min=-0.012430 max=0.016059 Jy/beam
! Clean residual mean=0.000013 rms=0.003926 Jy/beam
! Combined flux in latest and established models = 0.142717 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 77 components and 0.142717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150884Jy  sigma=0.199195
! Fit after  self-cal, rms=0.150906Jy  sigma=0.199176
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150906Jy  sigma=0.199176
! Fit after  self-cal, rms=0.151485Jy  sigma=0.199141
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.968 mas, bmaj=11.85 mas, bpa=-10.08 degrees
! Estimated noise=5.03883 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00286567 Jy
! Component: 100  -  total flux cleaned = -0.0030197 Jy
! Component: 150  -  total flux cleaned = -0.00301951 Jy
! Component: 200  -  total flux cleaned = -0.00301941 Jy
! Total flux subtracted in 200 components = -0.00301941 Jy
! Clean residual min=-0.017112 max=0.020969 Jy/beam
! Clean residual mean=0.000020 rms=0.005628 Jy/beam
! Combined flux in latest and established models = 0.139698 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 81 components and 0.139698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151333Jy  sigma=0.199409
! Fit after  self-cal, rms=0.151353Jy  sigma=0.199242
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00026291 Jy
! Component: 100  -  total flux cleaned = -0.000261783 Jy
! Component: 150  -  total flux cleaned = -0.000260158 Jy
! Component: 200  -  total flux cleaned = -0.000258961 Jy
! Total flux subtracted in 200 components = -0.000258961 Jy
! Clean residual min=-0.017344 max=0.021159 Jy/beam
! Clean residual mean=0.000023 rms=0.005641 Jy/beam
! Combined flux in latest and established models = 0.139439 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 83 components and 0.139439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151261Jy  sigma=0.199508
! Fit after  self-cal, rms=0.151311Jy  sigma=0.199399
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.629 mas, bmaj=10.36 mas, bpa=-9.346 degrees
! Estimated noise=4.49402 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.629 x 10.36 at -9.346 degrees (North through East)
! Clean map  min=-0.012869  max=0.08282 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.599 mas, bmaj=10.01 mas, bpa=-10.25 degrees
! Estimated noise=8.9202 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0617193 Jy
! Component: 100  -  total flux cleaned = 0.088258 Jy
! Component: 150  -  total flux cleaned = 0.105038 Jy
! Component: 200  -  total flux cleaned = 0.116029 Jy
! Total flux subtracted in 200 components = 0.116029 Jy
! Clean residual min=-0.013548 max=0.014710 Jy/beam
! Clean residual mean=0.000057 rms=0.004044 Jy/beam
! Combined flux in latest and established models = 0.116029 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.116029 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.629 mas, bmaj=10.36 mas, bpa=-9.346 degrees
! Estimated noise=4.49402 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00960405 Jy
! Component: 100  -  total flux cleaned = 0.0138011 Jy
! Component: 150  -  total flux cleaned = 0.0151337 Jy
! Component: 200  -  total flux cleaned = 0.0162286 Jy
! Total flux subtracted in 200 components = 0.0162286 Jy
! Clean residual min=-0.012838 max=0.015899 Jy/beam
! Clean residual mean=0.000033 rms=0.004148 Jy/beam
! Combined flux in latest and established models = 0.132258 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 60 components and 0.132258 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.968 mas, bmaj=11.85 mas, bpa=-10.08 degrees
! Estimated noise=5.03883 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190817 Jy
! Component: 100  -  total flux cleaned = 0.00267734 Jy
! Component: 150  -  total flux cleaned = 0.0031899 Jy
! Component: 200  -  total flux cleaned = 0.00330303 Jy
! Total flux subtracted in 200 components = 0.00330303 Jy
! Clean residual min=-0.017821 max=0.021065 Jy/beam
! Clean residual mean=0.000040 rms=0.005755 Jy/beam
! Combined flux in latest and established models = 0.135561 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107792 Jy
! Component: 100  -  total flux cleaned = 0.000210952 Jy
! Component: 150  -  total flux cleaned = 0.000305408 Jy
! Component: 200  -  total flux cleaned = 0.000396644 Jy
! Total flux subtracted in 200 components = 0.000396644 Jy
! Clean residual min=-0.017833 max=0.021055 Jy/beam
! Clean residual mean=0.000038 rms=0.005716 Jy/beam
! Combined flux in latest and established models = 0.135957 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 72 components and 0.135957 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.629 mas, bmaj=10.36 mas, bpa=-9.346 degrees
! Estimated noise=4.49402 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000302769 Jy
! Component: 100  -  total flux cleaned = 0.000173446 Jy
! Component: 150  -  total flux cleaned = 0.000179948 Jy
! Component: 200  -  total flux cleaned = 0.00026911 Jy
! Total flux subtracted in 200 components = 0.00026911 Jy
! Clean residual min=-0.013003 max=0.015941 Jy/beam
! Clean residual mean=0.000025 rms=0.004014 Jy/beam
! Combined flux in latest and established models = 0.136226 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 89 components and 0.136226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151642Jy  sigma=0.199834
! Fit after  self-cal, rms=0.151568Jy  sigma=0.199612
wmodel /g0/scr/pima/npcsb_uvs/J1422+7704_S_map.mod
! Writing 89 model components to file: /g0/scr/pima/npcsb_uvs/J1422+7704_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1422+7704_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1422+7704_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1422+7704_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1422+7704_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00714254 Jy
! Component: 100  -  total flux cleaned = 0.0119423 Jy
! Component: 150  -  total flux cleaned = 0.0135958 Jy
! Component: 200  -  total flux cleaned = 0.0147087 Jy
! Component: 250  -  total flux cleaned = 0.0153852 Jy
! Component: 300  -  total flux cleaned = 0.016332 Jy
! Component: 350  -  total flux cleaned = 0.0170769 Jy
! Component: 400  -  total flux cleaned = 0.0182028 Jy
! Component: 450  -  total flux cleaned = 0.0184735 Jy
! Component: 500  -  total flux cleaned = 0.0188623 Jy
! Component: 550  -  total flux cleaned = 0.0189859 Jy
! Component: 600  -  total flux cleaned = 0.0189838 Jy
! Component: 650  -  total flux cleaned = 0.0189842 Jy
! Component: 700  -  total flux cleaned = 0.0190931 Jy
! Component: 750  -  total flux cleaned = 0.0191967 Jy
! Component: 800  -  total flux cleaned = 0.019402 Jy
! Component: 850  -  total flux cleaned = 0.0195044 Jy
! Component: 900  -  total flux cleaned = 0.0197926 Jy
! Component: 950  -  total flux cleaned = 0.0199798 Jy
! Component: 1000  -  total flux cleaned = 0.0199821 Jy
! Component: 1050  -  total flux cleaned = 0.0202456 Jy
! Component: 1100  -  total flux cleaned = 0.0205029 Jy
! Component: 1150  -  total flux cleaned = 0.0209174 Jy
! Component: 1200  -  total flux cleaned = 0.0209173 Jy
! Component: 1250  -  total flux cleaned = 0.0212355 Jy
! Component: 1300  -  total flux cleaned = 0.0213884 Jy
! Component: 1350  -  total flux cleaned = 0.0217668 Jy
! Component: 1400  -  total flux cleaned = 0.0222842 Jy
! Component: 1450  -  total flux cleaned = 0.0228604 Jy
! Component: 1500  -  total flux cleaned = 0.023073 Jy
! Component: 1550  -  total flux cleaned = 0.0234213 Jy
! Component: 1600  -  total flux cleaned = 0.0240331 Jy
! Component: 1650  -  total flux cleaned = 0.0243006 Jy
! Component: 1700  -  total flux cleaned = 0.0247599 Jy
! Component: 1750  -  total flux cleaned = 0.0251473 Jy
! Component: 1800  -  total flux cleaned = 0.025465 Jy
! Component: 1850  -  total flux cleaned = 0.0258391 Jy
! Component: 1900  -  total flux cleaned = 0.0261464 Jy
! Component: 1950  -  total flux cleaned = 0.0266286 Jy
! Component: 2000  -  total flux cleaned = 0.0268662 Jy
! Component: 2050  -  total flux cleaned = 0.0273337 Jy
! Component: 2100  -  total flux cleaned = 0.0277934 Jy
! Component: 2150  -  total flux cleaned = 0.0280194 Jy
! Component: 2200  -  total flux cleaned = 0.0284665 Jy
! Component: 2250  -  total flux cleaned = 0.0288523 Jy
! Component: 2300  -  total flux cleaned = 0.029124 Jy
! Component: 2350  -  total flux cleaned = 0.0294456 Jy
! Component: 2400  -  total flux cleaned = 0.0296572 Jy
! Component: 2450  -  total flux cleaned = 0.0300216 Jy
! Component: 2500  -  total flux cleaned = 0.030176 Jy
! Component: 2550  -  total flux cleaned = 0.0304816 Jy
! Component: 2600  -  total flux cleaned = 0.0307327 Jy
! Component: 2650  -  total flux cleaned = 0.0309808 Jy
! Component: 2700  -  total flux cleaned = 0.0312254 Jy
! Component: 2750  -  total flux cleaned = 0.0314196 Jy
! Component: 2800  -  total flux cleaned = 0.0318019 Jy
! Component: 2850  -  total flux cleaned = 0.0319907 Jy
! Component: 2900  -  total flux cleaned = 0.0323175 Jy
! Component: 2950  -  total flux cleaned = 0.0326403 Jy
! Component: 3000  -  total flux cleaned = 0.0327767 Jy
! Component: 3050  -  total flux cleaned = 0.0330931 Jy
! Component: 3100  -  total flux cleaned = 0.0333167 Jy
! Component: 3150  -  total flux cleaned = 0.0335378 Jy
! Component: 3200  -  total flux cleaned = 0.0338003 Jy
! Component: 3250  -  total flux cleaned = 0.0340169 Jy
! Component: 3300  -  total flux cleaned = 0.0341457 Jy
! Component: 3350  -  total flux cleaned = 0.0343161 Jy
! Component: 3400  -  total flux cleaned = 0.0345686 Jy
! Component: 3450  -  total flux cleaned = 0.0346943 Jy
! Component: 3500  -  total flux cleaned = 0.0349427 Jy
! Component: 3550  -  total flux cleaned = 0.0351883 Jy
! Component: 3600  -  total flux cleaned = 0.03531 Jy
! Component: 3650  -  total flux cleaned = 0.0355514 Jy
! Component: 3700  -  total flux cleaned = 0.0357509 Jy
! Component: 3750  -  total flux cleaned = 0.0359092 Jy
! Component: 3800  -  total flux cleaned = 0.0361059 Jy
! Component: 3850  -  total flux cleaned = 0.0363395 Jy
! Component: 3900  -  total flux cleaned = 0.0365329 Jy
! Component: 3950  -  total flux cleaned = 0.0368018 Jy
! Component: 4000  -  total flux cleaned = 0.0369922 Jy
! Component: 4050  -  total flux cleaned = 0.0372571 Jy
! Total flux subtracted in 4096 components = 0.0375197 Jy
! Clean residual min=-0.001892 max=0.001918 Jy/beam
! Clean residual mean=0.000006 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.173746 Jy
keep
! Adding 446 model components to the UV plane model.
! The established model now contains 535 components and 0.173746 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1422+7704_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.629 x 10.36 at -9.346 degrees (North through East)
! Clean map  min=-0.0069256  max=0.083003 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1422+7704_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0830028 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000806186 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.91383 2.91383 5.82765 11.6553 23.3106 46.6212 93.2425
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0024 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.083 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1422+7704_S_uvs.log closed on Wed Sep 25 00:11:46 2013