! Started logfile: /g0/scr/pima/npcsb_uvs/J1358+8340_X_uvs.log on Wed Sep 25 00:05:59 2013 obs /g0/scr/pima/npcsb_uvs/J1358+8340_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1358+8340_X_uva.fits ! AN table 1: 46 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.738354 visibilities/baseline/integration-bin. ! Found source: J1358+8340 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40993e+09 8e+06 1 8e+06 ! 02 2 8.47993e+09 8e+06 1 8e+06 ! 03 3 8.79493e+09 8e+06 1 8e+06 ! 04 4 8.89993e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3804 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1358+8340_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003967Jy sigma=2.401228 ! Fit after self-cal, rms=0.940893Jy sigma=2.241894 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.598 mas, bmaj=3.267 mas, bpa=-25.24 degrees ! Estimated noise=11.9863 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0495262 Jy ! Component: 100 - total flux cleaned = 0.0617231 Jy ! Total flux subtracted in 100 components = 0.0617231 Jy ! Clean residual min=-0.009831 max=0.009303 Jy/beam ! Clean residual mean=-0.000004 rms=0.002552 Jy/beam ! Combined flux in latest and established models = 0.0617232 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0617232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077039Jy sigma=0.173563 ! Fit after self-cal, rms=0.075817Jy sigma=0.170195 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.07 mas, bmaj=3.551 mas, bpa=-22.39 degrees ! Estimated noise=4.89606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00649816 Jy ! Component: 100 - total flux cleaned = 0.0101353 Jy ! Component: 150 - total flux cleaned = 0.0123184 Jy ! Component: 200 - total flux cleaned = 0.0132574 Jy ! Total flux subtracted in 200 components = 0.0132574 Jy ! Clean residual min=-0.004074 max=0.003391 Jy/beam ! Clean residual mean=-0.000004 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.0749806 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 47 components and 0.0749806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075287Jy sigma=0.168680 ! Fit after self-cal, rms=0.075207Jy sigma=0.168462 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.97 HN 1.03 KP 1.09 ! LA 1.02 NL 1.06 OV 1.09 PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 1.03 KP 0.94 ! LA 1.00 NL 0.98 OV 0.92 PT 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.86 KP 0.94 ! LA 0.93 NL 0.99 OV 0.98 PT 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.79 KP 0.94 ! LA 1.03 NL 1.00 OV 0.86 PT 1.01 ! ! ! Fit before self-cal, rms=0.075207Jy sigma=0.168462 ! Fit after self-cal, rms=0.072469Jy sigma=0.167948 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.047 mas, bmaj=3.517 mas, bpa=-22.56 degrees ! Estimated noise=4.75053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248998 Jy ! Component: 100 - total flux cleaned = 0.00261794 Jy ! Component: 150 - total flux cleaned = 0.00256904 Jy ! Component: 200 - total flux cleaned = 0.00253127 Jy ! Total flux subtracted in 200 components = 0.00253127 Jy ! Clean residual min=-0.002986 max=0.003382 Jy/beam ! Clean residual mean=-0.000005 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.0775119 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 0.0775119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072365Jy sigma=0.167652 ! Fit after self-cal, rms=0.072300Jy sigma=0.167364 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072300Jy sigma=0.167364 ! Fit after self-cal, rms=0.071637Jy sigma=0.167307 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.036 mas, bmaj=3.495 mas, bpa=-22.62 degrees ! Estimated noise=4.69663 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112816 Jy ! Component: 100 - total flux cleaned = 0.0012657 Jy ! Component: 150 - total flux cleaned = 0.00122925 Jy ! Component: 200 - total flux cleaned = 0.00122976 Jy ! Total flux subtracted in 200 components = 0.00122976 Jy ! Clean residual min=-0.002612 max=0.003022 Jy/beam ! Clean residual mean=-0.000005 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.0787416 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.0787416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071589Jy sigma=0.167171 ! Fit after self-cal, rms=0.071607Jy sigma=0.167149 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261137 Jy ! Component: 100 - total flux cleaned = 0.000232139 Jy ! Component: 150 - total flux cleaned = 0.000182113 Jy ! Component: 200 - total flux cleaned = 0.0002259 Jy ! Total flux subtracted in 200 components = 0.0002259 Jy ! Clean residual min=-0.002621 max=0.002932 Jy/beam ! Clean residual mean=-0.000005 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.0789675 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 68 components and 0.0789675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071589Jy sigma=0.167098 ! Fit after self-cal, rms=0.071589Jy sigma=0.167091 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071589Jy sigma=0.167091 ! Fit after self-cal, rms=0.070914Jy sigma=0.167063 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.027 mas, bmaj=3.494 mas, bpa=-22.63 degrees ! Estimated noise=4.64023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.46232e-05 Jy ! Component: 100 - total flux cleaned = -6.59564e-05 Jy ! Component: 150 - total flux cleaned = -6.79963e-05 Jy ! Component: 200 - total flux cleaned = -2.89446e-05 Jy ! Total flux subtracted in 200 components = -2.89446e-05 Jy ! Clean residual min=-0.002410 max=0.002761 Jy/beam ! Clean residual mean=-0.000005 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.0789386 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.0789386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070894Jy sigma=0.167025 ! Fit after self-cal, rms=0.070880Jy sigma=0.166950 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135532 Jy ! Component: 100 - total flux cleaned = 0.000194476 Jy ! Component: 150 - total flux cleaned = 0.000266127 Jy ! Component: 200 - total flux cleaned = 0.000348245 Jy ! Total flux subtracted in 200 components = 0.000348245 Jy ! Clean residual min=-0.002547 max=0.002530 Jy/beam ! Clean residual mean=-0.000004 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.0792868 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 80 components and 0.0792868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070869Jy sigma=0.166921 ! Fit after self-cal, rms=0.070870Jy sigma=0.166917 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070870Jy sigma=0.166917 ! Fit after self-cal, rms=0.070176Jy sigma=0.166902 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=3.674 mas, bpa=-9.915 degrees ! Estimated noise=4.78963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.16942e-05 Jy ! Component: 100 - total flux cleaned = -0.000116076 Jy ! Component: 150 - total flux cleaned = -0.000116572 Jy ! Component: 200 - total flux cleaned = -0.000131951 Jy ! Total flux subtracted in 200 components = -0.000131951 Jy ! Clean residual min=-0.002309 max=0.002443 Jy/beam ! Clean residual mean=-0.000005 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.0791549 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 85 components and 0.0791549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070161Jy sigma=0.166883 ! Fit after self-cal, rms=0.070168Jy sigma=0.166877 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171354 Jy ! Component: 100 - total flux cleaned = 0.000186505 Jy ! Component: 150 - total flux cleaned = 0.000186285 Jy ! Component: 200 - total flux cleaned = 0.000197025 Jy ! Total flux subtracted in 200 components = 0.000197025 Jy ! Clean residual min=-0.002299 max=0.002392 Jy/beam ! Clean residual mean=-0.000005 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.0793519 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 91 components and 0.0793519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070163Jy sigma=0.166866 ! Fit after self-cal, rms=0.070161Jy sigma=0.166863 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.021 mas, bmaj=3.5 mas, bpa=-22.64 degrees ! Estimated noise=4.58741 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.021 x 3.5 at -22.64 degrees (North through East) ! Clean map min=-0.002534 max=0.061588 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.556 mas, bmaj=3.274 mas, bpa=-25.48 degrees ! Estimated noise=10.9319 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0446922 Jy ! Component: 100 - total flux cleaned = 0.0581101 Jy ! Component: 150 - total flux cleaned = 0.0668624 Jy ! Component: 200 - total flux cleaned = 0.0727928 Jy ! Total flux subtracted in 200 components = 0.0727928 Jy ! Clean residual min=-0.007324 max=0.006703 Jy/beam ! Clean residual mean=-0.000004 rms=0.002004 Jy/beam ! Combined flux in latest and established models = 0.0727928 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0727928 Jy ! Inverting map and beam ! Estimated beam: bmin=2.021 mas, bmaj=3.5 mas, bpa=-22.64 degrees ! Estimated noise=4.58741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00367754 Jy ! Component: 100 - total flux cleaned = 0.00435793 Jy ! Component: 150 - total flux cleaned = 0.00503416 Jy ! Component: 200 - total flux cleaned = 0.00524187 Jy ! Total flux subtracted in 200 components = 0.00524187 Jy ! Clean residual min=-0.002960 max=0.002994 Jy/beam ! Clean residual mean=-0.000005 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.0780347 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 41 components and 0.0780347 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=3.674 mas, bpa=-9.915 degrees ! Estimated noise=4.78963 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000647923 Jy ! Component: 100 - total flux cleaned = 0.000729376 Jy ! Component: 150 - total flux cleaned = 0.000763777 Jy ! Component: 200 - total flux cleaned = 0.000825496 Jy ! Total flux subtracted in 200 components = 0.000825496 Jy ! Clean residual min=-0.002726 max=0.002653 Jy/beam ! Clean residual mean=-0.000006 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.0788601 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.73997e-05 Jy ! Component: 100 - total flux cleaned = 7.88996e-05 Jy ! Component: 150 - total flux cleaned = 0.000125929 Jy ! Component: 200 - total flux cleaned = 0.000147289 Jy ! Total flux subtracted in 200 components = 0.000147289 Jy ! Clean residual min=-0.002575 max=0.002538 Jy/beam ! Clean residual mean=-0.000005 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.0790074 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 60 components and 0.0790074 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.021 mas, bmaj=3.5 mas, bpa=-22.64 degrees ! Estimated noise=4.58741 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.62809e-05 Jy ! Component: 100 - total flux cleaned = 0.000106557 Jy ! Component: 150 - total flux cleaned = 0.00022274 Jy ! Component: 200 - total flux cleaned = 0.0003571 Jy ! Total flux subtracted in 200 components = 0.0003571 Jy ! Clean residual min=-0.002655 max=0.002605 Jy/beam ! Clean residual mean=-0.000004 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.0793645 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 65 components and 0.0793645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070184Jy sigma=0.166928 ! Fit after self-cal, rms=0.070158Jy sigma=0.166902 wmodel /g0/scr/pima/npcsb_uvs/J1358+8340_X_map.mod ! Writing 65 model components to file: /g0/scr/pima/npcsb_uvs/J1358+8340_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J1358+8340_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1358+8340_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1358+8340_X_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1358+8340_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00022616 Jy ! Component: 100 - total flux cleaned = -7.1023e-05 Jy ! Component: 150 - total flux cleaned = 0.0002532 Jy ! Component: 200 - total flux cleaned = 0.000588551 Jy ! Component: 250 - total flux cleaned = 0.000936552 Jy ! Component: 300 - total flux cleaned = 0.00120538 Jy ! Component: 350 - total flux cleaned = 0.00126333 Jy ! Component: 400 - total flux cleaned = 0.00129186 Jy ! Component: 450 - total flux cleaned = 0.00131868 Jy ! Component: 500 - total flux cleaned = 0.00126855 Jy ! Component: 550 - total flux cleaned = 0.0012693 Jy ! Component: 600 - total flux cleaned = 0.00124601 Jy ! Component: 650 - total flux cleaned = 0.00126942 Jy ! Component: 700 - total flux cleaned = 0.00129171 Jy ! Component: 750 - total flux cleaned = 0.00124708 Jy ! Component: 800 - total flux cleaned = 0.0011823 Jy ! Component: 850 - total flux cleaned = 0.0011612 Jy ! Component: 900 - total flux cleaned = 0.00105716 Jy ! Component: 950 - total flux cleaned = 0.000955241 Jy ! Component: 1000 - total flux cleaned = 0.000895282 Jy ! Component: 1050 - total flux cleaned = 0.000797419 Jy ! Component: 1100 - total flux cleaned = 0.000701736 Jy ! Component: 1150 - total flux cleaned = 0.000701927 Jy ! Component: 1200 - total flux cleaned = 0.000646102 Jy ! Component: 1250 - total flux cleaned = 0.00064626 Jy ! Component: 1300 - total flux cleaned = 0.000664118 Jy ! Component: 1350 - total flux cleaned = 0.000664119 Jy ! Component: 1400 - total flux cleaned = 0.000698866 Jy ! Component: 1450 - total flux cleaned = 0.00066414 Jy ! Component: 1500 - total flux cleaned = 0.000647366 Jy ! Component: 1550 - total flux cleaned = 0.000597096 Jy ! Component: 1600 - total flux cleaned = 0.000564082 Jy ! Component: 1650 - total flux cleaned = 0.000548131 Jy ! Component: 1700 - total flux cleaned = 0.000548146 Jy ! Component: 1750 - total flux cleaned = 0.000516148 Jy ! Component: 1800 - total flux cleaned = 0.000468608 Jy ! Component: 1850 - total flux cleaned = 0.000405885 Jy ! Component: 1900 - total flux cleaned = 0.000359315 Jy ! Component: 1950 - total flux cleaned = 0.000282307 Jy ! Component: 2000 - total flux cleaned = 0.000236534 Jy ! Component: 2050 - total flux cleaned = 0.000191227 Jy ! Component: 2100 - total flux cleaned = 0.000176262 Jy ! Component: 2150 - total flux cleaned = 0.000101819 Jy ! Component: 2200 - total flux cleaned = 0.00010181 Jy ! Component: 2250 - total flux cleaned = 1.36002e-05 Jy ! Component: 2300 - total flux cleaned = -7.37825e-05 Jy ! Component: 2350 - total flux cleaned = -8.81041e-05 Jy ! Component: 2400 - total flux cleaned = -0.000145608 Jy ! Component: 2450 - total flux cleaned = -0.000174259 Jy ! Component: 2500 - total flux cleaned = -0.000216699 Jy ! Component: 2550 - total flux cleaned = -0.000287029 Jy ! Component: 2600 - total flux cleaned = -0.000287044 Jy ! Component: 2650 - total flux cleaned = -0.000314819 Jy ! Component: 2700 - total flux cleaned = -0.000314743 Jy ! Component: 2750 - total flux cleaned = -0.000355868 Jy ! Component: 2800 - total flux cleaned = -0.000355964 Jy ! Component: 2850 - total flux cleaned = -0.000410274 Jy ! Component: 2900 - total flux cleaned = -0.000383306 Jy ! Component: 2950 - total flux cleaned = -0.000410236 Jy ! Component: 3000 - total flux cleaned = -0.00041016 Jy ! Component: 3050 - total flux cleaned = -0.000383446 Jy ! Component: 3100 - total flux cleaned = -0.000383482 Jy ! Component: 3150 - total flux cleaned = -0.000356974 Jy ! Component: 3200 - total flux cleaned = -0.000356995 Jy ! Component: 3250 - total flux cleaned = -0.000304249 Jy ! Component: 3300 - total flux cleaned = -0.000304221 Jy ! Component: 3350 - total flux cleaned = -0.000278021 Jy ! Component: 3400 - total flux cleaned = -0.000225735 Jy ! Component: 3450 - total flux cleaned = -0.000225758 Jy ! Component: 3500 - total flux cleaned = -0.00022578 Jy ! Component: 3550 - total flux cleaned = -0.000212847 Jy ! Component: 3600 - total flux cleaned = -0.000199931 Jy ! Component: 3650 - total flux cleaned = -0.000187085 Jy ! Component: 3700 - total flux cleaned = -0.000187095 Jy ! Component: 3750 - total flux cleaned = -0.000174181 Jy ! Component: 3800 - total flux cleaned = -0.000148543 Jy ! Component: 3850 - total flux cleaned = -0.000135807 Jy ! Component: 3900 - total flux cleaned = -0.000110249 Jy ! Component: 3950 - total flux cleaned = -0.00012301 Jy ! Component: 4000 - total flux cleaned = -9.76689e-05 Jy ! Component: 4050 - total flux cleaned = -0.000110313 Jy ! Total flux subtracted in 4096 components = -0.000123065 Jy ! Clean residual min=-0.000808 max=0.000812 Jy/beam ! Clean residual mean=-0.000002 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.0792415 Jy keep ! Adding 223 model components to the UV plane model. ! The established model now contains 288 components and 0.0792415 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1358+8340_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.021 x 3.5 at -22.64 degrees (North through East) ! Clean map min=-0.0015028 max=0.06077 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1358+8340_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0607697 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000213313 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05306 1.05306 2.10611 4.21222 8.42444 16.8489 33.6978 67.3956 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1358+8340_X_uvs.log closed on Wed Sep 25 00:06:04 2013